Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

On Tegra186 systems with certain firmware revisions, leaving the GPU in
reset can cause a hang. To prevent this, don't leave the GPU in reset.
Signed-off-by: NMikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

On Tegra186, powergating is handled by the BPMP power domain provider
and the "legacy" powergating API is not available. Therefore skip
these calls if we are attached to a power domain.
Signed-off-by: NMikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Finally, everything should be in place to handle this.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This shouldn't have been needed ever since we started executing the
DisableLT script when shutting down heads.

Testing of the board this was originally written for seems to agree.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Training/Untraining will be hooked up to the routing logic, which
doesn't allow us to pass in a data rate.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

These exist to give NVKM information on the set of display paths that
the DD needs to be active at any given time.

Previously, the supervisor attempted to determine this solely from OR
state, but there's a few configurations where this information on its
own isn't enough to determine the specific display paths in question:

- ANX9805, where the PIOR protocol for both DP and TMDS is TMDS.
- On a device using DCB Switched Outputs.
- On GM20x and newer, with a crossbar between the SOR and macro links.

After this commit, the DD tells NVKM *exactly* which display path it's
attempting a modeset on.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

All of the necessary hw-specific logic is now handled at the output
resource level, so all of this can go away.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Also removes the user-facing methods to these controls, as they're not
currently utilised by the DD anyway.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This data will be used by essentially every part of the supervisor
handling process.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This essentially (unless the link becomes unstable and needs to be
re-trained) gives us a single entry-point to link training, during
supervisor handling, where we can ensure all routing is up to date.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

An upcoming commit will limit link training to only when the sink is
meant to be displaying an image.

We still need IRQs enabled even when the link isn't trained (for MST
messages), but don't want to train the link unnecessarily.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The aim here is to protect the OR against locking up when something
unexpected happens (such as the display disappearing during modeset,
or the DD misbehaving).
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Saves some trips across the aux channel.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This struct doesn't hold link configuration data anymore, so we can
limit its use to internal DP training (anx9805 handles training for
external DP).
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We care about this information outside of link training.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This hasn't been used since atomic.

We may want to re-implement "fast" DPMS at some point, but for now,
this just gets in the way.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This essentially replicates our current behaviour in a way that's
compatible with the new model that's emerging, so that we're able
to start porting the hw-specific functions to it.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Upcoming commits make supervisor handling share code between the NV50
and GF119 implementations.  Because of this, and a few other cleanups,
we need to allow some additional customisation.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

In order to properly support the SOR -> SOR + pad macro separation
that occurred with GM20x GPUs, we need to separate OR handling out
of the output path code.

This will be used as the base to support ORs (DAC, SOR, PIOR).
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Primarily intended as a way to pass per-head state around during
supervisor handling, and share logic between NV50/GF119.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This is to allow hw-specific code to instantiate output resources first,
so we can cull unsupported output paths based on them.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>