- 15 7月, 2016 14 次提交
-
-
由 Florian Meier 提交于
Link: http://lkml.kernel.org/r/20160701130914.GA23225@styxhpSigned-off-by: NFlorian Meier <Florian.Meier@informatik.uni-erlangen.de> Reviewed-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com> Tested-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
early_page_uninitialised looks up an arbitrary PFN. While a machine without node 0 will boot with "mm, page_alloc: Always return a valid node from early_pfn_to_nid", it works because it assumes that nodes are always in PFN order. This is not guaranteed so this patch adds robustness by always checking if the node being checked is online. Link: http://lkml.kernel.org/r/1468008031-3848-4-git-send-email-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
early_pfn_to_nid can return node 0 if a PFN is invalid on machines that has no node 0. A machine with only node 1 was observed to crash with the following message: BUG: unable to handle kernel paging request at 000000000002a3c8 PGD 0 Modules linked in: Hardware name: Supermicro H8DSP-8/H8DSP-8, BIOS 080011 06/30/2006 task: ffffffff81c0d500 ti: ffffffff81c00000 task.ti: ffffffff81c00000 RIP: reserve_bootmem_region+0x6a/0xef CR2: 000000000002a3c8 CR3: 0000000001c06000 CR4: 00000000000006b0 Call Trace: free_all_bootmem+0x4b/0x12a mem_init+0x70/0xa3 start_kernel+0x25b/0x49b The problem is that early_page_uninitialised uses the early_pfn_to_nid helper which returns node 0 for invalid PFNs. No caller of early_pfn_to_nid cares except early_page_uninitialised. This patch has early_pfn_to_nid always return a valid node. Link: http://lkml.kernel.org/r/1468008031-3848-3-git-send-email-mgorman@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
There are two bugs on qlist_move_cache(). One is that qlist's tail isn't set properly. curr->next can be NULL since it is singly linked list and NULL value on tail is invalid if there is one item on qlist. Another one is that if cache is matched, qlist_put() is called and it will set curr->next to NULL. It would cause to stop the loop prematurely. These problems come from complicated implementation so I'd like to re-implement it completely. Implementation in this patch is really simple. Iterate all qlist_nodes and put them to appropriate list. Unfortunately, I got this bug sometime ago and lose oops message. But, the bug looks trivial and no need to attach oops. Fixes: 55834c59 ("mm: kasan: initial memory quarantine implementation") Link: http://lkml.kernel.org/r/1467766348-22419-1-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: NDmitry Vyukov <dvyukov@google.com> Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: NAlexander Potapenko <glider@google.com> Cc: Kuthonuzo Luruo <poll.stdin@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mauro Carvalho Chehab 提交于
This header contains the userspace API for lirc. This is a fixup for commit b7be7557 ("[media] bz#75751: Move internal header file lirc.h to uapi/"). It moved the header to the right place, but it forgot to add it at Kbuild. So, despite being at uapi, it is not copied to the right place. Fixes: b7be7557 ("[media] bz#75751: Move internal header file lirc.h to uapi/") Link: http://lkml.kernel.org/r/320c765d32bfc82c582e336d52ffe1026c73c644.1468439021.git.mchehab@s-opensource.comSigned-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Alec Leamas <leamas.alec@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Ying 提交于
madvise_free_huge_pmd should return 0 if the fallback PTE operations are required. In madvise_free_huge_pmd, if part pages of THP are discarded, the THP will be split and fallback PTE operations should be used if splitting succeeds. But the original code will make fallback PTE operations skipped, after splitting succeeds. Fix that via make madvise_free_huge_pmd return 0 after splitting successfully, so that the fallback PTE operations will be done. Link: http://lkml.kernel.org/r/1467135452-16688-1-git-send-email-ying.huang@intel.comSigned-off-by: N"Huang, Ying" <ying.huang@intel.com> Acked-by: NMinchan Kim <minchan@kernel.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kieran Bingham 提交于
This reverts commit 9b558035 ("scripts/gdb: add documentation example for radix tree") The python implementation of radix tree was merged at the same time as a refactoring of the radix tree implementation and doesn't work. The feature is being reverted, thus we revert the documentation as well. Link: http://lkml.kernel.org/r/1467127337-11135-7-git-send-email-kieran@bingham.xyzSigned-off-by: NKieran Bingham <kieran@bingham.xyz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kieran Bingham 提交于
This reverts commit e127a73d ("scripts/gdb: add a Radix Tree Parser") The python implementation of radix-tree was merged at the same time as the radix-tree system was heavily reworked from commit e9256efc ("radix-tree: introduce radix_tree_empty") to 3bcadd6f ("radix-tree: free up the bottom bit of exceptional entries for reuse") and no longer functions, but also prevents other gdb scripts from loading. This functionality has not yet hit a release, so simply remove it for now Link: http://lkml.kernel.org/r/1467127337-11135-6-git-send-email-kieran@bingham.xyzSigned-off-by: NKieran Bingham <kieran@bingham.xyz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nikolay Borisov 提交于
