- 16 12月, 2009 1 次提交
-
-
由 Luck, Tony 提交于
Needed for commit 2c992208 ("intel-iommu: Detect DMAR in hyperspace at probe time.) to build on IA64. Signed-off-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
- 08 12月, 2009 7 次提交
-
-
由 KOSAKI Motohiro 提交于
commit eb3fa7cb said Intel IOMMU Intel IOMMU driver needs memory during DMA map calls to setup its internal page tables and for other data structures. As we all know that these DMA map calls are mostly called in the interrupt context or with the spinlock held by the upper level drivers(network/storage drivers), so in order to avoid any memory allocation failure due to low memory issues, this patch makes memory allocation by temporarily setting PF_MEMALLOC flags for the current task before making memory allocation calls. We evaluated mempools as a backup when kmem_cache_alloc() fails and found that mempools are really not useful here because 1) We don't know for sure how much to reserve in advance 2) And mempools are not useful for GFP_ATOMIC case (as we call memory alloc functions with GFP_ATOMIC) (akpm: point 2 is wrong...) The above description doesn't justify to waste system emergency memory at all. Non MM subsystem must not use PF_MEMALLOC. Memory reclaim need few memory, anyone must not prevent it. Otherwise the system cause mysterious hang-up and/or OOM Killer invokation. Plus, akpm already pointed out what we should do. Then, this patch revert it. Cc: Keshavamurthy Anil S <anil.s.keshavamurthy@intel.com> Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Chris Wright 提交于
We are seeing a bug when booting w/ iommu=pt with current upstream (bisect blames 19943b0e "intel-iommu: Unify hardware and software passthrough support). The issue is specific to this loop during identity map initialization of each device: domain_context_mapping_one(si_domain, ..., CONTEXT_TT_PASS_THROUGH) ... /* Skip top levels of page tables for * iommu which has less agaw than default. */ for (agaw = domain->agaw; agaw != iommu->agaw; agaw--) { pgd = phys_to_virt(dma_pte_addr(pgd)); if (!dma_pte_present(pgd)) { <------ failing here spin_unlock_irqrestore(&iommu->lock, flags); return -ENOMEM; } This box has 2 iommu's in it. The catchall iommu has MGAW == 48, and SAGAW == 4. The other iommu has MGAW == 39, SAGAW == 2. The device that's failing the above pgd test is the only device connected to the non-catchall iommu, which has a smaller address width than the domain default. This test is not necessary since the context is in PT mode and the ASR is ignored. Thanks to Don Dutile for discovering and debugging this one. Cc: stable@kernel.org Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 David Woodhouse 提交于
The hotplug notifier will call find_domain() to see if the device in question has been assigned an IOMMU domain. However, this should never be called for devices with a "dummy" domain, such as graphics devices when intel_iommu=igfx_off is set and the corresponding IOMMU isn't even initialised. If you do that, it'll oops as it dereferences the (-1) pointer. The notifier function should check iommu_no_mapping() for the device before doing anything else. Cc: stable@kernel.org Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 David Woodhouse 提交于
Some HP BIOSes report an RMRR region (a region which needs a 1:1 mapping in the IOMMU for a given device) which has an end address lower than its start address. Detect that and warn, rather than triggering the BUG() in dma_pte_clear_range(). Cc: stable@kernel.org Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 David Woodhouse 提交于
The BIOS errors where an IOMMU is reported either at zero or a bogus address are causing problems even when the IOMMU is disabled -- because interrupt remapping uses the same hardware. Ensure that the checks get applied for the interrupt remapping initialisation too. Cc: stable@kernel.org Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Chris Wright 提交于
Many BIOSes will lie to us about the existence of an IOMMU, and claim that there is one at an address which actually returns all 0xFF. We need to detect this early, so that we know we don't have a viable IOMMU and can set up swiotlb before it's too late. Cc: stable@kernel.org Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6由 David Woodhouse 提交于
Merge the BIOS workarounds from 2.6.32, and the swiotlb fallback on failure.
