* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: Skip check for mandatory locks when unlocking
  9p: Fixes a simple bug enabling writes beyond 2GB.
  9p: Change the name of new protocol from 9p2010.L to 9p2000.L
  fs/9p: re-init the wstat in readdir loop
  net/9p: Add sysfs mount_tag file for virtio 9P device
  net/9p: Use the tag name in the config space for identifying mount point

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Add very basic XVR-1000 framebuffer driver.
  qlogicpti: Remove slash in QlogicPTI irq name

Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NFrans van Berckel <fberckel@xs4all.nl>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (108 commits)
  bridge: ensure to unlock in error path in br_multicast_query().
  drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages
  sky2: Avoid rtnl_unlock without rtnl_lock
  ipv6: Send netlink notification when DAD fails
  drivers/net/tg3.c: change the field used with the TG3_FLAG_10_100_ONLY constant
  ipconfig: Handle devices which take some time to come up.
  mac80211: Fix memory leak in ieee80211_if_write()
  mac80211: Fix (dynamic) power save entry
  ipw2200: use kmalloc for large local variables
  ath5k: read eeprom IQ calibration values correctly for G mode
  ath5k: fix I/Q calibration (for real)
  ath5k: fix TSF reset
  ath5k: use fixed antenna for tx descriptors
  libipw: split ieee->networks into small pieces
  mac80211: Fix sta_mtx unlocking on insert STA failure path
  rt2x00: remove KSEG1ADDR define from rt2x00soc.h
  net: add ColdFire support to the smc91x driver
  asix: fix setting mac address for AX88772
  ipv6 ip6_tunnel: eliminate unused recursion field from ip6_tnl{}.
  net: Fix dev_mc_add()
  ...

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix pick_next_highest_task_rt() for cgroups
  sched: Cleanup: remove unused variable in try_to_wake_up()
  x86: Fix sched_clock_cpu for systems with unsynchronized TSC

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, k8 nb: Fix boot crash: enable k8_northbridges unconditionally on AMD systems
  x86, UV: Fix target_cpus() in x2apic_uv_x.c
  x86: Reduce per cpu warning boot up messages
  x86: Reduce per cpu MCA boot up messages
  x86_64, cpa: Don't work hard in preserving kernel 2M mappings when using 4K already

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  locking: Make sparse work with inline spinlocks and rwlocks
  x86/mce: Fix RCU lockdep splats
  rcu: Increase RCU CPU stall timeouts if PROVE_RCU
  ftrace: Replace read_barrier_depends() with rcu_dereference_raw()
  rcu: Suppress RCU lockdep warnings during early boot
  rcu, ftrace: Fix RCU lockdep splat in ftrace_perf_buf_prepare()
  rcu: Suppress __mpol_dup() false positive from RCU lockdep
  rcu: Make rcu_read_lock_sched_held() handle !PREEMPT
  rcu: Add control variables to lockdep_rcu_dereference() diagnostics
  rcu, cgroup: Relax the check in task_subsys_state() as early boot is now handled by lockdep-RCU
  rcu: Use wrapper function instead of exporting tasklist_lock
  sched, rcu: Fix rcu_dereference() for RCU-lockdep
  rcu: Make task_subsys_state() RCU-lockdep checks handle boot-time use
  rcu: Fix holdoff for accelerated GPs for last non-dynticked CPU
  x86/gart: Unexport gart_iommu_aperture

Fix trivial conflicts in kernel/trace/ftrace.c

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Do not record user stack trace from NMI context
  tracing: Disable buffer switching when starting or stopping trace
  tracing: Use same local variable when resetting the ring buffer
  function-graph: Init curr_ret_stack with ret_stack
  ring-buffer: Move disabled check into preempt disable section
  function-graph: Add tracing_thresh support to function_graph tracer
  tracing: Update the comm field in the right variable in update_max_tr
  function-graph: Use comment notation for func names of dangling '}'
  function-graph: Fix unused reference to ftrace_set_func()
  tracing: Fix warning in s_next of trace file ops
  tracing: Include irqflags headers from trace clock

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Sound MSI fallout on a Asus mobo NVIDIA MCP55
  sound: fix opti92x-ad1848 build
  ALSA: hda - Fix input source elements of secondary ADCs on Realtek
  ALSA: hda - Fix wrong model range check for ALC268