Python doesn't do automatic expansion of paths. In case one passes path of the from ~/foo/bar the gdb scripts won't automatically expand that and as a result the symbols files won't be loaded. Fix this by explicitly expanding all paths which begin with "~" Link: http://lkml.kernel.org/r/1467127337-11135-5-git-send-email-kieran@bingham.xyzSigned-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: NKieran Bingham <kieran@bingham.xyz> Reviewed-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Omar Sandoval 提交于
Since scripts/gdb/linux/constants.py is autogenerated, this should have been added to .gitignore when it was introduced. Fixes: f197d75f ("scripts/gdb: provide linux constants") Link: http://lkml.kernel.org/r/1467127337-11135-4-git-send-email-kieran@bingham.xyzSigned-off-by: NOmar Sandoval <osandov@fb.com> Signed-off-by: NKieran Bingham <kieran@bingham.xyz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kieran Bingham 提交于
The autogenerated constants.py file was only being built on the initial call, and if the constants.py.in file changed. As we are utilising the CPP hooks, we can successfully use the call if_changed_dep rules to determine when to rebuild the file based on it's inclusions. Link: http://lkml.kernel.org/r/1467127337-11135-3-git-send-email-kieran@bingham.xyzSigned-off-by: NKieran Bingham <kieran@bingham.xyz> Reported-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kieran Bingham 提交于
The constants.py generation, involves a rule to link into the main makefile. This rule has no command and generates a spurious warning message in the build logs when CONFIG_SCRIPTS_GDB is enabled. Fix simply by giving a no-op action Link: http://lkml.kernel.org/r/1467127337-11135-2-git-send-email-kieran@bingham.xyzSigned-off-by: NKieran Bingham <kieran@bingham.xyz> Reported-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dmitry Vyukov 提交于
Currently GPF messages with KASAN look as follows: kasan: GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Add newlines. Link: http://lkml.kernel.org/r/1467294357-98002-1-git-send-email-dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com> Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
It's possible to isolate some freepages in a pageblock and then fail split_free_page() due to the low watermark check. In this case, we hit VM_BUG_ON() because the freeing scanner terminated early without a contended lock or enough freepages. This should never have been a VM_BUG_ON() since it's not a fatal condition. It should have been a VM_WARN_ON() at best, or even handled gracefully. Regardless, we need to terminate anytime the full pageblock scan was not done. The logic belongs in isolate_freepages_block(), so handle its state gracefully by terminating the pageblock loop and making a note to restart at the same pageblock next time since it was not possible to complete the scan this time. [rientjes@google.com: don't rescan pages in a pageblock] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1607111244150.83138@chino.kir.corp.google.com Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1606291436300.145590@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com> Reported-by: NMinchan Kim <minchan@kernel.org> Tested-by: NMinchan Kim <minchan@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 7月, 2016 3 次提交
-
-
由 Linus Torvalds 提交于
Merge branches 'perf-urgent-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf and timer fixes from Ingo Molnar: "A fix for a posix CPU timers bug, and a perf printk message fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix bogus kernel printk, again * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix_cpu_timer: Exit early when process has been reaped
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "This contains three commits to fix memory corruption bugs with certain Apple AirPort cards, plus a fix for a X86_BUG() ID definitions collision bug in asm/cpufeatures.h" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/quirks: Add early quirk to reset Apple AirPort card x86/quirks: Reintroduce scanning of secondary buses x86/quirks: Apply nvidia_bugs quirk only on root bus x86/cpu: Fix duplicated X86_BUG(9) macro
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull core fixes from Ingo Molnar: "Fix an objtool false positive plus an UP kernel memory corruption bug on certain configs" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Keep enough storage space if SMP=n to avoid array out of bounds scribble objtool: Fix STACK_FRAME_NON_STANDARD macro checking for function symbols
-