-
- 06 12月, 2009 9 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits) x86, Calgary IOMMU quirk: Find nearest matching Calgary while walking up the PCI tree x86/amd-iommu: Remove amd_iommu_pd_table x86/amd-iommu: Move reset_iommu_command_buffer out of locked code x86/amd-iommu: Cleanup DTE flushing code x86/amd-iommu: Introduce iommu_flush_device() function x86/amd-iommu: Cleanup attach/detach_device code x86/amd-iommu: Keep devices per domain in a list x86/amd-iommu: Add device bind reference counting x86/amd-iommu: Use dev->arch->iommu to store iommu related information x86/amd-iommu: Remove support for domain sharing x86/amd-iommu: Rearrange dma_ops related functions x86/amd-iommu: Move some pte allocation functions in the right section x86/amd-iommu: Remove iommu parameter from dma_ops_domain_alloc x86/amd-iommu: Use get_device_id and check_device where appropriate x86/amd-iommu: Move find_protection_domain to helper functions x86/amd-iommu: Simplify get_device_resources() x86/amd-iommu: Let domain_for_device handle aliases x86/amd-iommu: Remove iommu specific handling from dma_ops path x86/amd-iommu: Remove iommu parameter from __(un)map_single x86/amd-iommu: Make alloc_new_range aware of multiple IOMMUs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (31 commits) GFS2: Fix glock refcount issues writeback: remove unused nonblocking and congestion checks (gfs2) GFS2: drop rindex glock to refresh rindex list GFS2: Tag all metadata with jid GFS2: Locking order fix in gfs2_check_blk_state GFS2: Remove dirent_first() function GFS2: Display nobarrier option in /proc/mounts GFS2: add barrier/nobarrier mount options GFS2: remove division from new statfs code GFS2: Improve statfs and quota usability GFS2: Use dquot_send_warning() VFS: Export dquot_send_warning GFS2: Add set_xquota support GFS2: Add get_xquota support GFS2: Clean up gfs2_adjust_quota() and do_glock() GFS2: Remove constant argument from qd_get() GFS2: Remove constant argument from qdsb_get() GFS2: Add proper error reporting to quota sync via sysfs GFS2: Add get_xstate quota function GFS2: Remove obsolete code in quota.c ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6由 Linus Torvalds 提交于
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (30 commits) TOMOYO: Add recursive directory matching operator support. remove CONFIG_SECURITY_FILE_CAPABILITIES compile option SELinux: print denials for buggy kernel with unknown perms Silence the existing API for capability version compatibility check. LSM: Move security_path_chmod()/security_path_chown() to after mutex_lock(). SELinux: header generation may hit infinite loop selinux: Fix warnings security: report the module name to security_module_request Config option to set a default LSM sysctl: require CAP_SYS_RAWIO to set mmap_min_addr tpm: autoload tpm_tis based on system PnP IDs tpm_tis: TPM_STS_DATA_EXPECT workaround define convenient securebits masks for prctl users (v2) tpm: fix header for modular build tomoyo: improve hash bucket dispersion tpm add default function definitions LSM: imbed ima calls in the security hooks SELinux: add .gitignore files for dynamic classes security: remove root_plug SELinux: fix locking issue introduced with c6d3aaa4 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (50 commits) pcmcia: rework the irq_req_t typedef pcmcia: remove deprecated handle_to_dev() macro pcmcia: pcmcia_request_window() doesn't need a pointer to a pointer pcmcia: remove unused "window_t" typedef pcmcia: move some window-related code to pcmcia_ioctl.c pcmcia: Change window_handle_t logic to unsigned long pcmcia: Pass struct pcmcia_socket to pcmcia_get_mem_page() pcmcia: Pass struct pcmcia_device to pcmcia_map_mem_page() pcmcia: Pass struct pcmcia_device to pcmcia_release_window() drivers/pcmcia: remove unnecessary kzalloc pcmcia: correct handling for Zoomed Video registers in topic.h pcmcia: fix printk formats pcmcia: autoload module pcmcia pcmcia/staging: update comedi drivers PCMCIA: stop duplicating pci_irq in soc_pcmcia_socket PCMCIA: ss: allow PCI IRQs > 255 PCMCIA: soc_common: remove 'dev' member from soc_pcmcia_socket PCMCIA: soc_common: constify soc_pcmcia_socket ops member PCMCIA: sa1111: remove duplicated initializers PCMCIA: sa1111: wrap soc_pcmcia_socket to contain sa1111 specific data ...
