- 18 7月, 2018 3 次提交
-
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NPavel Machek <pavel@ucw.cz> Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Geert Uytterhoeven 提交于
Extend the existing support for backup mode to toggle power switches. With a toggle power switch (or level signal), the following steps must be followed exactly: 1. Configure PMIC for backup mode, to change the role of the accessory power switch from a power switch to a wake-up switch, 2. Switch accessory power switch off, to prepare for system suspend, which is a manual step not controlled by software, 3. Suspend system, 4. Switch accessory power switch on, to resume the system. Hence the PMIC is configured for backup mode when "on" or "1" is written to the PMIC's "backup_mode" virtual file in sysfs. Conversely, writing "off" or "0" reverts the role of the accessory switch to a power switch. Unlike with momentary switches, backup mode is not enabled by default, as enabling it prevents the board from being powered off using the power switch, which may confuse the user. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Geert Uytterhoeven 提交于
Currently the BD9571MWV PMIC driver uses the standard "wake_up" sysfs file to control enablement of DDR Backup Mode. However, configuring DDR Backup Mode is not really equivalent to configuring the PMIC as a wake-up source. To avoid confusion, use a custom "backup_mode" attribute file in sysfs instead. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 11 7月, 2018 2 次提交
-
-
由 Kunihiko Hayashi 提交于
Initial commit to add support for regulators implemented in UniPhier SoCs. This supports USB VBUS only. Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kunihiko Hayashi 提交于
Add DT bindings for regulators implemented in UniPhier SoCs. Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 09 7月, 2018 1 次提交
-
-
由 Dan Carpenter 提交于
The current code generates a static cehcker warnings because "rid < 0" is always false: drivers/regulator/max8997-regulator.c:169 max8997_list_voltage() warn: condition is always false The problem is that because of type promotion, if "rid" is negative the comparison against ARRAY_SIZE() is type promoted to size_t and it's treated as a very high positive value. I've changed the order of the checks so now everyone is happy. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 06 7月, 2018 3 次提交
-
-
由 pascal paillet 提交于
Add a device link between the consumer and the driver so that the consumer is not suspended before the driver. The goal is to avoid implementing suspend_late ops in regulator drivers. Signed-off-by: Npascal paillet <p.paillet@st.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 pascal paillet 提交于
Device_link_remove uses the same arguments than device_link_add. The Goal is to avoid storing the link pointer. Signed-off-by: Npascal paillet <p.paillet@st.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 pascal paillet 提交于
Change suspend_late ops to suspend normal ops. The goal is to avoid requesting all the regulator drivers to be operational in suspend late phase. Signed-off-by: Npascal paillet <p.paillet@st.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 02 7月, 2018 1 次提交
-
-
由 Fabio Estevam 提交于
This reverts commit 5fe156f1. Commit 5fe156f1 ("regulator: pfuze100: add enable/disable for switch") causes boot regression on some platforms such as imx6sl-evk and imx6sll-evk. After this commit the SW4 regulator will be turned off and since it supplies the DDR voltage on these boards, a kernel hang is observed. Revert it to avoid breaking old dtb's. Fixes: 5fe156f1 ("regulator: pfuze100: add enable/disable for switch") Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 28 6月, 2018 2 次提交
-
-
由 Matti Vaittinen 提交于
Same general chip description was written in MFD and Regulator binding documents for ROHM bd71837 PMIC. Remove description from regulator binding as suggested by Rob H. Signed-off-by: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Matti Vaittinen 提交于
Address issues spotted by Andy Shevchenko during review of original patch No functional changes intended Signed-off-by: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 27 6月, 2018 2 次提交
-
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@ingics.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@ingics.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 18 6月, 2018 3 次提交
-
-
由 Matthias Kaehlcke 提交于
