- 17 1月, 2009 6 次提交
-
-
由 Len Brown 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Len Brown 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Jonathan McDowell 提交于
Although rfkill support for the EEE bluetooth device has been added to 2.6.28-rc the appropriate ACPI accessor definitions were not added, so the support was non functional. The patch below adds the get and set accessors and has been verified to work on an EEE 901. Signed-off-by: NJonathan McDowell <noodles@earth.li> Acked-by: NMatthew Garrett <mjg@redhat.com> Acked-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 David Brownell 提交于
Make the comment for ACPI_FADT_S4_RTC_WAKE match the ACPI spec; that bit has nothing to do with status bits. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Masami Hiramatsu 提交于
Check CONFIG_FREEZER instead of CONFIG_PM because kprobe booster depends on freeze_processes() and thaw_processes() when CONFIG_PREEMPT=y. This fixes a linkage error which occurs when CONFIG_PREEMPT=y, CONFIG_PM=y and CONFIG_FREEZER=n. Reported-by: NCheng Renquan <crquan@gmail.com> Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Rafael J. Wysocki 提交于
Freezer fails to compile if with the following configuration settings: CONFIG_CGROUPS=y CONFIG_CGROUP_FREEZER=y CONFIG_MODULES=y CONFIG_FREEZER=y CONFIG_PM=y CONFIG_PM_SLEEP=n Fix this by making process.o compilation depend on CONFIG_FREEZER. Reported-by: NCheng Renquan <crquan@gmail.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 11 1月, 2009 4 次提交
-
-
由 Linus Torvalds 提交于
-
由 Arjan van de Ven 提交于
It is useful for diagnosing boot performance to see where async function calls are waiting on serialization... this patch adds this functionality to the bootgraph.pl script. The waiting time is shown as a half transparent, gray bar through the block that is waiting. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arjan van de Ven 提交于
In a discussio with Jeff Garzik, he mentioned that the serialization for the libata port probes only needs to be within the domain of a host. This means that for the first port of each host (with ID 0), we don't need to wait, so we can relax our serialization a little. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arjan van de Ven 提交于
This patch adds a per host flag that allows drivers to opt in into having its busses scanned in parallel. Drivers that do not set this flag get their ports scanned in the "original" sequence. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 1月, 2009 30 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (36 commits) x86: fix section mismatch warnings in mcheck/mce_amd_64.c x86: offer frame pointers in all build modes x86: remove duplicated #include's x86: k8 numa register active regions later x86: update Alan Cox's email addresses x86: rename all fields of mpc_table mpc_X to X x86: rename all fields of mpc_oemtable oem_X to X x86: rename all fields of mpc_bus mpc_X to X x86: rename all fields of mpc_cpu mpc_X to X x86: rename all fields of mpc_intsrc mpc_X to X x86: rename all fields of mpc_lintsrc mpc_X to X x86: rename all fields of mpc_iopic mpc_X to X x86: irqinit_64.c init_ISA_irqs should be static Documentation/x86/boot.txt: payload length was changed to payload_length x86: setup_percpu.c fix style problems x86: irqinit_64.c fix style problems x86: irqinit_32.c fix style problems x86: i8259.c fix style problems x86: irq_32.c fix style problems x86: ioport.c fix style problems ...
-
由 Linus Torvalds 提交于
Merge branch 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: [IA64] fix typo in cpumask_of_pcibus() x86: fix x86_32 builds for summit and es7000 arch's cpumask: use work_on_cpu in acpi-cpufreq.c for read_measured_perf_ctrs cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write cpumask: use cpumask_var_t in acpi-cpufreq.c cpumask: use work_on_cpu in acpi/cstate.c cpumask: convert struct cpufreq_policy to cpumask_var_t cpumask: replace CPUMASK_ALLOC etc with cpumask_var_t x86: cleanup remaining cpumask_t ops in smpboot code cpumask: update pci_bus_show_cpuaffinity to use new cpumask API cpumask: update local_cpus_show to use new cpumask API ia64: cpumask fix for is_affinity_mask_valid()
-
由 Linus Torvalds 提交于
Commit c4be0c1d added the ability for write_super_lockfs to return errors, and renamed them to match. But btrfs didn't get converted. Do the minimal conversion to make it compile again. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Artem Bityutskiy 提交于
The 'rb_first()', 'rb_last()', 'rb_next()' and 'rb_prev()' calls take a pointer to an RB node or RB root. They do not change the pointed objects, so add a 'const' qualifier in order to make life of the users of these functions easier. Indeed, if I have my own constant pointer &const struct my_type *p, and I call 'rb_next(&p->rb)', I get a GCC warning: warning: passing argument 1 of ‘rb_next’ discards qualifiers from pointer target type Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Piel 提交于
The sensor can be accessed via various buses. In particular, SPI, I²C and, on HP laptops, via a specific ACPI API (the only one currently supported). Separate this latest platform from the core of the sensor driver to allow support for the other bus type. The second, and more direct goal is actually to be able to merge this part with the hp-disk-leds driver, which has the same ACPI PNP number. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Takashi Sato 提交于
It removes XFS specific ioctl interfaces and request codes for freeze feature. This patch has been supplied by David Chinner. Signed-off-by: NDave Chinner <dgc@sgi.com> Signed-off-by: NTakashi Sato <t-sato@yk.jp.nec.com> Cc: Dave Chinner <david@fromorbit.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Takashi Sato 提交于