-
由 David Daney 提交于
Use the new unreachable() macro instead of for(;;); Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Acked-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Daney 提交于
Use the new unreachable() macro instead of for(;;); Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> CC: Heiko Carstens <heiko.carstens@de.ibm.com> CC: linux390@de.ibm.com CC: linux-s390@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Daney 提交于
Use the new unreachable() macro instead of while(1); Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> CC: linux-mips@linux-mips.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Daney 提交于
Use the new unreachable() macro instead of for(;;);. When allyesconfig is built with a GCC-4.5 snapshot on i686 the size of the text segment is reduced by 3987 bytes (from 6827019 to 6823032). Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Acked-by: N"H. Peter Anvin" <hpa@zytor.com> CC: Thomas Gleixner <tglx@linutronix.de> CC: Ingo Molnar <mingo@redhat.com> CC: x86@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Daney 提交于
Starting with version 4.5, GCC has a new built-in function __builtin_unreachable() that can be used in places like the kernel's BUG() where inline assembly is used to transfer control flow. This eliminated the need for an endless loop in these places. The patch adds a new macro 'unreachable()' that will expand to either __builtin_unreachable() or an endless loop depending on the compiler version. Change from v1: Simplify unreachable() for non-GCC 4.5 case. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 12月, 2009 23 次提交
-
-
由 Steven Whitehouse 提交于
This patch fixes some ref counting issues. Firstly by moving the point at which we drop the ref count after a dlm lock operation has completed we ensure that we never call gfs2_glock_hold() on a lock with a zero ref count. Secondly, by using atomic_dec_and_lock() in gfs2_glock_put() we ensure that at no time will a glock with zero ref count appear on the lru_list. That means that we can remove the check for this in our shrinker (which was racy). Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Wu Fengguang 提交于
No one is calling wb_writeback and write_cache_pages with wbc.nonblocking=1 any more. And lumpy pageout will want to do nonblocking writeback without the congestion wait. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Benjamin Marzinski 提交于
When a gfs2 filesystem is grown, it needs to rebuild the rindex list to be able to use the new space. gfs2 does this when the rindex is marked not uptodate, which happens when the rindex glock is dropped. However, on a single node setup, there is never any reason to drop the rindex glock, so gfs2 never invalidates the the rindex. This patch makes gfs2 automatically drop the rindex glock after filesystem grows, so it can refresh the rindex list. Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
There are two spare field in the header common to all GFS2 metadata. One is just the right size to fit a journal id in it, and this patch updates the journal code so that each time a metadata block is modified, we tag it with the journal id of the node which is performing the modification. The reason for this is that it should make it much easier to debug issues which arise if we can tell which node was the last to modify a particular metadata block. Since the field is updated before the block is written into the journal, each journal should only contain metadata which is tagged with its own journal id. The one exception to this is the journal header block, which might have a different node's id in it, if that journal was recovered by another node in the cluster. Thus each journal will contain a record of which nodes recovered it, via the journal header. The other field in the metadata header could potentially be used to hold information about what kind of operation was performed, but for the time being we just zero it on each transaction so that if we use it for that in future, we'll know that the information (where it exists) is reliable. I did consider using the other field to hold the journal sequence number, however since in GFS2's journaling we write the modified data into the journal and not the original data, this gives no information as to what action caused the modification, so I think we can probably come up with a better use for those 64 bits in the future. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
In some cases we already have the rindex lock when we enter this function. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This function only had one caller left, and that caller only called it for leaf blocks, hence one branch of the "if" was never taken. In addition the call to get_left had already verified the metadata type, so the function can be reduced to a single line of code in its caller. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Since the default is barriers on, this only displays the nobarrier option when that is active. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Christoph Hellwig 提交于
Currently gfs2 issues barrier unconditionally. There are various reasons to disable them, be that just for testing or for stupid devices flushing large battert backed caches. Add a nobarrier option that matches xfs and btrfs for this. Also add a symmetric barrier option to turn it back on at remount time. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Benjamin Marzinski 提交于
It's not necessary to do any 64bit division for the statfs sync code, so remove it. Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Benjamin Marzinski 提交于
GFS2 now has three new mount options, statfs_quantum, quota_quantum and statfs_percent. statfs_quantum and quota_quantum simply allow you to set the tunables of the same name. Setting setting statfs_quantum to 0 will also turn on the statfs_slow tunable. statfs_percent accepts an integer between 0 and 100. Numbers between 1 and 100 will cause GFS2 to do any early sync when the local number of blocks free changes by at least statfs_percent from the totoal number of blocks free. Setting statfs_percent to 0 disables this. Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This adds support to GFS2 to send quota warnings via netlink. Also it removes a stray \r which was left over from when the code used to print warnings on the console. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Sending a message to userspace in a generic format to warn of events (e.g. quota exceeded) in the quota subsystem is a generically useful feature. This patch makes some minor changes to the send_message function from dquot.c renaming it quota_send_message, moving it to quota.c and exporting it for use by filesystems which do not use the dquot code. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This patch adds the ability to set GFS2 quota limit and warning levels via the XFS quota API. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This adds support for viewing the current GFS2 quota settings via the XFS quota API. The setting of quotas will be addressed in a later patch. Fields which are not supported here are left set to zero. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Reviewed-by: NBob Peterson <rpeterso@redhat.com>
-
由 Steven Whitehouse 提交于
Both of these functions contained confusing and in one case duplicate code. This patch adds a new check in do_glock() so that we report -ENOENT if we are asked to sync a quota entry which doesn't exist. Due to the previous patch this is now reported correctly to userspace. Also there are a few new comments, and I hope that the code is easier to understand now. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This function was only ever called with the "create" argument set to true, so we can remove it. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The "create" argument to qdsb_get() was only ever set to true, so this patch removes that argument. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
For some reason, the errors were not making it to userspace. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This allows querying of the quota state via the XFS quota API. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
There is no point in testing for GLF_DEMOTE here, we might as well always release the glock at that point. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The plan is to add further operations to the gfs2_quotactl_ops in future patches. The sync operation is easy, so we start with that one. We plan to use the XFS quota control functions because they more closely match the GFS2 ones. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
These two functions are altered so that gfs2_quota_sync may in future be called directly from the VFS. The GFS2 superblock changes to a VFS super block and there is an addition of an int argument which is currently ignored. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
GFS2 needs to call this from under a glock, so we need GFP_NOFS and I suspect that other filesystems might require this too. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-