- 26 1月, 2008 40 次提交
-
-
由 Cornelia Huck 提交于
Introduce a private pointer in struct subchannel to store per-subchannel type data (cannot use dev->priv since this is already used for something else). Create a new header io_sch.h for I/O subchannel specific structures and instructions. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Cleanup cio_debug.h. Also make CIO_DEBUG add the "cio:" prefix to the printk string so that it isn't needed for the debug feature. Fix outdated comments for cio_debug_init() and clean it up. Enlarge cio_crw to the same size as cio_msg so we may actually find some relevant information there. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Add wrapper functions for driver_register and driver_unregister so that css drivers don't need to muck with struct device_driver directly. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
sch->driver needs to be reset to NULL on failed probe and after remove. We also need to check for sch->driver on shutdown. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Make all callbacks in css_driver take a struct subchannel (and not a struct device). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
- Introduce to_cssdriver. - Use to_xxx instead of container_of where possible. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Information about a ccw device will be dumped in case of a ccw timeout. This can be enabled with the kernel parameter ccw_timeout_log. Signed-off-by: NSebastian Ott <sebott@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Signed-off-by: NSebastian Ott <sebott@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits) [SCSI] usbstorage: use last_sector_bug flag universally [SCSI] libsas: abstract STP task status into a function [SCSI] ultrastor: clean up inline asm warnings [SCSI] aic7xxx: fix firmware build [SCSI] aacraid: fib context lock for management ioctls [SCSI] ch: remove forward declarations [SCSI] ch: fix device minor number management bug [SCSI] ch: handle class_device_create failure properly [SCSI] NCR5380: fix section mismatch [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices [SCSI] IB/iSER: add logical unit reset support [SCSI] don't use __GFP_DMA for sense buffers if not required [SCSI] use dynamically allocated sense buffer [SCSI] scsi.h: add macro for enclosure bit of inquiry data [SCSI] sd: add fix for devices with last sector access problems [SCSI] fix pcmcia compile problem [SCSI] aacraid: add Voodoo Lite class of cards. [SCSI] aacraid: add new driver features flags [SCSI] qla2xxx: Update version number to 8.02.00-k7. [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] hifn795x: Disallow built-in hifn795x when HW_RANDOM is m
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (31 commits) ocfs2: clean up bh null checks ocfs2: document access rules for blocked_lock_list configfs: file.c fix possible recursive locking configfs: dir.c fix possible recursive locking configfs: Remove EXPERIMENTAL ocfs2: bump version number ocfs2/dlm: Clear joining_node on hearbeat node down ocfs2: convert byte order of constant instead of variable ocfs2: Update default cluster timeouts ocfs2: printf fixes ocfs2: Use generic_file_llseek ocfs2: Safer read_inline_data() ocfs2: Silence false lockdep warnings [PATCH 2/2] ocfs2: cluster aware flock() [PATCH 1/2] ocfs2: add flock lock type ocfs2: Local alloc window size changeable via mount option ocfs2: Support commit= mount option ocfs2: Add missing permission checks [PATCH 2/2] ocfs2: Implement group add for online resize [PATCH 1/2] ocfs2: Add group extend for online resize ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (67 commits) fix drivers/ata/sata_fsl.c double-decl [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof() pata_legacy: Merge winbond support ata_generic: Cenatek support pata_winbond: error return pata_serverworks: Fix cable types and cosmetics pata_mpc52xx: remove un-needed assignment libata: fix off-by-one in error categorization ahci: factor out AHCI enabling and enable AHCI before reading CAP ata_piix: implement SIDPR SCR access ata_piix: convert to prepare - activate initialization libata: factor out ata_pci_activate_sff_host() from ata_pci_one() [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof() pata_legacy: resychronize with upstream changes and resubmit [libata] pata_legacy: typo fix [libata] pata_winbond: update for new ->data_xfer hook pata_pcmcia: convert to new data_xfer prototype libata annotations and fixes libata: use dev_driver_string() instead of "libata" in libata-sff.c ata_piix: kill unused constants and flags ...
