The Designware USB3 IP can be configured with
an internal xHCI. If we're running on such a
version, let's start the xHCI stack.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

There's no need to add driver_data for something
we can fetch from HW.

This also makes our id_table unnecessary - at least
for now -, so we also remove it on the same patch.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

This will allow us to only allocate memory when
we actually need.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

this is mainly for testing. In order to be able
to test if we're enumerating correctly on all
speeds, let that be controlled by a module
parameter.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

when we remove the gadget driver, it will already
do that for us.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Modify initialization of PCIe capability registers in Tsi721 mport driver:
 - change Completion Timeout value to avoid unexpected data transfer
   aborts during intensive traffic.
 - replace hardcoded offset of PCIe capability block by making it use the
   common function.

This patch is applicable to kernel versions starting from 3.2-rc1.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Bug fix for Tsi721 RapidIO mport driver: Tsi721 supports four RapidIO
mailboxes (MBOX0 - MBOX3) as defined by RapidIO specification.  Mailbox
resources has to be properly reported to allow use of all available
mailboxes (initial version reports only MBOX0).

This patch is applicable to kernel versions staring from 3.2-rc1.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace the pair dma_alloc_coherent()+memset() with the new
dma_zalloc_coherent() added by Andrew Morton for kernel version 3.2
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If an error occurs after the clock is enabled, the enable/disable state
can become unbalanced.
Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

NULL pointer access causes crash in raid5 module.
Signed-off-by: NAdam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

Once a device is failed we really want to completely ignore it.
It should go away soon anyway.

In particular the presence of bad blocks on it should not cause us to
block as we won't be trying to write there anyway.

So as soon as we can check if a device is Faulty, do so and pretend
that it is already gone if it is Faulty.
Signed-off-by: NNeilBrown <neilb@suse.de>

When we mark blocks as bad we need them to be acknowledged by the
metadata handler promptly.

For an in-kernel metadata handler that was already being done.  But
for an external metadata handler we need to alert it of the change by
sending a notification through the sysfs file.  This adds that
notification.
Signed-off-by: NNeilBrown <neilb@suse.de>

Once a device is marked Faulty the badblocks - whether acknowledged or
not - become irrelevant.  So they shouldn't cause the device to be
marked as Blocked.

Without this patch, a process might write "-blocked" to clear the
Blocked status, but while that will correctly fail the device, it
won't remove the apparent 'blocked' status.
Signed-off-by: NNeilBrown <neilb@suse.de>

When we are accessing an mddev via sysfs we know that the
mddev cannot disappear because it has an embedded kobj which
is refcounted by sysfs.
And we also take the mddev_lock.
However this is not enough.

The final mddev_put could have been called and the
mddev_delayed_delete is waiting for sysfs to let go so it can destroy
the kobj and mddev.
In this state there are a lot of changes that should not be attempted.

To to guard against this we:
 - initialise mddev->all_mddevs in on last put so the state can be
   easily detected.
 - in md_attr_show and md_attr_store, check ->all_mddevs under
   all_mddevs_lock and mddev_get the mddev if it still appears to
   be active.

This means that if we get to sysfs as the mddev is being deleted we
will get -EBUSY.

rdev_attr_store and rdev_attr_show are similar but already have
sufficient protection.  They check that rdev->mddev still points to
mddev after taking mddev_lock.  As this is cleared  before delayed
removal which can only be requested under the mddev_lock, this
ensure the rdev and mddev are still alive.
Signed-off-by: NNeilBrown <neilb@suse.de>

We like md devices to disappear when they really are not needed.
However it is not possible to tell from the current state whether it
is needed or not.  We can only tell from recent history of changes.

In particular immediately after we create an md device it looks very
similar to immediately after we have finished with it.

So we always preserve a newly created md device until something
significant happens.  This state is stored in 'hold_active'.

The normal case is to keep it until an ioctl happens, as that will
normally either activate it, or explicitly de-activate it.  If it
doesn't then it was probably created by mistake and it is now time to
get rid of it.

We can also modify an array via sysfs (instead of via ioctl) and we
currently treat any change via sysfs like an ioctl as a sign that if
it now isn't more active, it should be destroyed.
However this is not appropriate as changes made via sysfs are more
gradual so we should look for a more definitive change.

So this patch only clears 'hold_active' from UNTIL_IOCTL to clear when
the array_state is changed via sysfs.  Other changes via sysfs
are ignored.
Signed-off-by: NNeilBrown <neilb@suse.de>

Disabling all runtime PM during system shutdown turns out not to be a
good idea, because some devices may need to be woken up from a
low-power state at that time.

The whole point of disabling runtime PM for system shutdown was to
prevent untimely runtime-suspend method calls.  This patch (as1504)
accomplishes the same result by incrementing the usage count for each
device and waiting for ongoing runtime-PM callbacks to finish.  This
is what we already do during system suspend and hibernation, which
makes sense since the shutdown method is pretty much a legacy analog
of the pm->poweroff method.