regulator_map_linar_range() => regulator_map_linear_range() Signed-off-by: NMatthias Kaehlcke <mka@chromium.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Stefan Wahren 提交于
This extends the pfuze100 driver with pfuze3001 support. Latest datasheet: https://www.nxp.com/docs/en/data-sheet/PF3001.pdfSigned-off-by: NRobin Gong <yibin.gong@nxp.com> Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Stefan Wahren 提交于
This patch extends binding according to support the pfuze3001 chip. Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 17 6月, 2018 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "A collection of fixes that should go into -rc1. This contains: - bsg_open vs bsg_unregister race fix (Anatoliy) - NVMe pull request from Christoph, with fixes for regressions in this window, FC connect/reconnect path code unification, and a trace point addition. - timeout fix (Christoph) - remove a few unused functions (Christoph) - blk-mq tag_set reinit fix (Roman)" * tag 'for-linus-20180616' of git://git.kernel.dk/linux-block: bsg: fix race of bsg_open and bsg_unregister block: remov blk_queue_invalidate_tags nvme-fabrics: fix and refine state checks in __nvmf_check_ready nvme-fabrics: handle the admin-only case properly in nvmf_check_ready nvme-fabrics: refactor queue ready check blk-mq: remove blk_mq_tagset_iter nvme: remove nvme_reinit_tagset nvme-fc: fix nulling of queue data on reconnect nvme-fc: remove reinit_request routine blk-mq: don't time out requests again that are in the timeout handler nvme-fc: change controllers first connect to use reconnect path nvme: don't rely on the changed namespace list log nvmet: free smart-log buffer after use nvme-rdma: fix error flow during mapping request data nvme: add bio remapping tracepoint nvme: fix NULL pointer dereference in nvme_init_subsystem blk-mq: reinit q->tag_set_list entry only after grace period
-
git://linuxtv.org/mchehab/experimental由 Linus Torvalds 提交于
Pull documentation fixes from Mauro Carvalho Chehab: "This solves a series of broken links for files under Documentation, and improves a script meant to detect such broken links (see scripts/documentation-file-ref-check). The changes on this series are: - can.rst: fix a footnote reference; - crypto_engine.rst: Fix two parsing warnings; - Fix a lot of broken references to Documentation/*; - improve the scripts/documentation-file-ref-check script, in order to help detecting/fixing broken references, preventing false-positives. After this patch series, only 33 broken references to doc files are detected by scripts/documentation-file-ref-check" * tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental: (26 commits) fix a series of Documentation/ broken file name references Documentation: rstFlatTable.py: fix a broken reference ABI: sysfs-devices-system-cpu: remove a broken reference devicetree: fix a series of wrong file references devicetree: fix name of pinctrl-bindings.txt devicetree: fix some bindings file names MAINTAINERS: fix location of DT npcm files MAINTAINERS: fix location of some display DT bindings kernel-parameters.txt: fix pointers to sound parameters bindings: nvmem/zii: Fix location of nvmem.txt docs: Fix more broken references scripts/documentation-file-ref-check: check tools/*/Documentation scripts/documentation-file-ref-check: get rid of false-positives scripts/documentation-file-ref-check: hint: dash or underline scripts/documentation-file-ref-check: add a fix logic for DT scripts/documentation-file-ref-check: accept more wildcards at filenames scripts/documentation-file-ref-check: fix help message media: max2175: fix location of driver's companion documentation media: v4l: fix broken video4linux docs locations media: dvb: point to the location of the old README.dvb-usb file ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs由 Linus Torvalds 提交于
Pull fsnotify updates from Jan Kara: "fsnotify cleanups unifying handling of different watch types. This is the shortened fsnotify series from Amir with the last five patches pulled out. Amir has modified those patches to not change struct inode but obviously it's too late for those to go into this merge window" * tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: add fsnotify_add_inode_mark() wrappers fanotify: generalize fanotify_should_send_event() fsnotify: generalize send_to_group() fsnotify: generalize iteration of marks by object type fsnotify: introduce marks iteration helpers fsnotify: remove redundant arguments to handle_event() fsnotify: use type id to identify connector object type
