- 23 1月, 2016 16 次提交
-
-
由 Ming Lei 提交于
After commit e36f6204(block: split bios to maxpossible length), bio can be splitted in the middle of a vector entry, then it is easy to split out one bio which size isn't aligned with block size, especially when the block size is bigger than 512. This patch fixes the issue by making the max io size aligned to logical block size. Fixes: e36f6204(block: split bios to maxpossible length) Reported-by: NStefan Haberland <sth@linux.vnet.ibm.com> Cc: Keith Busch <keith.busch@intel.com> Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NMing Lei <tom.leiming@gmail.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux由 Linus Torvalds 提交于
Pull ia64 copy_file_range syscall update from Tony Luck: "Another release, another new syscall to wire up" * tag 'please-pull-copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Enable copy_file_range syscall for ia64
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC support for Tegra platforms from Olof Johansson: "Here's a single-SoC topic branch that we've staged separately. Mainly because it was hard to sort the branch contents in a way that fit our existing branches due to some refactorings. The code has been in -next for quite a while, but we staged it in arm-soc a bit late, which is why we've kept it separate from the other updates and are sending it separately here" * tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support arm64: tegra: Add NVIDIA P2597 I/O board support arm64: tegra: Add NVIDIA Jetson TX1 support arm64: tegra: Add NVIDIA P2571 board support arm64: tegra: Add NVIDIA P2371 board support arm64: tegra: Add NVIDIA P2595 I/O board support arm64: tegra: Add NVIDIA P2530 main board support arm64: tegra: Add Tegra210 support arm64: tegra: Add NVIDIA Tegra132 Norrin support arm64: tegra: Add Tegra132 support ARM: tegra: select USB_ULPI from EHCI rather than platform ARM: tegra: Ensure entire dcache is flushed on entering LP0/1 amba: Hide TEGRA_AHB symbol soc/tegra: Add Tegra210 support soc/tegra: Provide per-SoC Kconfig symbols
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "A few fixes for fallout that we didn't catch in time in -next, or smaller warning fixes that have been discovered since" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: soc: qcom/spm: shut up uninitialized variable warning ARM: realview: fix device tree build ARM: debug-ll: fix BCM63xx entry for multiplatform ARM: dts: armadillo800eva Correct extal1 frequency to 24 MHz
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull more input updates from Dmitry Torokhov: "The second round of updates for the input subsystem, mainly changes to xpad driver to better hanlde Xbox One controllers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio-keys - allow disabling individual buttons in DT Input: gpio-keys - allow setting input device name in DT Input: xpad - correct xbox one pad device name Input: atmel_mxt_ts - improve touchscreen size/orientation handling Input: xpad - use LED API when identifying wireless controllers Input: xpad - workaround dead irq_out after suspend/ resume Input: xpad - update Xbox One Force Feedback Support Input: xpad - correctly handle concurrent LED and FF requests Input: xpad - handle "present" and "gone" correctly Input: xpad - remove spurious events of wireless xpad 360 controller
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull more SCSI updates from James Bottomley: "This is mostly stuff which missed the first pull request because it needed to incubate longer. It's mainly made up of the ncr 5380 rework but also has a few assorted bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (88 commits) imm: Use new parport device model megaraid: Fix possible NULL pointer deference in mraid_mm_ioctl storvsc: Fix typo in MODULE_PARM_DESC cxgbi: Typo in MODULE_PARM_DESC 3w-xxxx: Pass through compat mode ioctls hisi_sas: Use u64 for qw0 in free_device_v1_hw() hisi_sas: Fix typo in setup_itct_v1_hw() hisi_sas: Fix v1 itct masks ipr: Fix out-of-bounds null overwrite scsi: add Synology to 1024 sector blacklist ncr5380: Add support for HP C2502 ncr5380: Fix wait for 53C80 registers registers after PDMA ncr5380: Enable PDMA for DTC chips ncr5380: Enable PDMA for NCR53C400A ncr5380: Use runtime register mapping ncr5380: Fix pseudo DMA transfers on 53C400 ncr5380: Cleanup whitespace and parentheses atari_NCR5380: Merge changes from NCR5380.c ncr5380: Merge changes from atari_NCR5380.c ncr5380: Fix whitespace in comments using regexp ...