This fixes a recent regression on some OMAP systems introduced by
commit af8db150 (PM / driver core:
disable device's runtime PM during shutdown).
Reported-and-tested-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Fixes:
The function __devinit spi_gpio_probe() references
a function __init spi_gpio_alloc.isra.4().
If spi_gpio_alloc.isra.4 is only used by spi_gpio_probe then
annotate spi_gpio_alloc.isra.4 with a matching annotation.

[wsa: fix spi_gpio_request(), too]
Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>

When spi_fsl_espi is chosen to be built as a module, there is a build
error because we test only CONFIG_SPI_FSL_ESPI in declaration of
struct mpc8xxx_spi in drivers/spi/spi_fsl_lib.h. Also some called
functions are not exported.

So we forbid CONFIG_SPI_FSL_ESPI to be tristate here.

The error looks like:
drivers/spi/spi_fsl_espi.c: In function 'fsl_espi_bufs':
drivers/spi/spi_fsl_espi.c:232: error: 'struct mpc8xxx_spi' has no member named 'len'
...
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>

Include linux/module.h to fix below build error:

  CC      drivers/spi/spi-nuc900.o
drivers/spi/spi-nuc900.c:484: error: 'THIS_MODULE' undeclared here (not in a function)
drivers/spi/spi-nuc900.c:489: error: expected declaration specifiers or '...' before string constant
drivers/spi/spi-nuc900.c:489: warning: data definition has no type or storage class
drivers/spi/spi-nuc900.c:489: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/spi/spi-nuc900.c:489: warning: function declaration isn't a prototype
drivers/spi/spi-nuc900.c:490: error: expected declaration specifiers or '...' before string constant
drivers/spi/spi-nuc900.c:490: warning: data definition has no type or storage class
drivers/spi/spi-nuc900.c:490: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION'
drivers/spi/spi-nuc900.c:490: warning: function declaration isn't a prototype
drivers/spi/spi-nuc900.c:491: error: expected declaration specifiers or '...' before string constant
drivers/spi/spi-nuc900.c:491: warning: data definition has no type or storage class
drivers/spi/spi-nuc900.c:491: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'
drivers/spi/spi-nuc900.c:491: warning: function declaration isn't a prototype
drivers/spi/spi-nuc900.c:492: error: expected declaration specifiers or '...' before string constant
drivers/spi/spi-nuc900.c:492: warning: data definition has no type or storage class
drivers/spi/spi-nuc900.c:492: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS'
drivers/spi/spi-nuc900.c:492: warning: function declaration isn't a prototype
make[2]: *** [drivers/spi/spi-nuc900.o] Error 1
make[1]: *** [drivers/spi] Error 2
make: *** [drivers] Error 2
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>

Whithout including 'linux/module.h' spi-ath79 driver fails to compile
with the these errors:

drivers/spi/spi-ath79.c:273:12: error: 'THIS_MODULE' undeclared here (not in a function)
drivers/spi/spi-ath79.c:278:20: error: expected declaration specifiers or '...' before string constant
drivers/spi/spi-ath79.c:278:1: warning: data definition has no type or storage class
drivers/spi/spi-ath79.c:278:1: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION'
drivers/spi/spi-ath79.c:278:20: warning: function declaration isn't a prototype
drivers/spi/spi-ath79.c:279:15: error: expected declaration specifiers or '...' before string constant
drivers/spi/spi-ath79.c:279:1: warning: data definition has no type or storage class
drivers/spi/spi-ath79.c:279:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
drivers/spi/spi-ath79.c:279:15: warning: function declaration isn't a prototype
drivers/spi/spi-ath79.c:280:16: error: expected declaration specifiers or '...' before string constant
drivers/spi/spi-ath79.c:280:1: warning: data definition has no type or storage class
drivers/spi/spi-ath79.c:280:1: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'
drivers/spi/spi-ath79.c:280:16: warning: function declaration isn't a prototype
drivers/spi/spi-ath79.c:281:14: error: expected declaration specifiers or '...' before string constant
drivers/spi/spi-ath79.c:281:1: warning: data definition has no type or storage class
drivers/spi/spi-ath79.c:281:1: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS'
drivers/spi/spi-ath79.c:281:14: warning: function declaration isn't a prototype
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>

PPC32/64 defines NO_IRQ to zero, so no problems expected.
ARM defines NO_IRQ to -1, but OF code relies on IRQ domains support,
which returns correct ('0') value in 'no irq' case. So everything
should be fine.

Other arches might break if some of their OF drivers rely on NO_IRQ
being not 0. If so, the drivers must be fixed, finally.

[ Rob Herring points out that microblaze should be fixed, and has posted
  a patch for testing for that.   - Linus ]
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.

The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The recursion loop goes retire_requests->unbind->gpu_idle->retire_reqeusts.

Every time we go through this we need a
- active object that can be retired
- and there are no other references to that object than the one from
  the active list, so that it gets unbound and freed immediately.
Otherwise the recursion stops. So the recursion is only limited by the
number of objects that fit these requirements sitting in the active list
any time retire_request is called.

Issue exercised by tests/gem_unref_active_buffers from i-g-t.

There's been a decent bikeshed discussion whether it wouldn't be
better to pass around a flag, but imo this is o.k. for such a limited
case that only supports a w/a.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42180Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NChris Wilson <chris@chris-wilson>
[ickle- we built better bikesheds, but this keeps the rain off for now]
Tested-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Seems like something got mis-merged here.

