In PowerNV PCI hotplug driver, the initial PCI slot's state is set
to PNV_PHP_STATE_POPULATED if no PCI devices are connected to the
slot. The PCI devices that are hot added to the slot won't be probed
and populated because of the check in pnv_php_enable():

        /* Check if the slot has been configured */
        if (php_slot->state != PNV_PHP_STATE_REGISTERED)
                return 0;

This fixes the issue by leaving the slot in PNV_PHP_STATE_REGISTERED
state initially if nothing is connected to the slot.

Fixes: 360aebd8 ("drivers/pci/hotplug: Support surprise hotplug in powernv driver")
Cc: stable@vger.kernel.org #v4.9+
Reported-by: NHank Chang <hankmax0000@gmail.com>
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: NWillie Liauw <williel@supermicro.com.tw>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The surprise hotplug is driven by interrupt in PowerNV PCI hotplug
driver. In the interrupt handler, pnv_php_interrupt(), we bail when
pnv_pci_get_presence_state() returns zero wrongly. It causes the
presence change event is always ignored incorrectly.

This fixes the issue by bailing on error (non-zero value) returned
from pnv_pci_get_presence_state().

Fixes: 360aebd8 ("drivers/pci/hotplug: Support surprise hotplug in powernv driver")
Cc: stable@vger.kernel.org #v4.9+
Reported-by: NHank Chang <hankmax0000@gmail.com>
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: NWillie Liauw <williel@supermicro.com.tw>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

After updating ppc-dis.c, ppc-opc.c and ppc.h the following changes were
made to enable compilation and working of xmon:

  1.  Remove all disassembler_info
  2.  Use xmon's printf/print_address to output data and addresses
      respectively.
  3.  All bfd_* types and casts have been removed.
  4.  Optimizations related to opcd_indices have been removed.
  5.  The dialect is set based on cpu features.
  6.  PPC_OPCODE_CLASSIC is no longer supported in the new
      disassembler.
  7.  VLE opcode parsing and printing has been stripped.
  8.  Coding style conventions used for those routines has
      been retained and it does not match our CodingStyle.
  9.  The highest supported dialect is POWER9.
  10. Defined ATTRIBUTE_UNUSED in ppc-dis.c.
  11. Defined _(x) in ppc-dis.c.

Finally, we remove the dependency on BROKEN so that XMON_DISASSEMBLY can
be enabled again.
Signed-off-by: NBalbir Singh <bsingharora@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The following commit-ids from the binutils project were applied on the
xmon branch and relicensed with the permission of the authors under
GPLv2 for the following files:

  ppc-opc.c
  ppc-dis.c
  ppc.h

Working off of binutils commit 65b650b4c746 we have now moved up to
binutils commit a5721ba270dd.

Some commit logs have been taken verbatim, some are summarized for ease
of understanding.

Here is a summary of the commits:

