- 26 10月, 2010 32 次提交
-
-
由 Dave Chinner 提交于
The number of inodes allocated does not need to be tied to the addition or removal of an inode to/from a list. If we are not tied to a list lock, we could update the counters when inodes are initialised or destroyed, but to do that we need to convert the counters to be per-cpu (i.e. independent of a lock). This means that we have the freedom to change the list/locking implementation without needing to care about the counters. Based on a patch originally from Eric Dumazet. [AV: cleaned up a bit, fixed build breakage on weird configs Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miklos Szeredi 提交于
If clone_mnt() happens while mnt_make_readonly() is running, the cloned mount might have MNT_WRITE_HOLD flag set, which results in mnt_want_write() spinning forever on this mount. Needs CAP_SYS_ADMIN to trigger deliberately and unlikely to happen accidentally. But if it does happen it can hang the machine. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Make node look as if it was on hlist, with hlist_del() working correctly. Usable without any locking... Convert a couple of places where we want to do that to inode->i_hash. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
note: for race-free uses you inode_lock held Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
We are in fill_super(); again, no inodes with zero i_count could be around until we set MS_ACTIVE. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
In fill_super() we hadn't MS_ACTIVE set yet, so there won't be any inodes with zero i_count sitting around. In put_super() we already have MS_ACTIVE removed *and* we had called invalidate_inodes() since then. So again there won't be any inodes with zero i_count... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
It's pointless - we *do* have busy inodes (root directory, for one), so that call will fail and attempt to change XIP flag will be ignored. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Namhyung Kim 提交于
If we have the appropriate page already, call __block_write_begin() directly instead of releasing and regrabbing it inside of block_write_begin(). Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Namhyung Kim 提交于
Since inode->i_mode shares its bits for S_IFMT, S_ISDIR should be used to distinguish whether it is a dir or not. Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Chris Mason 提交于
The aio batching code is using igrab to get an extra reference on the inode so it can safely batch. igrab will go ahead and take the global inode spinlock, which can be a bottleneck on large machines doing lots of AIO. In this case, igrab isn't required because we already have a reference on the file handle. It is safe to just bump the i_count directly on the inode. Benchmarking shows this patch brings IOP/s on tons of flash up by about 2.5X. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Christoph Hellwig 提交于
Updated Documentation/filesystems/Locking to match the code. Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Namhyung Kim 提交于
bh->b_private is initialized within init_buffer(), thus the assignment should be redundant. Remove it. Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Randy Dunlap 提交于
Move the EXPORTFS kconfig symbol out of the NETWORK_FILESYSTEMS block since it provides a library function that can be (and is) used by other (non-network) filesystems. This also eliminates a kconfig dependency warning: warning: (XFS_FS && BLOCK || NFSD && NETWORK_FILESYSTEMS && INET && FILE_LOCKING && BKL) selects EXPORTFS which has unmet direct dependencies (NETWORK_FILESYSTEMS) Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Alex Elder <aelder@sgi.com> Cc: xfs-masters@oss.sgi.com Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Use sync_dirty_buffer instead of the incorrect opencoding it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 KAMEZAWA Hiroyuki 提交于
Now, rw_verify_area() checsk f_pos is negative or not. And if negative, returns -EINVAL. But, some special files as /dev/(k)mem and /proc/<pid>/mem etc.. has negative offsets. And we can't do any access via read/write to the file(device). So introduce FMODE_UNSIGNED_OFFSET to allow negative file offsets. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Richard Weinberger 提交于
365b1818 ("add f_flags to struct statfs(64)") resized f_spare within struct statfs which caused a UML crash. There is no need to copy f_spare. Signed-off-by: NRichard Weinberger <richard@nod.at> Reported-by: NToralf Förster <toralf.foerster@gmx.de> Tested-by: NToralf Förster <toralf.foerster@gmx.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Valerie Aurora 提交于
Documentation: Fix trivial typo in filesystems/sharedsubtree.txt This typo is easy to ignore unless you have spent a great deal of time thinking about how to eliminate duplicate dentries in unions. Signed-off-by: NValerie Aurora <vaurora@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dan Carpenter 提交于
The intent was to verify that bh = affs_bread_ino(...) returned a valid pointer. We checked "ext_bh" earlier in the function and it's valid here. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Eric Dumazet 提交于
