- 29 8月, 2010 4 次提交
-
-
由 Akinobu Mita 提交于
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Ion Badulescu <ionut@badula.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Akinobu Mita 提交于
Replace open-coded loop with for_each_set_bit(). Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Akinobu Mita 提交于
Replace loops calling set_bit() and clear_bit() with bitmap_set() and bitmap_clear(). Unlike loops calling set_bit() and clear_bit(), bitmap_set() and bitmap_clear() are not atomic. But this is ok. Because the bitmap operations are protected by bitmap->lock except for initialization of the bitmap in mlx4_bitmap_init(). Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Akinobu Mita 提交于
The spinlock aun_queue_lock is initialized statically. It is unnecessary to initialize by spin_lock_init() at module load time. This is detected by the semantic patch. // <smpl> @def@ declarer name DEFINE_SPINLOCK; identifier spinlock; @@ DEFINE_SPINLOCK(spinlock); @@ identifier def.spinlock; @@ - spin_lock_init(&spinlock); // </smpl> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 8月, 2010 1 次提交
-
-
由 Tobias Klauser 提交于
Use net_device->stats for stats instead of private variable copies in struct slip. Use ndo_get_stat64 so the additions can be performed on a private destination buffer. Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 8月, 2010 12 次提交
-
-
由 Eric Dumazet 提交于
bnx2x_trylock_hw_lock() returns a bool : true if succeeded to acquire the lock. false in case of error. -EINVAL is not an acceptable value, since its promoted to true. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
compare_ether_header() can have a special implementation on 64 bit arches if CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is defined. __napi_gro_receive() and vlan_gro_common() can avoid a conditional branch to perform device match. On x86_64, __napi_gro_receive() has now 38 instructions instead of 53 As gcc-4.4.3 still choose to not inline it, add inline keyword to this performance critical function. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Based upon a report by Stephen Rothwell. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Added PCI ID to board info. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anirban Chakraborty 提交于
If there is a FW hang when the driver loads, it can not determine the FW operational mode. Fix it by checking the FW state first before issuing any FW commands to determine its capabilities and thereby detecting driver operational mode. Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
In the original code, the error codes returned from some of the functions are not caught and sent up the caller chain. Fixed it here. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
strlcpy() returns the total length of the string they tried to create, so we should not use its return value without any check. scnprintf() returns the number of characters written into @buf not including the trailing '\0', so use it instead here. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Change SCTP_DEBUG_PRINTK and SCTP_DEBUG_PRINTK_IPADDR to use do { print } while (0) guards. Add SCTP_DEBUG_PRINTK_CONT to fix errors in log when lines were continued. Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Add a missing newline in "Failed bind hash alloc" Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Switch from GFP_ATOMIC allocations to GFP_KERNEL ones in ip_vs_add_service() and ip_vs_new_dest(), as we hold a mutex and are allowed to sleep in this context. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Also rename __ip_vs_securetcp_lock to ip_vs_securetcp_lock. Spinlock conversion was suggested by Eric Dumazet. Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Also rename __ip_vs_sched_lock to ip_vs_sched_lock. Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Cc: Xiaoyu Du <tingsrain@gmail.com> Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 8月, 2010 22 次提交
-
-
由 Rasesh Mody 提交于
This is the patch to fix the build break caused by multiple definitions of symbols between Brocade's FC/FCOE driver(BFA) and 10G Networking Driver(BNA). Changes are: 1. locally used functions are made static 2. unused functions are removed 3. using unique namespaces for the function names that must be globally visible Signed-off-by: NDebashis Dutt <ddutt@brocade.com> Signed-off-by: NRasesh Mody <rmody@brocade.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Kirjanov 提交于
Free irq line on error path. Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org> Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amerigo Wang 提交于
Remove "lro" parameter of s2io driver. Signed-off-by: NWANG Cong <amwang@redhat.com> Cc: jon.mason@exar.com Acked-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Counters for packets received due to internal switching are already available. This change will start displaying them in ethtool -S Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
The BE ASIC/firmware doesnot reserve and assign MAC address for VFs. This results in the VF interfaces being created with MAC Address 0. The code change proposed takes the MAC address of PF to generate a seed. MAC Address for VFs are assigned incrementally starting from the seed. These addresses are programmed in the ASIC by the PF and the VF driver queries for the MAC address during its probe. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
If bridge port is offline, don't call ethtool to query speed. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Breno Leitao 提交于