 33e8d5ac613d PPC7450 New.  (powerpc_opcodes): Use it in dcba.
 c3d65c1ced61 New opcodes and mask
 8dbcd839b1bb Instruction Sorting
 91eb7075e370 (powerpc_opcodes): Fix the first two operands of dquaiq.
 548b1dcfcbab ppc-opc.c (powerpc_opcodes): Remove the dcffix and dcffix.
 930bb4cfae30 Support optional L form mtmsr.
 de866fccd87d (powerpc_opcodes): Order and format.
 19a6653ce8c6 ppc e500mc support
 fa452fa6833c (ppc_cpu_t): New typedef.
 c8187e1509b2 (parse_cpu): Handle -m464.
 081ba1b3c08b Define. (PPC_OPERAND_FSL, PPC_OPERAND_FCR, PPC_OPERAND_UDI)
 9b4e57660d38 Rename altivec_or_spe to retain_flags. Handle -mvsx and -mpower7.
 899d85beadd0 (powerpc_opcodes): Enable rfci, mfpmr, mtpmr for e300.
 e1c93c699b7d (extract_sprg): Correct operand range check.
 2f3bb96af796 (powerpc_init_dialect): Do not set PPC_OPCODE_BOOKE
 1cb0a7674666 (ppc_setup_opcodes): Remove PPC_OPCODE_NOPOWER4 test
 21169fcfadfa (print_insn_powerpc): Skip insn if it is deprecated
 80890a619b85 ("dcbt", "dcbtst")
 0e55be1624c2 ("lfdepx", "stfdepx")
 066be9f7bd8e (parse_cpu): Extend -mpower7 to accept power7 and isel instructions.
 c72ab5f2c55d (powerpc_opcodes): Reorder the opcode table so that instructions
 69fe9ce501f5 (ppc_parse_cpu): New function. 	(powerpc_init_dialect)
 e401b04ca7cd (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and E500MC entries.
 70dc4e324b9a (powerpc_init_dialect): Do not choose a default dialect due to -many/-Many.
 858d7a6db20b (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva", "tlbilx"
 bdc7fcfe59f1 (powerpc_macros <extrdi>): Allow n+b of 64
 e0d602ecffb0 (md_show_usage): Document -mpcca2
 b961e85b6ebe (ppc_cpu_t): Typedef to uint64_t
 8765b5569284 (powerpc_opcodes): Remove support for the the "lxsdux", "lxvd2ux"
 634b50f2a623 Rename "ppca2" to "a2"
 9fe54b1ca1c0 (md_show_usage): Document -m476
 0dc9305793c8 Add bfd_mach_ppc_e500mc64
 ce3d2015b21b Define. bfd/ 	* archures.c (bfd_mach_ppc_titan)
 cdc51b0748c4 Add -mpwr4, -mpwr5, -mpwr5x, -mpwr6 and -mpwr7
 63d0fa4e9e57 Add PPC_OPCODE_E500MC for "e500mc64"
 cee62821d472 New Define. ("dccci"): Enable for PPCA2
 85d4ac0b3c0b Correct wclr encoding.
 51b5d4a8c5e5 (powerpc_opcodes): Enable divdeu, devweu, divde, divwe, divdeuo
 e01d869a3be2 (md_assemble): Emit APUinfo section for PPC_OPCODE_E500
 09a8ad8d8f56 (powerpc_opcodes): Revert deprecation of mfocrf, mtcrf and mtocrf on EFS.
 f2bae120dcef (PPC_OPCODE_COMMON): Expand comment.
 81a0b7e2ae09 (PPCPWR2): Add PPC_OPCODE_COMMON. (powerpc_opcodes): Add "subc"
 bdc70b4a03fd (PPC_OPCODE_32, PPC_OPCODE_BOOKE64, PPC_OPCODE_CLASSIC)
 7102e95e4943 (ppc_set_cpu): Cast PPC_OPCODE_xxx to ppc_cpu_t before inverting
 f383de6633cb (powerpc_opcodes) [lswx,lswi,stswx,stswi]: Deprecate on E500 and E500MC
 6b069ee70de3 Remove PPC_OPCODE_PPCPS
 2f7f77101279 (powerpc_opcodes): Enable icswx for POWER7
 989993d80a97 (insert_nbi, insert_rbx, FRAp, FRBp, FRSp, FRTp, NBI, RAX, RBX)
 a08fc94222d1 <drrndq, drrndq., dtstexq, dctqpq, dctqpq., dctfixq, dctfixq.
 8ebac3aae962 (ISA_V2): Define and use for relevant BO field tests
 aea77599d0db Add PPC_OPCODE_ALTIVEC2, PPC_OPCODE_E6500, PPC_OPCODE_TMR
 b240011aba98 (disassemble_init_for_target): Handle ppc init.
 d668828207c2 (powerpc_opcd_indices): Bump array size
 b9c361e0ad33 Add support for PowerPC VLE.
 e1dad58d73dc (has_tls_reloc, has_tls_get_addr_call, has_vle_insns, is_ppc_vle)
