- 08 5月, 2007 2 次提交
-
-
由 Atsushi Nemoto 提交于
Those boards do not need CONFIG_ISA if the ne driver could be selectable without it. Disable it and update a defconfig. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Thomas Koeller 提交于
Add support for the integrated serial ports of the MIPS RM9122 processor and its relatives. The patch also does some whitespace cleanup. [akpm@linux-foundation.org: cleanups] Signed-off-by: NThomas Koeller <thomas.koeller@baslerweb.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 4月, 2007 5 次提交
-
-
由 Yoichi Yuasa 提交于
This patch has removed 2 select entries for VR41xx. These entries are selected in arch/mips/vr41xx/Kconfig. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
This patch has renamed VR41XX to VR4100 series. That's better. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
* Kill dead codes * Rearrange irq chip handlers * Minimize defconfig Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
This patch has merged GT64111 PCI routines and GT64120 PCI_0 routines. GT64111 PCI is almost the same as GT64120's PCI_0. This patch don't change GT64120 PCI routines. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 30 3月, 2007 1 次提交
-
-
由 Ralf Baechle 提交于
So until MIPS_MT_SMTC_INSTANT_REPLAY has been rewritten to solve this issue, don't allow selecting it with PREEMPT. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 20 3月, 2007 1 次提交
-
-
由 Atsushi Nemoto 提交于
Might be useful for SMP debugging. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> [Rewritten Kconfig bits to deal better fit in the usual pattern of doing things - Ralf] Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 17 3月, 2007 2 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 14 3月, 2007 1 次提交
-
-
由 Ralf Baechle 提交于
A defconfig file and the 10 lines of code (including comments ...) that are rotting since lmo commit 6516a42dc8b40c6c00010346dd51496125b16644 don't quite make proper support, so let's trash it. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 07 3月, 2007 1 次提交
-
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 05 3月, 2007 2 次提交
-
-
由 Ralf Baechle 提交于
early_printk is a so much saner thing. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
The generic rtc-ds1742 driver can be used for RBTX4927 and JMR3927 (with __swizzle_addr trick). This patch also removes MIPS local DS1742 stuff. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 27 2月, 2007 1 次提交
-
-
由 Thomas Koeller 提交于
This change is purely cosmetical. Signed-off-by: NThomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 22 2月, 2007 1 次提交
-
-
由 Franck Bui-Huu 提交于
This patch adds trivial support for SMARTMIPS extension. This extension is currently implemented by 4KS[CD] CPUs. Basically it saves/restores ACX register, which is part of the SMARTMIPS ASE, when needed. This patch does *not* add any support for Smartmips MMU features. Futhermore this patch does not add explicit support for 4KS[CD] CPUs since they are respectively mips32 and mips32r2 compliant. So with the current processor configuration, a platform that has such CPUs needs to select both configs: CPU_HAS_SMARTMIPS SYS_HAS_CPU_MIPS32_R[12] This is due to the processor configuration which is mixing up all the architecture variants and the processor types. The drawback of this, is that we currently pass '-march=mips32' option to gcc when building a kernel instead of '-march=4ksc' for 4KSC case. This can lead to a kernel image a little bit bigger than required. Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 20 2月, 2007 1 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 19 2月, 2007 1 次提交
-
-
由 Thomas Bogendoerfer 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 14 2月, 2007 1 次提交
-
-
由 Ralf Baechle 提交于
Platforms will now have to supply a function dma_device_is_coherent which returns if a particular device participates in the coherence domain. For most platforms this function will always return 0 or 1. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 12 2月, 2007 1 次提交
-
-
由 Christoph Lameter 提交于
As Andi pointed out: CONFIG_GENERIC_ISA_DMA only disables the ISA DMA channel management. Other functionality may still expect GFP_DMA to provide memory below 16M. So we need to make sure that CONFIG_ZONE_DMA is set independent of CONFIG_GENERIC_ISA_DMA. Undo the modifications to mm/Kconfig where we made ZONE_DMA dependent on GENERIC_ISA_DMA and set theses explicitly in each arches Kconfig. Reviews must occur for each arch in order to determine if ZONE_DMA can be switched off. It can only be switched off if we know that all devices supported by a platform are capable of performing DMA transfers to all of memory (Some arches already support this: uml, avr32, sh sh64, parisc and IA64/Altix). In order to switch ZONE_DMA off conditionally, one would have to establish a scheme by which one can assure that no drivers are enabled that are only capable of doing I/O to a part of memory, or one needs to provide an alternate means of performing an allocation from a specific range of memory (like provided by alloc_pages_range()) and insure that all drivers use that call. In that case the arches alloc_dma_coherent() may need to be modified to call alloc_pages_range() instead of relying on GFP_DMA. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 2月, 2007 1 次提交