Currently qlge can deadlock when the interface is going down, and the mpi_port_cfg_work() is executing on another processor. It happens because unregister_netdev() holds the rtnl lock, and the mpi_port_cfg_work() also request this lock. Since unregiter_netdev() may wait mpi_port_cfg_work(), who also request the holding lock, it can cause an deadlock, displaying the following error: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. rmmod D 00000080c6c1d190 0 3993 2081 0x00008080 Call Trace: [c000000975f56ee0] [c0000000000152a0] .__switch_to+0x100/0x1d0 [c000000975f56f70] [c0000000005781b4] .schedule+0x3a4/0x8c0 [c000000975f570c0] [c000000000578e8c] .schedule_timeout+0x24c/0x350 [c000000975f571e0] [c000000000578a88] .wait_for_common+0x198/0x210 [c000000975f572c0] [c0000000000abbb4] .__cancel_work_timer+0x2c4/0x2e0 [c000000975f57400] [d0000000078e7a20] .ql_adapter_down+0x80/0x260 [qlge] [c000000975f574b0] [d0000000078e7d80] .qlge_close+0x70/0x130 [qlge] [c000000975f57540] [c000000000497ef8] .__dev_close+0x98/0xf0 [c000000975f575d0] [c000000000497f74] .dev_close+0x24/0x60 [c000000975f57650] [c000000000498080] .rollback_registered_many+0xd0/0x2b0 [c000000975f576f0] [c000000000498338] .rollback_registered+0x38/0x50 [c000000975f57780] [c0000000004983d8] .unregister_netdevice_queue+0x88/0xe0 [c000000975f57810] [c000000000498574] .unregister_netdev+0x24/0x40 [c000000975f57890] [d0000000078f6f38] .qlge_remove+0x3c/0x78 [qlge] [c000000975f57920] [c0000000002d9298] .pci_device_remove+0x48/0x90 [c000000975f579a0] [c000000000372850] .__device_release_driver+0xa0/0x130 [c000000975f57a30] [c000000000372a08] .driver_detach+0x128/0x150 [c000000975f57ad0] [c000000000371134] .bus_remove_driver+0xc4/0x1a0 [c000000975f57b70] [c00000000037357c] .driver_unregister+0x8c/0xd0 [c000000975f57c00] [c0000000002d968c] .pci_unregister_driver+0x5c/0x110 [c000000975f57ca0] [d0000000078f6ee4] .qlge_exit+0x1c/0x34 [qlge] Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The carrier check is not called from work queue in current code. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
__ip_vs_service_get and __ip_vs_svc_fwm_get increment a reference count, so that reference count should be decremented before leaving the function in an error case. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E; identifier f1; iterator I; @@ x = __ip_vs_service_get(...); <... when != x when != true (x == NULL || ...) when != if (...) { <+...x...+> } when != I (...) { <+...x...+> } ( x == NULL | x == E | x->f1 ) ...> * return ...; // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
dev_alloc_skb allocates some memory, so that memory should be freed before leaving the function in an error case. Corrected some typos in a nearby comment as well. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E; identifier f1; iterator I; @@ x = dev_alloc_skb(...); <... when != x when != true (x == NULL || ...) when != if (...) { <+...x...+> } when != I (...) { <+...x...+> } ( x == NULL | x == E | x->f1 ) ...> * return ...; // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Its important to store 'final' values in counters, not using them as temporary variables, or this might break some SNMP applications. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NDavid Dillow <dave@thedillows.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
This return isn't reachable and it obscures the goto on the line before. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This avoids unnecessary casting and adds the ioaddr in the private structure. This patch also removes many warning when compile the driver. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch removes the CPU_SUBTYPE_ST40 dependency in the driver's Kconfig. In fact, this option has been removed in the commit: f9669187 as reported by Christian Dietrich. Note that the driver remains tested on STM platforms, only. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pawel Moll 提交于
This patch modifies the stmmac_adjust_link() function so the fix_mac_speed() is called not only when link speed is changing between 10 and 100 Mbps (as required in RMII mode) but also for 1000 Mbps. Signed-off-by: NPawel Moll <pawel.moll@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use a private variable to fold rx_dropped value, instead of shared destination buffer, as it might break SNMP applications. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Eilon Greenstein <eilong@broadcom.com> CC: Dmitry Kravkov <dmitry@broadcom.com> Acked-By: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
"foo = &function" is more commonly written "foo = function" Done with coccinelle script: // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> drivers/net/tehuti.c used a function and struct with the same name, the function was renamed. Compile tested x86 only. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Change QLCNIC_CRB_DEV_REF_COUNT to QLCNIC_CRB_DRV_ACTIVE to match document. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Privilege function should wait for npar state to be operational before creating context. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
On NIC Partition capable adapter, Administrator can configure to tag packet with particular vlan id. Packet will be tagged and strip with that vlan id. Also if 'Tagging' flag is disable, other packet will be drop. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o remove validation before deleting vlan id o Add missing 'break' while deleting vlan id. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_sdio.c
-
- 25 8月, 2010 1 次提交
-
-
由 David S. Miller 提交于
drivers/net/mlx4/en_rx.c: In function ‘mlx4_en_create_rx_ring’: drivers/net/mlx4/en_rx.c:305: warning: label ‘err_map’ defined but not used Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-