-
由 Tony Luck 提交于
New system call added in: 29732938 vfs: add copy_file_range syscall and vfs helper Signed-off-by: NTony Luck <tony.luck@intel.com>
-
git://git.linaro.org/people/ulf.hansson/mmc由 Linus Torvalds 提交于
Pull MMC fixes from Ulf Hansson: "Here are some mmc fixes intended for v4.5 rc1. MMC core: - Restore reset-gpios to be optional in pwrseq_simple - Allow SDIO tuple for CISTPL_SDIO_STD - Print correct voltage value in debugfs - Enable tuning according to the actual timing - Limit SD card power limit according to cards capabilities MMC host: - tmio_mmc_dma: don't print invalid DMA cookie - mmci: Pick the correct variant and allow 8-bit mode for Nomadik" * tag 'mmc-v4.5-rc1' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: pwrseq_simple: Make reset-gpios optional to match doc mmc: sdio_cis: fix unknown tuple for CISTPL_SDIO_STD mmc: debugfs: correct wrong voltage value mmc: tmio_mmc_dma: don't print invalid DMA cookie mmc: core: Enable tuning according to the actual timing mmc: mmci: support 8bit mode on the Nomadik mmc: mmci: fix an ages old detection error mmc: sd: limit SD card power limit according to cards capabilities
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: "This fixes the following issues: API: - A large number of bug fixes for the af_alg interface, credit goes to Dmitry Vyukov for discovering and reporting these issues. Algorithms: - sw842 needs to select crc32. - The soft dependency on crc32c is now in the correct spot. Drivers: - The atmel AES driver needs HAS_DMA. - The atmel AES driver was a missing break statement, fortunately it's only a debug function. - A number of bug fixes for the Intel qat driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (24 commits) crypto: algif_skcipher - sendmsg SG marking is off by one crypto: crc32c - Fix crc32c soft dependency crypto: algif_skcipher - Load TX SG list after waiting crypto: atmel-aes - Add missing break to atmel_aes_reg_name crypto: algif_skcipher - Fix race condition in skcipher_check_key crypto: algif_hash - Fix race condition in hash_check_key crypto: CRYPTO_DEV_ATMEL_AES should depend on HAS_DMA lib: sw842: select crc32 crypto: af_alg - Forbid bind(2) when nokey child sockets are present crypto: algif_skcipher - Remove custom release parent function crypto: algif_hash - Remove custom release parent function crypto: af_alg - Allow af_af_alg_release_parent to be called on nokey path crypto: qat - update init_esram for C3xxx dev type crypto: qat - fix timeout issues crypto: qat - remove to call get_sram_bar_id for qat_c3xxx crypto: algif_skcipher - Add key check exception for cipher_null crypto: skcipher - Add crypto_skcipher_has_setkey crypto: algif_hash - Require setkey before accept(2) crypto: hash - Add crypto_ahash_has_setkey crypto: algif_skcipher - Add nokey compatibility path ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Here are lots of small fixes that have been collected since the previous pull. This time, not only trivial ones but fixes for some serious bugs are included: - Fix for CPU lockups by snd-hrtimer accesses - Fix for unsafe disconnection handling in ALSA timer code - Fix for Oops due to race at HD-audio module removal - Fixes for possible memory corruption via 32bit PCM and sequencer compat ioctls - Fix for regression in HD-audio generic model handling - Suppress kernel warnings for invalid TLV ioctls that may flood up - Fix the missing SSC clock handling for at73c213 - A pin fixup for ASUS N550JX" * tag 'sound-fix-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: timer: Introduce disconnect op to snd_timer_instance ALSA: timer: Handle disconnection more safely ALSA: hda - Flush the pending probe work at remove ALSA: hda - Fix missing module loading with model=generic option ALSA: hda - Degrade i915 binding failure message ALSA: at73c213: manage SSC clock ALSA: control: Avoid kernel warnings from tlv ioctl with numid 0 ALSA: seq: Fix snd_seq_call_port_info_ioctl in compat mode ALSA: pcm: Fix snd_pcm_hw_params struct copy in compat mode ALSA: hrtimer: Fix stall by hrtimer_cancel() ALSA: hda - Fix bass pin fixup for ASUS N550JX