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Provide generic perf_sample_data initialization
  MAINTAINERS: Add Arnaldo as tools/perf/ co-maintainer
  perf trace: Don't use pager if scripting
  perf trace/scripting: Remove extraneous header read
  perf, ARM: Modify kuser rmb() call to compile for Thumb-2
  x86/stacktrace: Don't dereference bad frame pointers
  perf archive: Don't try to collect files without a build-id
  perf_events, x86: Fixup fixed counter constraints
  perf, x86: Restrict the ANY flag
  perf, x86: rename macro in ARCH_PERFMON_EVENTSEL_ENABLE
  perf, x86: add some IBS macros to perf_event.h
  perf, x86: make IBS macros available in perf_event.h
  hw-breakpoints: Remove stub unthrottle callback
  x86/hw-breakpoints: Remove the name field
  perf: Remove pointless breakpoint union
  perf lock: Drop the buffers multiplexing dependency
  perf lock: Fix and add misc documentally things
  percpu: Add __percpu sparse annotations to hw_breakpoint

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Skip check for mandatory locks when unlocking
  GFS2: Allow the number of committed revokes to temporarily be negative
  GFS2: do not select QUOTA

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix CX4 link problem in back-to-back configuration
  RDMA/nes: Clear stall bit before destroying NIC QP
  RDMA/nes: Set assume_aligned_header bit
  RDMA/cxgb3: Wait at least one schedule cycle during device removal
  IB/mad: Ignore iWARP devices on device removal
  IPoIB: Include return code in trace message for ib_post_send() failures
  IPoIB: Fix TX queue lockup with mixed UD/CM traffic

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On Wed, 2010-03-10 at 08:41 -0800, David Miller wrote:
> From: Mikael Pettersson <mikpe@it.uu.se>
> Date: Wed, 10 Mar 2010 16:33:28 +0100
> > Booting 2.6.34-rc1 on a machine with a tulip nic I see
> > a number of kernel messages that include "(null)" where
> > previous kernels included the string "tulip0":
> CC:'ing the guilty party :-)  It's one of the following
> commits:

Thanks Mikael.

Anonymity has some good attributes.
Blame avoidance is one of them.

I've broad shoulders.  It's me, then Dwight Howard...

There might be another few of these where ->name or ->dev
was used before struct device or net_device was registered.
I'll go back and check.

tulip_core has:

	if (tp->flags & HAS_MEDIA_TABLE) {
		sprintf(dev->name, DRV_NAME "%d", board_idx);	/* hack */
		tulip_parse_eeprom(dev);
		strcpy(dev->name, "eth%d");			/* un-hack */
	}

So I don't feel _too_ bad.

tulip_parse_eeprom is done before register_netdev so the logging
there can not use netdev_<level> or dev_<level>(&dev->dev
Signed-off-by: NJoe Perches <joe@perches.com>
Tested-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make sure we always call rtnl_lock before going down the
error path in sky2_resume, which unlocks the rtnl lock.
Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we are managing IPv6 addresses using DHCP, it would be nice
for user-space to be notified if an address configured through
DHCP fails DAD.  Otherwise user-space would have to poll to see
whether DAD succeeds.

This patch uses the existing notification mechanism and simply
hooks it into the DAD failure code path.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The constant TG3_FLAG_10_100_ONLY should be used with the tg3_flags field,
not the tg3_flags2 field, as done elsewhere in the same file.
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While investigating a bug, I came across a possible bug in v9fs. The
problem is similar to the one reported for NFS by ASANO Masahiro in
http://lkml.org/lkml/2005/12/21/334.

v9fs_file_lock() will skip locks on file which has mode set to 02666.
This is a problem in cases where the mode of the file is changed after
a process has obtained a lock on the file. Such a lock will be skipped
during unlock and the machine will end up with a BUG in
locks_remove_flock().

v9fs_file_lock() should skip the check for mandatory locks when
unlocking a file.
Signed-off-by: NSachin Prabhu <sprabhu@redhat.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Fixes a simple bug so that large files beyond 2GB can be created.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This patch changes the name of the new 9P protocol from 9p2010.L to
9p2000.u. This is because we learnt that the name 9p2010 is already
being used by others.
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This ensure that on failure when we free the stat buf we don't end up
freeing an already freed pointer in the earlier loop
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NSripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This adds a new file for virtio 9P device. The file
contain details of the mount device name that should
be used to mount the 9P file system.

Ex: /sys/devices/virtio-pci/virtio1/mount_tag  file now
contian the tag name to be used to mount the 9P file system.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

This patch use the tag name in the config space to identify the
mount device. The the virtio device name depend on the enumeration
order of the device and may not remain the same across multiple boots
So we use the tag name which is set via qemu option to uniquely identify
the mount device
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

de957628 changed setting of the
x86_init.iommu.iommu_init function ptr only when GART IOMMU is
found.

One side effect of it is that num_k8_northbridges
is not initialized anymore if not explicitly
called. This resulted in uninitialized pointers in
<arch/x86/kernel/cpu/intel_cacheinfo.c:amd_calc_l3_indices()>,
for example, which uses the num_k8_northbridges thing through
node_to_k8_nb_misc().

