The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The use of __constant_<foo> has been unnecessary for quite awhile now.

Make these uses consistent with the rest of the kernel.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

priv is not instantiated at gfar_of_init() time, when
parsing the DT for info on supported HW queues.  Before
the netdev can be allocated, the number of supported
queues must be known.  Because the number of supported
queues depends on device type, move the compatibility
checks before netdev allocation.  Local vars are used
to hold the operation mode info before netdev allocation.
This fixes the null accesses for priv->.., in gfar_of_init.
Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add dumping the tally counter by ethtool.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rf233 and rf231 are sufficiently similar that we can treat
rf233 like rf231.

rf233 is missing some features that rf231 has, but we don't currently
make use of them so there's nothing to handle differently yet.

Should we add support in the future for rf231 *_NOCLK or SLEEP states,
or PAD_IO drive strength, exceptions will need to be made for rf233.
Signed-off-by: NThomas Stilwell <stilwellt@openlabs.co>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
pkt_sched: allow scheduling points

We have seen delays of more than 50ms in class or qdisc dumps, in case
device is under high TX stress, even with the prior 4KB per skb limit.

With the new 16KB limit, this could translate to 200ms delays.

Add cond_resched() to give a chance to higher prio tasks to get cpu.

But before doing so, we need to remove the rcu locking from tc_dump_qdisc()
as David spotted.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have seen delays of more than 50ms in class or qdisc dumps, in case
device is under high TX stress, even with the prior 4KB per skb limit.

Add cond_resched() to give a chance to higher prio tasks to get cpu.

Signed-off-by; Eric Dumazet <edumazet@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like all rtnetlink dump operations, we hold RTNL in tc_dump_qdisc(),
so we do not need to use rcu protection to protect list of netdevices.

This will allow preemption to occur, thus reducing latencies.
Following patch adds explicit cond_resched() calls.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The option code is taking IP address and putting it into a generic
container. Force cast to silence sparse warnings.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes sparse warnings in vlan driver.
It propagates the sparse __percpu attribute from alloc_percpu
into netdev_alloc_pcpu_stats. I expect it may trigger additional
sparse warnings from other drivers that are missing the __percpu
attribute.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Acked-by: NCong Wang <cwang@twopensource.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Packets which have L2 address different from ours should be
already filtered before entering into ip6_forward().

Perform that check at the beginning to avoid processing such packets.
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Call skb_cow_head() before editing the tx packet header. The header
would be reallocated if it is shared.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of using an own copy of struct net_device_stats in struct
cpsw_priv, use stats from struct net_device. Also remove the thus
unnecessary .ndo_get_stats function, as it just returns dev->stats,
which is the default.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is not legal to create multiple kmem_cache having the same name.

flowcache can use a single kmem_cache, no need for a per netns
one.

Fixes: ca925cf1 ("flowcache: Make flow cache name space aware")
Reported-by: NJakub Kicinski <moorray3@wp.pl>
Tested-by: NJakub Kicinski <moorray3@wp.pl>
Tested-by: NFan Du <fan.du@windriver.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We do not need to switch the net_ns if the target net_ns the same
as the current one, so here we add a pre-check of net_ns to avoid
this as David suggested.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All skb in socket write queue should be properly timestamped.

In case of FastOpen, we special case the SYN+DATA 'message' as we
queue in socket wrote queue the two fallback skbs:

1) SYN message by itself.
2) DATA segment by itself.

We should make sure these skbs have proper timestamps.

Add a WARN_ON_ONCE() to eventually catch future violations.

Fixes: 740b0f18 ("tcp: switch rtt estimations to usec resolution")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Due to a bug in the Hyper-V host verion 2008R2, we need to use a slightly smaller
receive buffer size, otherwise the buffer will not be accepted by the legacy hosts.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Correct offset is 3 of the 6lowpanfrag_max_datagram_size value in proc
entry ctl table and not 2.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

K. Y. Srinivasan says:

====================
Drivers: net: hyperv: Enable various offloads

This patch set enables both checksum as well as segmentation offload.
As part of this effort I have enabled scatter gather I/O a well.

In version 2 of these patches, I addressed comments from David Miller and
Dan Carpenter.