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull more btrfs updates from Chris Mason: "These are mostly fixes that we've been testing, but also we grabbed and tested a few small cleanups that had been on the list for a while. Zhao Lei's patchset also fixes some early ENOSPC buglets" * 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (21 commits) btrfs: raid56: Use raid_write_end_io for scrub btrfs: Remove unnecessary ClearPageUptodate for raid56 btrfs: use rbio->nr_pages to reduce calculation btrfs: Use unified stripe_page's index calculation btrfs: Fix calculation of rbio->dbitmap's size calculation btrfs: Fix no_space in write and rm loop btrfs: merge functions for wait snapshot creation btrfs: delete unused argument in btrfs_copy_from_user btrfs: Use direct way to determine raid56 write/recover mode btrfs: Small cleanup for get index_srcdev loop btrfs: Enhance chunk validation check btrfs: Enhance super validation check Btrfs: fix deadlock running delayed iputs at transaction commit time Btrfs: fix typo in log message when starting a balance btrfs: remove duplicate const specifier btrfs: initialize the seq counter in struct btrfs_device Btrfs: clean up an error code in btrfs_init_space_info() btrfs: fix iterator with update error in backref.c Btrfs: fix output of compression message in btrfs_parse_options() Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 updates from Ted Ts'o: "Some locking and page fault bug fixes from Jan Kara, some ext4 encryption fixes from me, and Li Xi's Project Quota commits" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: fs: clean up the flags definition in uapi/linux/fs.h ext4: add FS_IOC_FSSETXATTR/FS_IOC_FSGETXATTR interface support ext4: add project quota support ext4: adds project ID support ext4 crypto: simplify interfaces to directory entry insert functions ext4 crypto: add missing locking for keyring_key access ext4: use pre-zeroed blocks for DAX page faults ext4: implement allocation of pre-zeroed blocks ext4: provide ext4_issue_zeroout() ext4: get rid of EXT4_GET_BLOCKS_NO_LOCK flag ext4: document lock ordering ext4: fix races of writeback with punch hole and zero range ext4: fix races between buffered IO and collapse / insert range ext4: move unlocked dio protection from ext4_alloc_file_blocks() ext4: fix races between page faults and hole punching
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs由 Linus Torvalds 提交于
Pull more xfs updates from Dave Chinner: "This is the second update for XFS that I mentioned in the original pull request last week. It contains a revert for a suspend regression in 4.4 and a fix for a long standing log recovery issue that has been further exposed by all the log recovery changes made in the original 4.5 merge. There is one more thing in this pull request - one that I forgot to merge into the origin. That is, pulling the XFS_IOC_FS[GS]ETXATTR ioctl up to the VFS level so that other filesystems can also use it for modifying project quota IDs Summary: - promotion of XFS_IOC_FS[GS]ETXATTR ioctl to the vfs level so that it can be shared with other filesystems. The ext4 project quota functionality is the first target for this. The commits in this series have not been updated with review or final SOB tags because the branch they were originally published in was needed by ext4. Those tags are: Reviewed-by: NTheodore Ts'o <tytso@mit.edu> Signed-off-by: NDave Chinner <david@fromrobit.com> - Revert a change that is causing suspend failures. - Fix a use-after-free that can occur on log mount failures. Been around forever, but now exposed by other changes to log recovery made in the first 4.5 merge" * tag 'xfs-for-linus-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: log mount failures don't wait for buffers to be released Revert "xfs: clear PF_NOFREEZE for xfsaild kthread" xfs: introduce per-inode DAX enablement xfs: use FS_XFLAG definitions directly fs: XFS_IOC_FS[SG]SETXATTR to FS_IOC_FS[SG]ETXATTR promotion
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull more vfs updates from Al Viro: "Embarrassing braino fix + pipe page accounting + fixing an eyesore in find_filesystem() (checking that s1 is equal to prefix of s2 of given length can be done in many ways, but "compare strlen(s1) with length and then do strncmp()" is not a good one...)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [regression] fix braino in fs/dlm/user.c pipe: limit the per-user amount of pages allocated in pipes find_filesystem(): simplify comparison
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "Six fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: ocfs2: NFS hangs in __ocfs2_cluster_lock due to race with ocfs2_unblock_lock reiserfs: fix dereference of ERR_PTR ratelimit: fix bug in time interval by resetting right begin time mm: fix kernel crash in khugepaged thread mm: fix mlock accouting thp: change pmd_trans_huge_lock() interface to return ptl
-
由 Olof Johansson 提交于
Merge tag 'renesas-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes for v4.5 Correct extal1 frequency of armadillo800eva board * tag 'renesas-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: armadillo800eva Correct extal1 frequency to 24 MHz Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 22 1月, 2016 22 次提交
-
-
由 Arnd Bergmann 提交于