 df7b86aa4cb6 Add check that sysdep.h has been included before
 98c76446ea6b (extract_sprg): Use ALLOW8_SPRG to include VLE.
 a4ebc835cbcb (powerpc_macros): Add entries for e_extlwi to e_clrlslwi
 94caa966375d (has_vle_insns, is_ppc_vle): Delete
 c7a8dbf91f37 Change RA to RA0
 d908c8af5a1d Add necessary casts for printing integer values
 03edbe3bfb93 Add/remove PPCVLE for some 32-bit insns
 9f6a6cc022e1 <xnop, yield, mdoio, mdoom>: New extended mnemonics
 588925d06545 <RSQ, RTQ>: Use PPC_OPERAND_GPR
 8baf7b78b5d9 <"lswx">: Use RAX for the second and RBX for the third operand
 e67ed0e885d6 Changed opcode for vabsdub, vabsduh, vabsduw, mviwsplt
 fb048c26f19f (UIMM4, UIMM3, UIMM2, VXVA_MASK, VXVB_MASK, VXVAVB_MASK, VXVDVA_MASK
 382c72e90441 (VXASHB_MASK): New define
 c7a5aa9c64fc (ppc_opts) <altivec>: Use PPC_OPCODE_ALTIVEC2
 ab4437c3224f <vcfpsxws>: Fix opcode spelling
 62082a42b9cd "lfdp" and "stfdp" use DS offset.
 776fc41826bb (ppc_parse_cpu): Update prototype
 943d398f4c52 (insert_sci8, extract_sci8): Rewrite.
 5817ffd1f81c New define (PPC_OPCODE_HTM/POWER8)
 9f0682fe89d9 (extract_vlesi): Properly sign extend
 c0637f3af686 (powerpc_init_dialect): Set default dialect to power8.
 58ae08f29af8 (powerpc_opcodes): Add tdui, twui, tdu, twu, tui, tu
 4f6ffcd38d90 (powerpc_init_dialect): Use ppc_parse_cpu() to set dialect
 4b95cf5c0c75 Update copyright years
 a47622ac1bad Allow both signed and unsigned fields in PowerPC cmpli insn
 12e87fac5c76 ppc: enable msgclr and msgsnd on Power8
 8514e4db84cc Don't deprecate powerpc mftb insn
 db76a70026ab Power4 should treat mftb as extended mfspr mnemonic
 b90efa5b79ac ChangeLog rotatation and copyright year update
 c4e676f19656 powerpc: Add slbfee. instruction
 27c49e9a8fc0 powerpc: Only initialise opcode indices once
 4fff86c517ab DCBT_EO): New define
 4bc0608a8b69 Fix some PPC assembler errors
 dc302c00611b Add hwsync extended mnemonic
 99a2c5612124 Remove unused MTMSRD_L macro and re-add accidentally deleted comment
 11a0cf2ec0ed Allow for optional operands with non-zero default values
 7b9341139a69 PPC sync instruction accepts invalid and incompatible operands
 ef5a96d564a2 Remove ppc860, ppc750cl, ppc7450 insns from common ppc
 43e65147c07b Remove trailing spaces in opcodes
 6dca4fd141fd Add dscr and ctrl SPR mnemonics
 b6518b387185 Fix compile time warnings generated when compiling with clang
 36f7a9411dcd Patches for illegal ppc 500 instructions
 a680de9a980e Add assembler, disassembler and linker support for power9
 dd2887fc3de4 Reorder some power9 insns
 b817670b52b7 Enable 2 operand form of powerpc mfcr with -many
 6f2750feaf28 Copyright update for binutils
 afa8d4054b8e Delete opcodes that have been removed from ISA 3.0
 1178da445ad5 Accept valid one byte signed and unsigned values for the IMM8 operand
 e43de63c8fd1 Fix powerpc subis range
 514e58b72633 Correct "Fix powerpc subis range"
 19dfcc89e8d9 Add support for new POWER ISA 3.0 instructions
 1fe0971e41a4 add more extern C
 026122a67044 Re-add support for lbarx, lharx, stbcx. and sthcx. insns back to the E6500 cpu
 14b57c7c6a53 PowerPC VLE
 6fd3a02da554 Add support for yet some more new ISA 3.0 instructions
 dfdaec14b0db Fix some PowerPC VLE BFD issues and add some PowerPC VLE instructions
 fd486b633e87 Modify POWER9 support to match final ISA 3.0 documentation
 a5721ba270dd Disallow 3-operand cmp[l][i] for ppc64

