Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Tuner setup were happening during i2c attach callback. This means that it would
happen on two conditions:

        1) if tuner module weren't load, it will happen at request_module("tuner");

        2) if tuner is not compiled as a module, or it is already loaded
           (for example, on setups with more than one tuner), it will happen
           when saa7134 registers I2C bus.

Due to that, if tuner were loaded, tuner setup will happen _before_ reading
the proper values at tuner eeprom. Since set_addr refuses to change for a tuner
that were previously defined (except if the tuner_addr is set), this were
making eeprom tuner detection useless.

This patch removes tuner type setup from saa7134-i2c, moving it to the proper
place, after taking eeprom into account.
Reviewed-by: NHermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Tuner setup were happening during i2c attach callback. This means that it would
happen on two conditions:

	1) if tuner module weren't load, it will happen at request_module("tuner");

	2) if tuner is not compiled as a module, or it is already loaded
	   (for example, on setups with more than one tuner), it will happen
	   when cx88 registers I2C bus.

Due to that, if tuner were loaded, tuner setup will happen _before_ reading
the proper values at tuner eeprom. Since set_addr refuses to change for a tuner
that were previously defined (except if the tuner_addr is set), this were making
eeprom tuner detection useless.

This patch removes tuner type setup from cx88-i2c, moving it to the proper
place, after taking eeprom into account.
Reviewed-by: NGert Vervoort <gert.vervoort@hccnet.nl>
Reviewed-by: NIan Pickworth <ian@pickworth.me.uk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

spin_is_locked() doesn't work on UP without spinlock debugging. Make it
safer and just return 1 on UP, so we don't get false positives. The plan
is to kill this debug function during the -rc cycle.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Yeah, in practice they both mean "root", but Alan correctly points out
that anybody who gets to do raw IO space accesses should really be using
CAP_SYS_RAWIO rather than CAP_NET_ADMIN.
Pointed-out-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'audit.b50' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] new predicate - AUDIT_FILETYPE
  [patch 2/2] Use find_task_by_vpid in audit code
  [patch 1/2] audit: let userspace fully control TTY input auditing
  [PATCH 2/2] audit: fix sparse shadowed variable warnings
  [PATCH 1/2] audit: move extern declarations to audit.h
  Audit: MAINTAINERS update
  Audit: increase the maximum length of the key field
  Audit: standardize string audit interfaces
  Audit: stop deadlock from signals under load
  Audit: save audit_backlog_limit audit messages in case auditd comes back
  Audit: collect sessionid in netlink messages
  Audit: end printk with newline

argh.  A hunk got lost from "proc: remove proc_bus"
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dm.c already provides mutual exclusion through ->map_lock.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (21 commits)
  pciehp: fix error message about getting hotplug control
  pci/irq: let pci_device_shutdown to call pci_msi_shutdown v2
  pci/irq: restore mask_bits in msi shutdown -v3
  doc: replace yet another dev with pdev for consistency in DMA-mapping.txt
  PCI: don't expose struct pci_vpd to userspace
  doc: fix an incorrect suggestion to pass NULL for PCI like buses
  Consistently use pdev as the variable of type struct pci_dev *.
  pciehp: Fix command write
  shpchp: fix slot name
  make pciehp_acpi_get_hp_hw_control_from_firmware()
  pciehp: Clean up pcie_init()
  pciehp: Mask hotplug interrupt at controller release
  pciehp: Remove useless hotplug interrupt enabling
  pciehp: Fix wrong slot capability check
  pciehp: Fix wrong slot control register access
  pciehp: Add missing memory barrier
  pciehp: Fix interrupt event handlig
  pciehp: fix slot name
  Update MAINTAINERS with location of PCI tree
  PCI: Add Intel SCH PCI IDs
  ...

The new queue_flag_set/clear() functions verify that the queue is
locked, but in doing so they will actually instead oops if the queue
lock hasn't been initialized at all.

So fix the lock debug test to consider the "no lock" case to be
unlocked.  This way you get a nice WARN_ON_ONCE() instead of a fatal
oops.

Bug introduced by commit 75ad23bc
("block: make queue flags non-atomic").

Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  [ALSA] soc - wm9712 - checkpatch fixes
  [ALSA] pcsp - Fix more dependency
  [ALSA] hda - Add support of Medion RIM 2150
  [ALSA] ASoC: Add drivers for the Texas Instruments OMAP processors
  [ALSA] ice1724 - Enable watermarks
  [ALSA] Add MPU401_INFO_NO_ACK bitflag

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the missing dependency and select for snd-pcsp driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the support of Medion RIM 2150 laptop with ALC880 codec.
ALSA bug#3708:
	https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3708Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add common OMAP ASoC drivers and machine driver for Nokia N810. Currently
supported features are:

- Covers OMAPs from 1510 to 2420
- Common DMA driver
- DAI link driver using McBSP port in I2S mode
- Basic machine driver for Nokia N810
Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Enable watermarks settings (previously commented out) for MPU RX/TX.
Otherwise irqs aren't issued properly.
Tested-by: NPavel Hofman <pavel.hofman@insite.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added MPU401_INFO_NO_ACK bitflag to ignore the ACK check for UART
commands.  VT172x doesn't handle ACK commands, for example.
Tested-by: NPavel Hofman <pavel.hofman@insite.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

People are confused by the following error message that actually is
not for indicating a error.

    Cannot get control of hotplug hardware for pci %s

This patch changes this message to debug message.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@hobbes.lan>

[PATCH 2/2] pci/irq: let pci_device_shutdown to call pci_msi_shutdown v2

this change

| commit 23a274c8
| Author: Prakash, Sathya <sathya.prakash@lsi.com>
| Date:   Fri Mar 7 15:53:21 2008 +0530
|
|     [SCSI] mpt fusion: Enable MSI by default for SAS controllers
|
|     This patch modifies the driver to enable MSI by default for all SAS chips.
|
|     Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
|     Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
Causes the kexec of a RHEL 5.1 kernel to fail.

root casue: the rhel 5.1 kernel still uses INTx emulation.  and
mptscsih_shutdown doesn't call pci_disable_msi to reenable INTx on kexec path

So call pci_msi_shutdown in the shutdown path to do the same thing to msix
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NJesse Barnes <jbarnes@hobbes.lan>

[PATCH 1/2] pci/irq: restore mask_bits in msi shutdown -v3

Yinghai found that kexec'ing a RHEL 5.1 kernel with 2.6.25-rc3+ kernels
prevents his NIC from working.  He bisected to

| commit 89d694b9
| Author: Thomas Gleixner <tglx@linutronix.de>
| Date:   Mon Feb 18 18:25:17 2008 +0100
|
|   genirq: do not leave interupts enabled on free_irq
|
|   The default_disable() function was changed in commit:
|
|    76d21601
|    genirq: do not mask interrupts by default
|

For MSI, default_shutdown will call mask_bit for msi device.  All mask bits
will left disabled after free_irq.  Then in the kexec case, the next kernel
can only use msi_enable bit, so all device's MSI can not be used.

So lets to restore the mask bit to its pci reset defined value (enabled) when
we disable the kernels use of msi to be a little friendlier to kexec'd kernels.

Extend msi_set_mask_bit to msi_set_mask_bits to take mask, so we can fully
restore that to 0x00 instead of 0xfe.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NJesse Barnes <jbarnes@hobbes.lan>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes:
  x86: fix PCI MSI breaks when booting with nosmp
  x86: vget_cycles() __always_inline
  x86: add more boot protocol documentation
  bootprotocol: cleanup
  x86: fix warning in "x86: clean up vSMP detection"
  x86: !x & y typo in mtrr code

Replace "dev" with "pdev" for consistency in DMA-mapping.txt.
Signed-off-by: NMatti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: NJesse Barnes <jbarnes@hobbes.lan>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared" (v2)
  sata_mv: Improve naming of main_irq cause/mask identifiers
  libata-scsi: improve rbuf handling for simulated commands
  libata-scsi: clean up inquiry / mode sense related functions
  [MIPS] ATA: Rename routerboard 500 to 532

