- 17 3月, 2007 40 次提交
-
-
由 Thomas Gleixner 提交于
I finally found a dual core box, which survives suspend/resume without crashing in the middle of nowhere. Sigh, I never figured out from the code and the bug reports what's going on. The observed hangs are caused by a stale state transition of the clock event devices, which keeps the RCU synchronization away from completion, when the non boot CPU is brought back up. The suspend/resume in oneshot mode needs the similar care as the periodic mode during suspend to RAM. My assumption that the state transitions during the different shutdown/bringups of s2disk would go through the periodic boot phase and then switch over to highres resp. nohz mode were simply wrong. Add the appropriate suspend / resume handling for the non periodic modes. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPV6]: ipv6_fl_socklist is inadvertently shared. [TCP]: Fix tcp_mem[] initialization. [NET]: Copy mac_len in skb_clone() as well [IPV4]: Do not disable preemption in trie_leaf_remove().
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Get DEBUG_PAGEALLOC working again.
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Kconfig: Move missplaced NR_CPUS default from SMTC to VSMP. [MIPS] Lockdep: Fix recursion bug. [MIPS] RTLX: Handle copy_*_user return values. [MIPS] RTLX: Protect rtlx_{read,write} with mutex. [MIPS] RTLX: Harden against compiler reordering and optimization. [MIPS] RTLX: Don't use volatile; it's fragile. [MIPS] Lasat: Downgrade 64-bit kernel from experimental to broken. [MIPS] Compat: Fix build if CONFIG_SYSVIPC is disabled. [CHAR] lcd: Fix two warnings. [MIPS] FPU ownership management & preemption fixes [MIPS] Check FCSR for pending interrupts, alternative version [MIPS] IP27, IP35: Fix warnings.
-
由 Thomas Gleixner 提交于
The maximum seconds value we can handle on 32bit is LONG_MAX. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeremy Fitzhardinge 提交于
Fix typo in sync_constant_test_bit()'s name, so sync_bitops.h is consistent with bitops.h Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NChris Wright <chrisw@sous-sol.org> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnaud Patard (Rtp 提交于
The set_cs field of struct s3c24xx_spi is declared as returning a int but the value returned but set_cs is never fixed. Moreover, the default function for set_cs and the set_cs defintion in the platform data are returning void. I'm proposing to change the prototype to void (*set_cs)(...). By doing this, I'm also fixing 2 build warnings: drivers/spi/spi_s3c24xx.c: In function 's3c24xx_spi_probe': drivers/spi/spi_s3c24xx.c:330: warning: assignment from incompatible pointer type drivers/spi/spi_s3c24xx.c:335: warning: assignment from incompatible pointer type Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 James Bottomley 提交于
This bug was seen on ppc64, but it could have occurred on any architecture with a page size of 64k or above. The problem is that in fs/binfmt_elf.c:randomize_stack_top() randomizes the stack to within 0x7ff pages. On 4k page machines, this is 8MB; on 64k page boxes, this is 128MB. The problem is that the new binary layout (selected in arch_pick_mmap_layout) places the mapping segment 128MB or the stack rlimit away from the top of the process memory, whichever is larger. If you chose an rlimit of less than 128MB (most defaults are in the 8Mb range) then you can end up having your entire stack randomized away. The fix is to make randomize_stack_top() only steal at most 8MB, which this patch does. However, I have to point out that even with this, your stack rlimit might not be exactly what you get if it's > 128MB, because you're still losing the random offset of up to 8MB. The true fix should be to leave an explicit gap for the randomization plus a buffer when determining mmap_base, but that would involve fixing all the architectures. Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zilvinas Valinskas 提交于
Fixes a bogus lockdep warning which causes lockdep to disable itself. Acked-by: NIngo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ankita Garg 提交于
Looking at oom_kill.c, found that the intention to not kill the selected process if any of its children/siblings has OOM_DISABLE set, is not being met. Signed-off-by: NAnkita Garg <ankita@in.ibm.com> Acked-by: NNick Piggin <npiggin@suse.de> Acked-by: NWilliam Irwin <wli@holomorphy.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Berg 提交于
Remove the misleading "Presently only useful on the IA-64 platform" text from the EFI partition Kconfig. EFI partitions are also used by Apple on their Intel-based machines and thus you need EFI partition support if you (for example) want to attach such a machine in target disk mode. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NMatt Domsch <Matt_Domsch@dell.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
Testing of -rt by IBM uncovered a locking bug in wake_futex_pi(): the PI state needs to be locked before we access it. Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Marcel Selhorst 提交于