Andrew, Could you please review this patch, you probably are the right guy to take it, because it crosses fs and net trees. Note : /proc/sys/fs/file-nr is a read-only file, so this patch doesnt depend on previous patch (sysctl: fix min/max handling in __do_proc_doulongvec_minmax()) Thanks ! [PATCH V4] fs: allow for more than 2^31 files Robin Holt tried to boot a 16TB system and found af_unix was overflowing a 32bit value : <quote> We were seeing a failure which prevented boot. The kernel was incapable of creating either a named pipe or unix domain socket. This comes down to a common kernel function called unix_create1() which does: atomic_inc(&unix_nr_socks); if (atomic_read(&unix_nr_socks) > 2 * get_max_files()) goto out; The function get_max_files() is a simple return of files_stat.max_files. files_stat.max_files is a signed integer and is computed in fs/file_table.c's files_init(). n = (mempages * (PAGE_SIZE / 1024)) / 10; files_stat.max_files = n; In our case, mempages (total_ram_pages) is approx 3,758,096,384 (0xe0000000). That leaves max_files at approximately 1,503,238,553. This causes 2 * get_max_files() to integer overflow. </quote> Fix is to let /proc/sys/fs/file-nr & /proc/sys/fs/file-max use long integers, and change af_unix to use an atomic_long_t instead of atomic_t. get_max_files() is changed to return an unsigned long. get_nr_files() is changed to return a long. unix_nr_socks is changed from atomic_t to atomic_long_t, while not strictly needed to address Robin problem. Before patch (on a 64bit kernel) : # echo 2147483648 >/proc/sys/fs/file-max # cat /proc/sys/fs/file-max -18446744071562067968 After patch: # echo 2147483648 >/proc/sys/fs/file-max # cat /proc/sys/fs/file-max 2147483648 # cat /proc/sys/fs/file-nr 704 0 2147483648 Reported-by: NRobin Holt <holt@sgi.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NDavid Miller <davem@davemloft.net> Reviewed-by: NRobin Holt <holt@sgi.com> Tested-by: NRobin Holt <holt@sgi.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jan Kara 提交于
Currently isofs_get_blocks() was limited to handle only 4TB files on 32-bit architectures because of unnecessary use of iblock variable which was signed long. Just remove the variable. The error messages that were using this variable should have rather used b_off anyway because that is the block we are currently mapping. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
__block_write_begin and block_prepare_write are identical except for slightly different calling conventions. Convert all callers to the __block_write_begin calling conventions and drop block_prepare_write. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Hugetlbfs used to need it, but after the destroy_inode and evict_inode changes it's not required anymore. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Add a new helper to write out the inode using the writeback code, that is including the correct dirty bit and list manipulation. A few of filesystems already opencode this, and a lot of others should be using it instead of using write_inode_now which also writes out the data. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
The caller that didn't need it is gone. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Linus Torvalds 提交于
Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (50 commits) davinci: fix remaining board support after io_pgoffst removal davinci: mityomapl138: make file local data static arm/davinci: remove duplicated include davinci: Initial support for Omapl138-Hawkboard davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom davinci: add tnetv107x touchscreen platform device input: add driver for tnetv107x touchscreen controller davinci: add keypad config for tnetv107x evm board davinci: add tnetv107x keypad platform device input: add driver for tnetv107x on-chip keypad controller net: davinci_emac: cleanup unused cpdma code net: davinci_emac: switch to new cpdma layer net: davinci_emac: separate out cpdma code net: davinci_emac: cleanup unused mdio emac code omap: cleanup unused davinci mdio arch code davinci: cleanup mdio arch code and switch to phy_id net: davinci_emac: switch to new mdio omap: add mdio platform devices davinci: add mdio platform devices net: davinci_emac: separate out davinci mdio ... Fix up trivial conflict in drivers/input/keyboard/Kconfig (two entries added next to each other - one from the davinci merge, one from the input merge)
-
git://git.open-osd.org/linux-open-osd由 Linus Torvalds 提交于
* 'for-linus' of git://git.open-osd.org/linux-open-osd: exofs: Remove inode->i_count manipulation in exofs_new_inode fs/exofs: typo fix of faild to failed exofs: Set i_mapping->backing_dev_info anyway exofs: Cleaup read path in regard with read_for_write
-
由 Borislav Petkov 提交于
Commit b40827fa ("x86-32, mm: Add an initial page table for core bootstrapping") added an include directive which is needless and is taken care of by a previous one. Remove it. Caught-by: NJaswinder Singh Rajput <jaswinderlinux@gmail.com> Signed-off-by: NBorislav Petkov <bp@alien8.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Boaz Harrosh 提交于
exofs_new_inode() was incrementing the inode->i_count and decrementing it in create_done(), in a bad attempt to make sure the inode will still be there when the asynchronous create_done() finally arrives. This was very stupid because iput() was not called, and if it was actually needed, it would leak the inode. However all this is not needed, because at exofs_evict_inode() we already wait for create_done() by waiting for the object_created event. Therefore remove the superfluous ref counting and just Thicken the comment at exofs_evict_inode() a bit. While at it change places that open coded wait_obj_created() to call the already available wrapper. CC: Dave Chinner <dchinner@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Nick Piggin <npiggin@kernel.dk> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