This updates the disassembly capabilities to add support for newer
processors.
Signed-off-by: NBalbir Singh <bsingharora@gmail.com>
[mpe: Reformat commit list for brevity]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Upgrade ppc-opc.c, ppc-dis.c and ppc.h to the versions belonging to the
following binutils commit:

  65b650b4c7463f4508bed523c24ab0031a5ae5cd
  * ppc-dis.c (print_insn_powerpc): Don't skip all operands after
    setting skip_optional.

That is the last version of those files that were licensed under GPLv2.

This leaves the code in a state that does not compile, because the
binutils code needs to be tweaked to work in the kernel. We don't fix
that in this commit, because we want to import more binutils changes in
subsequent commits. So for now we mark XMON_DISASSEMBLY as BROKEN, so it
can't be built.
Signed-off-by: NBalbir Singh <bsingharora@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We do them at the start of tlb flush, and we are sure a pte update will be
followed by a tlbflush. Hence we can skip the ptesync in pte update helpers.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This helps us to do some optimization for application exit case, where we can
skip the DD1 style pte update sequence.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In the kernel we do follow the below sequence in different code paths.
pte = ptep_get_clear(ptep)
....
set_pte_at(ptep, pte)

We do that for mremap, autonuma protection update and softdirty clearing. This
implies our optimization to skip a tlb flush when clearing a pte update is
not valid, because for DD1 system that followup set_pte_at will be done witout
doing the required tlbflush. Fix that by always doing the dd1 style pte update
irrespective of new_pte value. In a later patch we will optimize the application
exit case.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

With radix, we can get page fault with DSISR_PROTFAULT value set in case of
PROT_NONE or autonuma mapping. The PROT_NONE case in handled by the vma check
where we consider the access bad. For autonuma we should fall through and fixup
the access mask correctly.

Without this patch we trigger the WARN_ON() on radix. This code moves that
WARN_ON() within a radix_enabled() check. I also moved the WARN_ON() outside
the if condition making it apply for all type of faults (exec/write/read). It
is also conditionalized for book3s, because BOOK3E can also get a PROTFAULT to
handle the D/I cache sync.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently xmon data-breakpoint feature is broken.

Whenever there is a watchpoint match occurs, hw_breakpoint_handler will
be called by do_break via notifier chains mechanism. If watchpoint is
registered by xmon, hw_breakpoint_handler won't find any associated
perf_event and returns immediately with NOTIFY_STOP. Similarly, do_break
also returns without notifying to xmon.

Solve this by returning NOTIFY_DONE when hw_breakpoint_handler does not
find any perf_event associated with matched watchpoint, rather than
NOTIFY_STOP, which tells the core code to continue calling the other
breakpoint handlers including the xmon one.

Cc: stable@vger.kernel.org
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The recently merged HPT (Hash Page Table) resize support broke the build
when BOOK3S_64=n (ie. 32-bit or 64-bit Book3E) and MEMORY_HOTPLUG=y:

  arch/powerpc/mm/mem.o: In function `.arch_add_memory':
  (.text+0x4e4): undefined reference to `.resize_hpt_for_hotplug'

Fix it by adding a dummy version.

Fixes: 438cc81a ("powerpc/pseries: Automatically resize HPT for memory hot add/remove")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Merge the topic branch we're sharing with the kvm-ppc tree.

Currently the build breaks if CMA=n and SPAPR_TCE_IOMMU=y:

  arch/powerpc/mm/mmu_context_iommu.c: In function ‘mm_iommu_get’:
  arch/powerpc/mm/mmu_context_iommu.c:193:42: error: ‘MIGRATE_CMA’ undeclared (first use in this function)
  if (get_pageblock_migratetype(page) == MIGRATE_CMA) {
  ^~~~~~~~~~~

Fix it by using the existing is_migrate_cma_page(), which evaulates to
false when CMA=n.

Fixes: 2e5bbb54 ("KVM: PPC: Book3S HV: Migrate pinned pages out of CMA")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

If we enable RADIX but disable HUGETLBFS, the build breaks with:

  arch/powerpc/mm/pgtable-radix.c:557:7: error: implicit declaration of function 'pmd_huge'
  arch/powerpc/mm/pgtable-radix.c:588:7: error: implicit declaration of function 'pud_huge'

Fix it by stubbing those functions when HUGETLBFS=n.

Fixes: 4b5d62ca ("powerpc/mm: add radix__remove_section_mapping()")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Fix typo in "hotplug_delay" parameter description. This allows modinfo
to match the help text to the parameter.
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

... as the generic weak variant will do.
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

kprobe_exceptions_notify() is not used on some of the architectures such
as arm[64] and powerpc anymore. Introduce a weak variant for such
architectures.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The final paragraph of the help text is reversed. We want to enable
this option by default, and disable it if the toolchain has a working
-mprofile-kernel.

