Just reformatting the comments and typos fixed, no functional
changes.  Particularly,
- avoid the kerneldoc marker "/**",
- reduce multiple comment lines into single lines,
- corrected wrongly referred function names
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Both playback and capture callbacks are identical, so let's merge
them.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The current code deals with the stream start / stop solely via
line6_pcm_acquire() and line6_pcm_release().  This was (supposedly)
intended to avoid the races, but it doesn't work as expected.  The
concurrent acquire and release calls can be performed without proper
protections, thus this might result in memory corruption.
Furthermore, we can't take a mutex to protect the whole function
because it can be called from the PCM trigger callback that is an
atomic context.  Also spinlock isn't appropriate because the function
allocates with kmalloc with GFP_KERNEL.  That is, these function just
lead to singular problems.

This is an attempt to reduce the existing races.  First off, separate
both the stream buffer management and the stream URB management.  The
former is protected via a newly introduced state_mutex while the
latter is protected via each line6_pcm_stream lock.

Secondly, the stream state are now managed in opened and running bit
flags of each line6_pcm_stream.  Not only this a bit clearer than
previous combined bit flags, this also gives a better abstraction.
These rewrites allows us to make common hw_params and hw_free
callbacks for both playback and capture directions.

For the monitor and impulse operations, still line6_pcm_acquire() and
line6_pcm_release() are used.  They call internally the corresponding
functions for both playback and capture streams with proper lock or
mutex.  Unlike the previous versions, these function don't take the
bit masks but the only single type value.  Also they are supposed to
be applied only as duplex operations.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Clearing prev_fsize in line6_pcm_acquire() is pretty racy.
This can be called at any time while the stream is being played.
Rather better to clear prev_fbuf and prev_fsize at the proper place
like the stream stop for capture, and just after copying the monitor /
impulse data inside the spinlock.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The impulse and monitor handling in submit_audio_out_urb() isn't
protected thus this can be racy with the capture stream handling.
This patch extends the range to protect via each stream's spinlock
(now the whole submit_audio_*_urb() are covered), and take the capture
stream lock additionally for the impulse and monitor handling part.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move the check of multi configurations before snd_card_new() as a
short path, and reduce superfluous pointer references.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of allocating the private data individually in each driver's
probe at first, let snd_card_new() allocate the data that is called in
line6_probe().  This simplifies the primary probe functions.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The interface argument is used just for retrieving the assigned
device, which can be already found in line6->ifcdev.  Drop them from
the callbacks.  Also, pass the usb id to private_init so that the
driver can deal with it there.  This is a preliminary work for the
further cleanup to move the whole allocation into driver.c.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A minor optimization; while pausing, the driver just copies the zero
that doesn't need any volume changes.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The PCM stream buffer allocation and free are identical for both
playback and capture streams.  Provide single helper functions.
These are used only in pcm.c, thus they can be even static.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is the last remaining snd_printk() usage in this driver.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The codes to unlink and sync URBs are identical for both playback and
capture streams.  Consolidate to single helper functions.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Introduce a new line6_pcm_stream structure and group individual
fields of snd_line6_pcm struct to playback and capture groups.

This patch itself just does rename and nothing else.  More
meaningful cleanups based on these fields shuffling will follow.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If the problem still really remains, we should fix it instead of
papering over it like this...
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Using a decremental loop without particular reasons worsens the
readability a lot.  Use incremental loops instead.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The trigger callback is already spinlocked, so we need no more lock
here (even for the linked substreams).  Let's drop it.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

line6_pcm_acquire() tries to restore the newly obtained resources at
the error path.  But some flags aren't recorded and released properly
when the corresponding buffer is already present.  These bits have to
be cleared in the error recovery, too.

Also, "flags_final" can be initialized to zero since we pass only the
subset of "channels" bits.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed a few places using bits OR wrongly for condition checks.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The midi_transmit_lock is used always inside the send_urb_lock, thus
it doesn't play any role.  Let's kill it.  Also, rename
"send_urb_lock" as a more simple name "lock" since this is the only
lock for midi.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The function isn't used any longer after rewriting from sysfs to leds
class in toneport.c.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix memory leak at probe error path by rearranging the call order in
line6_destruct() so that the common destructor is always called.
Also this simplifies the error path to a single goto label.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Split some codes in the lengthy line6_probe().
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of non-standard sysfs, reimplement the LED controls on
TonePort as LED class devices.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently disconnect callback is used as a driver's destructor, and
this has to be called not only at the disconnection time but also at
the error paths during probe.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... so that timer_del_sync() in the destructor can be called safely at
any time.  Also move the mod_timer() call in toneport_setup(), which
is a bit clearer place.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The interface and driver objects are always set when callbacks are
called.  Drop such superfluous NULL checks in init and disconnect
calls of each driver.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's utterly unsafe to proceed further the disconnect procedure if the
assigned usbdev is inconsistent with the expected object.  Better to
put a WARN_ON() for more cautions and abort immediately.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... in line6_disconnect() as well.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver version string was removed in an ealier commit for being
useless.  These are equally useless.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The correct spelling includes the space.  Fix this in strings and
comments that refer to the manufacturer.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Both functions are used nowhere.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's used only locally.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Call line6_pcm_disconnect() at disconnect to make sure that all URBs
are cleared.  Also reduce the superfluous snd_pcm_stop() calls from
the function (and remove the unused function) since the streams are
guaranteed to be stopped at this point via snd_card_disconnect().
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Calling line6_pcm_disconnect() at suspend callback is superfluous and
rather confusing.  Let's get rid of it.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>