Commits 21dc61d3 and 7a1dd50b reduced the board I2C
speed to 20 MHz by default, due to a I2C stretch issue:
while xc5000 uses i2c stretch when a command is sent to it,
au0828 doesn't support this feature.

However, this is needed only for Xceive tuners. The other
I2C devices can work at the max speed.

So, revert the workarounds at board level, handling it at
I2C level, only when talking with xc5000.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

As reported by Kbuildtest:

   In file included from drivers/media/usb/cx231xx/cx231xx-dvb.c:35:0:
   drivers/media/dvb-frontends/si2165.h:57:9: warning: 'struct si2165_config' declared inside parameter list [enabled by default]
     struct i2c_adapter *i2c)
            ^
   drivers/media/dvb-frontends/si2165.h:57:9: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c:157:21: error: variable 'hauppauge_930C_HD_1113xx_si2165_config' has initializer but incomplete type
    static const struct si2165_config hauppauge_930C_HD_1113xx_si2165_config = {
                        ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:158:2: error: unknown field 'i2c_addr' specified in initializer
     .i2c_addr = 0x64,
     ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:158:2: warning: excess elements in struct initializer [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c:158:2: warning: (near initialization for 'hauppauge_930C_HD_1113xx_si2165_config') [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c:159:2: error: unknown field 'chip_mode' specified in initializer
     .chip_mode = SI2165_MODE_PLL_XTAL,
     ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:159:15: error: 'SI2165_MODE_PLL_XTAL' undeclared here (not in a function)
     .chip_mode = SI2165_MODE_PLL_XTAL,
                  ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:159:2: warning: excess elements in struct initializer [enabled by default]
     .chip_mode = SI2165_MODE_PLL_XTAL,
     ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:159:2: warning: (near initialization for 'hauppauge_930C_HD_1113xx_si2165_config') [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c:160:2: error: unknown field 'ref_freq_Hz' specified in initializer
     .ref_freq_Hz = 16000000,
     ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:160:2: warning: excess elements in struct initializer [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c:160:2: warning: (near initialization for 'hauppauge_930C_HD_1113xx_si2165_config') [enabled by default]
>> drivers/media/usb/cx231xx/cx231xx-dvb.c:163:21: error: variable 'pctv_quatro_stick_1114xx_si2165_config' has initializer but incomplete type
    static const struct si2165_config pctv_quatro_stick_1114xx_si2165_config = {
                        ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:164:2: error: unknown field 'i2c_addr' specified in initializer
     .i2c_addr = 0x64,
     ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:164:2: warning: excess elements in struct initializer [enabled by default]
>> drivers/media/usb/cx231xx/cx231xx-dvb.c:164:2: warning: (near initialization for 'pctv_quatro_stick_1114xx_si2165_config') [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c:165:2: error: unknown field 'chip_mode' specified in initializer
     .chip_mode = SI2165_MODE_PLL_EXT,
     ^
>> drivers/media/usb/cx231xx/cx231xx-dvb.c:165:15: error: 'SI2165_MODE_PLL_EXT' undeclared here (not in a function)
     .chip_mode = SI2165_MODE_PLL_EXT,
                  ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:165:2: warning: excess elements in struct initializer [enabled by default]
     .chip_mode = SI2165_MODE_PLL_EXT,
     ^
>> drivers/media/usb/cx231xx/cx231xx-dvb.c:165:2: warning: (near initialization for 'pctv_quatro_stick_1114xx_si2165_config') [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c:166:2: error: unknown field 'ref_freq_Hz' specified in initializer
     .ref_freq_Hz = 24000000,
     ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:166:2: warning: excess elements in struct initializer [enabled by default]
>> drivers/media/usb/cx231xx/cx231xx-dvb.c:166:2: warning: (near initialization for 'pctv_quatro_stick_1114xx_si2165_config') [enabled by default]
   drivers/media/usb/cx231xx/cx231xx-dvb.c: In function 'dvb_init':
   drivers/media/usb/cx231xx/cx231xx-dvb.c:731:3: warning: passing argument 1 of 'si2165_attach' from incompatible pointer type [enabled by default]
      dev->dvb->frontend = dvb_attach(si2165_attach,
      ^
   In file included from drivers/media/usb/cx231xx/cx231xx-dvb.c:35:0:
   drivers/media/dvb-frontends/si2165.h:55:36: note: expected 'const struct si2165_config *' but argument is of type 'const struct si2165_config *'
    static inline struct dvb_frontend *si2165_attach(
                                       ^
   drivers/media/usb/cx231xx/cx231xx-dvb.c:764:3: warning: passing argument 1 of 'si2165_attach' from incompatible pointer type [enabled by default]
      dev->dvb->frontend = dvb_attach(si2165_attach,
      ^
   In file included from drivers/media/usb/cx231xx/cx231xx-dvb.c:35:0:
   drivers/media/dvb-frontends/si2165.h:55:36: note: expected 'const struct si2165_config *' but argument is of type 'const struct si2165_config *'
    static inline struct dvb_frontend *si2165_attach(
                                       ^