Fixes: 8c50b72a ("powerpc/ftrace: Add Kconfig & Make glue for mprofile-kernel")
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently the opal_exit tracepoint usually shows the opcode as 0:

  <idle>-0     [047] d.h.   635.654292: opal_entry: opcode=63
  <idle>-0     [047] d.h.   635.654296: opal_exit: opcode=0 retval=0
  kopald-1209  [019] d...   636.420943: opal_entry: opcode=10
  kopald-1209  [019] d...   636.420959: opal_exit: opcode=0 retval=0

This is because we incorrectly load the opcode into r0 before calling
__trace_opal_exit(), whereas it expects the opcode in r3 (first function
parameter). In fact we are leaving the retval in r3, so opcode and
retval will always show the same value.

Instead load the opcode into r3, resulting in:

  <idle>-0     [040] d.h.   636.618625: opal_entry: opcode=63
  <idle>-0     [040] d.h.   636.618627: opal_exit: opcode=63 retval=0

Fixes: c49f6353 ("powernv: Add OPAL tracepoints")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently we get a warning that _mcount() can't be versioned:

  WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.

Add a prototype to asm-prototypes.h to fix it.

The prototype is not really correct, mcount() is not a normal function,
it has a special ABI. But for the purpose of versioning it doesn't
matter.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The generic implementation of of_node_to_nid() is EXPORT_SYMBOL, added
in commit 298535c0 ("of, numa: Add NUMA of binding
implementation.").

The powerpc implementation added in commit 953039c8 ("[PATCH]
powerpc: Allow devices to register with numa topology") is
EXPORT_SYMBOL_GPL.

This creates an inconsistency for of_node_to_nid() callers across
architectures.

Update the powerpc implementation to be exported consistently with the
generic implementation.
Signed-off-by: NShailendra Singh <shailendras@nvidia.com>
Reviewed-by: NAndy Ritger <aritger@nvidia.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Kprobe placed on the  kretprobe_trampoline() during boot time can be
optimized, since the instruction at probe point is a 'nop'.
Signed-off-by: NAnju T Sudhakar <anju@linux.vnet.ibm.com>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Current infrastructure of kprobe uses the unconditional trap instruction
to probe a running kernel. Optprobe allows kprobe to replace the trap
with a branch instruction to a detour buffer. Detour buffer contains
instructions to create an in memory pt_regs. Detour buffer also has a
call to optimized_callback() which in turn call the pre_handler(). After
the execution of the pre-handler, a call is made for instruction
emulation. The NIP is determined in advanced through dummy instruction
emulation and a branch instruction is created to the NIP at the end of
the trampoline.

To address the limitation of branch instruction in POWER architecture,
detour buffer slot is allocated from a reserved area. For the time
being, 64KB is reserved in memory for this purpose.

Instructions which can be emulated using analyse_instr() are the
candidates for optimization. Before optimization ensure that the address
range between the detour buffer allocated and the instruction being
probed is within +/- 32MB.
Signed-off-by: NAnju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Fix two issues with kprobes.h on BE which were exposed with the
optprobes work:
  - one, having to do with a missing include for linux/module.h for
    MODULE_NAME_LEN -- this didn't show up previously since the only
    users of kprobe_lookup_name were in kprobes.c, which included
    linux/module.h through other headers, and
  - two, with a missing const qualifier for a local variable which ends
    up referring a string literal. Again, this is unique to how
    kprobe_lookup_name is being invoked in optprobes.c
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

To permit the use of relative branch instruction in powerpc, the target
address has to be relatively nearby, since the address is specified in an
immediate field (24 bit filed) in the instruction opcode itself. Here
nearby refers to 32MB on either side of the current instruction.

This patch verifies whether the target address is within +/- 32MB
range or not.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NAnju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Introduce __PPC_SH64() as a 64-bit variant to encode shift field in some
of the shift and rotate instructions operating on double-words. Convert
some of the BPF instruction macros to use the same.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We've now implemented code in the pseries platform to use the new PAPR
interface to allow resizing the hash page table (HPT) at runtime.