-
git://github.com/bzolnier/linux由 Linus Torvalds 提交于
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "There is nothing really major here, few small fixes, some cleanups and dead drivers removal: - mark omapfb drivers as orphans in MAINTAINERS file (Tomi Valkeinen) - add missing module license tags to omap/omapfb driver (Arnd Bergmann) - add missing GPIOLIB dependendy to omap2/omapfb driver (Arnd Bergmann) - convert savagefb, aty128fb & radeonfb drivers to use msleep & co. (Jia-Ju Bai) - allow COMPILE_TEST build for viafb driver (media part was reviewed by media subsystem Maintainer) - remove unused MERAM support from sh_mobile_lcdcfb and shmob-drm drivers (drm parts were acked by shmob-drm driver Maintainer) - remove unused auo_k190xfb drivers - misc cleanups (Souptick Joarder, Wolfram Sang, Markus Elfring, Andy Shevchenko, Colin Ian King)" * tag 'fbdev-v4.18' of git://github.com/bzolnier/linux: (26 commits) fb_omap2: add gpiolib dependency video/omap: add module license tags MAINTAINERS: make omapfb orphan video: fbdev: pxafb: match_string() conversion fixup video: fbdev: nvidia: fix spelling mistake: "scaleing" -> "scaling" video: fbdev: fix spelling mistake: "frambuffer" -> "framebuffer" video: fbdev: pxafb: Convert to use match_string() helper video: fbdev: via: allow COMPILE_TEST build video: fbdev: remove unused sh_mobile_meram driver drm: shmobile: remove unused MERAM support video: fbdev: sh_mobile_lcdcfb: remove unused MERAM support video: fbdev: remove unused auo_k190xfb drivers video: omap: Improve a size determination in omapfb_do_probe() video: sm501fb: Improve a size determination in sm501fb_probe() video: fbdev-MMP: Improve a size determination in path_init() video: fbdev-MMP: Delete an error message for a failed memory allocation in two functions video: auo_k190x: Delete an error message for a failed memory allocation in auok190x_common_probe() video: sh_mobile_lcdcfb: Delete an error message for a failed memory allocation in two functions video: sh_mobile_meram: Delete an error message for a failed memory allocation in sh_mobile_meram_probe() video: fbdev: sh_mobile_meram: Drop SUPERH platform dependency ...
-
- 16 6月, 2018 18 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull AFS updates from Al Viro: "Assorted AFS stuff - ended up in vfs.git since most of that consists of David's AFS-related followups to Christoph's procfs series" * 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs: Optimise callback breaking by not repeating volume lookup afs: Display manually added cells in dynamic root mount afs: Enable IPv6 DNS lookups afs: Show all of a server's addresses in /proc/fs/afs/servers afs: Handle CONFIG_PROC_FS=n proc: Make inline name size calculation automatic afs: Implement network namespacing afs: Mark afs_net::ws_cell as __rcu and set using rcu functions afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus() proc: Add a way to make network proc files writable afs: Rearrange fs/afs/proc.c to remove remaining predeclarations. afs: Rearrange fs/afs/proc.c to move the show routines up afs: Rearrange fs/afs/proc.c by moving fops and open functions down afs: Move /proc management functions to the end of the file
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull compat updates from Al Viro: "Some biarch patches - getting rid of assorted (mis)uses of compat_alloc_user_space(). Not much in that area this cycle..." * 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: orangefs: simplify compat ioctl handling signalfd: lift sigmask copyin and size checks to callers of do_signalfd4() vmsplice(): lift importing iovec into vmsplice(2) and compat counterpart
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull aio fixes from Al Viro: "Assorted AIO followups and fixes" * 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: eventpoll: switch to ->poll_mask aio: only return events requested in poll_mask() for IOCB_CMD_POLL eventfd: only return events requested in poll_mask() aio: mark __aio_sigset::sigmask const