Noticed by kallisti5 on IRC.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The clock_getres() function must return the resolution in the timespec
argument and return 0 for success.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NJohn Stultz <john.stultz@linaro.org>
Cc: stable@kernel.org
Cc: Richard Cochran <richard.cochran@omicron.at>

Fix the following compile warning with hex2bin() usage:

drivers/target/iscsi/iscsi_target_auth.c: In function ‘chap_string_to_hex’:
drivers/target/iscsi/iscsi_target_auth.c:35: warning: ignoring return value of ‘hex2bin’, declared with attribute warn_unused_result
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

If an attribute is present (but not yet supported) it should be OK
to write 0 (a no-op) to the attribute.

This is an issue because userspace should be able to save and restore all
set attribute values without error.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

So the code assumes that the sg list is only a array while in reality
loopback SGL memory via scsi_cmnd into target-core may be already
chained.  This patch converts ramdisk code to use sg_miter logic from
scatterlist.h in order to properly support passthrough SGL usage with
transport_generic_map_mem_to_cmd() via loopback.

With this patch the bug goes away. However after umount/mount of the
device my files are gone. So something is still not right. After looking
at it for a while I decided to rewrite the that part of the code and now
things do work for me.

For reference:
- http://article.gmane.org/gmane.linux.scsi.target.devel/595
  the sg_next() conversion
- http://article.gmane.org/gmane.linux.scsi.target.devel/602
  the rewrite of the copy code

(nab: Fix compile warning in rd_MEMCPY)
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Breakout rd_MEMCPY_do_task() usage of do_div() to tmp value during
rd_request->rd_page assignment.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch changes fileio to use for_each_sg() when walking se_task->task_sg
memory passed into from loopback LLD struct scsi_cmnd scatterlist memory.

This addresses an issue where FILEIO backends with loopback where hitting the
following OOPs with mkfs.ext2:

|kernel BUG at include/linux/scatterlist.h:97!
|invalid opcode: 0000 [#1] PREEMPT SMP
|Modules linked in: sd_mod tcm_loop target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs scsi_mod
|
|Pid: 671, comm: LIO_fileio Not tainted 3.1.0-rc10+ #139 Bochs Bochs
|EIP: 0060:[<e0afd746>] EFLAGS: 00010202 CPU: 0
|EIP is at fd_do_task+0x396/0x420 [target_core_file]
| [<e0aa7884>] __transport_execute_tasks+0xd4/0x190 [target_core_mod]
| [<e0aa797c>] transport_execute_tasks+0x3c/0xf0 [target_core_mod]
|EIP: [<e0afd746>] fd_do_task+0x396/0x420 [target_core_file] SS:ESP 0068:dea47e90
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Some are never used, some are set but never read, dev_hoq_count is
incremented and decremented, but never read.
Signed-off-by: NJoern Engel <joern@logfs.org>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The LSB of the page length is at offset 3, not 2.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Cc: stable@kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

SBC-3 says:

    A TRANSFER LENGTH field set to zero specifies that 256 logical
    blocks shall be written.  Any other value specifies the number
    of logical blocks that shall be written.

The old code was always just returning the value in the TRANSFER LENGTH
byte.  Fix this to return 256 if the byte is 0.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Cc: stable@kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

IO commands with a TRANSFER LENGTH of 0 are not an error; for example,
for READ (10) and WRITE (10), SBC-3 says:

    A TRANSFER LENGTH field set to zero specifies that no logical blocks
    shall be read. This condition shall not be considered an error.

In case we have nothing to do, just complete the command with good status.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Cc: stable@kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch sets the missing ISCSI_FLAG_CMD_FINAL bit in
iscsit_send_task_mgt_rsp() for a struct iscsi_tm_rsp PDU.

This usage is hardcoded for all TM response PDUs in RFC-3720
section 10.6.
Reported-by: Nwhucecil <whucecil1999@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch fixes iscsi-target handling of underflow where residual data is
causing an OOPs by using the incorrect iscsi_cmd_t->data_length initially
assigned in iscsit_allocate_se_cmd().  It resets iscsi_cmd_t->data_length
from se_cmd_t->data_length after transport_generic_allocate_tasks()
has been invoked in iscsit_handle_scsi_cmd() RX context, and converts
iscsi_cmd->residual_count usage to access iscsi_cmd->se_cmd.residual_count
to get the proper residual count set by target-core.

Reported-by: <lists@internyc.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch changes transport_generic_map_mem_to_cmd() to reject SCSI data
overflow and to send exception status with CHECK_CONDITION + TCM_INVALID_CDB_FIELD
for fabrics that are passing a pre-populated struct scatterlist (eg: tcm_loop
and iscsi-target) being mapped into se_cmd->t_data_sg and se_cmd->t_data_nents.

This addresses an OOPs where transport_allocate_data_tasks() would walk
the incorrect post OVERFLOW cmd->data_length value beyond the end of
the passed scatterlist.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

And use a SCF_BIDI flag instead.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>