That happens because the frontend was disabled by .config, but the
si2165_attach void stub require those structs, and also the
drivers that call it.

While here, remove the duplicated info about the possible I2C
addresses.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/pci/solo6x10/solo6x10-disp.c:221 solo_set_motion_block() error: potential null dereference
'buf'.  (kzalloc returns null)

Also propagate this error up the chain.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Commit 958c7c7e ("[media] v4l2-ctrls: fix corner case in round-to-range code") broke
controls that use a negative range.

The cause was a s32/u32 mixup: ctrl->step is unsigned while all others are signed. So
the result type of the expression '(ctrl)->maximum - ((ctrl)->step / 2)' became unsigned,
making 'val >= (ctrl)->maximum - ((ctrl)->step / 2)' true, since '((u32)-128) > 128'
(if val = -128, maximum = 128 and step = 1).

So carefully cast (step / 2) to s32.

There was one cast of step to s32 where it should have been u32 because both offset and
step are unsigned, so casting to signed makes no sense there. You do need a cast to u32
there, because otherwise architectures that have no 64-bit division start complaining
(step is a u64).
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reported-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Some vendors have their on keymap table that are used on
all (or almost all) models for that vendor.

So, instead of specifying the keymap table per USB ID,
let's use the Vendor ID's table by default.

At the end, this will mean less code to be added when newer
devices for those vendors are added.

Of course, if rc_map is specified per board, it takes
precedence.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for the si2165-based cx231xx devices:
	[2013:025e] PCTV QuatroStick 522e
	[2013:0259] PCTV QuatroStick 521e
	[2040:b131] Hauppauge WinTV 930C-HD (model 1114xx)

They're similar to the already supported:
	[2040:b130] Hauppauge WinTV 930C-HD (model 1113xx)
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Fix the following warnings:
	drivers/media/usb/cx231xx/cx231xx-cards.c: In function 'read_eeprom':
	drivers/media/usb/cx231xx/cx231xx-cards.c:979:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2013:025e] PCTV QuatroStick 522e

The hardware is identical to Hauppauge WinTV 930C-HD (model 1114xx)
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2013:0259] PCTV QuatroStick 521e

The hardware is identical to Hauppauge WinTV 930C-HD (model 1113xx)
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2040:b131] Hauppauge WinTV 930C-HD (model 1114xx)
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Add support for:
	[2040:b130] Hauppauge WinTV 930C-HD (model 1113xx)

After loading the driver the first open to dvb device node fails.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This is needed to support PCTV QuatroStick 522e which uses a si2157.
The si2157 driver is written using i2c_client attachment.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The same card entry is used for HVR-4400 and HVR-5500.
Only HVR-5500 has been tested.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

DVB-T was tested  with 8MHz BW channels in germany
This driver is the simplest possible, it uses automatic mode for all
parameters (TPS).

Added spectrum inversion support.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

We don't have license to redistribute this firmware, so extract
it from the driver, and add the needed headers.
Signed-off-by: NMatthias Schwarzott <zzam@gentoo.org>
Tested-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of using some random value, return an error if the
PCB config is not available or doesn't match a know profile
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

That makes easier to understand the code. It would also help
to add support for having boards with just digital support
on some latter patch, as allowed by some PCB configs.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The initialization is already too complex. Use devm_ functions
to make the code simpler and easier to modify.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

On some newer boards, like HVR-930C HD, the information at
the PCB tables are sometimes higher than the ones actually
available on the device. That causes the probing code to
go past the interfaces array.

