This patch cleans up parameters on IO paths.
The key idea is to use f2fs_io_info adding a parameter, block address, and then
use this structure as parameters.
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Use more common function ra_meta_pages() with META_POR to readahead node blocks
in restore_node_summary() instead of ra_sum_pages(), hence we can simplify the
readahead code there, and also we can remove unused function ra_sum_pages().

changes from v2:
 o use invalidate_mapping_pages as before suggested by Changman Lee.
changes from v1:
 o fix one bug when using truncate_inode_pages_range which is pointed out by
   Jaegeuk Kim.
Reviewed-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch moves one member of struct nat_entry: _flag_ to struct node_info,
so _version_ in struct node_info and _flag_ which are unsigned char type will
merge to one 32-bit space in register/memory. So the size of nat_entry will be
reduced from 28 bytes to 24 bytes (for 64-bit machine, reduce its size from 40
bytes to 32 bytes) and then slab memory using by f2fs will be reduced.

changes from v2:
 o update description of memory usage gain for 64-bit machine suggested by
   Changman Lee.
changes from v1:
 o introduce inline copy_node_info() to copy valid data from node info suggested
   by Jaegeuk Kim, it can avoid bug.
Reviewed-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Let's add readahead code for reading contiguous compact/normal summary blocks
in checkpoint, then we will gain better performance in mount procedure.

Changes from v1
  o remove inappropriate 'unlikely' in npages_for_summary_flush.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch calls f2fs_kunmap_page which I missed before.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Now we use inmemory pages for atomic write only and provide abort procedure,
we don't need to truncate them explicitly.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The ckpt_valid_map and cur_valid_map are synced by seg_info_to_raw_sit.

In the case of small discards, the candidates are selected before sync,
while fitrim selects candidates after sync.

So, for small discards, we need to add candidates only just being obsoleted.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds two new ioctls to release inmemory pages grabbed by atomic
writes.
 o f2fs_ioc_abort_volatile_write
  - If transaction was failed, all the grabbed pages and data should be written.
 o f2fs_ioc_release_volatile_write
  - This is to enhance the performance of PERSIST mode in sqlite.

In order to avoid huge memory consumption which causes OOM, this patch changes
volatile writes to use normal dirty pages, instead blocked flushing to the disk
as long as system does not suffer from memory pressure.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We don't need to call lock_op and lock_page at the aborting path.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If there is not enough available memory, we need to trigger f2fs_sync_fs.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We don't need to force to write dirty_exceeded for f2fs_balance_fs_bg.
This flag was only meaningful to write bypassing conditions.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Merge misc fixes from Andrew Morton:
 "12 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, vmscan: prevent kswapd livelock due to pfmemalloc-throttled process being killed
  memcg: fix destination cgroup leak on task charges migration
  mm: memcontrol: switch soft limit default back to infinity
  mm/debug_pagealloc: remove obsolete Kconfig options
  vfs: renumber FMODE_NONOTIFY and add to uniqueness check
  arch/blackfin/mach-bf533/boards/stamp.c: add linux/delay.h
  ocfs2: fix the wrong directory passed to ocfs2_lookup_ino_from_name() when link file
  MAINTAINERS: update rydberg's addresses
  mm: protect set_page_dirty() from ongoing truncation
  mm: prevent endless growth of anon_vma hierarchy
  exit: fix race between wait_consider_task() and wait_task_zombie()
  ocfs2: remove bogus check in dlm_process_recovery_data

Charles Shirron and Paul Cassella from Cray Inc have reported kswapd
stuck in a busy loop with nothing left to balance, but
kswapd_try_to_sleep() failing to sleep.  Their analysis found the cause
to be a combination of several factors:

1. A process is waiting in throttle_direct_reclaim() on pgdat->pfmemalloc_wait

2. The process has been killed (by OOM in this case), but has not yet been
   scheduled to remove itself from the waitqueue and die.

3. kswapd checks for throttled processes in prepare_kswapd_sleep():

        if (waitqueue_active(&pgdat->pfmemalloc_wait)) {
                wake_up(&pgdat->pfmemalloc_wait);
		return false; // kswapd will not go to sleep
	}

   However, for a process that was already killed, wake_up() does not remove
   the process from the waitqueue, since try_to_wake_up() checks its state
   first and returns false when the process is no longer waiting.