- 13 7月, 2016 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "Two regression fixes: - a regression when handling VIDIOC_CROPCAP at the media core; - a regression at adv7604 that was ignoring pad number in subdev ops" * tag 'media/v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] adv7604: Don't ignore pad number in subdev DV timings pad operations [media] v4l2-ioctl: fix stupid mistake in cropcap condition
-
由 Thomas Gleixner 提交于
Xiaolong Ye reported lock debug warnings triggered by the following commit: 8de4a0066106 ("perf/x86: Convert the core to the hotplug state machine") The bug is the following: the cpuhp_bp_states[] array is cut short when CONFIG_SMP=n, but the dynamically registered callbacks are stored nevertheless and happily scribble outside of the array bounds... We need to store them in case that the state is unregistered so we can invoke the teardown function. That's independent of CONFIG_SMP. Make sure the array is large enough. Reported-by: Nkernel test robot <xiaolong.ye@intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Adam Borowski <kilobyte@angband.pl> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: lkp@01.org Cc: stable@vger.kernel.org Cc: tipbuild@zytor.com Fixes: cff7d378 "cpu/hotplug: Convert to a state machine for the control processor" Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1607122144560.4083@nanosSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fixes from Rafael Wysocki: "One ACPI EC driver regression fix (code ordering) and three reverts of ACPICA commits, one that introduced a problem and two unsuccessful attempted fixes on top of it. Specifics: - Fix a recent regression in the ACPI EC driver introduced by a fix of another problem that uncovered a latent code ordering issue in the driver (Lv Zheng). - Revert a recent ACPICA commit that attempted to address a lock ordering issue introduced by a previous fix, but caused Dell Precision 5510 to fail to boot, revert that previous fix too and finally revert the commit that caused the original problem (a deadlock in the ACPICA code) to happen (Rafael Wysocki)" * tag 'acpi-urgent-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis" Revert "ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading" Revert "ACPICA: Namespace: Fix namespace/interpreter lock ordering" ACPI / EC: Fix code ordering issue in ec_remove_handlers()
-
由 Rafael J. Wysocki 提交于
* acpica-fixes: Revert "ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis" Revert "ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading" Revert "ACPICA: Namespace: Fix namespace/interpreter lock ordering" * acpi-ec-fixes: ACPI / EC: Fix code ordering issue in ec_remove_handlers()
-
由 Linus Torvalds 提交于
Merge tag 'qcom-smd-list-voltage' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "Fix qcom-smd list voltage issues for msm8974 This commit looks like a cleanup but in fact by causing the core to go down some simplified code paths for noop regulators it avoids a boot time crash for msm8974 platforms which was introduced in v4.7. It has been in -next for a while, the issues in mainline for these platforms weren't flagged up to me until yesterday (I think it took some time to figure out what was going wrong)" * tag 'qcom-smd-list-voltage' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom_smd: Remove list_voltage callback for rpm_smps_ldo_ops_fixed
-
- 12 7月, 2016 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: posix_acl: de-union a_refcount and a_rcu nfs_atomic_open(): prevent parallel nfs_lookup() on a negative hashed Use the right predicate in ->atomic_open() instances
-
由 Jeff Layton 提交于
Currently the two are unioned together, but I don't think that's safe. It looks like get_cached_acl could race with the last put in posix_acl_release. get_cached_acl calls atomic_inc_not_zero on a_refcount, but that field could have already been clobbered by call_rcu, and may no longer be zero. Fix this by de-unioning the two fields. Fixes: b8a7a3a6 (posix_acl: Inode acl caching fixes) Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 11 7月, 2016 11 次提交
-
-
由 Alexey Dobriyan 提交于
Variable "now" seems to be genuinely used unintialized if branch if (CPUCLOCK_PERTHREAD(timer->it_clock)) { is not taken and branch if (unlikely(sighand == NULL)) { is taken. In this case the process has been reaped and the timer is marked as disarmed anyway. So none of the postprocessing of the sample is required. Return right away. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160707223911.GA26483@p183.telecom.bySigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Rafael J. Wysocki 提交于
Revert "ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis" Revert commit 3d4b7ae9 (ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis) that enabled the execution of module-level AML after loading each table (rather than after all AML tables have been loaded), but overlooked locking issues resulting from that change. Fixes: 3d4b7ae9 (ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis) Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Rafael J. Wysocki 提交于