This patch uses that interface to automatically attempt to resize the HPT
when memory is hot added or removed.  This tries to always keep the HPT at
a reasonable size for our current memory size.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The hypervisor needs to know a guest is capable of using the HPT resizing
PAPR extension in order to make full advantage of it for memory hotplug.

If the hypervisor knows the guest is HPT resize aware, it can size the
initial HPT based on the initial guest RAM size, relying on the guest to
resize the HPT when more memory is hot-added. Without this, the hypervisor
must size the HPT for the maximum possible guest RAM, which can lead to
a huge waste of space if the guest never actually expends to that maximum
size.

This patch advertises the guest's support for HPT resizing via the
ibm,client-architecture-support OF interface. We use bit 5 of byte 6 of
option vector 5 for this purpose, as defined in the PAPR ACR "HPT
resizing option".
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Reviewed-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This adds support for using two hypercalls to change the size of the
main hash page table while running as a PAPR guest. For now these
hypercalls are only in experimental qemu versions.

The interface is two part: first H_RESIZE_HPT_PREPARE is used to
allocate and prepare the new hash table. This may be slow, but can be
done asynchronously. Then, H_RESIZE_HPT_COMMIT is used to switch to the
new hash table. This requires that no CPUs be concurrently updating the
HPT, and so must be run under stop_machine().

This also adds a debugfs file which can be used to manually control
HPT resizing or testing purposes.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NPaul Mackerras <paulus@samba.org>
[mpe: Rename the debugfs file to "hpt_order"]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This adds the hypercall numbers and wrapper functions for the hash page
table resizing hypercalls.

These hypercall numbers are defined in the PAPR ACR "HPT resizing
option".

It also adds a new firmware feature flag to track the presence of the
HPT resizing calls.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

List all the current valid compatible strings for the l2cache binding.
This should stop checkpatch.pl from complaining and will hopefully save
someone from having to debug a typo in their dts.
Signed-off-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We don't need asm/xics.h
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Recent versions of OPAL can provide names for the various OPAL interrupts,
so let's use them. This also modernises the code that fetches the
interrupt array to use the helpers provided by the generic code instead
of hand-parsing the property.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Free irqs on error, check allocation of names, consolidate error
      handling, whitespace.]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

On some CAPP errors we see console messages that prints unknown HMIs for
which CAPI recovery is in progress. This patch fixes this by printing
correct error info for HMI generated due to CAPP recovery.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Tested-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

These are common on bare metal machines, so put them in the defconfig.

This adds 216KB to the vmlinux size
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Specifically:
 - CONFIG_BPF_SYSCALL
 - CONFIG_NET_SCHED
 - CONFIG_NET_CLS_BPF
 - CONFIG_NET_CLS_ACT
 - CONFIG_NET_ACT_BPF
 - CONFIG_CGROUP_BPF
 - CONFIG_UPROBE_EVENT

... in pseries, ppc64 and powernv defconfigs.
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Change the device probe test in the via-cuda.c driver so it will load on
Egret-based machines too. Remove the now redundant via-maciisi.c driver.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The Egret system controller was the predecessor to the Cuda and the
differences are minor.

On Cuda, byte acknowledgement requires one transition of the TACK
signal; on Egret two are needed. On Cuda, TIP is active low; on Egret
it is active high. And Cuda raises certain interrupts that Egret omits.

Accomodating these differences complicates the Cuda driver slightly
but avoids a lot of duplication (see next patch).
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Initialize data_index where appropriate to improve readability and
assist debugging. This change doesn't affect driver behaviour.

I prefer to see
	current_req->data[data_index++]
in place of
	current_req->data[0]
or
	current_req->data[1]
inasmuchas it becomes obvious what the data_index variable does.

Moreover, the actual value of data_index when examined at any given moment
tells me something about prior events, which did prove helpful.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The cuda_start() function uses spinlock_irq_save/restore for mutual
exclusion. Let's have cuda_poll() do the same when polling the VIA
interrupt.

The benefit to disabling local irqs when the interrupt is being polled
is that the interrupt handler now has the same timing properties
regardless of whether it is invoked normally or from cuda_poll().

This driver was written back when local irqs remained enabled during
execution of interrupt handlers and cuda_poll() was probably trying
to achieve the same effect by use of enable/disable_irq.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>