- 08 3月, 2006 2 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TG3]: Add DMA address workaround
-
由 Linus Torvalds 提交于
We don't do interruptible waits for the pipe mutex anywhere else any more either, so don't do it in fifo_open() either. Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 3月, 2006 30 次提交
-
-
由 Michael Chan 提交于
Add DMA workaround for chips that do not support full 64-bit DMA addresses. 5714, 5715, and 5780 chips only support DMA addresses less than 40 bits. On 64-bit systems with IOMMU, set the dma_mask to 40-bit so that pci_map_xxx() calls will map the DMA address below 40 bits if necessary. On 64-bit systems without IOMMU, set the dma_mask to 64-bit and check for DMA addresses exceeding the limit in tg3_start_xmit(). 5788 only supports 32-bit DMA so need to set the mask appropriately also. Thanks to Chris Elmquist at SGI for reporting and helping to debug the problem on 5714. Thanks to David Miller for explaining the HIGHMEM and DMA stuff. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/srp: Don't send task management commands after target removal
-
由 Cornelia Huck 提交于
Rather than checking for some known failures, check positively for the success response code 0x0001 and return -EIO for unrecognized failure response codes. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Cc: Greg Smith <gsmith@nc.rr.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Bastian Blank 提交于
Fix matching of devmodel in modaliases. It breaks automatic loading of any dasd module. Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
The Windfarm PID module lacks a licence, it should be GPL, here it is Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
The point of the smaps "shared" is to count the number of pages that are mapped by more than one process, according to Mauricio Lin. However, smaps uses page_count for this, so it will return a false positive for every page that is mapped by just that one process, which is also in pagecache or swapcache. There are false positive situations for anonymous pages not in swapcache as well: - page reclaim, migration - get_user_pages (eg. direct-io, ptrace) Use page_mapcount instead, to count the number of mappings to the page. Use vm_normal_page so that weird things like /dev/mem aren't counted either. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
smaps doesn't have a hugepage pagetable walker. Skip walking hugepage vmas. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Staubach 提交于
ramfs neglects to update the directory mtime and ctime fields when creating a new symbolic link. Ramfs was modified in 2.6.15 to update these fields when other types of entries are created. The symlink support is separate from that other support, so that change did not cover quite all of the possibilities. All of the directory content manipulation entry points now seem to be covered with respect to these time field updates. Signed-off-by: NPeter Staubach <staubach@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Edgar Hucek 提交于
This patch makes the kernel bootable again on ia32 EFI systems. Signed-off-by: NEdgar Hucek <hostmaster@ed-soft.at> Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Change the format of numa_maps to be more compact and contain additional information that is useful for managing and troubleshooting memory on a NUMA system. Numa_maps can now also support huge pages. Fixes: 1. More compact format. Only display fields if they contain additional information. 2. Always display information for all vmas. The old numa_maps did not display vma with no mapped entries. This was a bit confusing because page migration removes ptes for file backed vmas. After page migration a part of the vmas vanished. 3. Rename maxref to maxmap. This is the maximum mapcount of all the pages in a vma and may be used as an indicator as to how many processes may be using a certain vma. 4. Include the ability to scan over huge page vmas. New items shown: dirty Number of pages in a vma that have either the dirty bit set in the page_struct or in the pte. file=<filename> The file backing the pages if any stack Stack area heap Heap area huge Huge page area. The number of pages shows is the number of huge pages not the regular sized pages. swapcache Number of pages with swap references. Must be >0 in order to be shown. active Number of active pages. Only displayed if different from the number of pages mapped. writeback Number of pages under writeback. Only displayed if >0. Sample ouput of