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-pci

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-pci:
  x86: add pci=check_enable_amd_mmconf and dmi check
  x86: work around io allocation overlap of HT links
  acpi: get boot_cpu_id as early for k8_scan_nodes
  x86_64: don't need set default res if only have one root bus
  x86: double check the multi root bus with fam10h mmconf
  x86: multi pci root bus with different io resource range, on 64-bit
  x86: use bus conf in NB conf fun1 to get bus range on, on 64-bit
  x86: get mp_bus_to_node early
  x86 pci: remove checking type for mmconfig probe
  x86: remove unneeded check in mmconf reject
  driver core: try parent numa_node at first before using default
  x86: seperate mmconf for fam10h out from setup_64.c
  x86: if acpi=off, force setting the mmconf for fam10h
  x86_64: check MSR to get MMCONFIG for AMD Family 10h
  x86_64: check and enable MMCONFIG for AMD Family 10h
  x86_64: set cfg_size for AMD Family 10h in case MMCONFIG
  x86: mmconf enable mcfg early
  x86: clear pci_mmcfg_virt when mmcfg get rejected
  x86: validate against acpi motherboard resources

Fixed up fairly trivial conflicts in arch/x86/pci/{init.c,pci.h} due to
OLPC support manually.

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [RAPIDIO] Change RapidIO doorbell source and target ID field to 16-bit
  [RAPIDIO] Add RapidIO connection info print out and re-training for broken connections
  [RAPIDIO] Add serial RapidIO controller support, which includes MPC8548, MPC8641
  [RAPIDIO] Add RapidIO node probing into MPC86xx_HPCN board id table
  [RAPIDIO] Add RapidIO node into MPC8641HPCN dts file
  [RAPIDIO] Auto-probe the RapidIO system size
  [RAPIDIO] Add OF-tree support to RapidIO controller driver
  [RAPIDIO] Add RapidIO multi mport support
  [RAPIDIO] Move include/asm-ppc/rio.h to asm-powerpc
  [RAPIDIO] Add RapidIO option to kernel configuration
  [RAPIDIO] Change RIO function mpc85xx_ to fsl_
  [POWERPC] Provide walk_memory_resource() for powerpc
  [POWERPC] Update lmb data structures for hotplug memory add/remove
  [POWERPC] Hotplug memory remove notifications for powerpc
  [POWERPC] windfarm: Add PowerMac 12,1 support
  [POWERPC] Fix building of pmac32 when CONFIG_NVRAM=m
  [POWERPC] Add IRQSTACKS support on ppc32
  [POWERPC] Use __always_inline for xchg* and cmpxchg*
  [POWERPC] Add fast little-endian switch system call

* git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] state info wrong after resume
  [CPUFREQ] allow use of the powersave governor as the default one
  [CPUFREQ] document the currently undocumented parts of the sysfs interface
  [CPUFREQ] expose cpufreq coordination requirements regardless of coordination mechanism

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: Skip I/O merges when disabled
  block: add large command support
  block: replace sizeof(rq->cmd) with BLK_MAX_CDB
  ide: use blk_rq_init() to initialize the request
  block: use blk_rq_init() to initialize the request
  block: rename and export rq_init()
  block: no need to initialize rq->cmd with blk_get_request
  block: no need to initialize rq->cmd in prepare_flush_fn hook
  block/blk-barrier.c:blk_ordered_cur_seq() mustn't be inline
  block/elevator.c:elv_rq_merge_ok() mustn't be inline
  block: make queue flags non-atomic
  block: add dma alignment and padding support to blk_rq_map_kern
  unexport blk_max_pfn
  ps3disk: Remove superfluous cast
  block: make rq_init() do a full memset()
  relay: fix splice problem

The mapsize optimizations which were moved from x86 to the generic
code in commit 64970b68 increased the
binary size on non x86 architectures.

Looking into the real effects of the "optimizations" it turned out
that they are not used in find_next_bit() and find_next_zero_bit().

The ones in find_first_bit() and find_first_zero_bit() are used in a
couple of places but none of them is a real hot path.

Remove the "optimizations" all together and call the library functions
unconditionally.

Boot-tested on x86 and compile tested on every cross compiler I have.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Miles Bader <miles@gnu.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

New version that does not preserve the marker. Arch maintainers indicate
that the marker functionality is is not needed anymore.

Note you may simplify the s390 asm-offsets.c code further if you use the
OFFSET() macro instead of the DEFINE. See kbuild.h
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

s390 has a strange marker in DEFINE.  Undefine the DEFINE from kbuild.h and
define it the way s390 wants it to preserve things as they were.

May be good if the arch maintainer could go over this and check if this
workaround is really necessary.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>