The newer SoCs have a larger range than the original SoC that this
driver was developed for. By adding the regmap config to the quirks
then the driver can initialise the managed register map correctly.
Signed-off-by: NMarcus Cooper <codekipper@gmail.com>
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

The BCLKDIV and MCLKDIV found on newer SoCs start from an offset of 1.
Add the functionality to adjust the division values according to the
needs to the device being used.
Signed-off-by: NMarcus Cooper <codekipper@gmail.com>
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Declare snd_soc_codec_driver structures as const as they are either
passed as an argument to the function snd_soc_register_codec or stored as
reference in field codec of type sun4i_codec_quirks. Both the fucntion
argument and the codec field are of type const, so declare the
structures with this property as const.
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

In preparation for the changes required to support newer SoCs then
quirks has been moved and also added to the device structure.
Signed-off-by: NMarcus Cooper <codekipper@gmail.com>
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

clk_prepare_enable() can fail here and we must check its return value.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Commit a53e35db ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.

No functional changes.

Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: alsa-devel@alsa-project.org
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

This structure is only stored in the ops field of a snd_soc_dai_driver
structure. That field is declared const, so snd_soc_dai_ops structures
that have this property can be declared as const also.
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The gpiod API checks for NULL descriptors, so there is no need to
duplicate the check in the driver.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Few GLK platform variants report a different vendor id. Add it.
Also add the missing check for GLK in is_haswell_plus().
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Codec ID is 0x1168.
It is another ALC1220 codec.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We check the availability of dma_mmap_coherent() in hw_support_mmap()
but with an ugly ifdef of lots of arch-checks.  Now we have a nice
CONFIG_ARCH_NO_COHERENT_DMA_MMAP kconfig, and this can be used
together with CONFIG_HAS_DMA check for a cleaner and more
comprehensive check.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If NO_DMA=y:

    sound/core/pcm_native.o: In function `snd_pcm_lib_default_mmap':
    pcm_native.c:(.text+0x144c): undefined reference to `bad_dma_ops'
    pcm_native.c:(.text+0x1474): undefined reference to `dma_common_mmap'

Add a check for HAS_DMA to fix this.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ISA msnd drivers have loops fetching the ring-buffer head, tail
and size values inside the loops.  Such codes are inefficient and
fragile.

This patch optimizes it, and also adds the sanity check to avoid the
endless loops.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196131
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196133Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On this Lenovo machine, there are two front mics, and both of them are
assigned the same name "Mic", but pulseaudio can't support two mics
with the same name, as a workaround, we change the location for one of
them, then the driver will assign "Front Mic" and "Mic" for them.

Cc: stable@vger.kernel.org
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Make the code like the rest of the kernel.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit dba9b7b6 ("ALSA: hda - Fix doubly initialization of
i915 component") contained a typo that leads to the unbalance of i915
module reference.  The value to be checked is not chip->driver_type
but chip->driver_caps.

Fixes: dba9b7b6 ("ALSA: hda - Fix doubly initialization of i915 component")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196219Reported-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For driver debugfs, debugfs_remove_recursive() is called which is not
needed as it is already done in ASoC core debugfs. And a device managed
memory need not be freed explicitly as device core frees it up. So
remove unnecessary skl_debugfs_exit().

Fixes: 5cdf6c09 ASoC: ("Intel: Skylake: Add debugfs support")
Reported-by: NJulia Lawall <julia.lawall@lip6.fr>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Commit bdd0384a ("ASoC: Intel: Skylake: Add support to read firmware
registers") introduced firmware register read so added sst-dsp-priv.h but
missed adding sst-dsp.h as that leads to below compiler warning:

   In file included from sound/soc/intel/skylake/skl-debug.c:23:0:
>> sound/soc/intel/skylake/../common/sst-dsp-priv.h:63:42: warning:
'struct sst_pdata' declared inside parameter list [enabled by default]
     int (*init)(struct sst_dsp *sst, struct sst_pdata *pdata);
                                             ^
>> sound/soc/intel/skylake/../common/sst-dsp-priv.h:63:42: warning:
its scope is only this definition or declaration, which is probably
not what you want [enabled by default]

So add the missing header.

Fixes: bdd0384a ("ASoC: Intel: Skylake: Add support to read firmware registers")
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

GPIO_MASK was introduced in commit "df694daa [ALSA] hda-codec - Add
the support of ALC262,ALC883,ALC885,ALC861" but it's not being used. So
we can simply remove it.
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The PIN number for Dell headset mode of ALC3271 is wrong.