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Various netfilter fixlets from Pablo and the netfilter team. 2) Fix regression in IPVS caused by lack of PMTU exceptions on local routes in ipv6, from Julian Anastasov. 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia. 4) Don't crash on poll in TLS, from Daniel Borkmann. 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things including Avahi mDNS. From Bart Van Assche. 6) Missing of_node_put in qcom/emac driver, from Yue Haibing. 7) We lack checking of the TCP checking in one special case during SYN receive, from Frank van der Linden. 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg. 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman. 10) Must grab HW caps before doing quirk checks in stmmac driver, from Jose Abreu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: stmmac: Run HWIF Quirks after getting HW caps neighbour: skip NTF_EXT_LEARNED entries during forced gc net: cxgb3: add error handling for sysfs_create_group tls: fix waitall behavior in tls_sw_recvmsg tls: fix use-after-free in tls_push_record l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl() l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels mlxsw: spectrum_switchdev: Fix port_vlan refcounting mlxsw: spectrum_router: Align with new route replace logic mlxsw: spectrum_router: Allow appending to dev-only routes ipv6: Only emit append events for appended routes stmmac: added support for 802.1ad vlan stripping cfg80211: fix rcu in cfg80211_unregister_wdev mac80211: Move up init of TXQs mac80211_hwsim: fix module init error paths cfg80211: initialize sinfo in cfg80211_get_station nl80211: fix some kernel doc tag mistakes hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload rds: avoid unenecessary cong_update in loop transport l2tp: clean up stale tunnel or session in pppol2tp_connect's error path ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux由 Linus Torvalds 提交于
Pull module updates from Jessica Yu: "Minor code cleanup and also allow sig_enforce param to be shown in sysfs with CONFIG_MODULE_SIG_FORCE" * tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Allow to always show the status of modsign module: Do not access sig_enforce directly
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml由 Linus Torvalds 提交于
Pull uml updates from Richard Weinberger: "Minor updates for UML: - fixes for our new vector network driver by Anton - initcall cleanup by Alexander - We have a new mailinglist, sourceforge.net sucks" * 'for-linus-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Fix raw interface options um: Fix initialization of vector queues um: remove uml initcalls um: Update mailing list address
-
由 Linus Torvalds 提交于
Merge tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains some small RISC-V updates I'd like to target for 4.18. They are all fairly small this time. Here's a short summary, there's more info in the commits/merges: - a fix to __clear_user to respect the passed arguments. - enough support for the perf subsystem to work with RISC-V's ISA defined performance counters. - support for sparse and cleanups suggested by it. - support for R_RISCV_32 (a relocation, not the 32-bit ISA). - some MAINTAINERS cleanups. - the addition of CONFIG_HVC_RISCV_SBI to our defconfig, as it's always present. I've given these a simple build+boot test" * tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig RISC-V: Handle R_RISCV_32 in modules riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't set riscv: add riscv-specific predefines to CHECKFLAGS riscv: split the declaration of __copy_user riscv: no __user for probe_kernel_address() riscv: use NULL instead of a plain 0 perf: riscv: Add Document for Future Porting Guide perf: riscv: preliminary RISC-V support MAINTAINERS: Update Albert's email, he's back at Berkeley MAINTAINERS: Add myself as a maintainer for SiFive's drivers riscv: Fix the bug in memory access fixup code
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull more kvm updates from Paolo Bonzini: "Mostly the PPC part of the release, but also switching to Arnd's fix for the hyperv config issue and a typo fix. Main PPC changes: - reimplement the MMIO instruction emulation - transactional memory support for PR KVM - improve radix page table handling" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (63 commits) KVM: x86: VMX: redo fix for link error without CONFIG_HYPERV KVM: x86: fix typo at kvm_arch_hardware_setup comment KVM: PPC: Book3S PR: Fix failure status setting in tabort. emulation KVM: PPC: Book3S PR: Enable use on POWER9 bare-metal hosts in HPT mode KVM: PPC: Book3S PR: Don't let PAPR guest set MSR hypervisor bit KVM: PPC: Book3S PR: Fix