- 08 11月, 2012 15 次提交
-
-
由 Philipp Reisner 提交于
That is necessary since the whole transfer log is per connection(tconn) and not per device(mdev). This bug caused list corruption on the worker list. When a barrier is queued for sending in the context of one device, another device did not see the CREATE_BARRIER bit, and queued the same object again -> list corruption. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Since version 4.6.1 gcc warns about variables that get a value assigned, but which are never read later on. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
In case we can not find out why the request takes too long (happens e.g. when IO got suspended on DRBD level). rearm the timer with a reasonable value. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
* drbd-8.3: documentation: Documented detach's --force and disk's --disk-timeout drbd: Implemented the disk-timeout option drbd: Force flag for the detach operation drbd: Allow new IOs while the local disk in in FAILED state drbd: Bitmap IO functions can not return prematurely if the disk breaks drbd: Added a kref to bm_aio_ctx drbd: Hold a reference to ldev while doing meta-data IO drbd: Keep a reference to the bio until the completion handler finished drbd: Implemented wait_until_done_or_disk_failure() drbd: Replaced md_io_mutex by an atomic: md_io_in_use drbd: moved md_io into mdev drbd: Immediately allow completion of IOs, that wait for IO completions on a failed disk drbd: Keep a reference to barrier acked requests Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Removing the get_net_conf()/put_net_conf() calls Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
The wire protocol is no longer a property that is negotiated between the two peers. It is now expressed with two bits (DP_SEND_WRITE_ACK and DP_SEND_RECEIVE_ACK) in each data packet. Therefore the primary node is free to change the wire protocol at any time without disconnect/reconnect. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
Where "arbitrary" size is currently 1 MiB, which is the BIO_MAX_SIZE for architectures with 4k PAGE_CACHE_SIZE (most). Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
We want to avoid bio_split for bios crossing activity log boundaries. So we may need to activate two activity log extents "atomically". drbd_al_begin_io() needs to know more than just the start sector. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
This is also checked further below in the same function. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
- 14 10月, 2011 7 次提交
-
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Opening a device only succeeds on a primary node, or when explicitly setting the allow_oos module parameter to allow opening the device read-only on a secondary node. There is no other way that a request can get into drbd_make_request(), so this code cannot trigger. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
The previous algorithm for dealing with overlapping concurrent writes was generating unnecessary warnings for scenarios which could be legitimate, and did not always handle partially overlapping requests correctly. Improve it algorithm as follows: * While local or remote write requests are in progress, conflicting new local write requests will be delayed (commit 82172f7). * When a conflict between a local and remote write request is detected, the node with the discard flag decides how to resolve the conflict: It will ask its peer to discard conflicting requests which are fully contained in the local request and retry requests which overlap only partially. This involves a protocol change. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Lars Ellenberg 提交于
fold if (x >= (N+1)) return 0; if (x < N) return 0; into if (x != N) return 0; Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
- 28 9月, 2011 7 次提交
-
-
由 Philipp Reisner 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Before submitting a new local write request, wait for any conflicting local or remote requests to complete. We could assume that the new request occurred first and that the conflicting requests overwrote it (and therefore discard the new reques), but we know for sure that the new request occurred after the conflicting requests and so this behavior would we weird. We would also end up with the wrong result if the new request is not fully contained within the conflicting requests. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Nothing in this function accesses mdev->tconn->net_conf, so there is no need for get_net_conf() / put_net_conf() anymore. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Instead of keeping a separate tree for local and remote write requests for finding requests and for conflict detection, use the same tree for both purposes. Introduce a flag to allow distinguishing the two possible types of entries in this tree. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
This flag is set when a processes puts itself to sleep to wait for a conflicting request to complete. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Move drbd_update_congested() to drbd_main.c, and drbd_req_new() and drbd_req_free() to drbd_req.c: those functions are not used anywhere else. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
- 29 8月, 2011 10 次提交
-
-
由 Philipp Reisner 提交于
sed -i \ -e 's/mdev->req_lock/mdev->tconn->req_lock/g' \ -e 's/mdev->unused_spare_tle/mdev->tconn->unused_spare_tle/g' \ -e 's/mdev->newest_tle/mdev->tconn->newest_tle/g' \ -e 's/mdev->oldest_tle/mdev->tconn->oldest_tle/g' \ -e 's/mdev->out_of_sequence_requests/mdev->tconn->out_of_sequence_requests/g' \ *.[ch] Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
sed -i \ -e 's/mdev->agreed_pro_version/mdev->tconn->agreed_pro_version/g' \ -e 's/mdev->last_received/mdev->tconn->last_received/g' \ -e 's/mdev->ko_count/mdev->tconn->ko_count/g' \ *.[ch] Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Patch mostly: sed -i -e 's/mdev->data/mdev->tconn->data/g' \ -e 's/mdev->meta/mdev->tconn->meta/g' \ *.[ch] Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Patch partly generated by: sed -i -e 's/get_net_conf(mdev)/get_net_conf(mdev->tconn)/g' \ -e 's/put_net_conf(mdev)/put_net_conf(mdev->tconn)/g' \ -e 's/get_net_conf(odev)/get_net_conf(odev->tconn)/g' \ -e 's/put_net_conf(odev)/put_net_conf(odev->tconn)/g' \ *.[ch] Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Philipp Reisner 提交于
Besides moving the struct member, everything else is generated by: sed -i -e 's/mdev->net_conf/mdev->tconn->net_conf/g' \ -e 's/odev->net_conf/odev->tconn->net_conf/g' \ *.[ch] Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
由 Andreas Gruenbacher 提交于
We do not do collision detection for read requests, but we still need to look up the request objects when we receive a package over the network. Using the same data structure for read and write requests results in simpler code once the tl_hash and app_reads_hash tables are removed. Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-
- 25 8月, 2011 1 次提交
-
-
由 Andreas Gruenbacher 提交于
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com> Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
-