After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.

The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:

  $ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio

Performance report:
   9.70%  perf  [.] perf_hpp__should_skip

Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.

Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.

Performance counter stats for (10 runs):
  before:
   358,319,732,626      cycles                    ( +-  0.55% )
   467,129,581,515      instructions              #    1.30  insns per cycle          ( +-  0.00% )

     150.943975206 seconds time elapsed           ( +-  0.62% )

  now:
   278,785,972,990      cycles                    ( +-  0.12% )
   370,146,797,640      instructions              #    1.33  insns per cycle          ( +-  0.00% )

     116.416670507 seconds time elapsed           ( +-  0.31% )
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>

If -g cumulative option is given, it needs to show entries which don't
have self overhead.  So apply percent-limit to accumulated overhead
percentage in this case.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-14-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Print accumulated stat of a hist entry if requested.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArun Sharma <asharma@fb.com>
Tested-by: NRodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-12-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

When it converted sort entries to hpp formats, it missed se->elide
handling, so add it for compatibility.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-16-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The hists__filter_entries() function is called when down arrow key is
pressed for navigating through the entries in TUI.  It has a check for
filtering out entries that have very small overhead (under min_pcnt).

However it just assumed the entries are sorted by the overhead so when
it saw such a small overheaded entry, it just stopped navigating as an
optimization.  But it's not true anymore due to new --fields and
--sort optoin behavior and this case users cannot go down to a next
entry if ther's an entry with small overhead in-between.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-14-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

So that it can be set properly prior to set up output fields.  That
makes easy to handle/warn errors during the setup since it doesn't
need to be bothered with the GUI.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-11-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The callback was used by TUI for determining color of folded sign
using percent of first field/column. But it cannot be used anymore
since it now support dynamic reordering of output field.

So move the logic to the hist_browser__show_entry().
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-8-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Until now the hpp and sort functions do similar jobs different ways.
Since the sort functions converted/wrapped to hpp formats it can do
the job in a uniform way.

The perf_hpp__sort_list has a list of hpp formats to sort entries and
the perf_hpp__list has a list of hpp formats to print output result.

To have a backward compatibility, it automatically adds 'overhead'
field in front of sort list.  And then all of fields in sort list
added to the output list (if it's not already there).
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/n/tip-7g3h86woz2sckg3h1lj42ygj@git.kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

When TUI hist browser expands/collapses callchains it accounted number
of callchain nodes into total entries to show.  However this code
ignores filtering so that it can make the cursor go to out of screen.

Thanks to Jiri Olsa for pointing out a bug (and a fix) in the code.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1398327843-31845-12-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The hist_browser__reset() is only called right after a filter is
applied so it needs to udpate browser->nr_entries properly.  We cannot
use hists->nr_non_filtered_entreis directly since it's possible that
such entries are also filtered out by minimum percentage limit.

In addition when a filter is used for perf top, hist browser's
nr_entries field was not updated after applying the filter.  But it
needs to be updated as new samples are coming.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1398327843-31845-11-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Rename ->nr_pcnt_entries and hist_browser__update_pcnt_entries() to
->nr_non_filtered_entries and hist_browser__update_nr_entries() since
it's now used for filtering as well.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1398327843-31845-10-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

The nr_entries variable is increased inside the loop in the function
but it always count the first entry regardless of it's filtered or
not; caused an off-by-one error.

It'd become a problem especially there's no entry at all - it'd get a
segfault during referencing a NULL pointer.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1398327843-31845-9-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>

Add 'F' hotkey to toggle relative and absolute percentage of filtered
entries.
Suggested-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-7-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

The --percentage option is for controlling overhead percentage
displayed.  It can only receive either of "relative" or "absolute".

"relative" means it's relative to filtered entries only so that the
sum of shown entries will be always 100%.  "absolute" means it retains
the original value before and after the filter is applied.

  $ perf report -s comm
  # Overhead       Command
  # ........  ............
  #
      74.19%           cc1
       7.61%           gcc
       6.11%            as
       4.35%            sh
       4.14%          make
       1.13%        fixdep
  ...

  $ perf report -s comm -c cc1,gcc --percentage absolute
  # Overhead       Command
  # ........  ............
  #
      74.19%           cc1
       7.61%           gcc

  $ perf report -s comm -c cc1,gcc --percentage relative
  # Overhead       Command
  # ........  ............
  #
      90.69%           cc1
       9.31%           gcc

Note that it has zero effect if no filter was applied.
Suggested-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-3-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

The __hpp__color_fmt used in the TUI code can be replace by the generic
code with small change in print_fn callback.  And it also needs to move
callback function to the generic __hpp__fmt().

