Add mach-netlogic/topology.h which contains XLP cpu number to core and
node mapping.
Signed-off-by: NJayachandran C <jchandra@broadcom.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6271/

Add MSI chip and MSIX chip definitions.

For MSI, we map the link interrupt to a MSI link IRQ which will
do a second level of dispatch based on the MSI status register.

The MSI chip definitions use the MSI enable register to enable
and disable the MSI irqs.

For MSI-X, we split the 32 available MSI-X vectors across the
four PCIe links (8 each). These PIC interrupts generate an IRQ
per link which uses a second level dispatch as well.

The MSI-X chip definition uses the standard functions to enable
and disable interrupts.
Signed-off-by: NJayachandran C <jchandra@broadcom.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6270/

Boot log says:

pci 0000:00:0a.3: no compatible bridge window for [io  0x1000-0x103f]
pci 0000:00:0a.3: no compatible bridge window for [io  0x1100-0x110f]

The io resource starting point on Malta was modified by c5de50da (MIPS:
Malta: Change start address to avoid conflicts.) to avoid conflicts with
ACPI and SMB devices. In fact, that was not needed (and now causing
southbridge ACPI missing) since 166c6370 (PCI: add pci_create_root_bus()
that accepts resource list) and 7c090e5b (mips/PCI: convert to
pci_scan_root_bus() for correct root bus resources) had already done the
correct fix.

This patch actually reverts the change made by c5de50da. And with this
fix, log says:

pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB

These things may not be used but as part of platform resources are better
off to be included.

Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6037/

Currently the supported ISA is only printed on the latest architectures.
Print it also on legacy platforms.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6295/

The platform data already available in tree for JZ4740 USB Device
Controller was previously used by an out-of-tree USB gadget driver
which was not relying on the musb driver and was written by Ingenic
and the Qi-Hardware community.

Update platform data for JZ4740 USB device controller to be used with
musb driver.
Signed-off-by: NApelete Seketeli <apelete@seketeli.net>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6265/

This patch removes CONFIG_MTD_PARTITIONS in config files for MIPS.
 Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b2.
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6162/Signed-off-by: NEunbong Song <eunb.song@samsung.com>

There is already an init_dsp function which checks cpu_has_dsp & calls
__init_dsp if it does. Make use of it instead of duplicating the same
code.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Reviewed-by: NQais Yousef <qais.yousef@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6148/

This patch cleans up the declaration of the resume function by replacing
void pointers with their correct types. The irrelevant & incorrect
comment preceeding the resume function is replaced by one documenting
its function.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Reviewed-by: NQais Yousef <qais.yousef@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6146/

Add defconfig for the Ben NanoNote handheld computer which is built
around QI_LB60 board and Ingenic JZ4740 MIPS SoC.
Signed-off-by: NApelete Seketeli <apelete@seketeli.net>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6257/

Input GPIO changes can generate interrupts, but we need kind of ACK for
them by changing IRQ polarity. This is required to stop hardware from
keep generating interrupts and generate another one on the next GPIO
state change.
This code allows using GPIOs with standard interrupts and add for
example GPIO buttons support.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6216/

The file uses u16 type but doesn't include its definition explicitly

I was getting this error when including this header in my driver:

  arch/mips/include/asm/mipsregs.h:644:33: error: unknown type name ‘u16’
Signed-off-by: NQais Yousef <qais.yousef@imgtec.com>
Reviewed-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6212/

we want the device tree to be unflattened into non init memory so it can be
accessed later by, for example, a probing function of a driver module.
Signed-off-by: NQais Yousef <qais.yousef@imgtec.com>
Reviewed-by: NPaul Burton <paul.burton@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6210/

Signed-off-by: NQais Yousef <qais.yousef@imgtec.com>
Reviewed-by: NPaul Burton <paul.burton@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6209/

The defaults are not always applicable and it makes it hard for the bootloader
to override them. By removing it we give the bootloader full control over what
command line parameters to pass.

Without this change we will need to modify the built-in dtb to add bootloader
cmd line parameters or do some work to append them after we unflatten the device
tree.

Sead3 is a development board, that's why we want to be able to change boot
parameters on the fly from the bootloader.
Signed-off-by: NQais Yousef <qais.yousef@imgtec.com>
Reviewed-by: NPaul Burton <paul.burton@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6208/

if the user sets memsize parameter in commandline or bootloader
environment, we use it to modify the built-in dtb memory size
Signed-off-by: NQais Yousef <qais.yousef@imgtec.com>
Reviewed-by: NPaul Burton <paul.burton@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6207/

Update the early_printk code to include linux/serial_bcm63xx.h which
provides the definitions for the UART block registers. While at it,
remove the inclusion of serial_bcm63xx.h which was just there to allow
smooth transition.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6203/

Now that the UART block defines have been moved to a separate file,
include that one and do not longer rely on the MIPS-specific
bcm63xx_regs.h header file.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6204/

Move the BCM63XX UART driver definitions to
include/linux/serial_bcm63xx.h such that we do not rely on the MIPS
BCM63XX code to provide these for us.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6202/

bcm_{readl,writel} macros expand to __raw_{readl,writel}, use these
directly such that we do not rely on the platform to provide these for
us. As a result, we no longer use bcm63xx_io.h, so remove that inclusion
too.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6201/

bcm63xx_irqs.h is included but we are not using anything from it, drop
that include.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6205/

Remove usage of -mno-jals compiler flag when building a pure
microMIPS kernel. The -mno-jals flag only ever existed within
Mentor toolchains. Dropping this flag allows all FSF toolchains
to work.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Reviewed-by: NMarkos Chandras <markos.chandras@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6200/

This will be needed by the next patch to use said nodes for probing
via the device tree.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6185/

This patch switches Malta from using the MIPS implementation of early
printk with Malta's prom_putchar to using the generic 8250_early
implementation. This offers a couple of advantages:

  - We duplicate less generic code.