-
-
由 Sergei Shtylyov 提交于
Toshiba JMR3927 (RBHMA3100) and RBTX49[23]7 (RBHMA4[24]00) do support both little and big endian mode (if you flash the right PMON). Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 10 2月, 2007 1 次提交
-
-
由 Ralf Baechle 提交于
Also convert to use generic kernel/power/Kconfig to make the use of the shared APM emulation possible. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 07 2月, 2007 2 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Currently KEXEC is in "Machine selection", SECCOMP, PM, APM are in "Executable file formats" menu. Move KEXEC and SECCOMP to "Kernel type" and PM, APM to new "Power management options" menu. Also replace "config PM" with kernel/power/Kconfig. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 24 1月, 2007 1 次提交
-
-
由 Ralf Baechle 提交于
SMTC pseudo-interrupts between TCs are deferred and queued if the target TC is interrupt-inhibited (IXMT). In the first SMTC prototypes, these queued IPIs were serviced on return to user mode, or on entry into the kernel idle loop. The INSTANT_REPLAY option dispatches them as part of local_irq_restore() processing, which adds runtime overhead (hence the option to turn it off), but ensures that IPIs are handled promptly even under heavy I/O interrupt load. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 09 12月, 2006 4 次提交
-
-
由 Vitaly Wool 提交于
Signed-off-by: NVitaly Wool <vitalywool@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Now that i8259A_chip uses new irq flow handler select GENERIC_HARDIRQS_NO__DO_IRQ on some more platforms. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Howells 提交于
This facility provides three entry points: ilog2() Log base 2 of unsigned long ilog2_u32() Log base 2 of u32 ilog2_u64() Log base 2 of u64 These facilities can either be used inside functions on dynamic data: int do_something(long q) { ...; y = ilog2(x) ...; } Or can be used to statically initialise global variables with constant values: unsigned n = ilog2(27); When performing static initialisation, the compiler will report "error: initializer element is not constant" if asked to take a log of zero or of something not reducible to a constant. They treat negative numbers as unsigned. When not dealing with a constant, they fall back to using fls() which permits them to use arch-specific log calculation instructions - such as BSR on x86/x86_64 or SCAN on FRV - if available. [akpm@osdl.org: MMC fix] Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Howells <dhowells@redhat.com> Cc: Wojtek Kaniewski <wojtekka@toxygen.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 12月, 2006 1 次提交
-
-
由 Franck Bui-Huu 提交于
__do_IRQ() is needed only by irq handlers that can't use default handlers defined in kernel/irq/chip.c. For others platforms there's no need to compile this function since it won't be used. For those platforms this patch defines GENERIC_HARDIRQS_NO__DO_IRQ symbol which is used exactly for this purpose. Futhermore for platforms which do not use __do_IRQ(), end() method which is part of the 'irq_chip' structure is not used. This patch simply removes this method in this case. Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 05 12月, 2006 3 次提交
-
-
由 Ralf Baechle 提交于
Also the R4000 / R4600 LL/SC instructions imply a sync so no explicit sync needed. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
N32 SysV IPC system calls should use 32-bit compatible code. arch/mips/kernel/linux32.c have similar compatible code for O32, but ipc/compat.c seems more complete. We can use it for both N32 and O32. This patch should fix these problems (and other possible problems): http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1149188824.6986.6.camel%40diimka-laptop http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=44C6B829.8050508%40caviumnetworks.comSigned-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 30 11月, 2006 3 次提交
-
-
由 Matt LaPlante 提交于
Fix various Kconfig typos. Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Nicolas Schichan 提交于
A tiny userland application loading the kernel and invoking kexec_load for mips is available here: http://chac.le-poulpe.net/~nico/kexec/kexec-2006-10-18.tar.gzSigned-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 03 11月, 2006 3 次提交
-
-
由 Ralf Baechle 提交于
When lmo commit 4ef893e0515e8bf336dfbd200884f244869fbb43 was merged to kernel.org as e73ea273 patch happily applied the IP27 segment to IP22. f63f36c18b11e166d0f362ac04dbcd7e6ea23f9e did fix the effects partially - and with a wrong log message. Now fixed for real (tm). Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Patch happily applied an Ocelot G patch to Ocelot C when merging linux-mips.org changeset 91ee9a801e65d2981dfe327d2519c7fc6ab02e6b into kernel.org as 6ceb6d3a. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This reverts commit 31473747. Another amazing example of patch(1) messing up - lmo changeset 66e8560d11d02bcadc261498471831a6375ad046 was merged twice to kernel.org and ended up doing this rubbish job. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-