No functional changes intended.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1393809254-4480-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For the common evsel list traversal, so that it becomes more compact.

Use the opportunity to start ditching the 'perf_' from 'perf_evlist__',
as discussed, as the whole conversion touches a lot of places, lets do
it piecemeal when we have the chance due to other work, like in this
case.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qnkx7dzm2h6m6uptkfk03ni6@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Several areas already used this technique, so do some audit to
consistently use it elsewhere.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9sbere0kkplwe45ak6rk4a1f@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For the frequent idiom of:

   free(ptr);
   ptr = NULL;

Make it expect a pointer to the pointer being freed, so that it becomes
clear at first sight that the variable being freed is being modified.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pfw02ezuab37kha18wlut7ir@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Its perfectly fine to call free(NULL), so no need to clutter the source
code with all those superfluous testing.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uux5wpvevlerd42gqer13e7n@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Implement a simple, full-screen header window which shows session header
(metadata) information.  Press 'i' key to display the header window.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1388036284-32342-4-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Some hotkeys don't work for perf top so split help messages for them.

It'll be helpful to a future modification.  Also sort the message by
alphabetical order of the hotkey.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1388036284-32342-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Just one use so far, on the hists browser, for completeness since there
we use perf_evlist__{first,last} and perf_evsel__next() for handling the
TAB and UNTAB keys.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-d09l4lejp5427enuf3igpckw@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In a few remaining places where the equivalent open coded variant was
still being used.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4vjnloi5fisilykwxalb5nel@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

They convey no information, perhaps I was bitten by some snake at some
point, complete the detox by naming the last of those arguments more
sensibly.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-u1r0dnjoro08dgztiy2g3t2q@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As the thread comm is going to be implemented by way of a more
complicated data structure than just a pointer to a string from the
thread struct, convert the readers of comm to use an accessor instead of
accessing it directly.

The accessor will be later overriden to support an enhanced comm
implementation.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Tested-by: NJiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wr683zwy94hmj4ibogmnv9ce@git.kernel.org
[ Rename thread__comm_curr() to thread__comm_str() ]
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
[ Fixed up some minor const pointer issues ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The target address is provided by objdump and is not necessary a memory
address.  Add a helper to get the correct address.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-8-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When following a call, annotate_browser__callq() uses the current
symbol's map to look up the target ip.  That will not work if the target
ip is on a map with a different mapping (i.e.  start - pgoff is
different).
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/20130802111050.GA29126@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The previous description: "Search previous string" is usually associated
with the 'N' following a '/string', the opposite of 'n', which is
'Search next string' in the direction established with '/' or '?'.

So change it to 'Search string backwards', to clarify that.

The 'N' hotkey remains to be implemented with the semantic described
above.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5lw5y15d7vv308xbpm8pqe4g@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently the symbol name is displayed at the top when displaying symbol
annotation.  Add to this the dso long name.
Suggested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1375875537-4509-12-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now when diff command is separated from other standard outputs,
we can use perf_hpp__init to initialize all standard columns.

Moving PERF_HPP__OVERHEAD column init back to perf_hpp__init,
and removing extra enable calls.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-nj2xk89tj972tbqswfs498ex@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding 'struct perf_hpp_fmt' into hpp callbacks, so commands can access
their private data.

It'll be handy for diff command in future to be able to access file
related data for each column.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-7vy2m18574b1bicoljn8e9lw@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As evident from 'machine__process_fork_event()' and
'machine__process_exit_event()' the 'pid' member of struct thread is
actually the tid.

Rename 'pid' to 'tid' in struct thread accordingly.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1372944040-32690-13-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The --percent-limit option is for not showing small overhead entries in
the output.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368497347-9628-8-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The --percent-limit option is for not showing small overhead entries in
the output.  Maybe we want to set a certain default value like 0.1.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368497347-9628-7-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The TUI hist browser had a similar variable has_symbols for the same
purpose.  Let's get rid of the duplication.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1365125198-8334-9-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It's used for determining current sort mode which can be one of
NORMAL, BRANCH and new MEMORY.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1364816125-12212-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Initial motivation was to avoid the confusing exit when when '/' is
pressed in non verbose mode, as specified in the help line searches
are only available in verbose mode.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-20xezxim2y4agmkx7f3sucll@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now that the map browser shares the input routine with the hists
browser, there is no need for using any libnewt routine, so remove all
traces except for honouring NO_NEWT=1 on the makefile command line as an
indication that TUI support is not needed, in fact it just sets
NO_SLANG=1.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wae5o7xca9m52bj1re28jc5j@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Instead of an ad-hoc, libnewt based equivalent.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-elrijp95pijt66y6mmij4xm1@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>