- 19 7月, 2007 40 次提交
-
-
由 Michael Krufky 提交于
- Remove hardcoded fcv1236d tuner programmming from or51211.c - Alter dvb-bt8xx for the pcHDTV-2000 to use dvb-pll for fcv1236d support. Thanks to Jarom Hatch <jshatch@gmail.com> for testing this change. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
This patch adds support to the dvb-pll library for the Philips fcv1236d tuner, based on the FCV1236D datasheet. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Marco Gittler 提交于
The dvb_usb_device* d is not used anymore and can be removed. Signed-off-by: NMarco Gittler <g.marco@freenet.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Move internal structures and debug macros to drivers/media/video/tuner-driver.h Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Antoine Jacquet 提交于
Add Trust Powerc@m 970Z (0x06d6:0x003b) to the list of supported devices. Signed-off-by: NAntoine Jacquet <royale@zerezo.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Potentially, all board types with I2C and IR support can use an i2c based IR. Currently, the driver is selected only if bt848 or saa7134 boards are selected. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
In the function, cx88_ir_handle_key: - convert nested if statement to a switch..case block Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Edgar Pisani 提交于
Signed-off-by: NEdgar Pisani <episani@onqweb.com.au> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Jan Frey 提交于
- add support for the I2C based IR transceiver of the Hauppauge HVR-1300 - remove bad code from cx88-input.c Signed-off-by: NJan Frey <jfrey@gmx.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Wade Berrier 提交于
Fix support for 3dfx Voodoo TV 200 variant Signed-off-by: NWade Berrier <wberrier@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
We must set i2c_msg.addr in order for the autodetection test to succeed! Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Closes the issue opened on Kernel bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=8383 There's no need to print timeout without debug turned on: Apr 27 23:02:14 video kernel: cx88[1]/2-mpeg: cx8802_timeout Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
This patch removes all static dependencies on the dvb-pll module. All exported dvb_pll_desc's have been UNexported, and the caller will reference the individual dvb_pll_desc by it's index in the pll_list array. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Acked-by: NOliver Endriss <o.endriss@gmx.de> Acked-by: NManu Abraham <manu@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
'tuner_pass_ctrl' functionality of the dib3000-mb devices was broken in the previous changeset: "dibusb-mb: convert pll handling to properly use dvb-pll" This patch fixes this problem by assigning this functionality to the i2c_gate_ctrl callback Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
These two functions are no longer being used: dvb_usb_tuner_init_i2c dvb_usb_tuner_set_params_i2c This functionality has been taken over by dvb-pll Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
The last user of dvb_pll_configure was the dvb-usb function dvb_usb_tuner_calc_regs(), which was nothing more than a wrapper around dvb_pll_configure(). It's just a copy of the functionality provided by the tuner_ops calc_regs method, and can be deleted. There were two users of dvb_usb_tuner_calc_regs(). One was dvb_usb_tuner_set_params_i2c(), which is converted to use fe->ops.tuner_ops.calc_regs(). The other was the digitv driver. This driver can use one of two demods, mt352 or nxt6000. For the mt352, the driver would set tuner_ops.calc_regs to dvb_usb_tuner_calc_regs(). We can just attach dvb_pll and use the tuner_ops.calc_regs() provided by that module. For the nxt600, the driver would set tuner_ops.set_params to digitv_nxt6000_tuner_set_params. That function would in turn use dvb_usb_tuner_calc_regs(). We convert it to use tuner_ops.calc_regs() instead, and use dvb_pll_attach. The digitv_tuner_attach() needs to know which frontend was attached by digitv_frontend_attach(), since the nxt6000 needs tuner_ops.set_params() to be overridden with digitv_nxt6000_tuner_set_params(). So, to do this a digitv_state that says which frontend was used is added to the dvb_usb_device private state field. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Rafael Bilski 提交于
With previous patch card is generating MPEG audio stream too. Unfortunatly I2S audio output is muted. Unmute it. Signed-off-by: NRafal Bilski <rafalbilski@interia.pl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Rafał Bilski 提交于
Sound recording doesn't work for this card because ACNI and ACPF are not set before snd_card_saa7134_capture_prepare(). As a result timeout occurs. These registers aren't poked because thread never gets wake up signal. ACNI initialization is done in the thread. Sound is muted when capture stops. Shouldn't be because it may be used during TV playback. Signed-off-by: NRafal Bilski <rafalbilski@interia.pl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The following two pointers in struct cx8802_dev are unused - remove them: void* fe_handle; int (*fe_release)(void *handle); Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Get_dvb_firmware: update script for new location of sp8870 firmware This url is no longer valid: http://www.technotrend.de/new/217g/tt_Premium_217g.zip Replace with: http://www.softwarepatch.pl/9999ccd06a4813cb827dbb0005071c71/tt_Premium_217g.zip Thanks-to: Tobias Stoeber <tobi@to-st.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
The old service_set_out setting was still tested, even though it no longer was ever set and was in fact obsolete. This meant that everything that was written to /dev/vbi16 was ignored. Removed the service_set_out variable altogether and now it works again. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Luca Risolia 提交于
- Make the driver depend on V4L2 only (KConfig) - Better and safe locking mechanism of the device structure on open(), close() and disconnect() - Use kref for handling device deallocation - Generic cleanups Signed-off-by: NLuca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Luca Risolia 提交于
- Make the driver depend on V4L2 only (KConfig) - Better and safe locking mechanism of the device structure on open(), close() and disconnect() - Use kref for handling device deallocation - Generic cleanups Signed-off-by: NLuca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Luca Risolia 提交于
- Add support for pair OV7630+SN9C120 - Better and safe locking mechanism of the device structure on open(), close() and disconnect() - Use kref for handling device deallocation - Generic cleanups Signed-off-by: NLuca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Create static struct tuner_operations simple_tuner_ops for tuner-simple tuning function callback pointers Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Create static struct tuner_operations tea5767_tuner_ops for tea5767 tuning function callback pointers Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Create static struct tuner_operations tea5761_tuner_ops for tea5761 tuning function callback pointers Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Create static struct tuner_operations tda9887_tuner_ops for tda9887 tuning function callback pointers Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Create static struct tuner_operations tda8290_tuner_ops for tda8290 tuning function callback pointers Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Create static struct tuner_operations mt2050_tuner_ops and mt2032_tuner_ops for mt20xx tuning function callback pointers Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Move tuner callback function pointers out of struct tuner, into struct tuner_operations. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Procfs support on V4L were converted to sysfs support by a pre-2.6 patch: http://www.ussg.iu.edu/hypermail/linux/kernel/0307.1/2356.html There's no sense on keeping the dead code inside vicam.c. Also,it won't work anyway, as part of proc_fs support were previously inside videodev.c. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
CONFIG_BIGPHYS_AREA is an out-of-tree kernel patch. It makes no sense to keep supporting this on mainstream. The out-of-tree compilation with CONFIG_BIGPHYS_AREA will still be preserved at the v4l-dvb development tree at: http://linuxtv.org/hg/v4l-dvbSigned-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The line, "#include <media/tuner.h>" appears twice. This patch removes the second occurance. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
The Makefiles in the dvb directory tree used '=' when defining EXTRA_CFLAGS rather than '+=', which is far more common in the rest of the kernel source. = 14 times (9 of which this patch removes) := 25 times += 123 times This change also has certain advantages for the out of kernel v4l-dvb build system. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-