gcc warns about the 'found' variable possibly being used uninitialized: drivers/soc/qcom/spm.c: In function 'spm_dev_probe': drivers/soc/qcom/spm.c:305:5: error: 'found' may be used uninitialized in this function [-Werror=maybe-uninitialized] However, the code is correct because we know that there is always at least one online CPU. This initializes the 'found' variable to zero before the loop so the compiler knows it does not have to warn about it. Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull NVMe updates from Jens Axboe: "Last branch for this series is the nvme changes. It's in a separate branch to avoid splitting too much between core and NVMe changes, since NVMe is still helping drive some blk-mq changes. That said, not a huge amount of core changes in here. The grunt of the work is the continued split of the code" * 'for-4.5/nvme' of git://git.kernel.dk/linux-block: (67 commits) uapi: update install list after nvme.h rename NVMe: Export NVMe attributes to sysfs group NVMe: Shutdown controller only for power-off NVMe: IO queue deletion re-write NVMe: Remove queue freezing on resets NVMe: Use a retryable error code on reset NVMe: Fix admin queue ring wrap nvme: make SG_IO support optional nvme: fixes for NVME_IOCTL_IO_CMD on the char device nvme: synchronize access to ctrl->namespaces nvme: Move nvme_freeze/unfreeze_queues to nvme core PCI/AER: include header file NVMe: Export namespace attributes to sysfs NVMe: Add pci error handlers block: remove REQ_NO_TIMEOUT flag nvme: merge iod and cmd_info nvme: meta_sg doesn't have to be an array nvme: properly free resources for cancelled command nvme: simplify completion handling nvme: special case AEN requests ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull lightnvm fixes and updates from Jens Axboe: "This should have been part of the drivers branch, but it arrived a bit late and wasn't based on the official core block driver branch. So they got a small scolding, but got a pass since it's still new. Hence it's in a separate branch. This is mostly pure fixes, contained to lightnvm/, and minor feature additions" * 'for-4.5/lightnvm' of git://git.kernel.dk/linux-block: (26 commits) lightnvm: ensure that nvm_dev_ops can be used without CONFIG_NVM lightnvm: introduce factory reset lightnvm: use system block for mm initialization lightnvm: introduce ioctl to initialize device lightnvm: core on-disk initialization lightnvm: introduce mlc lower page table mappings lightnvm: add mccap support lightnvm: manage open and closed blocks separately lightnvm: fix missing grown bad block type lightnvm: reference rrpc lun in rrpc block lightnvm: introduce nvm_submit_ppa lightnvm: move rq->error to nvm_rq->error lightnvm: support multiple ppas in nvm_erase_ppa lightnvm: move the pages per block check out of the loop lightnvm: sectors first in ppa list lightnvm: fix locking and mempool in rrpc_lun_gc lightnvm: put block back to gc list on its reclaim fail lightnvm: check bi_error in gc lightnvm: return the get_bb_tbl return value lightnvm: refactor end_io functions for sync ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block driver updates from Jens Axboe: "This is the block driver pull request for 4.5, with the exception of NVMe, which is in a separate branch and will be posted after this one. This pull request contains: - A set of bcache stability fixes, which have been acked by Kent. These have been used and tested for more than a year by the community, so it's about time that they got in. - A set of drbd updates from the drbd team (Andreas, Lars, Philipp) and Markus Elfring, Oleg Drokin. - A set of fixes for xen blkback/front from the usual suspects, (Bob, Konrad) as well as community based fixes from Kiri, Julien, and Peng. - A 2038 time fix for sx8 from Shraddha, with a fix from me. - A small mtip32xx cleanup from Zhu Yanjun. - A null_blk division fix from Arnd" * 'for-4.5/drivers' of git://git.kernel.dk/linux-block: (71 commits) null_blk: use sector_div instead of do_div mtip32xx: restrict variables visible in current code module xen/blkfront: Fix crash if backend doesn't follow the right states. xen/blkback: Fix two memory leaks. xen/blkback: make st_ statistics per ring xen/blkfront: Handle non-indirect grant with 64KB pages xen-blkfront: Introduce blkif_ring_get_request xen-blkback: clear PF_NOFREEZE for xen_blkif_schedule() xen/blkback: Free resources if connect_ring failed. xen/blocks: Return -EXX instead of -1 xen/blkback: make pool of persistent grants and free pages per-queue xen/blkback: get the number of hardware queues/rings from blkfront xen/blkback: pseudo support for multi hardware queues/rings xen/blkback: separate ring information out of struct xen_blkif xen/blkfront: correct setting for xen_blkif_max_ring_order xen/blkfront: make persistent grants pool per-queue xen/blkfront: Remove duplicate setting of ->xbdev. xen/blkfront: Cleanup of comments, fix unaligned variables, and syntax errors. xen/blkfront: negotiate number of queues/rings to be used with backend xen/blkfront: split per device io_lock ...
