Rahul Lakkireddy says:

====================
cxgb4: add support to offload tc flower

This series of patches add support to offload tc flower onto Chelsio
NICs.

Patch 1 adds basic skeleton to prepare for offloading tc flower flows.

Patch 2 adds support to add/remove flows for offload.  Flows can have
accompanying masks.  Following match and action are currently supported
for offload:
Match:  ether-protocol, IPv4/IPv6 addresses, L4 ports (TCP/UDP)
Action: drop, redirect to another port on the device.

Patch 3 adds support to offload tc-flower flows having
vlan actions: pop, push, and modify.

Patch 4 adds support to fetch stats for the offloaded tc flower flows
from hardware.

Support for offloading more match and action types are to be followed
in subsequent series.

v2:
- Setting ftid to -1 not required after bitmap_find_free_region
  in cxgb4_get_free_ftid.
- Direct return can be used as jumping to error path is not needed
  if flower entry allocation failed in cxgb4_tc_flower_replace.
  Same applies if flower entry not found in cxgb4_tc_flower_destroy.
- Also, removed an extra return from cxgb4_tc_flower_destroy.
- Avoid wrapping line for netdev_err message. Also, use
  consistent error message string.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support to retrieve stats from hardware for offloaded tc flower
flows.  Also, poll for the stats of offloaded flows via timer callback.
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for offloading tc-flower flows having
vlan actions: pop, push and modify.
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support to add/remove flows for offload.  Following match
and action are supported for offloading a flow:

Match: ether-protocol, IPv4/IPv6 addresses, L4 ports (TCP/UDP)
Action: drop, redirect to another port on the device.

The qualifying flows can have accompanying mask information.
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add basic skeleton to prepare for offloading tc-flower flows.
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Private part of allocation is never big enough to warrant size_t.

Space savings:

	add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-10 (-10)
	function                                     old     new   delta
	alloc_netdev_mqs                            1120    1110     -10
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no one which would invokes the function skb_header_release.
So just remove it now.
Signed-off-by: NGao Feng <gfree.wind@vip.163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should set xdp_xmit only when xdp_do_redirect() succeed.

Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

kbuild test robot reported a section mismatch warning w. gcc 4.x:
WARNING: lib/test_rhashtable.o(.text+0x139e):
Section mismatch in reference from the function rhltable_insert.clone.3() to the variable .init.data:rhlt

so remove this annotation.

Fixes: cdd4de37 ("test_rhashtable: add test case for rhl_table interface")
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_dst_set(skb, dst) installs a normal (refcounted) dst, there is no
point using skb_dst_force(skb)
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

> net/ipv4/fib_frontend.c: In function 'fib_validate_source':
> net/ipv4/fib_frontend.c:411:16: error: 'struct netns_ipv4' has no member named 'fib_has_custom_local_routes'
>    if (net->ipv4.fib_has_custom_local_routes)
>                 ^
> net/ipv4/fib_frontend.c: In function 'inet_rtm_newroute':
> net/ipv4/fib_frontend.c:773:12: error: 'struct netns_ipv4' has no member named 'fib_has_custom_local_routes'
>    net->ipv4.fib_has_custom_local_routes = true;
>             ^

Fixes: 6e617de8 ("net: avoid a full fib lookup when rp_filter is disabled.")
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, there is a difference in netlink events received when an
interface is modified through bridge ioctl() or through netlink. This
patch generates additional events when an interface is added to or
removed from a bridge via ioctl().