failure status setting in treclaim. emulation KVM: PPC: Book3S PR: Fix MSR setting when delivering interrupts KVM: PPC: Book3S PR: Handle additional interrupt types KVM: PPC: Book3S PR: Enable kvmppc_get/set_one_reg_pr() for HTM registers KVM: PPC: Book3S: Remove load/put vcpu for KVM_GET_REGS/KVM_SET_REGS KVM: PPC: Remove load/put vcpu for KVM_GET/SET_ONE_REG ioctl KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl KVM: PPC: Book3S PR: Enable HTM for PR KVM for KVM_CHECK_EXTENSION ioctl KVM: PPC: Book3S PR: Support TAR handling for PR KVM HTM KVM: PPC: Book3S PR: Add guard code to prevent returning to guest with PR=0 and Transactional state KVM: PPC: Book3S PR: Add emulation for tabort. in privileged state KVM: PPC: Book3S PR: Add emulation for trechkpt. KVM: PPC: Book3S PR: Add emulation for treclaim. KVM: PPC: Book3S PR: Restore NV regs after emulating mfspr from TM SPRs KVM: PPC: Book3S PR: Always fail transactions in guest privileged state ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull virtio updates from Michael Tsirkin: "virtio, vhost: features, fixes - PCI virtual function support for virtio - DMA barriers for virtio strong barriers - bugfixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: update the comments for transport features virtio_pci: support enabling VFs vhost: fix info leak due to uninitialized memory virtio_ring: switch to dma_XX barriers for rpmsg
-
由 Mauro Carvalho Chehab 提交于
As files move around, their previous links break. Fix the references for them. Acked-by: NAndy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
The old HOWTO was removed a long time ago. The flat table version is not metioned elsewhere, so just get rid of the text. Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
This file doesn't exist anymore: Documentation/cpu-freq/user-guide.txt As the ABI already points to Documentation/cpu-freq, just remove the broken link and the associated text. Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
As files got renamed, their references broke. Manually fix a series of broken refs at the DT bindings. Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
Rename: pinctrl-binding.txt -> pinctrl-bindings.txt In order to match the current name of this file. Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
There were some file movements that changed the location for some DT bindings. Fix them with: scripts/documentation-file-ref-check --fix After manually checking if the new file makes sense. Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
The specified locations are not right. Fix the wildcard logic to point to the correct directories. Without that, get-maintainer won't get things right: $ ./scripts/get_maintainer.pl --no-git-fallback --no-r --no-n --no-l -f Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) mark.rutland@arm.com (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) After the patch, it will properly point to NPCM arch maintainers: $ ./scripts/get_maintainer.pl --no-git-fallback --no-r --no-n --no-l -f Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp avifishman70@gmail.com (supporter:ARM/NUVOTON NPCM ARCHITECTURE) tmaimon77@gmail.com (supporter:ARM/NUVOTON NPCM ARCHITECTURE) robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) mark.rutland@arm.com (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) Cc: Avi Fishman <avifishman70@gmail.com> Cc: Tomer Maimon <tmaimon77@gmail.com> Cc: Patrick Venture <venture@google.com> Cc: Nancy Yuen <yuenn@google.com> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
Those files got a manufacturer's name prepended and were moved around. Adjust their references accordingly. Also, due those movements, Documentation/devicetree/bindings/video doesn't exist anymore. Cc: David Airlie <airlied@linux.ie> Cc: David Lechner <david@lechnology.com> Cc: Peter Senna Tschudin <peter.senna@collabora.com> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@nxp.com> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: NJonathan Corbet <corbet@lwn.net>
-
由 Mauro Carvalho Chehab 提交于
The alsa parameters file was renamed to alsa-configuration.rst. With regards to OSS, it got retired as a hole by at changeset 727dede0 ("sound: Retire OSS"). So, it doesn't make sense to keep mentioning it at kernel-parameters.txt. Fixes: 727dede0 ("sound: Retire OSS") Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: NJonathan Corbet <corbet@lwn.net>
-