Initialize qc->pad_len for each new command. This ensures
that pad_len is not set to a stale value for zero data
length commands.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fixup the inialization of qc->n_elem. It currently gets
initialized to 1 for commands that do not transfer any data.
Fix this by initializing n_elem to 0 and only setting to 1
in ata_scsi_qc_new when there is data to transfer. This fixes
some problems seen with SATA devices attached to ipr adapters.
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Some ATA/ATAPI devices act weirdly after the link is put into slumber
mode.  Some hang completely requiring physical power removal while
others fail to wake up till the link is hardreset a couple of times.

The addition of slumber on power down was never driven by real need.
It just followed what ahci spec said literally.  The spec itself seems
faulty in that it doesn't consider devices (not controllers) which
don't support link powersaving mode.

Theory never matches reality when it comes to dark allys of cheap
ATA/ATAPI world.  It's just unrealistic to expect vendors to test
rarely used link powersaving feature rigorously.  This patch makes
ahci more friendly to the coldness of reality.

This shouldn't have any negative effect - when suspend operation
succeeds, we power off the whole machine; otherwise, we wake up
everything.  I can't see any reason to be so elaborate with powering
down the link in the first place.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Several people reported issues with certain drive commands timing out on
sata_nv controllers running in ADMA mode. The commands in question were
non-DMA-mapped commands, usually FLUSH CACHE or FLUSH CACHE EXT.

 From experimentation it appears that the NV_INT_DEV indication isn't
always set when a legitimate command completion interrupt is received on
a legacy-mode command, at least not on these controllers in ADMA mode.
When a command is pending on the port, force the flag on always in the
irq_stat value before calling nv_host_intr so that the drive busy state
is always checked by ata_host_intr.

This also fixes some questionable code in nv_host_intr which called
ata_check_status when a command was pending and ata_host_intr returned
"unhandled". If the device interrupted at just the wrong time this could
cause interrupts to be lost.
Signed-off-by: NRobert Hancock <hancockr@shaw.ca>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

As with JMicron controllers, ULi M5288 sets interface fatal error bit
on device error including ATAPI CC.  This makes libata hardreset the
port on ATAPI CC thus making it impossible to use.  Ignore interface
fatal error bit on ULi M5288.  This fixes bugzilla bug #7837.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

We are doing ->buf_prepare(buf) before adding buf to q->stream list. This
means that videobuf_qbuf() should not try to re-add a STATE_PREPARED buffer.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This changes a few mentions of my email address to point to the new one,
leaving things like old copyright messages alone.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change my email address to reflect OSDL merger.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
[ The irony. Somebody still has his sign-off message hardcoded
  in a script or his brainstem ;^]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Any newly added irq handler may obviously make any old spurious irq
status invalid, since the new handler may well be the thing that is
supposed to handle any interrupts that came in.

So just clear the statistics when adding handlers.
Pointed-out-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Vr41xx: Fix after GENERIC_HARDIRQS_NO__DO_IRQ change
  [MIPS] SMTC: Instant IPI replay.

As written, sys_shmget will return ENOSPC when one page is still
available for allocation. This patch corrects the test.
Signed-off-by: NGuy Streeter <guy.streeter+lkml@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
--

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Fix mismatched spin_unlock in irq handler
  IB/ehca: Fix improper use of yield() with spinlock held
  IB/srp: Check match_strdup() return

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memset() after kmalloc() on size * 8 would better be on size * 8, not
just size; fixed by switching to kcalloc() - it's more idiomatic anyway.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

while lock-profiling the -rt kernel i noticed weird contention during
mmap-intense workloads, and the tracer showed the following gem, in one
of our MM hotpaths:

 threaded-2771  1....   65us : sys_munmap (sysenter_do_call)
 threaded-2771  1....   66us : profile_munmap (sys_munmap)
 threaded-2771  1....   66us : blocking_notifier_call_chain (profile_munmap)
 threaded-2771  1....   66us : rt_down_read (blocking_notifier_call_chain)

ouch! a global rw-semaphore taken in one of the most performance-
sensitive codepaths of the kernel.  And i dont even have oprofile
enabled! All distro kernels have CONFIG_PROFILING enabled, so this
scalability problem affects the majority of Linux users.