-
由 Dmitry Torokhov 提交于
Prepare second round of input updates for 4.5 merge window.
-
由 Tariq Saeed 提交于
NFS on a 2 node ocfs2 cluster each node exporting dir. The lock causing the hang is the global bit map inode lock. Node 1 is master, has the lock granted in PR mode; Node 2 is in the converting list (PR -> EX). There are no holders of the lock on the master node so it should downconvert to NL and grant EX to node 2 but that does not happen. BLOCKED + QUEUED in lock res are set and it is on osb blocked list. Threads are waiting in __ocfs2_cluster_lock on BLOCKED. One thread wants EX, rest want PR. So it is as though the downconvert thread needs to be kicked to complete the conv. The hang is caused by an EX req coming into __ocfs2_cluster_lock on the heels of a PR req after it sets BUSY (drops l_lock, releasing EX thread), forcing the incoming EX to wait on BUSY without doing anything. PR has called ocfs2_dlm_lock, which sets the node 1 lock from NL -> PR, queues ast. At this time, upconvert (PR ->EX) arrives from node 2, finds conflict with node 1 lock in PR, so the lock res is put on dlm thread's dirty listt. After ret from ocf2_dlm_lock, PR thread now waits behind EX on BUSY till awoken by ast. Now it is dlm_thread that serially runs dlm_shuffle_lists, ast, bast, in that order. dlm_shuffle_lists ques a bast on behalf of node 2 (which will be run by dlm_thread right after the ast). ast does its part, sets UPCONVERT_FINISHING, clears BUSY and wakes its waiters. Next, dlm_thread runs bast. It sets BLOCKED and kicks dc thread. dc thread runs ocfs2_unblock_lock, but since UPCONVERT_FINISHING set, skips doing anything and reques. Inside of __ocfs2_cluster_lock, since EX has been waiting on BUSY ahead of PR, it wakes up first, finds BLOCKED set and skips doing anything but clearing UPCONVERT_FINISHING (which was actually "meant" for the PR thread), and this time waits on BLOCKED. Next, the PR thread comes out of wait but since UPCONVERT_FINISHING is not set, it skips updating the l_ro_holders and goes straight to wait on BLOCKED. So there, we have a hang! Threads in __ocfs2_cluster_lock wait on BLOCKED, lock res in osb blocked list. Only when dc thread is awoken, it will run ocfs2_unblock_lock and things will unhang. One way to fix this is to wake the dc thread on the flag after clearing UPCONVERT_FINISHING Orabug: 20933419 Signed-off-by: NTariq Saeed <tariq.x.saeed@oracle.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by: NWengang Wang <wen.gang.wang@oracle.com> Reviewed-by: NMark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: NJoseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sudip Mukherjee 提交于
reiserfs_iget() returns either NULL or error code in ERR_PTR. And we were only checking for NULL, so in case of some other error we will try to dereference the ERR_PTR(-errno) thinking it to be a valid pointer. Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jaewon Kim 提交于
rs->begin in ratelimit is set in two cases. 1) when rs->begin was not initialized 2) when rs->interval was passed For case #2, current ratelimit sets the begin to 0. This incurrs improper suppression. The begin value will be set in the next ratelimit call by 1). Then the time interval check will be always false, and rs->printed will not be initialized. Although enough time passed, ratelimit may return 0 if rs->printed is not less than rs->burst. To reset interval properly, begin should be jiffies rather than 0. For an example code below: static DEFINE_RATELIMIT_STATE(mylimit, 1, 1); for (i = 1; i <= 10; i++) { if (__ratelimit(&mylimit)) printk("ratelimit test count %d\n", i); msleep(3000); } test result in the current code shows suppression even there is 3 seconds sleep. [ 78.391148] ratelimit test count 1 [ 81.295988] ratelimit test count 2 [ 87.315981] ratelimit test count 4 [ 93.336267] ratelimit test count 6 [ 99.356031] ratelimit test count 8 [ 105.376367] ratelimit test count 10 Signed-off-by: NJaewon Kim <jaewon31.kim@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 yalin wang 提交于
This crash is caused by NULL pointer deference, in page_to_pfn() marco, when page == NULL : Unable to handle kernel NULL pointer dereference at virtual address 00000000 Internal error: Oops: 94000006 [#1] SMP Modules linked in: CPU: 1 PID: 26 Comm: khugepaged Tainted: G W 4.3.0-rc6-next-20151022ajb-00001-g32f3386-dirty #3 PC is at khugepaged+0x378/0x1af8 LR is at khugepaged+0x418/0x1af8 Process khugepaged (pid: 26, stack limit = 0xffffffc079638020) Call trace: khugepaged+0x378/0x1af8 kthread+0xdc/0xf4 ret_from_fork+0xc/0x40 Code: 35001700 f0002c60 aa0703e3 f9009fa0 (f94000e0) ---[ end trace 637503d8e28ae69e ]--- Kernel panic - not syncing: Fatal exception CPU2: stopping CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D W 4.3.0-rc6-next-20151022ajb-00001-g32f3386-dirty #3 Hardware name: linux,dummy-virt (DT) [akpm@linux-foundation.org: fix fat-fingered merge resolution] Signed-off-by: Nyalin wang <yalin.wang2010@gmail.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