a process using huge pages: 00000000 default 2000000000000000 default file=/lib/ld-2.3.90.so mapped=13 mapmax=30 N0=13 2000000000044000 default file=/lib/ld-2.3.90.so anon=2 dirty=2 swapcache=2 N2=2 2000000000064000 default file=/lib/librt-2.3.90.so mapped=2 active=1 N1=1 N3=1 2000000000074000 default file=/lib/librt-2.3.90.so 2000000000080000 default file=/lib/librt-2.3.90.so anon=1 swapcache=1 N2=1 2000000000084000 default 2000000000088000 default file=/lib/libc-2.3.90.so mapped=52 mapmax=32 active=48 N0=52 20000000002bc000 default file=/lib/libc-2.3.90.so 20000000002c8000 default file=/lib/libc-2.3.90.so anon=3 dirty=2 swapcache=3 active=2 N1=1 N2=2 20000000002d4000 default anon=1 swapcache=1 N1=1 20000000002d8000 default file=/lib/libpthread-2.3.90.so mapped=8 mapmax=3 active=7 N2=2 N3=6 20000000002fc000 default file=/lib/libpthread-2.3.90.so 2000000000308000 default file=/lib/libpthread-2.3.90.so anon=1 dirty=1 swapcache=1 N1=1 200000000030c000 default anon=1 dirty=1 swapcache=1 N1=1 2000000000320000 default anon=1 dirty=1 N1=1 200000000071c000 default 2000000000720000 default anon=2 dirty=2 swapcache=1 N1=1 N2=1 2000000000f1c000 default 2000000000f20000 default anon=2 dirty=2 swapcache=1 active=1 N2=1 N3=1 200000000171c000 default 2000000001720000 default anon=1 dirty=1 swapcache=1 N1=1 2000000001b20000 default 2000000001b38000 default file=/lib/libgcc_s.so.1 mapped=2 N1=2 2000000001b48000 default file=/lib/libgcc_s.so.1 2000000001b54000 default file=/lib/libgcc_s.so.1 anon=1 dirty=1 active=0 N1=1 2000000001b58000 default file=/lib/libunwind.so.7.0.0 mapped=2 active=1 N1=2 2000000001b74000 default file=/lib/libunwind.so.7.0.0 2000000001b80000 default file=/lib/libunwind.so.7.0.0 2000000001b84000 default 4000000000000000 default file=/media/huge/test9 mapped=1 N1=1 6000000000000000 default file=/media/huge/test9 anon=1 dirty=1 active=0 N1=1 6000000000004000 default heap 607fffff7fffc000 default anon=1 dirty=1 swapcache=1 N2=1 607fffffff06c000 default stack anon=1 dirty=1 active=0 N1=1 8000000060000000 default file=/mnt/huge/test0 huge dirty=3 N1=3 8000000090000000 default file=/mnt/huge/test1 huge dirty=3 N0=1 N2=2 80000000c0000000 default file=/mnt/huge/test2 huge dirty=3 N1=1 N3=2 Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Takashi Iwai 提交于
Fix bugs in error paths of snd_ctl_elem_add() - NULL reference - double free (already freed in snd_ctl_add()) Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Atsushi Nemoto 提交于
Add a compiler barrier so that we don't read jiffies before updating jiffies_64. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jack Steiner 提交于
Systems with extemely large numbers of nodes or cpus need to kmalloc structures larger than is currently supported. This patch increases the maximum supported size for very large systems. This patch should have no effect on current systems. (akpm: why not just use alloc_pages() for sysfs_cpus?) Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 KAMEZAWA Hiroyuki 提交于
include/linux/memory_hotplug.h:53: warning: 'struct page' declared inside parameter list (akpm: I tossed in a couple more possibly-needed-sometime struct decls too) Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
Add the missing pm_power_off's for the h8300, v850 and xtensa architectures. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Blunck 提交于
When CONFIG_VIRT_CPU_ACCOUNTING is not defined compiling fails with an undefined reference to account_vtime(). Signed-off-by: NJan Blunck <jblunck@suse.de> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tony Lindgren 提交于
Also from Thomas Gleixner <tglx@linutronix.de> Function next_timer_interrupt() got broken with a recent patch 6ba1b912 as sys_nanosleep() was moved to hrtimer. This broke things as next_timer_interrupt() did not check hrtimer tree for next event. Function next_timer_interrupt() is needed with dyntick (CONFIG_NO_IDLE_HZ, VST) implementations, as the system can be in idle when next hrtimer event was supposed to happen. At least ARM and S390 currently use next_timer_interrupt(). Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Atsushi Nemoto 提交于
i386 timer_resume is updating jiffies, not jiffies_64. It looks there is a potential overflow problem. And jiffies_64 and wall_jiffies should be protected by xtime_lock. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Karsten Keil 提交于
This patch fix some compatiblity issues with big endian systems Signed-off-by: NMartin Bachem <info@colognechip.com> Signed-off-by: NKarsten Keil <kkeil@suse.de> Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Karsten Keil 提交于