Fixes: fcc6c877 ("ALSA: hda/realtek - Support Dell headset mode for ALC3271")
Signed-off-by: NShih-Yuan Lee (FourDollars) <sylee@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

platform_get_irq() returns an error code, but the ac97c
driver ignores it and always returns -ENXIO. This is not correct,
and prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error.

Print and propagate the return value of platform_get_irq on failure.
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

platform_get_irq() returns an error code, but the intel_hdmi_audio
driver ignores it and always returns -ENODEV. This is not correct,
and prevents -EPROBE_DEFER from being propagated properly. Also,
notice that platform_get_irq() no longer returns 0 on error.

Print error message and propagate the return value of platform_get_irq
on failure.
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds debugfs support to read fw registers, mailbox
offsets and sram address.
Signed-off-by: NMousumi Jana <mousumix.jana@intel.com>
Signed-off-by: NRamesh Babu <ramesh.babu@intel.com>
Signed-off-by: NJayachandran B <jayachandran.b@intel.com>
Signed-off-by: NPardha Saradhi K <pardha.saradhi.kesapragada@intel.com>
Signed-off-by: NVunny Sodhi <vunnyx.sodhi@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

SRAM address and memory window size differ for different platforms.
So add members to sst_addr structure and initialize them in the
respective dsp_init().
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Driver modules have lot of information represented in struct
skl_module_cfg. Knowing this is useful for debug, so enable
debugfs for this structure.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NVunny Sodhi <vunnyx.sodhi@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For debug, the kernel debugfs mechanism is available. We can add various
debug options for driver like module configuration read, firmware register
read etc.

This patch adds debugfs as a child to asoc plaform component and caller is
added for skylake driver to do init and cleanup of debugfs.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NVunny Sodhi <vunnyx.sodhi@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

sound/soc/soc-core.c:1961:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: 98faf436 ("ASoC: Drop invalid DMI fields when setting card long name from DMI info")
CC: Mengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For making the development easier, add quirk module option to override
the platform data setup.  For example, a platform with inverted jack
detection with jd_mode=2, pass the value 0x21 (0x1 = inv_jd1_1, 0x20 =
jd_mode=2).  It overrides the whole pdata fields, so pass it
carefully.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Tested-by: NJames Cameron <quozl@laptop.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Don't populate the arrays path and cmd_case on the stack but make
them static const.  Makes the object code smaller:

Before:
   text    data     bss     dec     hex filename
   2673     624       0    3297     ce1 sound/soc/sh/rcar/cmd.o

After:
   text    data     bss     dec     hex filename
   2398     768       0    3166     c5e sound/soc/sh/rcar/cmd.o
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

It's very common that audio card has a machine level amplifier which is
controlled by GPIO.  The patch adds DAPM widgets and routing support
into audio-graph-card driver, and creates an output driver widget with
event to control the amplifier via GPIO.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

We will set some volatile registers in jack detection function. But
those volatile registers will be clear in rt5665_calibrate function
because we set cache bypass and reset codec in rt5665_calibrate function.
This patch add a flag to make sure that rt5665_calibrate is done
before starting jack detection.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

dev_pm_ops are not supposed to change at runtime. All functions
working with dev_pm_ops provided by <linux/device.h> work with const
dev_pm_ops. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   8172	    920	      0	   9092	   2384	sound/soc/sh/rcar/core.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   8364	    728	      0	   9092	   2384	sound/soc/sh/rcar/core.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The property type of "nuvoton,crosstalk-bypass" changes to boolean.
The document is updated as well.
Signed-off-by: NJohn Hsu <KCHSU0@nuvoton.com>
Signed-off-by: NJohn Hsu <supercraig0719@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The first parameter is codec not dai.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add some DAPM widget types to better support the construction of DAPM
graphs within DSPs.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Makes the debug output much more useful.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

SND_SOC_TPLG_INDEX_ALL is used by drivers to tell the core to load
all topology component indexes, not just the index in the header.
Fix this so that SND_SOC_TPLG_INDEX_ALL will load all components no matter
their index.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Don't populate the arrays fs_list and ps_list on the stack but make
them static const.  Makes the object code smaller:

Before:
   text    data     bss     dec     hex filename
  12084    4888      64   17036    428c sound/soc/codecs/ak4642.o

After:
   text    data     bss     dec     hex filename
  11883    5032      64   16979    4253 sound/soc/codecs/ak4642.o
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add new codecs support for ALC215 ALC285 ALC289.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

0x0285 Device ID was not used.
It just assigned for alias of ALC293 as backup.
So, remove it first.
Because our new codec will use this device ID.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>