Tetsuo Handa reported underflow of NR_MLOCK on munlock. Testcase: #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #define BASE ((void *)0x400000000000) #define SIZE (1UL << 21) int main(int argc, char *argv[]) { void *addr; system("grep Mlocked /proc/meminfo"); addr = mmap(BASE, SIZE, PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE | MAP_LOCKED | MAP_FIXED, -1, 0); if (addr == MAP_FAILED) printf("mmap() failed\n"), exit(1); munmap(addr, SIZE); system("grep Mlocked /proc/meminfo"); return 0; } It happens on munlock_vma_page() due to unfortunate choice of nr_pages data type: __mod_zone_page_state(zone, NR_MLOCK, -nr_pages); For unsigned int nr_pages, implicitly casted to long in __mod_zone_page_state(), it becomes something around UINT_MAX. munlock_vma_page() usually called for THP as small pages go though pagevec. Let's make nr_pages signed int. Similar fixes in 6cdb18ad ("mm/vmstat: fix overflow in mod_zone_page_state()") used `long' type, but `int' here is OK for a count of the number of sub-pages in a huge page. Fixes: ff6a6da6 ("mm: accelerate munlock() treatment of THP pages") Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Michel Lespinasse <walken@google.com> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> [4.4+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
After THP refcounting rework we have only two possible return values from pmd_trans_huge_lock(): success and failure. Return-by-pointer for ptl doesn't make much sense in this case. Let's convert pmd_trans_huge_lock() to return ptl on success and NULL on failure. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Minchan Kim <minchan@kernel.org> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
it's "bugger off if we got ERR_PTR", not the other way round... Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Linus Torvalds 提交于
Expose an interface to allow users to mark several accesses together as being user space accesses, allowing batching of the surrounding user space access markers (SMAP on x86, PAN on arm64, domain register switching on arm). This is currently only used for the user string lenth and copying functions, where the SMAP overhead on x86 drowned the actual user accesses (only noticeable on newer microarchitectures that support SMAP in the first place, of course). * user access batching branch: Use the new batched user accesses in generic user string handling Add 'unsafe' user access functions for batched accesses x86: reorganize SMAP handling in user space accesses
-
由 Linus Torvalds 提交于
Merge third patch-bomb from Andrew Morton: "I'm pretty much done for -rc1 now: - the rest of MM, basically - lib/ updates - checkpatch, epoll, hfs, fatfs, ptrace, coredump, exit - cpu_mask simplifications - kexec, rapidio, MAINTAINERS etc, etc. - more dma-mapping cleanups/simplifications from hch" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits) MAINTAINERS: add/fix git URLs for various subsystems mm: memcontrol: add "sock" to cgroup2 memory.stat mm: memcontrol: basic memory statistics in cgroup2 memory controller mm: memcontrol: do not uncharge old page in page cache replacement Documentation: cgroup: add memory.swap.{current,max} description mm: free swap cache aggressively if memcg swap is full mm: vmscan: do not scan anon pages if memcg swap limit is hit swap.h: move memcg related stuff to the end of the file mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online mm: vmscan: pass memcg to get_scan_count() mm: memcontrol: charge swap to cgroup2 mm: memcontrol: clean up alloc, online, offline, free functions mm: memcontrol: flatten struct cg_proto mm: memcontrol: rein in the CONFIG space madness net: drop tcp_memcontrol.c mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM mm: memcontrol: allow to disable kmem accounting for cgroup2 mm: memcontrol: account "kmem" consumers in cgroup2 memory controller mm: memcontrol: move kmem accounting code to CONFIG_MEMCG mm: memcontrol: separate kmem code from legacy tcp accounting code ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs由 Linus Torvalds 提交于
Pull overlayfs updates from Miklos Szeredi: "This contains several bug fixes and a new mount option 'default_permissions' that allows read-only exported NFS filesystems to be used as lower layer" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: check dentry positiveness in ovl_cleanup_whiteouts() ovl: setattr: check permissions before copy-up ovl: root: copy attr ovl: move super block magic number to magic.h ovl: use a minimal buffer in ovl_copy_xattr ovl: allow zero size xattr ovl: default permissions
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