Revert commit 2f38b1b1 (ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading) that attempted to fix a deadlock issue introduced by a previous commit, but it led to a lock ordering inconsistency that caused further problems to appear. Fixes: 2f38b1b1 (ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading) Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Rafael J. Wysocki 提交于
Revert commit 45209046 (ACPICA: Namespace: Fix namespace/interpreter lock ordering) that renders Dell Precision 5510 with the latest (1.2.10) BIOS applied unable to boot. Fixes: 45209046 (ACPICA: Namespace: Fix namespace/interpreter lock ordering) Link: https://bugzilla.kernel.org/show_bug.cgi?id=121701Reported-by: NGreg White <gwhite@kupulau.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Linus Torvalds 提交于
-
由 Hugh Dickins 提交于
The well-spotted fallocate undo fix is good in most cases, but not when fallocate failed on the very first page. index 0 then passes lend -1 to shmem_undo_range(), and that has two bad effects: (a) that it will undo every fallocation throughout the file, unrestricted by the current range; but more importantly (b) it can cause the undo to hang, because lend -1 is treated as truncation, which makes it keep on retrying until every page has gone, but those already fully instantiated will never go away. Big thank you to xfstests generic/269 which demonstrates this. Fixes: b9b4bb26 ("tmpfs: don't undo fallocate past its last page") Cc: stable@vger.kernel.org Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lukas Wunner 提交于
The EFI firmware on Macs contains a full-fledged network stack for downloading OS X images from osrecovery.apple.com. Unfortunately on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331 wireless card on every boot and leaves it enabled even after ExitBootServices has been called. The card continues to assert its IRQ line, causing spurious interrupts if the IRQ is shared. It also corrupts memory by DMAing received packets, allowing for remote code execution over the air. This only stops when a driver is loaded for the wireless card, which may be never if the driver is not installed or blacklisted. The issue seems to be constrained to the Broadcom 4331. Chris Milsted has verified that the newer Broadcom 4360 built into the MacBookPro11,3 (2013/2014) does not exhibit this behaviour. The chances that Apple will ever supply a firmware fix for the older machines appear to be zero. The solution is to reset the card on boot by writing to a reset bit in its mmio space. This must be done as an early quirk and not as a plain vanilla PCI quirk to successfully combat memory corruption by DMAed packets: Matthew Garrett found out in 2012 that the packets are written to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html). This type of memory is made available to the page allocator by efi_free_boot_services(). Plain vanilla PCI quirks run much later, in subsys initcall level. In-between a time window would be open for memory corruption. Random crashes occurring in this time window and attributed to DMAed packets have indeed been observed in the wild by Chris Bainbridge. When Matthew Garrett analyzed the memory corruption issue in 2012, he sought to fix it with a grub quirk which transitions the card to D3hot: http://git.savannah.gnu.org/cgit/grub.git/commit/?id=9d34bb85da56 This approach does not help users with other bootloaders and while it may prevent DMAed packets, it does not cure the spurious interrupts emanating from the card. Unfortunately the card's mmio space is inaccessible in D3hot, so to reset it, we have to undo the effect of Matthew's grub patch and transition the card back to D0. Note that the quirk takes a few shortcuts to reduce the amount of code: The size of BAR 0 and the location of the PM capability is identical on all affected machines and therefore hardcoded. Only the address of BAR 0 differs between models. Also, it is assumed that the BCMA core currently mapped is the 802.11 core. The EFI driver seems to always take care of this. Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback towards finding the best solution to this problem. The following should be a comprehensive list of affected models: iMac13,1 2012 21.5" [Root Port 00:1c.3 = 8086:1e16] iMac13,2 2012 27" [Root Port 00:1c.3 = 8086:1e16] Macmini5,1 2011 i5 2.3 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,2 2011 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,3 2011 i7 2.0 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini6,1 2012 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1e12] Macmini6,2 2012 i7 2.3 GHz [Root Port 00:1c.1 = 8086:1e12] MacBookPro8,1 2011 13" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,2 2011 15" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,3 2011 17" [Root Port 00:1c.1 = 8086:1c12] MacBookPro9,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro9,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] For posterity, spurious interrupts caused by the Broadcom 4331 wireless card resulted in splats like this (stacktrace omitted): irq 17: nobody cared (try booting with the "irqpoll" option) handlers: [<ffffffff81374370>] pcie_isr [<ffffffffc0704550>] sdhci_irq [sdhci] threaded [<ffffffffc07013c0>] sdhci_thread_irq [sdhci] [<ffffffffc0a0b960>] azx_interrupt [snd_hda_codec] Disabling IRQ #17 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1098621 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632#c5 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1279130 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1332732 Tested-by: Konstantin Simanov <k.simanov@stlk.ru> # [MacBookPro8,1] Tested-by: Lukas Wunner <lukas@wunner.de> # [MacBookPro9,1] Tested-by: Bryan Paradis <bryan.paradis@gmail.com> # [MacBookPro9,2] Tested-by: Andrew Worsley <amworsley@gmail.com> # [MacBookPro10,1] Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> # [MacBookPro10,2] Signed-off-by: NLukas Wunner <lukas@wunner.de> Acked-by: NRafał Miłecki <zajec5@gmail.com> Acked-by: NMatt Fleming <matt@codeblueprint.co.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chris Milsted <cmilsted@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Michael Buesch <m@bues.ch> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: b43-dev@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: stable@vger.kernel.org Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Apply nvidia_bugs quirk only on root bus Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Reintroduce scanning of secondary buses Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de [ Did minor readability edits. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Lukas Wunner 提交于
We used to scan secondary buses until the following commit that was applied in 2009: 8659c406 ("x86: only scan the root bus in early PCI quirks") which commit constrained early quirks to the root bus only. Its motivation was to prevent application of the nvidia_bugs quirk on secondary buses. We're about to add a quirk to reset the Broadcom 4331 wireless card on 2011/2012 Macs, which is located on a secondary bus behind a PCIe root port. To facilitate that, reintroduce scanning of secondary buses. The commit message of 8659c406 notes that scanning only the root bus "saves quite some unnecessary scanning work". The algorithm used prior to 8659c406 was particularly time consuming because it scanned buses 0 to 31 brute force. To avoid lengthening boot time, employ a recursive strategy which only scans buses that are actually reachable from the root bus. Yinghai Lu pointed out that the secondary bus number read from a bridge's config space may be invalid, in particular a value of 0 would cause an infinite loop. The PCI core goes beyond that and recurses to a child bus only if its bus number is greater than the parent bus number (see pci_scan_bridge()). Since the root bus is numbered 0, this implies that secondary buses may not be 0. Do the same on early scanning. If this algorithm is found to significantly impact boot time or cause infinite loops on broken hardware, it would be possible to limit its recursion depth: The Broadcom 4331 quirk applies at depth 1, all others at depth 0, so the bus need not be scanned deeper than that for now. An alternative approach would be to revert to scanning only the root bus, and apply the Broadcom 4331 quirk to the root ports 8086:1c12, 8086:1e12 and 8086:1e16. Apple always positioned the card behind either of these three ports. The quirk would then check presence of the card in slot 0 below the root port and do its deed. Signed-off-by: NLukas Wunner <lukas@wunner.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/f0daa70dac1a9b2483abdb31887173eb6ab77bdf.1465690253.git.lukas@wunner.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Lukas Wunner 提交于
Since the following commit: 8659c406 ("x86: only scan the root bus in early PCI quirks") ... early quirks are only applied to devices on the root bus. The motivation was to prevent application of the nvidia_bugs quirk on secondary buses. We're about to reintroduce scanning of secondary buses for a quirk to reset the Broadcom 4331 wireless card on 2011/2012 Macs. To prevent regressions, open code the requirement to apply nvidia_bugs only on the root bus. Signed-off-by: NLukas Wunner <lukas@wunner.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/4d5477c1d76b2f0387a780f2142bbcdd9fee869b.1465690253.git.lukas@wunner.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Vegard Nossum 提交于
This showed up as "6Failed to access..." here. Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 1b74dde7 ("x86/cpu: Convert printk(KERN_<LEVEL> ...) to pr_<level>(...)") Link: http://lkml.kernel.org/r/1468170841-17045-1-git-send-email-vegard.nossum@oracle.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fix from Ralf Baechle: "Another week with just a single 4.7 fix. This fixes a possible 'loss' of the huge page bit from pmd on permission change" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix page table corruption on THP permission changes.