The ioctls for the generic freeze feature are below. o Freeze the filesystem int ioctl(int fd, int FIFREEZE, arg) fd: The file descriptor of the mountpoint FIFREEZE: request code for the freeze arg: Ignored Return value: 0 if the operation succeeds. Otherwise, -1 o Unfreeze the filesystem int ioctl(int fd, int FITHAW, arg) fd: The file descriptor of the mountpoint FITHAW: request code for unfreeze arg: Ignored Return value: 0 if the operation succeeds. Otherwise, -1 Error number: If the filesystem has already been unfrozen, errno is set to EINVAL. [akpm@linux-foundation.org: fix CONFIG_BLOCK=n] Signed-off-by: NTakashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: NMasayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Takashi Sato 提交于
Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: NTakashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: NMasayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Harvey Harrison 提交于
The code was shifting the endianness appropriately everywhere, annotate the structs to avoid the sparse warnings when assigning the endian types to the struct members, or passing them to be[16|32]_to_cpu: drivers/memstick/core/mspro_block.c:331:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:333:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:335:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:337:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:341:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:347:4: warning: cast to restricted __be32 drivers/memstick/core/mspro_block.c:356:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:358:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:364:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:367:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:369:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:371:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:377:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:478:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:480:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:482:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:484:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:486:4: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:689:22: expected unsigned int [unsigned] [assigned] data_address drivers/memstick/core/mspro_block.c:689:22: got restricted __be32 [usertype] <noident> drivers/memstick/core/mspro_block.c:697:3: warning: cast to restricted __be32 drivers/memstick/core/mspro_block.c:960:17: warning: incorrect type in initializer (different base types) drivers/memstick/core/mspro_block.c:960:17: expected unsigned short [unsigned] data_count drivers/memstick/core/mspro_block.c:960:17: got restricted __be16 [usertype] <noident> drivers/memstick/core/mspro_block.c:993:6: warning: cast to restricted __be16 drivers/memstick/core/mspro_block.c:995:28: warning: cast to restricted __be16 Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Larry Finger 提交于
Compilation of the HP WMI hotkeys code results in the following: CC [M] drivers/platform/x86/hp-wmi.o drivers/platform/x86/hp-wmi.c: In function hp_wmi_bios_setup: drivers/platform/x86/hp-wmi.c:431: warning: ignoring return value of rfkill_register, declared with attribute warn_unused_result drivers/platform/x86/hp-wmi.c:441: warning: ignoring return value of rfkill_register, declared with attribute warn_unused_result drivers/platform/x86/hp-wmi.c:450: warning: ignoring return value of rfkill_register, declared with attribute warn_unused_result Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Requested by C. Lameter Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mike Travis <travis@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Kernels that don't support ELF coredumps at all surely can't be supporting new partial-segment flavored ELF coredumps ... don't make folk answer Kconfig questions about that flavor. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-2由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-2: async: make async a command line option for now partial revert of asynchronous inode delete
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Revert "driver core: create a private portion of struct device" Revert "driver core: move klist_children into private structure" Revert "driver core: move knode_driver into private structure" Revert "driver core: move knode_bus into private structure"
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: fix sleep in atomic context due to driver core change
-
git://git.infradead.org/mtd-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/mtd-2.6: [JFFS2] remove junk prototypes
-
git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6由 Linus Torvalds 提交于
* 'for_2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6: (28 commits) mISDN: Add HFC USB driver mISDN: Add layer1 prim MPH_INFORMATION_REQ mISDN: Fix kernel crash when doing hardware conference with more than two members mISDN: Added missing create_l1() call mISDN: Add MODULE_DEVICE_TABLE() to hfcpci mISDN: Minor cleanups mISDN: Create /sys/class/mISDN mISDN: Add missing release functions mISDN: Add different different timer settings for hfc-pci mISDN: Minor fixes mISDN: Correct busy device detection mISDN: Fix deactivation, if peer IP is removed from l1oip instance. mISDN: Add ISDN_P_TE_UP0 / ISDN_P_NT_UP0 mISDN: Fix irq detection mISDN: Add ISDN sample clock API to mISDN core mISDN: Return error on E-channel access mISDN: Add E-Channel logging features mISDN: Use protocol to detect D-channel mISDN: Fixed more indexing bugs mISDN: Make debug output a little bit more verbose ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus: MAINTAINERS: squashfs entry Squashfs: documentation Squashfs: initrd support Squashfs: Kconfig entry Squashfs: Makefiles Squashfs: header files Squashfs: block operations Squashfs: cache operations Squashfs: uid/gid lookup operations Squashfs: fragment block operations Squashfs: export operations Squashfs: super block operations Squashfs: symlink operations Squashfs: regular file operations Squashfs: directory readdir operations Squashfs: directory lookup operations Squashfs: inode operations