4. kswapd is running on the same CPU as the only CPU that the process is
   allowed to run on (through cpus_allowed, or possibly single-cpu system).

5. CONFIG_PREEMPT_NONE=y kernel is used. If there's nothing to balance, kswapd
   encounters no voluntary preemption points and repeatedly fails
   prepare_kswapd_sleep(), blocking the process from running and removing
   itself from the waitqueue, which would let kswapd sleep.

So, the source of the problem is that we prevent kswapd from going to
sleep until there are processes waiting on the pfmemalloc_wait queue,
and a process waiting on a queue is guaranteed to be removed from the
queue only when it gets scheduled.  This was done to make sure that no
process is left sleeping on pfmemalloc_wait when kswapd itself goes to
sleep.

However, it isn't necessary to postpone kswapd sleep until the
pfmemalloc_wait queue actually empties.  To prevent processes from being
left sleeping, it's actually enough to guarantee that all processes
waiting on pfmemalloc_wait queue have been woken up by the time we put
kswapd to sleep.

This patch therefore fixes this issue by substituting 'wake_up' with
'wake_up_all' and removing 'return false' in the code snippet from
prepare_kswapd_sleep() above.  Note that if any process puts itself in
the queue after this waitqueue_active() check, or after the wake up
itself, it means that the process will also wake up kswapd - and since
we are under prepare_to_wait(), the wake up won't be missed.  Also we
update the comment prepare_kswapd_sleep() to hopefully more clearly
describe the races it is preventing.

Fixes: 5515061d ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage")
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>	[3.6+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We are supposed to take one css reference per each memory page and per
each swap entry accounted to a memory cgroup.  However, during task
charges migration we take a reference to the destination cgroup twice
per each swap entry: first in mem_cgroup_do_precharge()->try_charge()
and then in mem_cgroup_move_swap_account(), permanently leaking the
destination cgroup.

The hunk taking the second reference seems to be a leftover from the
pre-00501b53 ("mm: memcontrol: rewrite charge API") era.  Remove it
to fix the leak.

Fixes: e8ea14cc (mm: memcontrol: take a css reference for each charged page)
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 3e32cb2e ("mm: memcontrol: lockless page counters")
accidentally switched the soft limit default from infinity to zero,
which turns all memcgs with even a single page into soft limit excessors
and engages soft limit reclaim on all of them during global memory
pressure.  This makes global reclaim generally more aggressive, but also
inverts the meaning of existing soft limit configurations where unset
soft limits are usually more generous than set ones.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NVladimir Davydov <vdavydov@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These are obsolete since commit e30825f1 ("mm/debug-pagealloc:
prepare boottime configurable") was merged.  So remove them.

[pebolle@tiscali.nl: find obsolete Kconfig options]
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix clashing values for O_PATH and FMODE_NONOTIFY on sparc.  The
clashing O_PATH value was added in commit 5229645b ("vfs: add
nonconflicting values for O_PATH") but this can't be changed as it is
user-visible.

FMODE_NONOTIFY is only used internally in the kernel, but it is in the
same numbering space as the other O_* flags, as indicated by the comment
at the top of include/uapi/asm-generic/fcntl.h (and its use in
fs/notify/fanotify/fanotify_user.c).  So renumber it to avoid the clash.

All of this has happened before (commit 12ed2e36: "fanotify:
FMODE_NONOTIFY and __O_SYNC in sparc conflict"), and all of this will
happen again -- so update the uniqueness check in fcntl_init() to
include __FMODE_NONOTIFY.
Signed-off-by: NDavid Drysdale <drysdale@google.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NJan Kara <jack@suse.cz>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

build error

  arch/blackfin/mach-bf533/boards/stamp.c:834:2: error: implicit declaration of function 'mdelay'
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reported-by: NWu Fengguang <fengguang.wu@intel.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In ocfs2_link(), the parent directory inode passed to function
ocfs2_lookup_ino_from_name() is wrong.  Parameter dir is the parent of
new_dentry not old_dentry.  We should get old_dir from old_dentry and
lookup old_dentry in old_dir in case another node remove the old dentry.

With this change, hard linking works again, when paths are relative with
at least one subdirectory.  This is how the problem was reproducable:

  # mkdir a
  # mkdir b
  # touch a/test
  # ln a/test b/test
  ln: failed to create hard link `b/test' => `a/test': No such file or  directory

However when creating links in the same dir, it worked well.