If the same ttyIx device was opened by two processes the module was not released and so the usage count went never to zero again. This oneliner fixes the issue. Signed-off-by: NOskar Senft <o.senft@sirrix.com> Signed-off-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Karsten Keil 提交于
Add new PCI IDs for HFC-S PCI based ISDN TA 'Primux II S0' and 'Primux II S0' from Gerdes AG Signed-off-by: NMartin Bachem <info@colognechip.com> Signed-off-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Johnson 提交于
Fix handling of cramfs images created by util-linux containing empty regular files. Images created by cramfstools 1.x were ok. Fill out inode contents in cramfs_iget5_set() instead of get_cramfs_inode() to prevent issues if cramfs_iget5_test() is called with I_LOCK|I_NEW still set. Signed-off-by: NDave Johnson <djohnson+linux-kernel@sw.starentnetworks.com> Cc: Olaf Hering <olh@suse.de> Cc: Chris Mason <mason@suse.com> Cc: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
If we triggered the 'offslab_limit' test, we would return with cachep->gfporder incremented once too many times. This clarifies the logic somewhat, and fixes that bug. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
The SCSI layer uses SCSI_SENSE_BUFFERSIZE (96) for the sense buffer size, even though some other code uses "sizeof(struct request_sense)" (which is 64 bytes). Allocate the buffer using the bigger of the two for safety. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Just to be safe, we should not trigger a conditional reschedule during the early boot sequence. We've historically done some questionable early on, and the safety warnings in __might_sleep() are generally turned off during that period, so there might be problems lurking. This affects CONFIG_PREEMPT_VOLUNTARY, which takes over might_sleep() to cause a voluntary conditional reschedule. Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Kroah-Hartman 提交于
This fixes a use-after-free bug in the usb-serial core. It is simple to trigger this (open a usb-serial port, then yank the device out before closing the port.) Thanks to Stefan Seyfried <seife@suse.de> for reporting this, and to the slab debugging code which enabled it to be tracked down. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] chelsio: fix kmalloc failure in t1_espi_create Merge branch 'master' s2io: set_multicast_list bug
-
由 Linus Torvalds 提交于
We want to use the "struct slab" size, not the size of the pointer to same. As it is, we'd not print out the last <n> entry pointers in the slab (where <n> is ~10, depending on whether it's a 32-bit or 64-bit kernel). Gaah, that slab code was written by somebody who likes unreadable crud. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric Sesterhenn 提交于
memset() is called before check. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
-
- 06 3月, 2006 2 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6-stable: [CIFS] Always match oplock break (cache notification) to the right tcp
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Mark __ex_table section correctly.
-
- 05 3月, 2006 6 次提交
-
-
由 David S. Miller 提交于
We must use the "a" (allocate) attribute every time we emit an entry into the __ex_table section. For consistency, use "a" instead of #alloc which is some Solaris compat cruft GNU as provides on Sparc. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian McDonald 提交于
In rare circumstances 0 is returned by dccp_li_hist_calc_i_mean which leads to a divide by zero in ccid3_hc_rx_packet_recv. Explicitly check for zero return now. Update copyright notice at same time. Found by Arnaldo. Signed-off-by: NIan McDonald <imcdnzl@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chas Williams 提交于
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The earlier round of kobject/sysfs changes to bridge caused it not to generate a uevent on removal. Don't think any application cares (not sure about Xen) but since it generates add uevent it should generate remove as well. Signed-off-by: NStephen Hemminger <shemmigner@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Initialize the STP timers for a port when it is created, rather than when it is enabled. This will prevent future race conditions where timer gets started before port is enabled. Signed-off-by: NStephen Hemminger <shemmigner@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-