The fix is to enhance blocking_notifier_call_chain() to only take the
lock if there appears to be work on the call-chain.

With this patch applied i get nicely saturated system, and much higher
munmap performance, on SMP systems.

And as a bonus this also fixes a similar scalability bottleneck in the
thread-exit codepath: profile_task_exit() ...
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa:
  [ALSA] Repair snd-usb-usx2y over OHCI

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  NetXen: Use pci_register_driver() instead of pci_module_init() in init_module
  NetXen: Firmware check modifications
  ehea: Fixed possible nullpointer access
  ehea: Added logging off associated errors
  ehea: Improved logging of permission issues
  ehea: New method to determine number of available ports
  ehea: Modified initial autoneg state determination
  ehea: Fixing firmware queue config issue
  ehea: Fixed wrong dereferencation
  PHY: Export phy ethtool helpers
  modify 3c589_cs to be SMP safe

* 'ftape' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  more ftape removal

* 'kill-jffs-prep' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  Note that JFFS (v1) is to be deleted, in feature-removal-schedule.txt

A flag was recently added to the elevator code to avoid
performing an unplug when reuests are being re-queued.
The goal of this flag was to avoid a deep recursion that
can occur when re-queueing requests after a SCSI device/host
reset.  See http://lkml.org/lkml/2006/5/17/254

However, that fix added the flag near the bottom of a case
statement, where an earlier break (in an if statement) could
transport one out of the case, without setting the flag.
This patch sets the flag earlier in the case statement.

I re-discovered the deep recursion recently during testing;
I was told that it was a known problem, and the fix to it was
in the kernel I was testing. Indeed it was ... but it didn't
fix the bug. With the patch below, I no longer see the bug.

Signed-off by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: NJens Axboe <axboe@suse.de>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

SMTC pseudo-interrupts between TCs are deferred and queued if the target
TC is interrupt-inhibited (IXMT). In the first SMTC prototypes, these
queued IPIs were serviced on return to user mode, or on entry into the
kernel idle loop. The INSTANT_REPLAY option dispatches them as part of
local_irq_restore() processing, which adds runtime overhead (hence the
option to turn it off), but ensures that IPIs are handled promptly even
under heavy I/O interrupt load.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Seems to be some left-over debug code.

Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

this patch fills in the portions for ia64 kexec.
Signed-off-by: NSimon Horman <horms@verge.net.au>
Cc: "Zou, Nanhai" <nanhai.zou@intel.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mohan Kumar suggested making kexec-tools-testing.tar.gz a link to the
latest version.  I have done this and this patch updates the documentation
accordingly.
Signed-off-by: NSimon Horman <horms@verge.net.au>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes a confusion reiserfs has for a long time.

On release file operation reiserfs used to try to pack file data stored in
last incomplete page of some files into metadata blocks.  After packing the
page got cleared with clear_page_dirty.  It did not take into account that
the page may be mmaped into other process's address space.  Recent
replacement for clear_page_dirty cancel_dirty_page found the confusion with
sanity check that page has to be not mapped.

The patch fixes the confusion by making reiserfs avoid tail packing if an
inode was ever mmapped.  reiserfs_mmap and reiserfs_file_release are
serialized with mutex in reiserfs specific inode.  reiserfs_mmap locks the
mutex and sets a bit in reiserfs specific inode flags.
reiserfs_file_release checks the bit having the mutex locked.  If bit is
set - tail packing is avoided.  This eliminates a possibility that mmapped
page gets cancel_page_dirty-ed.
Signed-off-by: NVladimir Saveliev <vs@namesys.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <mason@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently one can specify an arbitrary node mask to mbind that includes
nodes not allowed.  If that is done with an interleave policy then we will
go around all the nodes.  Those outside of the currently allowed cpuset
will be redirected to the border nodes.  Interleave will then create
imbalances at the borders of the cpuset.