Now the link gets created.

Fixes: 0e048316 ("ocfs2: check existence of old dentry in ocfs2_link()")
Signed-off-by: Njoyce.xue <xuejiufei@huawei.com>
Reported-by: NSzabo Aron - UBIT <aron@ubit.hu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Tested-by: NAron Szabo <aron@ubit.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

My ISP finally gave up on the old mail address, so I am moving things
over to bitmath.org instead.  Also change the status fields to better
reflect reality.
Signed-off-by: NHenrik Rydberg <rydberg@bitmath.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tejun, while reviewing the code, spotted the following race condition
between the dirtying and truncation of a page:

__set_page_dirty_nobuffers()       __delete_from_page_cache()
  if (TestSetPageDirty(page))
                                     page->mapping = NULL
				     if (PageDirty())
				       dec_zone_page_state(page, NR_FILE_DIRTY);
				       dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);
    if (page->mapping)
      account_page_dirtied(page)
        __inc_zone_page_state(page, NR_FILE_DIRTY);
	__inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);

which results in an imbalance of NR_FILE_DIRTY and BDI_RECLAIMABLE.

Dirtiers usually lock out truncation, either by holding the page lock
directly, or in case of zap_pte_range(), by pinning the mapcount with
the page table lock held.  The notable exception to this rule, though,
is do_wp_page(), for which this race exists.  However, do_wp_page()
already waits for a locked page to unlock before setting the dirty bit,
in order to prevent a race where clear_page_dirty() misses the page bit
in the presence of dirty ptes.  Upgrade that wait to a fully locked
set_page_dirty() to also cover the situation explained above.

Afterwards, the code in set_page_dirty() dealing with a truncation race
is no longer needed.  Remove it.
Reported-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Constantly forking task causes unlimited grow of anon_vma chain.  Each
next child allocates new level of anon_vmas and links vma to all
previous levels because pages might be inherited from any level.

This patch adds heuristic which decides to reuse existing anon_vma
instead of forking new one.  It adds counter anon_vma->degree which
counts linked vmas and directly descending anon_vmas and reuses anon_vma
if counter is lower than two.  As a result each anon_vma has either vma
or at least two descending anon_vmas.  In such trees half of nodes are
leafs with alive vmas, thus count of anon_vmas is no more than two times
bigger than count of vmas.

This heuristic reuses anon_vmas as few as possible because each reuse
adds false aliasing among vmas and rmap walker ought to scan more ptes
when it searches where page is might be mapped.

Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu
Fixes: 5beb4930 ("mm: change anon_vma linking to fix multi-process server scalability issue")
[akpm@linux-foundation.org: fix typo, per Rik]
Signed-off-by: NKonstantin Khlebnikov <koct9i@gmail.com>
Reported-by: NDaniel Forrest <dan.forrest@ssec.wisc.edu>
Tested-by: NMichal Hocko <mhocko@suse.cz>
Tested-by: NJerome Marchand <jmarchan@redhat.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>	[2.6.34+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

wait_consider_task() checks EXIT_ZOMBIE after EXIT_DEAD/EXIT_TRACE and
both checks can fail if we race with EXIT_ZOMBIE -> EXIT_DEAD/EXIT_TRACE
change in between, gcc needs to reload p->exit_state after
security_task_wait().  In this case ->notask_error will be wrongly
cleared and do_wait() can hang forever if it was the last eligible
child.

Many thanks to Arne who carefully investigated the problem.

Note: this bug is very old but it was pure theoretical until commit
b3ab0316 ("wait: completely ignore the EXIT_DEAD tasks").  Before
this commit "-O2" was probably enough to guarantee that compiler won't
read ->exit_state twice.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reported-by: NArne Goedeke <el@laramies.com>
Tested-by: NArne Goedeke <el@laramies.com>
Cc: <stable@vger.kernel.org>	[3.15+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In dlm_process_recovery_data, only when dlm_new_lock failed the ret will
be set to -ENOMEM.  And in this case, newlock is definitely NULL.  So
test newlock is meaningless, remove it.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Reviewed-by: NAlex Chen <alex.chen@huawei.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull kbuild fix from Michal Marek:
 "make mrproper / distclean stopped removing the generated debian/
  directory in v3.16.  This fixes it"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Fix removal of the debian/ directory

The introduction of the uapi directories in v3.7-rc1 moved some of the
generated headers from arch/*/include/generated to the uapi directory,
keeping the #include directives intact.