Pull fuse updates from Miklos Szeredi: "This adds SEEK_HOLE and SEEK_DATA support in lseek" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: add support for SEEK_HOLE and SEEK_DATA in lseek
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.5 merge window: Enumeration: - Simplify config space size computation (Bjorn Helgaas) - Avoid iterating through ROM outside the resource window (Edward O'Callaghan) - Support PCIe devices with short cfg_size (Jason S. McMullan) - Add Netronome vendor and device IDs (Jason S. McMullan) - Limit config space size for Netronome NFP6000 family (Jason S. McMullan) - Add Netronome NFP4000 PF device ID (Simon Horman) - Limit config space size for Netronome NFP4000 (Simon Horman) - Print warnings for all invalid expansion ROM headers (Vladis Dronov) Resource management: - Fix minimum allocation address overwrite (Christoph Biedl) PCI device hotplug: - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King) - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck) - shpchp: Constify hpc_ops structure (Julia Lawall) - ibmphp: Remove unneeded NULL test (Julia Lawall) Power management: - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski) Virtualization - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander) MSI: - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas) - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko) - Initialize MSI capability for all architectures (Guilherme G. Piccoli) - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang) ARM Versatile host bridge driver: - Remove unused pci_sys_data structures (Lorenzo Pieralisi) Broadcom iProc host bridge driver: - Hide CONFIG_PCIE_IPROC (Arnd Bergmann) - Do not use 0x in front of %pap (Dmitry V. Krivenok) - Update iProc PCIe device tree binding (Ray Jui) - Add PAXC interface support (Ray Jui) - Add iProc PCIe MSI device tree binding (Ray Jui) - Add iProc PCIe MSI support (Ray Jui) Freescale i.MX6 host bridge driver: - Use gpio_set_value_cansleep() (Fabio Estevam) - Add support for active-low reset GPIO (Petr Štetiar) HiSilicon host bridge driver: - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni) Intel VMD host bridge driver: - Export irq_domain_set_info() for module use (Keith Busch) - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch) - Use 32 bit PCI domain numbers (Keith Busch) - Add driver for Intel Volume Management Device (VMD) (Keith Busch) Qualcomm host bridge driver: - Document PCIe devicetree bindings (Stanimir Varbanov) - Add Qualcomm PCIe controller driver (Stanimir Varbanov) - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov) - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov) Renesas R-Car host bridge driver: - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa) - Allow DT to override default window settings (Phil Edworthy) - Convert to DT resource parsing API (Phil Edworthy) - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy) - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy) - Add runtime PM support to pcie-rcar (Phil Edworthy) - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy) - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman) - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman) Synopsys DesignWare host bridge driver: - Simplify control flow (Bjorn Helgaas) - Make config accessor override checking symmetric (Bjorn Helgaas) - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov) Miscellaneous: - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann) - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas) - Fix all whitespace issues (Bogicevic Sasa) - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang) - Use to_pci_dev() instead of open-coding it (Geliang Tang) - Use kobj_to_dev() instead of open-coding it (Geliang Tang) - Use list_for_each_entry() to simplify code (Geliang Tang) - Fix typos in <linux/msi.h> (Thomas Petazzoni) - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)" * tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 PCI: Limit config space size for Netronome NFP4000 PCI: Add Netronome NFP4000 PF device ID x86/PCI: Add driver for Intel Volume Management Device (VMD) PCI/AER: Use 32 bit PCI domain numbers x86/PCI: Allow DMA ops specific to a PCI domain irqdomain: Export irq_domain_set_info() for module use PCI: host: Add of_pci_get_host_bridge_resources() stub genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: designware: Make config accessor override checking symmetric PCI: ibmphp: Remove unneeded NULL test ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: hotplug: Use list_for_each_entry() to simplify code PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers PCI: Avoid iterating through memory outside the resource window PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot ...