- 25 10月, 2010 8 次提交
-
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (48 commits) [S390] topology: export cpu topology via proc/sysinfo [S390] topology: move topology sysinfo code [S390] topology: clean up facility detection [S390] cleanup facility list handling [S390] enable ARCH_DMA_ADDR_T_64BIT with 64BIT [S390] dasd: ignore unsolicited interrupts for DIAG [S390] kvm: Enable z196 instruction facilities [S390] dasd: fix unsolicited interrupt recognition [S390] dasd: fix use after free in dbf [S390] kvm: Fix badness at include/asm/mmu_context.h:83 [S390] cio: fix I/O cancel function [S390] topology: change default [S390] smp: use correct cpu address in print_cpu_info() [S390] remove ieee_instruction_pointer from thread_struct [S390] cleanup system call parameter setup [S390] correct alignment of cpuid structure [S390] cleanup lowcore access from external interrupts [S390] cleanup lowcore access from program checks [S390] pgtable: move pte_mkhuge() from hugetlb.h to pgtable.h [S390] fix SIGBUS handling ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits) ALSA: hda - Disable sticky PCM stream assignment for AD codecs ALSA: usb - Creative USB X-Fi volume knob support ALSA: ca0106: Use card specific dac id for mute controls. ALSA: ca0106: Allow different sound cards to use different SPI channel mappings. ALSA: ca0106: Create a nice spot for mapping channels to dacs. ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence. ALSA: ca0106: Pull out dac powering routine into separate function. ALSA: ca0106 - add Sound Blaster 5.1vx info. ASoC: tlv320dac33: Use usleep_range for delays ALSA: usb-audio: add Novation Launchpad support ALSA: hda - Add workarounds for CT-IBG controllers ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs ASoC: tpa6130a2: Error handling for broken chip ASoC: max98088: Staticise m98088_eq_band ASoC: soc-core: Fix codec->name memory leak ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066 ALSA: hda - Add some workarounds for Creative IBG ALSA: hda - Fix wrong SPDIF NID assignment for CA0110 ALSA: hda - Fix codec rename rules for ALC662-compatible codecs ALSA: hda - Add alc_init_jacks() call to other codecs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb由 Linus Torvalds 提交于
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: Orphan the UWB and WUSB subsystems uwb: Remove the WLP subsystem and drivers
-
由 Linus Torvalds 提交于
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (44 commits) eeepc-wmi: Add cpufv sysfs interface eeepc-wmi: add additional hotkeys panasonic-laptop: Simplify calls to acpi_pcc_retrieve_biosdata panasonic-laptop: Handle errors properly if they happen intel_pmic_gpio: fix off-by-one value range checking IBM Real-Time "SMI Free" mode driver -v7 Add OLPC XO-1 rfkill driver Move hdaps driver to platform/x86 ideapad-laptop: Fix Makefile intel_pmic_gpio: swap the bits and mask args for intel_scu_ipc_update_register ideapad: Add param: no_bt_rfkill ideapad: Change the driver name to ideapad-laptop ideapad: rewrite the sw rfkill set ideapad: rewrite the hw rfkill notify ideapad: use EC command to control camera ideapad: use return value of _CFG to tell if device exist or not ideapad: make sure we bind on the correct device ideapad: check VPC bit before sync rfkill hw status ideapad: add ACPI helpers dell-laptop: Add debugfs support ...
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mtd/m25p80: add support to parse the partitions by OF node of/irq: of_irq.c needs to include linux/irq.h of/mips: Cleanup some include directives/files. of/mips: Add device tree support to MIPS of/flattree: Eliminate need to provide early_init_dt_scan_chosen_arch of/device: Rework to use common platform_device_alloc() for allocating devices of/xsysace: Fix OF probing on little-endian systems of: use __be32 types for big-endian device tree data of/irq: remove references to NO_IRQ in drivers/of/platform.c of/promtree: add package-to-path support to pdt of/promtree: add of_pdt namespace to pdt code of/promtree: no longer call prom_ functions directly; use an ops structure of/promtree: make drivers/of/pdt.c no longer sparc-only sparc: break out some PROM device-tree building code out into drivers/of of/sparc: convert various prom_* functions to use phandle sparc: stop exporting openprom.h header powerpc, of_serial: Endianness issues setting up the serial ports of: MTD: Fix OF probing on little-endian systems of: GPIO: Fix OF probing on little-endian systems
-
由 Ralf Baechle 提交于
Commit b0ae1981 ("security: remove unused parameter from security_task_setscheduler()") broke the build of arch/mips/kernel/mips-mt-fpaff.c. The function arguments were unnecessary, not the semicolon ... Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: NJames Morris <jmorris@namei.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'ieee1394-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'ieee1394-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: remove the old IEEE 1394 driver stack ieee1394: move init_ohci1394_dma to drivers/firewire/ Fix trivial change/delete conflict: drivers/ieee1394/eth1394.c is getting removed, but was modified by the networking merge.
-
由 Yoshihisa Abe 提交于
Replace the BKL with a mutex to protect the venus_comm structure which binds the mountpoint with the character device and holds the upcall queues. Signed-off-by: NYoshihisa Abe <yoshiabe@cs.cmu.edu> Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-