This creates a problem when bisecting, because the unversioned files are
not cleaned automatically by git and the compiler might include stale
headers as a result.  Instead of cleaning them in the Makefiles, promote
arch/*/include/generated/uapi in the search path.  Under normal
circumstances, there is no overlap between this uapi subdirectory and
its parent, so the include choices remain the same.  We keep
arch/*/include/generated/uapi in the USERINCLUDE variable so that it is
usable standalone.

Note that we cannot completely swap the order of the uapi and
kernel-only directories, since the headers in include/uapi/asm-generic
are meant to be wrapped by their include/asm-generic counterparts when
building kernel code.
Reported-by: N"Nicholas A. Bellinger" <nab@linux-iscsi.org>
Reported-by: NDavid Drysdale <dmd@lurklurk.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull pinctrl fixes from Linus Walleij:
 "Allright allright I've been lazy over christmas and New Years.  Here
  are a few collected pin control fixes eventually.  Details:

  A set of assorted pin control fixes for the Rockchip and STi drivers"

* tag 'pinctrl-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: st: Add irq_disable hook to st_gpio_irqchip
  pinctrl: st: avoid multiple mutex lock
  pinctrl: rockchip: Fix enable/disable/mask/unmask
  pinctrl: rockchip: Handle wakeup pins

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are an ACPI device power management initialization fix (-stable
  material), two commits renaming stuff in the ACPI processor driver to
  make it more suitable for ARM64 processors and a new ACPI backlight
  blacklist entry.

  Specifics:

   - Fix ACPI power management intialization for device objects
     corresponding to devices that are not present at the init time (the
     _STA control method returns 0 for them) and therefore should not be
     regarded as power manageable (Rafael J Wysocki).

   - Rename a structure field and two functions used by the ACPI
     processor driver to make them less tied to architectures that use
     APICs (both x86 and ia64) and more suitable for ARM64 processors
     (Hanjun Guo).

   - Add a disable_native_backlight quirk for Dell XPS15 L521X designed
     in an unusual way preventing native backlight from working on that
     machine (Hans de Goede)"

* tag 'pm+acpi-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: Add disable_native_backlight quirk for Dell XPS15 L521X
  ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu()
  ACPI / processor: Convert apic_id to phys_id to make it arch agnostic
  ACPI / PM: Fix PM initialization for devices that are not present

Pull keyrings fixes from David Howells:
 "Two fixes:

   - Fix for the order in which things are done during key garbage
     collection to prevent named keyrings causing a crash
     [CVE-2014-9529].

   - Fix assoc_array to explicitly #include rcupdate.h to prevent
     compilation errors under certain circumstances"

* tag 'keys-fixes-20150107' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  assoc_array: Include rcupdate.h for call_rcu() definition
  KEYS: close race between key lookup and freeing

pull virtio/vhost fixes from Michael Tsirkin:
 "This fixes a couple of bugs triggered by hot-unplug of virtio devices,
  as well as a regression in vhost-net"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost/net: length miscalculation
  virtio_pci: document why we defer kfree
  virtio_pci: defer kfree until release callback
  virtio_pci: device-specific release callback
  virtio: make del_vqs idempotent

Pull IOMMU fixes from Joerg Roedel:
 "Including:

   - a domain structure leak fix in the Intel VT-d driver

   - compile error fix for the VMSA IPMMU driver because of the
     IOMMU_EXEC -> IOMMU_NOEXEC conversion

   - two small cleanups as an aftermath of the merge window and the
     domain-leak fix"

* tag 'iommu-fixes-v3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/rockchip: Drop owner assignment from platform_drivers
  iommu/vt-d: Remove dead code in device_notifier
  iommu/vt-d: Fix dmar_domain leak in iommu_attach_device
  iommu/ipmmu-vmsa: Change IOMMU_EXEC to IOMMU_NOEXEC

Pull crypto fixes from Herbert Xu:
 "This fixes a build problem with sha-mb with old toolchains and an
  implementation bug in the ctr(aes)/by8 branch of aesni-intel that's
  enabled when AVX is available"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: sha-mb - Add avx2_supported check.
  crypto: aesni - fix "by8" variant for 128 bit keys

Include rcupdate.h header to provide call_rcu() definition. This was implicitly
being provided by slab.h file which include srcu.h somewhere in its include
hierarchy which in-turn included rcupdate.h.