  - The UART can be initialised rather than being reliant upon
    inheriting a valid setup from the bootloader.

The Malta console_config function is extended to initialise the early
console if no earlycon= kernel parameter is provided, inheriting the
modetty0 bootloader environment if present and falling back to a
default 38400n8r setup if not. This matches the behaviour used for the
regular console= parameter.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Reviewed-by: NMarkos Chandras <markos.chandras@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6183/

This patch causes the kernel to mux the SERIRQ interrupt to the SERIRQ
pin of the PIIX4 and to enable that interrupt. The kernel depends upon
the interrupt when using the SuperIO UARTs (ttyS0 & ttyS1) but
previously would not configure it, instead relying upon the bootloader
having done so. If that is not the case then the typical result is that
the system appears to hang once it reaches userland as no output is
displayed on the UART.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Reviewed-by: NMarkos Chandras <markos.chandras@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6182/

The RTC is used on Malta to estimate the clock frequency of the CPU &
optionally the GIC. However the kernel previously did not initialise the
RTC, instead relying upon the bootloader having done so. In order to
minimise dependencies which the kernel has upon the bootloader this
patch causes the kernel to initialise the RTC itself prior to making use
of it.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Reviewed-by: NMarkos Chandras <markos.chandras@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6184/

This variable seems to have been copied from Malta when SEAD3 support
was introduced, but is likewise unused. Remove it.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Reviewed-by: NMarkos Chandras <markos.chandras@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6172/

This variable was introduced by commit 96348c8f (of Ralf's historic
Linux/MIPS repository) "Remaining fixes for MIPS's eval boards." but
I don't see any use of it either then or now. Remove it.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Reviewed-by: NMarkos Chandras <markos.chandras@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6171/

Export symbols needed by the octeon-ethernet driver. The patch fixes a
build failure with CONFIG_OCTEON_ETHERNET=m.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6166/

The following build error is seen if CONFIG_32BIT is undefined,
CONFIG_64BIT is defined, and CONFIG_MIPS32_O32 is undefined.

asm/syscall.h: In function 'mips_get_syscall_arg':
arch/mips/include/asm/syscall.h:32:16: error: unused variable 'usp' [-Werror=unused-variable]
cc1: all warnings being treated as errors

Fixes: c0ff3c53 ('MIPS: Enable HAVE_ARCH_TRACEHOOK')
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6160/

The boot hangs early on EBH5600 board when octeon_fdt_pip_iface() is
trying enumerate a non-existant interface. The actual hang happens in
cvmx_helper_interface_get_mode():

	mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));

when interface == 4. We can avoid this situation by first checking that
the interface exists in the DTB.
Signed-off-by: NAaro Koskinen <aaro.koskinen@nsn.com>
Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6101/

When booting with in-kernel DTBs, the pruning code will enumerate
interfaces 0-4. However, there is memory reserved only for 4 so some
other data will get overwritten by cvmx_helper_interface_enumerate().
Signed-off-by: NAaro Koskinen <aaro.koskinen@nsn.com>
Acked-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6102/

Signed-off-by: NAntony Pavlov <antonynpavlov@gmail.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5927/

Only one MIPS development board actually supports enabling/disabling DMA
coherency at runtime, so it's not a good idea to push the overhead of
checking that configuration setting onto every other supported target as
well.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5912/

Clean-up code according to the 'checkpatch.pl' script.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Reviewed-by: NQais Yousef <Qais.Yousef@imgtec.com>
Patchwork: http://patchwork.linux-mips.org/patch/6097/Reviewed-by: NJohn Crispin <blogic@openwrt.org>

Malta with multi-core CM platforms can now use APRP functionality.
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Reviewed-by: NQais Yousef <Qais.Yousef@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6096/

This patch adds RTLX API support for platforms having a CMP.
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Reviewed-by: NQais Yousef <Qais.Yousef@imgtec.com>
Patchwork: http://patchwork.linux-mips.org/patch/6095/Reviewed-by: NJohn Crispin <blogic@openwrt.org>

Split the RTLX functionality in preparation for adding support for CMP
platforms. Common functions remain in the original file and a new file
contains code specific to platforms that do not have a CMP.
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Reviewed-by: NQais Yousef <Qais.Yousef@imgtec.com>
Patchwork: http://patchwork.linux-mips.org/patch/6093/Reviewed-by: NJohn Crispin <blogic@openwrt.org>

This patch adds VPE loader support for platforms having a CMP.
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Reviewed-by: NQais Yousef <Qais.Yousef@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6092/

Split the VPE functionality in preparation for adding support
for CMP platforms. Common functions remain in the original file
and a new file contains code specific to platforms that do not
have a CMP present.
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Reviewed-by: NQais Yousef <Qais.Yousef@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6094/

This patch accomplishes the following:

  * Clean up wording on all MIPS MT configuration menu items.
  * Simplify and neaten up options selected by MIPS_MT_SMP.
  * Make MIPS_MT_SMTC support as deprecated.
  * Make MIPS_CMP support to depend on MIPS_MT_SMP also.
  * Remove redundant options selected by MIPS_CMP.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6019/