Fix that through an initcall that runs right after the PCI
subsystem and does all the scanning. Then, remove initialization
in gart_iommu_init() which is a rootfs_initcall and we're
running before that.

What is more, since num_k8_northbridges is being used in other
places beside GART IOMMU, include it whenever we add AMD CPU
support. The previous dependency chain in kconfig contained

K8_NB depends on AGP_AMD64|GART_IOMMU

which was clearly incorrect. The more natural way in terms of
hardware dependency should be

AGP_AMD64|GART_IOMMU depends on K8_NB depends on CPU_SUP_AMD &&
PCI. Make it so Number One!
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Joerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <20100312144303.GA29262@aftab>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Tested-by: NJoerg Roedel <joerg.roedel@amd.com>

A bug was found with Li Zefan's ftrace_stress_test that caused applications
to segfault during the test.

Placing a tracing_off() in the segfault code, and examining several
traces, I found that the following was always the case. The lock tracer
was enabled (lockdep being required) and userstack was enabled. Testing
this out, I just enabled the two, but that was not good enough. I needed
to run something else that could trigger it. Running a load like hackbench
did not work, but executing a new program would. The following would
trigger the segfault within seconds:

  # echo 1 > /debug/tracing/options/userstacktrace
  # echo 1 > /debug/tracing/events/lock/enable
  # while :; do ls > /dev/null ; done

Enabling the function graph tracer and looking at what was happening
I finally noticed that all cashes happened just after an NMI.

 1)               |    copy_user_handle_tail() {
 1)               |      bad_area_nosemaphore() {
 1)               |        __bad_area_nosemaphore() {
 1)               |          no_context() {
 1)               |            fixup_exception() {
 1)   0.319 us    |              search_exception_tables();
 1)   0.873 us    |            }
[...]
 1)   0.314 us    |  __rcu_read_unlock();
 1)   0.325 us    |    native_apic_mem_write();
 1)   0.943 us    |  }
 1)   0.304 us    |  rcu_nmi_exit();
[...]
 1)   0.479 us    |  find_vma();
 1)               |  bad_area() {
 1)               |    __bad_area() {

After capturing several traces of failures, all of them happened
after an NMI. Curious about this, I added a trace_printk() to the NMI
handler to read the regs->ip to see where the NMI happened. In which I
found out it was here:

ffffffff8135b660 <page_fault>:
ffffffff8135b660:       48 83 ec 78             sub    $0x78,%rsp
ffffffff8135b664:       e8 97 01 00 00          callq  ffffffff8135b800 <error_entry>

What was happening is that the NMI would happen at the place that a page
fault occurred. It would call rcu_read_lock() which was traced by
the lock events, and the user_stack_trace would run. This would trigger
a page fault inside the NMI. I do not see where the CR2 register is
saved or restored in NMI handling. This means that it would corrupt
the page fault handling that the NMI interrupted.

The reason the while loop of ls helped trigger the bug, was that
each execution of ls would cause lots of pages to be faulted in, and
increase the chances of the race happening.

The simple solution is to not allow user stack traces in NMI context.
After this patch, I ran the above "ls" test for a couple of hours
without any issues. Without this patch, the bug would trigger in less
than a minute.

Cc: stable@kernel.org
Reported-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When the trace iterator is read, tracing_start() and tracing_stop()
is called to stop tracing while the iterator is processing the trace
output.

These functions disable both the standard buffer and the max latency
buffer. But if the wakeup tracer is running, it can switch these
buffers between the two disables:

  buffer = global_trace.buffer;
  if (buffer)
      ring_buffer_record_disable(buffer);

      <<<--------- swap happens here

  buffer = max_tr.buffer;
  if (buffer)
      ring_buffer_record_disable(buffer);

What happens is that we disabled the same buffer twice. On tracing_start()
we can enable the same buffer twice. All ring_buffer_record_disable()
must be matched with a ring_buffer_record_enable() or the buffer
can be disable permanently, or enable prematurely, and cause a bug
where a reset happens while a trace is commiting.

This patch protects these two by taking the ftrace_max_lock to prevent
a switch from occurring.

Found with Li Zefan's ftrace_stress_test.

Cc: stable@kernel.org
Reported-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In the ftrace code that resets the ring buffer it references the
buffer with a local variable, but then uses the tr->buffer as the
parameter to reset. If the wakeup tracer is running, which can
switch the tr->buffer with the max saved buffer, this can break
the requirement of disabling the buffer before the reset.

   buffer = tr->buffer;
   ring_buffer_record_disable(buffer);
   synchronize_sched();
   __tracing_reset(tr->buffer, cpu);

If the tr->buffer is swapped, then the reset is not happening to the
buffer that was disabled. This will cause the ring buffer to fail.

