All actual uses of the symbol refer to CONFIG_SH_STANDARD_BIOS so this
option could never be activated on H8/300.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch updates and fixes sys_tas() routine for m32r.

In the previous implementation, a lockup rarely caused at sys_tas()
routine in SMP environment.

> > The problem is that touching *addr will generate an oops if that page isn't
> > paged in.  If we convert it to use get_user() then that's an improvement,
> > but we must not run get_user() under spinlock or local_irq_disable().

I rewrote sys_tas() routine by using "lock -> unlock" instructions, and
utilizing the m32r's interrupt handling characteristics; the m32r processor
can accept interrupts only at the 32-bit instruction boundary.  So, the
"unlock" instruction can be executed continuously after the "lock"
instruction execution without any interruptions.

In addition, to solve such a page_fault problem, I use a fixup code like
get_user().

And, as for the kernel lockup problem, we found that a calling
do_page_fault() routine with disabling interrupts might cause a lockup at
flush_tlb_others(), because we checked a completion of IPI handler's
operations in a spin-locked critical section.

Therefore, by using "lock -> unlock" code, we can implement the sys_tas()
rouitine without disabling interrupts explicitly, then no lockups would
happen at flush_tlb_others(), I hope.

Compile check and some working test in SMP environment have done.
Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes a bug of include/asm-m32r/system.h:__cmpxchg_u32().

  static __inline__ unsigned long
  __cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new);

In __cmpxchg_u32(), the "old" value must not be changed to the previous "*p"
value.  But the former code modifies the previous "*p" value.

A deadlock at _atomic_dec_and_lock sometimes happened due to this bug.
Signed-off-by: NHayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Revert dasd eer module until we have a common understanding of how the
interface should be.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When using the dasd diag discipline, the base discipline module (eckd or fba)
can be unloaded, even though the dasd driver requires both discipline modules
(base and diag) to work correctly.

Implement reference counting for both base and diag discipline modules in
order to fix this.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Using FCP devices with V=V support, the input queue stalled when CCQ 97 had
been returned in qdio_do_eqbs.  When this happen we have to reissue the eqbs
instruction.

Another bug was when V=V was enabled we checked if hardware has SIGA-sync
support.  If not we returned with 0 from tiqdio_is_inbound_q_done.  Thus qdio
lost initiative on FCP devices and input queue stalled.  Running devices in
V=V there is no SIGA-sync support but nevertheless we have to process
tiqdio_is_inbound_q_done either.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make resume from suspend-to-ram possible for Samsung P35 laptops.

The radeon mobility 9700 chip on Samsung P35 laptops locks up everything on
resume from suspend-to-ram if it is not reinitialized.

VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
Class 0300: 1002:4e50
       Subsystem: 144d:c00c

Unfortunately, the DMI strings are mostly identical for all Samsung
laptops.  So we match the PCI ID and subsystem ID of the graphics card
which is unique for each Samsung laptop model.
Signed-off-by: NCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[akpm; it happens that the code was still correct, only inefficient ]
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following message will be only printed if DEBUG_NOTIF is on.  "Unknown
notification: subtype=40,flags=0xa0,size=40"
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Cc: James Ketrenos <jketreno@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The compat syscalls are added to sys_ni.c since they are not defined if the
above CONFIG options are off.  Also, nfs would not build with CONFIG_SYSCTL
off.

Noticed by Arthur Othieno.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NLuke Yang <luke.adi@gmail.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some recent PowerBook models tend to lose the ethernet PHY on
suspend/resume.  It -seems- that they use a combo ethernet-firewire PHY
chip and the firewire PHY seems to die the same way when that happens.  Not
trying to toggle the firewire cable power appears to fix it.  So this patch
disables changes to the firewire cable power control GPIO on those models.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Minor updates to the documentation to bring them into sync with current
websites and available features.  The debug flag was switched back to hex
to match the documentation.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When attempting to open the device for writing, only return -EROFS if the disc
appears to be readable but not writable.
Signed-off-by: NPeter Osterlund <petero2@telia.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the pkt_writable_track() function to make it work correctly for all types
of CD/DVD discs.
Signed-off-by: NPeter Osterlund <petero2@telia.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Writing the detected disc type in the kernel log is not useful during normal
use of the driver, so remove the printk statements.
Signed-off-by: NPeter Osterlund <petero2@telia.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Boolean functions should return non-zero when they mean "true", otherwise the
calling code looks weird.  (As suggested by Linus.)
Signed-off-by: NPeter Osterlund <petero2@telia.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It looks like the code in pkt_generic_packet() worked by luck in the past, but
after commit 186d330e leaving rq->cmd_len
uninitialized doesn't work any more.
Signed-off-by: NPeter Osterlund <petero2@telia.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I'm getting oopses with snd-usb-audio in 32-bit compat environments:
control_compat.c:get_ctl_type() doesn't initialize 'info', so
'itemlist[uinfo->value.enumerated.item]' in
usbmixer.c:mixer_ctl_selector_info() might access random memory (The 'if
((int)uinfo->value.enumerated.item >= cval->max)' doesn't fix all problems
because of the unsigned -> signed conversion.)
Signed-off-by: NJuergen Kreileder <jk@blackdown.de>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: NTakashi Iwai <tiwai@suse.de>
Cc: Greg KH <greg@kroah.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