Lately, tinification effort added support to remove srcu entirely because of
which we are encountering build errors like

lib/assoc_array.c: In function 'assoc_array_apply_edit':
lib/assoc_array.c:1426:2: error: implicit declaration of function 'call_rcu' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors

Fix these by including rcupdate.h explicitly.
Signed-off-by: NPranith Kumar <bobby.prani@gmail.com>
Reported-by: NScott Wood <scottwood@freescale.com>

commit 8b38694a
    vhost/net: virtio 1.0 byte swap
had this chunk:
-       heads[headcount - 1].len += datalen;
+       heads[headcount - 1].len = cpu_to_vhost32(vq, len - datalen);

This adds datalen with the wrong sign, causing guest panics.

Fixes: 8b38694aReported-by: NAlex Williamson <alex.williamson@redhat.com>
Suggested-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Currently disable_irq() doesn't work for pinctrl-st driver, due to
missing irq_disable hook in the driver.
disable_irq() is required only for level-triggered interrupts, which
is not the case normally.
Signed-off-by: NPankaj Dev <pankaj.dev@st.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Using the sysfs inteface to inspect the pins configuration
the system can walk around a path which acquires the same
mutex twice.

On STiH407 platform, for example :
cat /sys/kernel/debug/pinctrl/920f080.pin-controller-front0/pinconf-pins
hangs the kernel and never returns.

With this patch the mutex is temporary freed.
Signed-off-by: NFrancesco Virlinzi <francesco.virlinzi@st.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Pull networking fixes from David Miller:
 "Just a pile of random fixes, including:

   1) Do not apply TSO limits to non-TSO packets, fix from Herbert Xu.

   2) MDI{,X} eeprom check in e100 driver is reversed, from John W.
      Linville.

   3) Missing error return assignments in several ethernet drivers, from
      Julia Lawall.

   4) Altera TSE device doesn't come back up after ifconfig down/up
      sequence, fix from Kostya Belezko.

   5) Add more cases to the check for whether the qmi_wwan device has a
      bogus MAC address and needs to be assigned a random one.  From
      Kristian Evensen.

   6) Fix interrupt hangs in CPSW, from Felipe Balbi.

   7) Implement ndo_features_check in r8152 so that the stack doesn't
      feed GSO packets which are outside of the chip's capabilities.
      From Hayes Wang"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
  qla3xxx: don't allow never end busy loop
  xen-netback: fixing the propagation of the transmit shaper timeout
  r8152: support ndo_features_check
  batman-adv: fix potential TT client + orig-node memory leak
  batman-adv: fix multicast counter when purging originators
  batman-adv: fix counter for multicast supporting nodes
  batman-adv: fix lock class for decoding hash in network-coding.c
  batman-adv: fix delayed foreign originator recognition
  batman-adv: fix and simplify condition when bonding should be used
  Revert "mac80211: Fix accounting of the tailroom-needed counter"
  net: ethernet: cpsw: fix hangs with interrupts
  enic: free all rq buffs when allocation fails
  qmi_wwan: Set random MAC on devices with buggy fw
  openvswitch: Consistently include VLAN header in flow and port stats.
  tcp: Do not apply TSO segment limit to non-TSO packets
  Altera TSE: Add missing phydev
  net/mlx4_core: Fix error flow in mlx4_init_hca()
  net/mlx4_core: Correcly update the mtt's offset in the MR re-reg flow
  qlcnic: Fix return value in qlcnic_probe()
  net: axienet: fix error return code
  ...

Pull IPMI fixlet from Corey Minyard:
 "Fix a compile warning"

* tag 'for-linus-3' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: Fix compile warning with tv_usec

The counter variable wasn't increased at all which may stuck under
certain circumstances.
Signed-off-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* acpi-pm:
  ACPI / PM: Fix PM initialization for devices that are not present

* acpi-processor:
  ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu()
  ACPI / processor: Convert apic_id to phys_id to make it arch agnostic

* acpi-video:
  ACPI / video: Add disable_native_backlight quirk for Dell XPS15 L521X