-
由 Mark Fasheh 提交于
If we know a buffer_head is non-null, then brelse() is unnecessary and put_bh() can be used instead. Also, an explicit check for NULL is unnecessary when using brelse(). This patch only covers buffer_head_io.c and resize.c, which have recently added code which exhibits this problem. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
ocfs2_super->blocked_lock_list and ocfs2_super->blocked_lock_count have some usage restrictions which aren't immediately obvious to anyone reading the code. It's a good idea to document this so that we avoid making costly mistakes in the future. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joonwoo Park 提交于
configfs_register_subsystem() with default_groups triggers recursive locking. it seems that mutex_lock_nested is needed. ============================================= [ INFO: possible recursive locking detected ] 2.6.24-rc6 #145 --------------------------------------------- swapper/1 is trying to acquire lock: (&sb->s_type->i_mutex_key#3){--..}, at: [<c40c9a9e>] configfs_add_file+0x2e/0x70 but task is already holding lock: (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca985>] configfs_register_subsystem+0x55/0x130 other info that might help us debug this: 1 lock held by swapper/1: #0: (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca985>] configfs_register_subsystem+0x55/0x130 stack backtrace: Pid: 1, comm: swapper Not tainted 2.6.24-rc6 #145 [<c40053ba>] show_trace_log_lvl+0x1a/0x30 [<c4005e82>] show_trace+0x12/0x20 [<c400687e>] dump_stack+0x6e/0x80 [<c404ec72>] __lock_acquire+0xe62/0x1120 [<c404efb2>] lock_acquire+0x82/0xa0 [<c43fda88>] mutex_lock_nested+0x98/0x2e0 [<c40c9a9e>] configfs_add_file+0x2e/0x70 [<c40c9b0c>] configfs_create_file+0x2c/0x40 [<c40ca639>] configfs_attach_item+0x139/0x220 [<c40ca734>] configfs_attach_group+0x14/0x140 [<c40ca7e9>] configfs_attach_group+0xc9/0x140 [<c40ca9f6>] configfs_register_subsystem+0xc6/0x130 [<c45c8186>] init_netconsole+0x2b6/0x300 [<c45a75f2>] kernel_init+0x142/0x320 [<c4004fb3>] kernel_thread_helper+0x7/0x14 ======================= Signed-off-by: NJoonwoo Park <joonwpark81@gmail.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joonwoo Park 提交于
configfs_register_subsystem() with default_groups triggers recursive locking. it seems that mutex_lock_nested is needed. ============================================= [ INFO: possible recursive locking detected ] 2.6.24-rc6 #141 --------------------------------------------- swapper/1 is trying to acquire lock: (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca76f>] configfs_attach_group+0x4f/0x190 but task is already holding lock: (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca9d5>] configfs_register_subsystem+0x55/0x130 other info that might help us debug this: 1 lock held by swapper/1: #0: (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca9d5>] configfs_register_subsystem+0x55/0x130 stack backtrace: Pid: 1, comm: swapper Not tainted 2.6.24-rc6 #141 [<c40053ba>] show_trace_log_lvl+0x1a/0x30 [<c4005e82>] show_trace+0x12/0x20 [<c400687e>] dump_stack+0x6e/0x80 [<c404ec72>] __lock_acquire+0xe62/0x1120 [<c404efb2>] lock_acquire+0x82/0xa0 [<c43fdad8>] mutex_lock_nested+0x98/0x2e0 [<c40ca76f>] configfs_attach_group+0x4f/0x190 [<c40caa46>] configfs_register_subsystem+0xc6/0x130 [<c45c8186>] init_netconsole+0x2b6/0x300 [<c45a75f2>] kernel_init+0x142/0x320 [<c4004fb3>] kernel_thread_helper+0x7/0x14 ======================= Signed-off-by: NJoonwoo Park <joonwpark81@gmail.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
configfs has been alive and kicking for a while now. It underpins some non-EXPERIMENTAL subsystems, such as OCFS2's cluster stack. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
Bump the printed version to 1.5.0. This helps us quickly identify which version of Ocfs2 a bug filer is running. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Tao Ma 提交于
Currently the process of dlm join contains 2 steps: query join and assert join. After query join, the joined node will set its joining_node. So if the joining node happens to panic before the 2nd step, the joined node will fail to clear its joining_node flag because that node isn't in the domain map. It at least cause 2 problems. 1. All the new join request will fail. So no new node can mount the volume. 2. The joined node can't umount the volume since during the umount process it has to wait for the joining_node to be unknown. So the umount will be hanged. The solution is to clear the joining_node before we check the domain map. Signed-off-by: NTao Ma <tao.ma@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Marcin Slusarz 提交于
Convert byte order of constant instead of variable it will be done at compile time vs run time. Remove unused le32_and_cpu. Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Sunil Mushran 提交于
Lots of people are having trouble with the default timeouts, which are too low. These new values are derived from an informal survey taken on ocfs2-users, as well as data from bug reports. This should reduce the amount of cluster disconnects and subsequent fencing seen during normal workloads. Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Jan Kara 提交于
Explicitely convert loff_t to long long in printf. Just for sure... Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Jan Kara 提交于
We should use generic_file_llseek() and not default_llseek() so that s_maxbytes gets properly checked when seeking. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Jan Kara 提交于
In ocfs2_read_inline_data() we should store file size in loff_t. Although the file size should fit in 32 bits we cannot be sure in case filesystem is corrupted. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Jan Kara 提交于