-
由 Greg Kroah-Hartman 提交于
This reverts commit 2831fe6f. Turns out that device_initialize shouldn't fail silently. This series needs to be reworked in order to get into proper shape. Reported-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This reverts commit 11c3b5c3. Turns out that device_initialize shouldn't fail silently. This series needs to be reworked in order to get into proper shape. Reported-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This reverts commit 93e746db. Turns out that device_initialize shouldn't fail silently. This series needs to be reworked in order to get into proper shape. Reported-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This reverts commit b9daa99e. Turns out that device_initialize shouldn't fail silently. This series needs to be reworked in order to get into proper shape. Reported-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stefan Richter 提交于
Due to commit 2831fe6f, "driver core: create a private portion of struct device", device_initialize() can no longer be called from atomic contexts. We now defer it until after config ROM probing. This requires changes to the bus manager code because this may use a device before it was probed. Reported-by: NJay Fenlason <fenlason@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-nommu由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-nommu: NOMMU: Support XIP on initramfs NOMMU: Teach kobjsize() about VMA regions. FLAT: Don't attempt to expand the userspace stack to fill the space allocated FDPIC: Don't attempt to expand the userspace stack to fill the space allocated NOMMU: Improve procfs output using per-MM VMAs NOMMU: Make mmap allocation page trimming behaviour configurable. NOMMU: Make VMAs per MM as for MMU-mode linux NOMMU: Delete askedalloc and realalloc variables NOMMU: Rename ARM's struct vm_region NOMMU: Fix cleanup handling in ramfs_nommu_get_umapped_area()
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: CRED: Fix commit_creds() on a process that has no mm
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] update documentation for hvc_iucv kernel parameter. [S390] hvc_iucv: Special handling of IUCV HVC devices [S390] hvc_iucv: Refactor console and device initialization [S390] hvc_iucv: Update function documentation [S390] hvc_iucv: Limit rate of outgoing IUCV messages [S390] hvc_iucv: Change IUCV term id and use one device as default [S390] Use unsigned long long for u64 on 64bit. [S390] qdio: fix broken pointer in case of CONFIG_DEBUG_FS is disabled [S390] vdso: compile fix [S390] remove code for oldselect system call [S390] types: add/fix types.h include in header files [S390] dasd: add device attribute to disable blocking on lost paths [S390] dasd: send change uevents for dasd block devices [S390] tape block: fix dependencies [S390] asm-s390/posix_types.h: drop __USE_ALL usage [S390] gettimeofday.S: removed duplicated #includes [S390] ptrace: no extern declarations for userspace
-
git://git.o-hand.com/linux-rpurdie-leds由 Linus Torvalds 提交于
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: ledtrig-timer - on deactivation hardware blinking should be disabled leds: Add suspend/resume to the core class leds: Add WM8350 LED driver leds: leds-pcs9532 - Move i2c work to a workqueque leds: leds-pca9532 - fix memory leak and properly handle errors leds: Fix wrong loop direction on removal in leds-ams-delta leds: fix Cobalt Raq LED dependency leds: Fix sparse warning in leds-ams-delta leds: Fixup kdoc comment to match parameter names leds: Make header variable naming consistent leds: eds-pca9532: mark pca9532_event() static leds: ALIX.2 LEDs driver
-
git://git.o-hand.com/linux-rpurdie-backlight由 Linus Torvalds 提交于
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: Rename the corgi backlight driver to generic backlight: add support for Toppoly TDO35S series to tdo24m lcd driver backlight: Add suspend/resume support to the backlight core bd->props.brightness doesn't reflect the actual backlight level. backlight: Support VGA/QVGA mode switching in tosa_lcd backlight: Catch invalid input in sysfs attributes backlight: Value of ILI9320_RGB_IF2 register should not be hardcoded backlight: crbllcd_bl - Use platform_device_register_simple() backlight: progear_bl - Use platform_device_register_simple() backlight: hp680_bl - Use platform_device_register_simple()
-
由 Karsten Keil 提交于
Enable support for USB ISDN TAs with Cologne Chip AG's HFC-S USB ISDN Controller. Signed-off-by: NMartin Bachem <m.bachem@gmx.de> Signed-off-by: NKarsten Keil <kkeil@suse.de>
-
由 Martin Bachem 提交于
MPH_INFORMATION provides full D- and B-Channel status overview - new layer1 primitive: MPF_INFORMATON_REQ - layer1 replies with MPH_INFORMATION_IND containing - dch->[state,Flags,nrbchan] - bch[]->[protocol,Flags] - hardware driver should send MPH_INFORMATION_IND on all ph state changes and BChannel state changes to MISDN_ID_ANY Signed-off-by: NMartin Bachem <m.bachem@gmx.de> Signed-off-by: NKarsten Keil <kkeil@suse.de>
-