-
- 10 7月, 2016 1 次提交
-
-
由 Josh Poimboeuf 提交于
Mathieu Desnoyers reported that the STACK_FRAME_NON_STANDARD macro wasn't working with the lttng_filter_interpret_bytecode() function in the lttng-modules code. Usually the relocation created by STACK_FRAME_NON_STANDARD creates a reference to a section symbol like this: Offset Type Value Addend Name 000000000000000000 X86_64_64 000000000000000000 +3136 .text But in this case it created a reference to a function symbol: Offset Type Value Addend Name 000000000000000000 X86_64_64 0x00000000000003a0 +0 lttng_filter_interpret_bytecode To be honest I have no idea what causes gcc to decide to do one over the other. But both are valid ELF, so add support for the function symbol. Reported-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: lttng-dev@lists.lttng.org Link: http://lkml.kernel.org/r/9cee42843bc6d94e990a152e4e0319cfdf6756ef.1466023450.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 09 7月, 2016 4 次提交
-
-
由 Dave Hansen 提交于
cpufeatures.h currently defines X86_BUG(9) twice on 32-bit: #define X86_BUG_NULL_SEG X86_BUG(9) /* Nulling a selector preserves the base */ ... #ifdef CONFIG_X86_32 #define X86_BUG_ESPFIX X86_BUG(9) /* "" IRET to 16-bit SS corrupts ESP/RSP high bits */ #endif I think what happened was that this added the X86_BUG_ESPFIX, but in an #ifdef below most of the bugs: 58a5aac5 x86/entry/32: Introduce and use X86_BUG_ESPFIX instead of paravirt_enabled Then this came along and added X86_BUG_NULL_SEG, but collided with the earlier one that did the bug below the main block defining all the X86_BUG()s. 7a5d6704 x86/cpu: Probe the behavior of nulling out a segment at boot time Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Acked-by: NAndy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160618001503.CEE1B141@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "Three fixes. One is the qla24xx MSI regression, one is a theoretical problem over blacklist matching, which would bite USB badly if it ever triggered and one is a system hang with a particular type of IPR device" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: qla2xxx: Fix NULL pointer deref in QLA interrupt SCSI: fix new bug in scsi_dev_info_list string matching ipr: Clear interrupt on croc/crocodile when running with LSI
-
由 Lv Zheng 提交于
There is an order issue in ec_remove_handlers() that acpi_ec_stop() is called before removing the operation region handler. That is incorrect, because the operation region handler removal triggers _REG(DISCONNECT) which may result in new EC transactions to carry out. That existing issue has been triggered by the following commit: Commit: dcf15cbd Subject: ACPI / EC: Fix a boot EC regresion by restoring boot EC which changed the driver to call ec_remove_handlers() after invoking _REG(CONNECT), so the issue has become visible. Fixes: dcf15cbd (ACPI / EC: Fix a boot EC regresion by restoring boot EC) Link: https://bugzilla.kernel.org/show_bug.cgi?id=102421Reported-and-tested-by: NWolfram Sang <wsa@the-dreams.de> Reported-by: NNicholas <nkudriavtsev@gmail.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> [ rjw: Changelog ] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Linus Torvalds 提交于
Merge tag 'ecryptfs-4.7-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs fixes from Tyler Hicks: "Provide a more concise fix for CVE-2016-1583: - Additionally fixes linux-stable regressions caused by the cherry-picking of the original fix Some very minor changes that have queued up: - Fix typos in code comments - Remove unnecessary check for NULL before destroying kmem_cache" * tag 'ecryptfs-4.7-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: ecryptfs: don't allow mmap when the lower fs doesn't support it Revert "ecryptfs: forbid opening files without mmap handler" ecryptfs: fix spelling mistakes eCryptfs: fix typos in comment ecryptfs: drop null test before destroy functions
-