Create separate lockdep lock classes for system file's i_mutexes. They are used to guard allocations and similar things and thus rank differently than i_mutex of a regular file or directory. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
Hook up ocfs2_flock(), using the new flock lock type in dlmglue.c. A new mount option, "localflocks" is added so that users can revert to old functionality as need be. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
This adds a new dlmglue lock type which is intended to back flock() requests. Since these locks are driven from userspace, usage rules are much more liberal than the typical Ocfs2 internal cluster lock. As a result, we can't make use of most dlmglue features - lock caching and lock level optimizations in particular. Additionally, userspace is free to deadlock itself, so we have to deal with that in the same way as the rest of the kernel - by allowing a signal to abort a lock request. In order to keep ocfs2_cluster_lock() complexity down, ocfs2_file_lock() does it's own dlm coordination. We still use the same helper functions though, so duplicated code is kept to a minimum. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Sunil Mushran 提交于
Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
Mostly taken from ext3. This allows the user to set the jbd commit interval, in seconds. The default of 5 seconds stays the same, but now users can easily increase the commit interval. Typically, this would be increased in order to benefit performance at the expense of data-safety. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
Check that an online resize is being driven by a user with permission to change system resource limits. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Tao Ma 提交于
This patch adds the ability for a userspace program to request that a properly formatted cluster group be added to the main allocation bitmap for an Ocfs2 file system. The request is made via an ioctl, OCFS2_IOC_GROUP_ADD. On a high level, this is similar to ext3, but we use a different ioctl as the structure which has to be passed through is different. During an online resize, tunefs.ocfs2 will format any new cluster groups which must be added to complete the resize, and call OCFS2_IOC_GROUP_ADD on each one. Kernel verifies that the core cluster group information is valid and then does the work of linking it into the global allocation bitmap. Signed-off-by: NTao Ma <tao.ma@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Tao Ma 提交于
This patch adds the ability for a userspace program to request an extend of last cluster group on an Ocfs2 file system. The request is made via ioctl, OCFS2_IOC_GROUP_EXTEND. This is derived from EXT3_IOC_GROUP_EXTEND, but is obviously Ocfs2 specific. tunefs.ocfs2 would call this for an online-resize operation if the last cluster group isn't full. Signed-off-by: NTao Ma <tao.ma@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Hans de Goede 提交于
This patch sets the last_sector_bug flag to 1 for all USB disks. This is needed to makes the cardreader on various HP multifunction printers work. Since the performance impact is negible we set this flag for all USB disks to avoid an unusual_devs.h nightmare. Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl> Acked-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Tao Ma 提交于
We need to reserve at least two ioctls for online-resize. Reserve a small range of ioctls for Ocfs2 use in Documentation/ioctl-number.txt. This should give us enough room for future growth. Signed-off-by: NTao Ma <tao.ma@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Tao Ma 提交于
This value is initialized from global_bitmap->id2.i_chain.cl_cpg. If there is only 1 group, it will be equal to the total clusters in the volume. So as for online resize, it should change for all the nodes in the cluster. It isn't easy and there is no corresponding lock for it. bitmap_cpg is only used in 2 areas: 1. Check whether the suballoc is too large for us to allocate from the global bitmap, so it is little used. And now the suballoc size is 2048, it rarely meet this situation and the check is almost useless. 2. Calculate which group a cluster belongs to. We use it during truncate to figure out which cluster group an extent belongs too. But we should be OK if we increase it though as the cluster group calculated shouldn't change and we only ever have a small bitmap_cpg on file systems with a single cluster group. Signed-off-by: NTao Ma <tao.ma@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Herbert Xu 提交于
Currently it is possible to select HW_RANDOM as a module and have hifn795x built-in. This causes a build problem because hifn795x will then call hwrng_register which isn't built-in. This patch introduces a new config option to control the hifn795x RNG which lets us avoid this problem. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Mark Fasheh 提交于
Remove 'readpages' from the list in ocfs2.txt. Instead of having two identical lists, I just removed the list in the OCFS2 section of fs/Kconfig and added a pointer to Documentation/filesystems/ocfs2.txt. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
Add ->readpages support to Ocfs2. This is rather trivial - all it required is a small update to ocfs2_get_block (for mapping full extents via b_size) and an ocfs2_readpages() function which partially mirrors ocfs2_readpage(). Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
This allows others to use the DLM constants without being tied to the function API of fs/dlm. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
Call this the "inode_lock" now, since it covers both data and meta data. This patch makes no functional changes. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-