maxnode is a bit index and can't be directly compared against a byte length
like PAGE_SIZE
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently, acpi video options can only be set on kernel command line.  That's
little inflexible; I'd like userland s2ram application that just works, and
modifying kernel command line according to whitelist is not fun.  It is better
to just allow s2ram application to set video options just before suspend
(according to the whitelist).

This implements sysctl to allow setting suspend video options without reboot.

(akpm: Documentation updates for this new sysctl are pending..)
Signed-off-by: NPavel Machek <pavel@suse.cz>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Looks like there was a merge conflict when patches
8f8b1138 and
255acee7 were applied which wasn't properly
resolved. Fix this and add some additional description.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Undo setting of CONFIG_DEBUG_INFO in the previous defconfig update.  It
will make every build much slower and need more disk space and isn't a good
default.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix two problems in the spi subsystem:

1) spi subsystem core dumps when modular spi master is unloaded.
2) spi subsystem core dumps when spi slave device is suspended/resumed and
   module slave driver is not loaded.
Signed-off-by: NStephen Street <stephen@streetfiresound.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I found an issue in cfi_cmdset0001.c.  It is related to cache region
invalidation in the buffered write procedure.

The code performs cache invalidation from "cmd_addr" to "cmd_adr + len" in
do_write_buffer() while we modify region from "adr" to "adr+len".

This issue affects writes + reads of data by small chunks.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I'm seeing a kernel panic on an ES7000-600 when booting in virtual wire
mode.  The panic happens because smp_read_mpc() is passed a physical
address, and it should be virtual.  I tested the attached patch on the
ES7000-600 and on a 2 cpu Dell box, and saw no problems on either.
Signed-off-by: NDan Yeisley <dan.yeisley@unisys.com>
Acked-by: NAndi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some allocations are restricted to a limited set of nodes (due to memory
policies or cpuset constraints).  If the page allocator is not able to find
enough memory then that does not mean that overall system memory is low.

In particular going postal and more or less randomly shooting at processes
is not likely going to help the situation but may just lead to suicide (the
whole system coming down).

It is better to signal to the process that no memory exists given the
constraints that the process (or the configuration of the process) has
placed on the allocation behavior.  The process may be killed but then the
sysadmin or developer can investigate the situation.  The solution is
similar to what we do when running out of hugepages.

This patch adds a check before we kill processes.  At that point
performance considerations do not matter much so we just scan the zonelist
and reconstruct a list of nodes.  If the list of nodes does not contain all
online nodes then this is a constrained allocation and we should kill the
current process.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In the badness() calculation, there's currently this piece of code:

        /*
         * Processes which fork a lot of child processes are likely
         * a good choice. We add the vmsize of the children if they
         * have an own mm. This prevents forking servers to flood the
         * machine with an endless amount of children
         */
        list_for_each(tsk, &p->children) {
                struct task_struct *chld;
                chld = list_entry(tsk, struct task_struct, sibling);
                if (chld->mm = p->mm && chld->mm)
                        points += chld->mm->total_vm;
        }

The intention is clear: If some server (apache) keeps spawning new children
and we run OOM, we want to kill the father rather than picking a child.

This -- to some degree -- also helps a bit with getting fork bombs under
control, though I'd consider this a desirable side-effect rather than a
feature.

There's one problem with this: No matter how many or few children there are,
if just one of them misbehaves, and all others (including the father) do
everything right, we still always kill the whole family.  This hits in real
life; whether it's javascript in konqueror resulting in kdeinit (and thus the
whole KDE session) being hit or just a classical server that spawns children.

Sidenote: The killer does kill all direct children as well, not only the
selected father, see oom_kill_process().

The idea in attached patch is that we do want to account the memory
consumption of the (direct) children to the father -- however not fully.
This maintains the property that fathers with too many children will still
very likely be picked, whereas a single misbehaving child has the chance to
be picked by the OOM killer.

In the patch I account only half (rounded up) of the children's vm_size to
the parent.  This means that if one child eats more mem than the rest of
the family, it will be picked, otherwise it's still the father and thus the
whole family that gets selected.