When adding then removing an interface from a bridge with netlink, we
get:

5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff

5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
Deleted 5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff

When using ioctl():

5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff

5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master bridge0 state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
Deleted 5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 master bridge0 state UNKNOWN
    link/ether 9e:da:60:ee:cf:c8
5: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default
    link/ether 9e:da:60:ee:cf:c8 brd ff:ff:ff:ff:ff:ff

Without this patch, the last netlink notification is not sent.
Signed-off-by: NVincent Bernat <vincent@bernat.im>
Reviewed-by: NStephen Hemminger <stephen@networkplumber.org>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

do not wait for completion while deleting the filters
when the adapter is shutting down because we may not get
the response as interrupts will be disabled.
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the smc_connection as first parameter with smc_cdc_get_free_slot().
This is just a small code cleanup, no functional change.
Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use *_pool_zalloc rather than *_pool_alloc followed by memset with 0.
Found by coccinelle spatch "api/alloc/pool_zalloc-simple.cocci"
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dumping a DSA port's FDB entries is not specific to a DSA slave, so add
a dsa_port_fdb_dump function, similarly to dsa_port_fdb_add and
dsa_port_fdb_del.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A few DSA slave functions take a dsa_slave_priv pointer as first
argument, whereas the scope of the slave.c functions is the slave
net_device structure. Fix this and rename dsa_netpoll_send_skb to
dsa_slave_netpoll_send_skb.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Each port in DSA has its own dedicated CPU port currently available in
its parent switch's ds->ports[port].cpu_dp. Use it instead of getting
the unique tree CPU port, which will be deprecated soon.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 1dced6a8 ("ipv4: Restore accept_local behaviour
in fib_validate_source()") a full fib lookup is needed even if
the rp_filter is disabled, if accept_local is false - which is
the default.

What we really need in the above scenario is just checking
that the source IP address is not local, and in most case we
can do that is a cheaper way looking up the ifaddr hash table.

This commit adds a helper for such lookup, and uses it to
validate the src address when rp_filter is disabled and no
'local' routes are created by the user space in the relevant
namespace.

A new ipv4 netns flag is added to account for such routes.
We need that to preserve the same behavior we had before this
patch.

It also drops the checks to bail early from __fib_validate_source,
added by the commit 1dced6a8 ("ipv4: Restore accept_local
behaviour in fib_validate_source()") they do not give any
measurable performance improvement: if we do the lookup with are
on a slower path.

This improves UDP performances for unconnected sockets
when rp_filter is disabled by 5% and also gives small but
measurable performance improvement for TCP flood scenarios.

v1 -> v2:
 - use the ifaddr lookup helper in __ip_dev_find(), as suggested
   by Eric
 - fall-back to full lookup if custom local routes are present
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Joel Fernandes says:

====================
Add cross-compilation support to eBPF samples

These patches fix issues seen when cross-compiling eBPF samples on arm64.
Compared to [1], I dropped the controversial inline-asm patch and exploring
other options to fix it. However these patches are a step in the right
direction and I look forward to getting them into -next and the merge window.

Changes since v3:
- just a repost with acks

[1] https://lkml.org/lkml/2017/8/7/417
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NJoel Fernandes <joelaf@google.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

BPF samples fail to build when cross-compiling for ARM64 because of incorrect
pt_regs param selection. This is because clang defines __x86_64__ and
bpf_headers thinks we're building for x86. Since clang is building for the BPF
target, it shouldn't make assumptions about what target the BPF program is
going to run on. To fix this, lets pass ARCH so the header knows which target
the BPF program is being compiled for and can use the correct pt_regs code.
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NJoel Fernandes <joelaf@google.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When cross compiling, bpf samples use HOSTCC for compiling the non-BPF part of
the sample, however what we really want is to use the cross compiler to build
for the cross target since that is what will load and run the BPF sample.
Detect this and compile samples correctly.
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NJoel Fernandes <joelaf@google.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When cross-compiling the bpf sample map_perf_test for aarch64, I find that
__NR_getpgrp is undefined. This causes build errors. This syscall is deprecated
and requires defining __ARCH_WANT_SYSCALL_DEPRECATED. To avoid having to define
that, just use a different syscall (getppid) for the array map stress test.
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NJoel Fernandes <joelaf@google.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allen Pais says:

====================
net: use setup_timer() helper function.

 This series uses setup_timer() helper function. The series
addresses the files under drivers/net/*.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>