In this version I have addressed the latest comments from David Miller.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable segmentation offload.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable send side checksum offload.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable receive side checksum offload.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prior to enabling guest side offloads, enable the offloads on the host.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for enabling offloads, cleanup the send path.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cleanup the code and enable scatter gather I/O.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver reads the mac address from the device registers which would
need to have been programmed by the bootloader.  This patch adds
the ability to pull the mac from devicetree via the pci device dt node.
Signed-off-by: NTim Harvey <tharvey@gateworks.com>
Cc: netdev@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>

Changes since v2:
 - eliminated use of stack tmpaddr per feedback

Changes since v1:
 - simplified based on feedback
 - fixed formatting
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/l2tp/l2tp_core.c:1111:15: warning: unused variable
'sk' [-Wunused-variable]

Fixes: 31c70d59 ("l2tp: keep original skb ownership")
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The call to mlx5_health_cleanup() in the module init function can never
be reached. Removing it.
Signed-off-by: NKleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Acked-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

One known problem with netlink is the fact that NLMSG_GOODSIZE is
really small on PAGE_SIZE==4096 architectures, and it is difficult
to know in advance what buffer size is used by the application.

This patch adds an automatic learning of the size.

First netlink message will still be limited to ~4K, but if user used
bigger buffers, then following messages will be able to use up to 16KB.

This speedups dump() operations by a large factor and should be safe
for legacy applications.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Thomas Graf <tgraf@suug.ch>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Faster than memcpy/memset on some architectures.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Claudiu Manoil says:

====================
gianfar: Tx timeout issue

There's an older Tx timeout issue showing up on etsec2 devices
with 2 CPUs.  I pinned this issue down to processing overhead
incurred by supporting multiple Tx/Rx rings, as explained in
the 2nd patch below.  But before this, there's also a concurency
issue leading to Rx/Tx spurrious interrupts, addressed by the
'Tx NAPI' patch below.
The Tx timeout can be triggered with multiple Tx flows,
'iperf -c -N 8' commands, on a 2 CPUs etsec2 based (P1020) board.

Before the patches:
"""
root@p1020rdb-pc:~# iperf -c 172.16.1.3 -n 1000M -P 8 &
[...]
root@p1020rdb-pc:~# NETDEV WATCHDOG: eth1 (fsl-gianfar): transmit queue 1 timed out
WARNING: at net/sched/sch_generic.c:279
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-rc3-03386-g89ea59c #23
task: ed84ef40 ti: ed868000 task.ti: ed868000
NIP: c04627a8 LR: c04627a8 CTR: c02fb270
REGS: ed869d00 TRAP: 0700   Not tainted  (3.13.0-rc3-03386-g89ea59c)
MSR: 00029000 <CE,EE,ME>  CR: 44000022  XER: 20000000
[...]

root@p1020rdb-pc:~# [ ID] Interval       Transfer     Bandwidth
[  5]  0.0-19.3 sec  1000 MBytes    434 Mbits/sec
[  8]  0.0-39.7 sec  1000 MBytes    211 Mbits/sec
[  9]  0.0-40.1 sec  1000 MBytes    209 Mbits/sec
[  3]  0.0-40.2 sec  1000 MBytes    209 Mbits/sec
[ 10]  0.0-59.0 sec  1000 MBytes    142 Mbits/sec
[  7]  0.0-74.6 sec  1000 MBytes    112 Mbits/sec
[  6]  0.0-74.7 sec  1000 MBytes    112 Mbits/sec
[  4]  0.0-74.7 sec  1000 MBytes    112 Mbits/sec
[SUM]  0.0-74.7 sec  7.81 GBytes    898 Mbits/sec

root@p1020rdb-pc:~# ifconfig eth1
eth1      Link encap:Ethernet  HWaddr 00:04:9f:00:13:01
          inet addr:172.16.1.1  Bcast:172.16.255.255  Mask:255.255.0.0
          inet6 addr: fe80::204:9fff:fe00:1301/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:708722 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8717849 errors:6 dropped:0 overruns:1470 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:58118018 (55.4 MiB)  TX bytes:274069482 (261.3 MiB)
          Base address:0xa000

"""

After applying the patches:
"""
root@p1020rdb-pc:~# iperf -c 172.16.1.3 -n 1000M -P 8 &
[...]
root@p1020rdb-pc:~# [ ID] Interval       Transfer     Bandwidth
[  9]  0.0-70.5 sec  1000 MBytes    119 Mbits/sec
[  5]  0.0-70.5 sec  1000 MBytes    119 Mbits/sec
[  6]  0.0-70.7 sec  1000 MBytes    119 Mbits/sec
[  4]  0.0-71.0 sec  1000 MBytes    118 Mbits/sec
[  8]  0.0-71.1 sec  1000 MBytes    118 Mbits/sec
[  3]  0.0-71.2 sec  1000 MBytes    118 Mbits/sec
[ 10]  0.0-71.3 sec  1000 MBytes    118 Mbits/sec
[  7]  0.0-71.3 sec  1000 MBytes    118 Mbits/sec
[SUM]  0.0-71.3 sec  7.81 GBytes    942 Mbits/sec