This is heuristics -- we could debate whether accounting for a fourth would
be better than for half of it.  Or -- if people would consider it worth the
trouble -- make it a sysctl.  For now I sticked to accounting for half,
which should IMHO be a significant improvement.

The patch does one more thing: As users tend to be irritated by the choice
of killed processes (mainly because the children are killed first, despite
some of them having a very low OOM score), I added some more output: The
selected (father) process will be reported first and it's oom_score printed
to syslog.

Description:

Only account for half of children's vm size in oom score calculation

This should still give the parent enough point in case of fork bombs.  If
any child however has more than 50% of the vm size of all children
together, it'll get a higher score and be elected.

This patch also makes the kernel display the oom_score.
Signed-off-by: NKurt Garloff <garloff@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NDave Jones <davej@redhat.com>

Some of netfilter-related members are initalized / copied twice in
skb_clone(). Remove one.

Pointed out by Olivier MATZ <olivier.matz@6wind.com>.

And this patch also fixes order of copying / clearing members.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When redirecting an outgoing packet to loopback, it keeps the original
conntrack reference and information from the outgoing path, which
falsely triggers the check for DNAT on input and the dst_entry is
released to trigger rerouting. ip_route_input refuses to route the
packet because it has a local source address and it is dropped.

Look at the packet itself to dermine if it was NATed. Also fix a
missing inversion that causes unneccesary xfrm lookups.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes 2 bugs in the USB-IrDA code.

The first one is a buffer overrun in the RX path. We are now using
IRDA_SKB_MAX_MTU when initializing the Rx URB.

The second one is a potential stack recursion when unplugging the USB
dongle.  It seems that first we get the Rx URB with a generic error
code, and after a while the Rx URB comes again with a "disconnect"
error code.  Since we are resubmitting the Rx URB immediately after
receiving the first error one, we might enter an endless loop.

When getting an error Rx URB, the patch defers the Rx URB resubmitting
so that it gives us a chance to catch the disconnect one, in case the
dongle has juts been unplugged.

Tested against 2.6.16-rc2.

Patch from Jean Tourrilhes
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: NSamuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ICMP errors are only SNATed when their source matches the source of the
connection they are related to, otherwise the source address is not
changed. This creates problems with ICMP frag. required messages
originating from a router behind the NAT, if private IPs are used the
packet has a good change of getting dropped on the path to its destination.

Always NAT ICMP errors similar to the original connection.

Based on report by Al Viro.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The policy is put once immediately and once at the error label, which results
in the following Oops:

kernel BUG at net/xfrm/xfrm_policy.c:250!
invalid opcode: 0000 [#2]
PREEMPT
[...]
CPU:    0
EIP:    0060:[<c028caf7>]    Not tainted VLI
EFLAGS: 00210246   (2.6.16-rc3 #39)
EIP is at __xfrm_policy_destroy+0xf/0x46
eax: d49f2000   ebx: d49f2000   ecx: f74bd880   edx: f74bd280
esi: d49f2000   edi: 00000001   ebp: cd506dcc   esp: cd506dc8
ds: 007b   es: 007b   ss: 0068
Process ssh (pid: 31970, threadinfo=cd506000 task=cfb04a70)
Stack: <0>cd506000 cd506e34 c028e92b ebde7280 cd506e58 cd506ec0 f74bd280 00000000
       00000214 0000000a 0000000a 00000000 00000002 f7ae6000 00000000 cd506e58
       cd506e14 c0299e36 f74bd280 e873fe00 c02943fd cd506ec0 ebde7280 f271f440
Call Trace:
 [<c0103a44>] show_stack_log_lvl+0xaa/0xb5
 [<c0103b75>] show_registers+0x126/0x18c
 [<c0103e68>] die+0x14e/0x1db
 [<c02b6809>] do_trap+0x7c/0x96
 [<c0104237>] do_invalid_op+0x89/0x93
 [<c01035af>] error_code+0x4f/0x54
 [<c028e92b>] xfrm_lookup+0x349/0x3c2
 [<c02b0b0d>] ip6_datagram_connect+0x317/0x452
 [<c0281749>] inet_dgram_connect+0x49/0x54
 [<c02404d2>] sys_connect+0x51/0x68
 [<c0240928>] sys_socketcall+0x6f/0x166
 [<c0102aa1>] syscall_call+0x7/0xb
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the logical and physical cpu ids of a secondary thread don't match, we will
fail to spin the thread up on pSeries machines due to a bug in pseries/smp.c

We call the RTAS "start-cpu" method with the physical cpu id, the address of
pSeries_secondary_smp_init and the value to pass that function in r3. Currently
we pass "lcpu", the logical cpu id, but pSeries_secondary_smp_init expects
the physical cpu id in r3.

We should be passing pcpu instead.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>