-
由 Linus Torvalds 提交于
Merge tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This set of changes contains a new driver for OMAP (using the dual-mode timers) as well as an assortment of fixes all across the board" * tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Mark all devices as "might sleep" pwm: omap-dmtimer: Potential NULL dereference on error pwm: add HAS_IOMEM dependency to PWM_FSL_FTM pwm: Add PWM driver for OMAP using dual-mode timers pwm: rcar: Improve accuracy of frequency division setting pwm: lpc32xx: return ERANGE, if requested period is not supported pwm: lpc32xx: fix and simplify duty cycle and period calculations pwm: lpc32xx: make device usable with common clock framework pwm: lpc32xx: correct number of PWM channels from 2 to 1 dt: lpc32xx: pwm: update documentation of LPC32xx PWM device dt: lpc32xx: pwm: correct LPC32xx PWM device node example pwm: fsl-ftm: Fix clock enable/disable when using PM pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE pwm: lpss: Select core part automatically pwm: lpss: Update PWM setting for Broxton pwm: bcm2835: Fix email address specification pwm: bcm2835: Prevent division by zero pwm: bcm2835: Calculate scaler in ->config() pwm: lpss: Remove ->free() callback
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris由 Linus Torvalds 提交于
Pull CRIS updates from Jesper Nilsson: "Just some fixups for section mismatches from Guenter" * tag 'cris-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: cris: Fix section mismatches in architecture startup code cris: debugport: Fix section mismatches
-
git://git.osdn.jp/gitroot/uclinux-h8/linux由 Linus Torvalds 提交于
Pull h8300 updates from Yoshinori Sato: - Add KGDB support - zImage fix - various cleanup * tag 'for-4.5' of git://git.osdn.jp/gitroot/uclinux-h8/linux: h8300: System call entry enable interrupt. h8300: show_stack cleanup h8300: Restraint of warning. h8300: Add KGDB support. irqchip: renesas-h8s: Replace ctrl_outw/ctrl_inw with writew/readw h8300: signal stack fix h8300: Add LZO compression h8300: zImage alignment fix clk: h8300: Remove "sh73a0-" part from compatible value h8300: zImage alignment fix
-
由 Takashi Iwai 提交于
Instead of the previous ugly hack, introduce a new op, disconnect, to snd_timer_instance object for handling the wake up of pending tasks more cleanly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109431Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Currently ALSA timer device doesn't take the disconnection into account very well; it merely unlinks the timer device at disconnection callback but does nothing else. Because of this, when an application accessing the timer device is disconnected, it may release the resource before actually closed. In most cases, it results in a warning message indicating a leftover timer instance like: ALSA: timer xxxx is busy? But basically this is an open race. This patch tries to address it. The strategy is like other ALSA devices: namely, - Manage card's refcount at each open/close - Wake up the pending tasks at disconnection - Check the shutdown flag appropriately at each possible call Note that this patch has one ugly hack to handle the wakeup of pending tasks. It'd be cleaner to introduce a new disconnect op to snd_timer_instance ops. But since it would lead to internal ABI breakage and it eventually increase my own work when backporting to stable kernels, I took a different path to implement locally in timer.c. A cleanup patch will follow at next for 4.5 kernel. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109431 Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 1月, 2016 2 次提交
-
-
由 Thierry Reding 提交于
Commit d1cd2142 ("pwm: Set enable state properly on failed call to enable") introduced a mutex that is needed to protect internal state of PWM devices. Since that mutex is acquired in pwm_set_polarity() and in pwm_enable() and might potentially block, all PWM devices effectively become "might sleep". It's rather pointless to keep the .can_sleep field around, but given that there are external users let's postpone the removal for the next release cycle. Signed-off-by: NThierry Reding <thierry.reding@gmail.com>
-
由 Martin Fuzzey 提交于
The DT binding doc says reset-gpios is an optional property but the code currently bails out if it is omitted. This is a regression since it breaks previously working device trees. Fix it by restoring the original documented behaviour. Fixes: ce037275 ("mmc: pwrseq_simple: use GPIO descriptors array API") Tested-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMartin Fuzzey <mfuzzey@parkeon.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-