Found with Li Zefan's ftrace_stress_test.

Cc: stable@kernel.org
Reported-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If the graph tracer is active, and a task is forked but the allocating of
the processes graph stack fails, it can cause crash later on.

This is due to the temporary stack being NULL, but the curr_ret_stack
variable is copied from the parent. If it is not -1, then in
ftrace_graph_probe_sched_switch() the following:

	for (index = next->curr_ret_stack; index >= 0; index--)
		next->ret_stack[index].calltime += timestamp;

Will cause a kernel OOPS.

Found with Li Zefan's ftrace_stress_test.

Cc: stable@kernel.org
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The ring buffer resizing and resetting relies on a schedule RCU
action. The buffers are disabled, a synchronize_sched() is called
and then the resize or reset takes place.

But this only works if the disabling of the buffers are within the
preempt disabled section, otherwise a window exists that the buffers
can be written to while a reset or resize takes place.

Cc: stable@kernel.org
Reported-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B949E43.2010906@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Several MFD drivers should depend on GENERIC_HARDIRQS
  mfd: Fix sm501 requested region size

* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
  fat: Fix stat->f_namelen
  fat: Fix vfat_lookup()

Some of the gitignore file patters were explicitly meant to be only for
the top level, but weren't marked that way, so they would trigger
recursively in subdirectories too.  Normally that was harmless, but at
least "linux" happened to trigger elsewhere too. Fix it up.

And other patterns in that section weren't necessarily top-level at all.
Reported-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timekeeping: Prevent oops when GENERIC_TIME=n

Inotify was switched to use anon_inode instead of its own private filesystem
which only had one inode in commit c44dcc56 "switch inotify_user to
anon_inode"

The problem with this is that now the inotify inode is not a distinct inode
which can be managed by LSMs.  userspace tools which use inotify were allowed
to use the inotify inode but may not have had permission to do read/write type
operations on the anon_inode.  After looking at the anon_inode and its users
it looks like the best solution is to just mark the anon_inode as S_PRIVATE
so the security system will ignore it.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: use ext2_find_next_bit
  udf: Do not read inode before writing it
  udf: Fix unalloc space handling in udf_update_inode

* 'msm-mmc_sdcc' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
  msm_sdcc.c: missing brackets in msmsdcc_resume()

Currently sparse does not work with inline spinlock and rwlock functions. 
The problem is that they do not use the __acquires/__releases out-of-line
functions, but use inline functions with no sparse annotations.

This patch adds the appropriate annotations to make it work properly.
Signed-off-by: NLuca Barbieri <luca@luca-barbieri.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/booke: Fix breakpoint/watchpoint one-shot behavior
  powerpc: Reduce printk from pseries_mach_cpu_die()
  powerpc: Move checks in pseries_mach_cpu_die()
  powerpc: Reset kernel stack on cpu online from cede state
  powerpc: Fix G5 thermal shutdown
  powerpc/pseries: Pass CPPR value to H_XIRR hcall
  powerpc/booke: Fix a couple typos in the advanced ptrace code
  powerpc: Fix SMP build with disabled CPU hotplugging.
  powerpc: Dynamically allocate pacas
  powerpc/perf: e500 support
  powerpc/perf: Build callchain code regardless of hardware event support.
  powerpc/cpm2: Checkpatch cleanup
  powerpc/86xx: Renaming following split of GE Fanuc joint venture
  powerpc/86xx: Convert gef_pic_lock to raw_spinlock
  powerpc/qe: Convert qe_ic_lock to raw_spinlock
  powerpc/82xx: Convert pci_pic_lock to raw_spinlock
  powerpc/85xx: Convert socrates_fpga_pic_lock to raw_spinlock

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits)
  doc: fix typo in comment explaining rb_tree usage
  Remove fs/ntfs/ChangeLog
  doc: fix console doc typo
  doc: cpuset: Update the cpuset flag file
  Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed
  Remove drivers/parport/ChangeLog
  Remove drivers/char/ChangeLog
  doc: typo - Table 1-2 should refer to "status", not "statm"
  tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments
  No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h
  devres/irq: Fix devm_irq_match comment
  Remove reference to kthread_create_on_cpu
  tree-wide: Assorted spelling fixes
  tree-wide: fix 'lenght' typo in comments and code
  drm/kms: fix spelling in error message
  doc: capitalization and other minor fixes in pnp doc
  devres: typo fix s/dev/devm/
  Remove redundant trailing semicolons from macros
  fix typo "definetly" -> "definitely" in comment
  tree-wide: s/widht/width/g typo in comments
  ...

Fix trivial conflict in Documentation/laptops/00-INDEX