Signed-off-by: NMarcel Selhorst <tpm@selhorst.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bernhard Walle 提交于
Initialise the SAK member of the vc_cons variable on all virtual terminals, not only the first one. This prevents an oops when trying Sysrq-C on e.g. the second virtual terminal: kernel BUG at kernel/workqueue.c:212! invalid opcode: 0000 [1] SMP CPU 0 Modules linked in: i915 drm deflate zlib_deflate twofish twofish_common serpent blowfish des ce Pid: 0, comm: swapper Not tainted 2.6.21-rc3-default #15 RIP: 0010:[<ffffffff8028c955>] [<ffffffff8028c955>] queue_work+0x32/0x51 RSP: 0018:ffffffff805fada8 EFLAGS: 00010013 RAX: ffffffff80683f38 RBX: ffffffff804ae700 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff80683f30 RDI: ffff81000134a840 RBP: 0000000000000001 R08: 0000000000000005 R09: 0000000000000002 R10: ffffffff805990e0 R11: ffff810037f4c0f0 R12: 000000000000006b R13: ffff81007aa23000 R14: 0000000000000001 R15: 0000000000000096 FS: 0000000000000000(0000) GS:ffffffff804d8000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00002b72026e9000 CR3: 0000000079175000 CR4: 00000000000006e0 Process swapper (pid: 0, threadinfo ffffffff8059e000, task ffffffff80490840) Stack: 0000000000000096 ffffffff803635db ffffffff805fadf8 0000000000000001 ffff8100013c2e40 0000000000000025 ffff81007c931c00 ffff81007aa23000 0000000000000001 ffffffff8035e3ee 0000000000000092 ffff810037cc8000 Call Trace: <IRQ> [<ffffffff803635db>] __handle_sysrq+0x98/0x129 [<ffffffff8035e3ee>] kbd_event+0x32e/0x56a [<ffffffff8037d502>] input_event+0x422/0x44a [<ffffffff80381d71>] atkbd_interrupt+0x449/0x503 [<ffffffff8037a42d>] serio_interrupt+0x37/0x6f [<ffffffff8037affb>] i8042_interrupt+0x1f4/0x20a [<ffffffff8026bd20>] smp_send_timer_broadcast_ipi+0x2d/0x4e [<ffffffff8020eee5>] handle_IRQ_event+0x25/0x53 [<ffffffff802a924c>] handle_edge_irq+0xe4/0x128 [<ffffffff802562ac>] call_softirq+0x1c/0x28 [<ffffffff802632eb>] do_IRQ+0x6c/0xd3 [<ffffffff8024f4e7>] mwait_idle+0x0/0x45 [<ffffffff80255631>] ret_from_intr+0x0/0xa <EOI> [<ffffffff80248a4d>] datagram_poll+0x0/0xc8 [<ffffffff8024f529>] mwait_idle+0x42/0x45 [<ffffffff80242c05>] cpu_idle+0x8b/0xae [<ffffffff805a8779>] start_kernel+0x2b9/0x2c5 [<ffffffff805a815e>] _sinittext+0x15e/0x162 Code: 0f 0b eb fe 48 8b 07 48 63 d2 48 f7 d0 48 8b 3c d0 e8 13 ff RIP [<ffffffff8028c955>] queue_work+0x32/0x51 RSP <ffffffff805fada8> Kernel panic - not syncing: Aiee, killing interrupt handler! Signed-off-by: NBernhard Walle <bwalle@suse.de> Acked-by: NEric Biederman <ebiederm@xmission.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stefano Brivio 提交于
We need vid_which_vrm and vid_from_reg in the w83793 module. Signed-off-by: NStefano Brivio <stefano.brivio@polimi.it> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Trond Myklebust 提交于
Looks like we need a check in nfs_getattr() for a regular file. It makes no sense to call nfs_sync_mapping_range() on anything else. I think that should fix your problem: it will stop the NFS client from interfering with dirty pages on that inode's mapping. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Acked-by: NOlof Johansson <olof@lixom.net> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
The current NFS client congestion logic is severly broken, it marks the backing device congested during each nfs_writepages() call but doesn't mirror this in nfs_writepage() which makes for deadlocks. Also it implements its own waitqueue. Replace this by a more regular congestion implementation that puts a cap on the number of active writeback pages and uses the bdi congestion waitqueue. Also always use an interruptible wait since it makes sense to be able to SIGKILL the process even for mounts without 'intr'. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 suzuki 提交于
The only error code which comes from the partition checkers is -1, when they finds an EIO. As per the discussion, ENOMEM values were ignored, as they might scare the users. So, with the current code, we end up returning -1 and not EIO for the ioctl() calls. Which doesn't give any clue to the user of what went wrong. Signed-off-by: NSuzuki K P <suzuki@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Johnson 提交于
When the console is in VT_AUTO+KD_GRAPHICS mode, switching to the SUSPEND_CONSOLE fails, resulting in vt_waitactive() waiting indefinitely or until the task is interrupted. This patch tests if a console switch can occur in set_console() and returns early if a console switch is not possible. [akpm@linux-foundation.org: cleanup] Signed-off-by: NAndrew Johnson <ajohnson@intrinsyc.com> Acked-by: NPavel Machek <pavel@ucw.cz> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vasily Averin 提交于
smbfs allocates rq_trans2buffer to handle server's multi transaction2 response messages. As struct smb_request may be reused, rq_trans2buffer is freed before each new request. However if last servers's response is not multi but single trans2 message then new rq_trans2buffer is not allocated but last smb_rput still tries to free it again. To prevent this issue rq_trans2buffer pointer should be set to NULL after kfree. Signed-off-by: NVasily Averin <vvs@sw.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Frame buffer device drivers that cannot be built as modules must depend on `FB = y'. Correct the 3 remaining offenders. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