This patch restricts the nodes to the currently allowed cpuset.

The RFC for this patch was discussed at
http://marc.theaimsgroup.com/?t=116793842100004&r=1&w=2Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following patch fixes a few problems with the tlclk driver.
* bug in the select_amcb1_transmit_clock
* racy read sys call
* racy open sys call
* use of add_timer where mod_timer would be better
* change to the timer data parameter use
Signed-off-by: NMark Gross <mark.gross@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For large size DIO that needs multiple bio, one full page worth of data was
lost at the boundary of bio's maximum sector or segment limits.  After a
bio is full and got submitted.  The outer while (nbytes) { ...  } loop will
allocate a new bio and just march on to index into next page.  It just
forgets about the page that bio_add_page() rejected when previous bio is
full.  Fix it by put the rejected page back to pvec so we pick it up again
for the next bio.
Signed-off-by: NKen Chen <kenneth.w.chen@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes the SH rtc driver correctly act on the "enabled" flag when
setting an alarm.
Signed-off-by: NJamie Lenehan <lenehan@twibble.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a page is marked as dirty in the guest pte, set_pte_common() can set the
writable bit on newly-instantiated shadow pte.  This optimization avoids
a write fault after the initial read fault.

However, if a write fault instantiates the pte, fix_write_pf() incorrectly
reports the fault as a guest page fault, and the guest oopses on what appears
to be a correctly-mapped page.

Fix is to detect the condition and only report a guest page fault on a user
access to a kernel page.

With the fix, a kvm guest can survive a whole night of running the kernel
hacker's screensaver (make -j9 in a loop).
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The various bit string instructions (bts, btc, etc.) fail to adjust the
address correctly if the bit address is beyond BITS_PER_LONG.

This bug creeped in as the emulator originally relied on cr2 to contain the
memory address; however we now decode it from the mod r/m bits, and must
adjust the offset to account for large bit indices.

The patch is rather large because it switches src and dst decoding around, so
that the bit index is available when decoding the memory address.

This fixes workloads like the FC5 installer.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kvm mmio read path looks like:

 1. guest read faults
 2. kvm emulates read, calls emulator_read_emulated()
 3. fails as a read requires userspace help
 4. exit to userspace
 5. userspace emulates read, kvm sets vcpu->mmio_read_completed
 6. re-enter guest, fault again
 7. kvm emulates read, calls emulator_read_emulated()
 8. succeeds as vcpu->mmio_read_emulated is set
 9. instruction completes and guest is resumed

A problem surfaces if the userspace exit (step 5) also requests an interrupt
injection.  In that case, the guest does not re-execute the original
instruction, but the interrupt handler.  The next time an mmio read is
exectued (likely for a different address), step 3 will find
vcpu->mmio_read_completed set and return the value read for the original
instruction.

The problem manifested itself in a few annoying ways:
- little squares appear randomly on console when switching virtual terminals
- ne2000 fails under nfs read load
- rtl8139 complains about "pci errors" even though the device model is
  incapable of issuing them.

Fix by skipping interrupt injection if an mmio read is pending.

A better fix is to avoid re-entry into the guest, and re-emulating immediately
instead.  However that's a bit more complex.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This makes the vmwrite errors on vm shutdown go away.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The paravirt subsystem is still in flux so all exports from it are
definitely internal use only.  The APIs around this /will/ change.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sing the praises of `gcc -W'.  Would have prevented that blockdev direct-IO
bug.

Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

size_t is unsigned.  IO errors aren't getting through.

Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit f2802e7f and its x86 version
(b7471c6d) adds nmi_known_cpu() check
while parsing boot options in x86_64 and i386.

With that, "nmi_watchdog=2" stops working for me on Intel Core 2 CPU
based system.

The problem is, setup_nmi_watchdog is called while parsing the boot
option and identify_cpu is not done yet.  So, the return value of
nmi_known_cpu() is not valid at this point.

So revert that check.  This should not have any adverse effect as the
nmi_known_cpu() check is done again later in enable_lapic_nmi_watchdog().
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>