Add checks to the interface number before going past the
array.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The max number of interfaces was read from the wrong descriptor.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This protocol is found on Dreambox remotes

[m.chehab@samsung.com: CodingStyle fixes and conflict fix]
Signed-off-by: NMarcel Mol <marcel@mesa.nl>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Multiple pinctrl states are defined for 8, 16 and 24 data pin groups in PPI peripheral.
The driver should select correct group before set up further PPI parameters.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Acked-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

On NOMMU architecture page fault is not triggered if a deleted list entry is
accessed without reinit.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Acked-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

if the pinctrl driver is enabled.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Acked-by: NScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Fixes an old copy+paste bug that has survived all recent code
changes in this code area.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of counting the number of opened file handles, use function
v4l2_fh_is_singular_file() in em28xx_v4l2_open() and em28xx_v4l2_close() to
determine if the file handle is the first/last opened one.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Instead of calling

...
struct v4l2_fh *fh = kzalloc(sizeof(*fh), GFP_KERNEL);
filp->private_data = fh;
v4l2_fh_init(fh, vdev);
v4l2_fh_add(fh);
...

simply use function v4l2_fh_open() which does all of these calls for us.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

struct em28xx_fh isn't needed anymore because the only used field which is left is struct v4l2_fh fh.
Use struct v4l2_fh directly and remvove struct em28xx_fh.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Pointer v4l2" can be used instead of "dev->v4l2, which saves some characters.
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch fix checkpatch:
WARNING: else is not generally useful after a break or return
WARNING: line over 80 characters

[m.chehab@samsung.com: Fix conflicts and use a better coding style for
 passing the parameters to parport_register_device()]
Signed-off-by: NZheng Di <zhengdi05@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Expression ((7bit i2c_addr << 1) & 0x01) can not be right
because it is always 0
Signed-off-by: NRaimonds Cicans <ray@apollo.lv>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The crashed member of struct iss_device is documented to be a bitmask,
but a bool doesn't hold that many (usable) bits. Lines 589 and 659 of
iss.c strongly suggest that "unsigned int" was meant (the same type as
struct iss_pipeline::entities). Currently, any crashed entity will be
blamed on index 0, which is unlikely to be what was intended.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch introduces the use of managed interfaces like
devm_request_mem_region and devm_request_irq and does away with the
calls to free the allocated memory in the probe and remove functions.
The remove function is no longer required and is removed completely.
Signed-off-by: NHimangi Saraogi <himangi774@gmail.com>
Acked-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch fix checkpath "WARNING: void function return statements are not generally useful".
The removed return were useless in that case.
Signed-off-by: NRaphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch fix checkpath "WARNING: Missing a blank line after declarations"
Signed-off-by: NRaphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This patch adds the necessary IDs for the following dvb cards:

Digital Devices Octopus Mini
Digital Devices Cine S2 V6.5
Digital Devices DVBCT V6.1
Digital Devices Octopus V3
Mystique SaTiX-S2 V3

All these changes are taken from the official driver package by Digital
Devices.
http://download.digital-devices.de/download/linux/

[m.chehab@samsung.com: Fixed whitespace mangling]
Signed-off-by: NChristopher Reimer <mail@creimer.net>
Tested-by: N"D. Herrendoerfer" <d.herrendoerfer@herrendoerfer.name>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

[media] drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c: remove unnecessary null test before usb_free_urb

Fix checkpatch warning:
WARNING: usb_free_urb(NULL) is safe this check is probably not required
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Variable b is not initialized.
Only with a small chance it has random value 0xFF.
Remove if statement based on this value.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Variable reg is not initialized.
Random values are written to OMAP4 ISS registers if !ctx->eof_enabled.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Tuner ID set into EEPROM is wrong, which causes driver to select
wrong tuner profile. That leads device non-working. Fix issue by
overriding known bad tuner IDs with suitable default value.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>