ecryptfs_d_release() first dereferences a pointer (via ecryptfs_dentry_to_lower()) and then afterwards checks to see if the pointer it just dereferenced is NULL (via ecryptfs_dentry_to_private()). This patch moves all of the work done on the dereferenced pointer inside a block governed by the condition that the pointer is non-NULL. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
commit f4304ab2 (HZ free NTP) moved the access to wall_to_monotonic in hrtimer_get_softirq_time() out of the xtime_lock protection. Move it back into the seq_lock section. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NJohn Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Atsushi Nemoto 提交于
Prevents a potential oops with CONFIG_SPI_DEBUG given flakey hardware or incorrect configuration. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
hrtimer_forward() does not check for the possible overflow of timer->expires. This can happen on 64 bit machines with large interval values and results currently in an endless loop in the softirq because the expiry value becomes negative and therefor the timer is expired all the time. Check for this condition and set the expiry value to the max. expiry time in the future. The fix should be applied to stable kernel series as well. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Antonino A. Daplas 提交于
SavagePrintRegs() requires struct savagefb_par. Signed-off-by: NAntonino Daplas <adaplas@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Antonino A. Daplas 提交于
This is a hack that seems to kick start the 2D engine of the Savage IX in some Toshiba laptops. Without this, the laptop starts with a black screen and occasionally crashes X. Signed-off-by: NAntonino Daplas <adaplas@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ondrej Zajicek 提交于
Pixclock setting in sstfb didn't work with my Voodoo 2 card with ICS 5342 DAC (this DAC requires two consecutive writes to one of its registers to program pixclock - maybe first write merged with second). Signed-off-by: NOndrej Zajicek <santiago@crfreenet.org> Signed-off-by: NAntonino Daplas <adaplas@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
It's been pointed out that output GPIOs should have an initial value, to avoid signal glitching ... among other things, it can be some time before a driver is ready. This patch corrects that oversight, fixing - documentation - platforms supporting the GPIO interface - users of that call (just one for now, others are pending) There's only one user of this call for now since most platforms are still using non-generic GPIO setup code, which in most cases already couples the initial value with its "set output mode" request. Note that most platforms are clear about the hardware letting the output value be set before the pin direction is changed, but the s3c241x docs are vague on that topic ... so those chips might not avoid the glitches. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NAndrew Victor <andrew@sanpeople.com> Acked-by: NMilan Svoboda <msvoboda@ra.rockwell.com> Acked-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Lesiak 提交于
Fix a bug in the cleanup of an spi_bitbang bus. The workqueue associated with the bus was destroyed before the call to spi_unregister_master. That meant that spi devices on that bus would be unable to do IO in their remove method. The shutdown flag should have been able to prevent a segfault, but was never getting set. By waiting to destroy the workqueue until after the master is unregistered, devices are able to do IO in their remove methods. An added benefit is that neither the shutdown flag nor a wait for the queue of messages to empty is needed. Signed-off-by: NChris Lesiak <chris.lesiak@licor.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zach Brown 提交于
This patch fixes a user-triggerable oops that was reported by Leonid Ananiev as archived at http://lkml.org/lkml/2007/2/8/337. dio writes invalidate clean pages that intersect the written region so that subsequent buffered reads go to disk to read the new data. If this fails the interface tries to tell the caller that the cache is inconsistent by returning EIO. Before this patch we had the problem where this invalidation failure would clobber -EIOCBQUEUED as it made its way from fs/direct-io.c to fs/aio.c. Both fs/aio.c and bio completion call aio_complete() and we reference freed memory, usually oopsing. This patch addresses this problem by invalidating before the write so that we can cleanly return -EIO before ->direct_IO() has had a chance to return -EIOCBQUEUED. There is a compromise here. During the dio write we can fault in mmap()ed pages which intersect the written range with get_user_pages() if the user provided them for the source buffer. This is a crazy thing to do, but we can make it mostly work in most cases by trying the invalidation again. The compromise is that we won't return an error if this second invalidation fails if it's an AIO write and we have -EIOCBQUEUED. This was tested by having two processes race performing large O_DIRECT and buffered ordered writes. Within minutes ext3 would see a race between ext3_releasepage() and jbd holding a reference on ordered data buffers and would cause invalidation to fail, panicing the box. The test can be found in the 'aio_dio_bugs' test group in test.kernel.org/autotest. After this patch the test passes. Signed-off-by: NZach Brown <zach.brown@oracle.com> Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org> Cc: Leonid Ananiev <leonid.i.ananiev@linux.intel.