root@p1020rdb-pc:~# ifconfig eth1
eth1      Link encap:Ethernet  HWaddr 00:04:9f:00:13:01
          inet addr:172.16.1.1  Bcast:172.16.255.255  Mask:255.255.0.0
          inet6 addr: fe80::204:9fff:fe00:1301/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:728446 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8690057 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:59732650 (56.9 MiB)  TX bytes:271554306 (258.9 MiB)
          Base address:0xa000
"""
v2: PATCH 2:
    Replaced CPP check with run-time condition to
    limit the number of queues. Updated comments.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the "fsl,etsec2" compatible models the driver currently
supports 8 Tx and Rx DMA rings (aka HW queues).  However, there
are only 2 pairs of Rx/Tx interrupt lines, as these controllers
are integrated in low power SoCs with 2 CPUs at most.  As a result,
there are at most 2 NAPI instances that have to service multiple
Tx and Rx queues for these devices.  This complicates the NAPI
polling routine having to iterate over the mutiple Rx/Tx queues
hooked to the same interrupt lines.  And there's also an overhead
at HW level, as the controller needs to service all the 8 Tx rings
in a round robin manner.  The combined overhead shows up for multi
parallel Tx flows transmitted by the kernel stack, when the driver
usually starts returning NETDEV_TX_BUSY leading to NETDEV WATCHDOG
Tx timeout triggering if the Tx path is congested for too long.

As an alternative, this patch makes the driver support only one
Tx/Rx DMA ring per NAPI instance (per interrupt group or pair
of Tx/Rx interrupt lines) by default.  The simplified single queue
polling routine (gfar_poll_sq) will be the default napi poll routine
for the etsec2 devices too.  Some adjustments needed to be made to
link the Tx/Rx HW queues with each NAPI instance (2 in this case).
The gfar_poll_sq() is already successfully used by older SQ_SG_MODE
(single interrupt group) controllers.
This patch fixes Tx timeout triggering under heavy Tx traffic load
(i.e. iperf -c -P 8) for the "fsl,etsec2" (currently the only
MQ_MG_MODE devices).  There's also a significant memory footprint
reduction by supporting 2 Rx/Tx DMA rings (at most), instead of 8,
for these devices.
Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are some concurrency issues on devices w/ 2 CPUs related
to the handling of Rx and Tx interrupts.  eTSEC has separate
interrupt lines for Rx and Tx but a single imask register
to mask these interrupts and a single NAPI instance to handle
both Rx and Tx work.  As a result, the Rx and Tx ISRs are
identical, both are invoking gfar_schedule_cleanup(), however
both handlers can be entered at the same time when the Rx and
Tx interrupts are taken by different CPUs.  In this case
spurrious interrupts (SPU) show up (in /proc/interrupts)
indicating a concurrency issue.  Also, Tx overruns followed
by Tx timeout have been observed under heavy Tx traffic load.

To address these issues, the schedule cleanup ISR part has
been changed to handle the Rx and Tx interrupts independently.
The patch adds a separate NAPI poll routine for Tx cleanup to
be triggerred independently by the Tx confirmation interrupts
only.  Existing poll functions are modified to handle only
the Rx path processing.  The Tx poll routine does not need a
budget, since Tx processing doesn't consume NAPI budget, and
hence it is registered with minimum NAPI weight.
NAPI scheduling does not require locking since there are
different NAPI instances between the Rx and Tx confirmation
paths now.
So, the patch fixes the occurence of spurrious Rx/Tx interrupts.
Tx overruns also occur less frequently now.
Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ether_addr_equal_64bits is more efficient than ether_addr_equal, and
can be used when each argument is an array within a structure that
contains at least two bytes of data beyond the array, so it is safe
to use it for vlan, and make sense for fast path.

Cc: Joe Perches <joe@perches.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According Joe's suggestion, maybe it'd be faster to add an unlikely to
the test for PCKET_OTHERHOST, so I add it and see whether the performance
could be better, although the differences is so small and negligible, but
it is hard to catch that any lower device would set the skb type to
PACKET_OTHERHOST, so most of time, I think it make sense to add unlikely
for the test.

Cc: Joe Perches <joe@perches.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Resizing fq hash table allocates memory while holding qdisc spinlock,
with BH disabled.

This is definitely not good, as allocation might sleep.

We can drop the lock and get it when needed, we hold RTNL so no other
changes can happen at the same time.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>