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
madvise(MADV_REMOVE) can go into an infinite loop or cause an oops if the call covers a region from the start of a vma, and extending past that vma. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Badari Pulavarty <pbadari@us.ibm.com> Acked-by: NHugh Dickins <hugh@veritas.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Evgeniy Dushistov 提交于
During modification of code to support UFS2 writing, the case with "three indirect" blocks in truncate path was missed, this patch fixes this situation. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Evgeniy Dushistov 提交于
This patch fix behaviour in such test scenario: lseek(fd, BIG_OFFSET) write(fd, buf, sizeof(buf)) truncate(BIG_OFFSET) truncate(BIG_OFFSET + sizeof(buf)) read(fd, buf...) Because of if file big enough(BIG_OFFSET) we start allocate space by block, ordinary block size > page size, so we should zeroize the rest of block in truncate(except last framgnet, about which VFS should care), to not get garbage, when we extend file. Also patch corrects conversion from pointer to block to physical block number, this helps in case of not common used UFS types. And add to debug output inode number. Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Evgeniy Dushistov 提交于
This fixes "change blocks numbers on the fly" in case when "prepare write page" is in the call chain, in this case some buffers may be not uptodate and not mapped, we should care to map them and load from disk. This patch was tested with: - ufs regressions simple tests - fsx-linux - ltp(20060306) - untar and build kernel Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Evgeniy Dushistov 提交于
This patch corrects work with time in UFS2 case. 1) According to UFS2 disk layout modification/access and so on "time" should be hold in two variables one 64bit for seconds and another 32bit for nanoseconds, at now for some unknown reason we suppose that "inode time" holds in three variables 32bit for seconds, 32bit for milliseconds and 32bit for nanoseconds. 2) We set amount of nanoseconds in "VFS inode" to 0 during read, instead of getting values from "on disk inode"(this should close http://bugzilla.kernel.org/show_bug.cgi?id=7991). Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Cc: Bjoern Jacke <bjoern@j3e.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
Prevent the WARN_ON() in arch/x86_64/kernel/acpi/sleep.c:init_low_mapping() from triggering by disabling nonboot CPUs before we finally enter the platform suspend. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
If swsusp is using the platform mode during the resume and the image cannot be read, the platform mode should be switched off before software_resume() returns. Make it happen. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
This removes several pointless exports from drivers/dma/dmaengine.c; the dma_async_memcpy_*() functions are inlined by <linux/dmaengine.h> so those exports are inappropriate. It also moves the existing EXPORT_SYMBOL declarations next to their functions, so it's now trivial to confirm one-to-one correspondence between exports and nonstatic symbols. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Acked-by: NChris Leech <christopher.leech@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andy Isaacson 提交于
When iterating through an array, one must be careful to test one's index variable rather than another similarly-named variable. The loop will read off the end of conf->disks[] in the following (pathological) case: % dd bs=1 seek=840716287 if=/dev/zero of=d1 count=1 % for i in 2 3 4; do dd if=/dev/zero of=d$i bs=1k count=$(($i+150)); done % ./vmlinux ubd0=root ubd1=d1 ubd2=d2 ubd3=d3 ubd4=d4 # mdadm -C /dev/md0 --level=linear --raid-devices=4 /dev/ubd[1234] adding some printks, I saw this: [42949374.960000] hash_spacing = 821120 [42949374.960000] cnt = 4 [42949374.960000] min_spacing = 801 [42949374.960000] j=0 size=820928 sz=820928 [42949374.960000] i=0 sz=820928 hash_spacing=820928 [42949374.960000] j=1 size=64 sz=64 [42949374.960000] j=2 size=64 sz=128 [42949374.960000] j=3 size=64 sz=192 [42949374.960000] j=4 size=1515870810 sz=1515871002 Cc: Gautham R Shenoy <ego@in.ibm.com> Acked-by: NNeil Brown <neilb@cse.unsw.edu.au> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-