- 01 7月, 2006 1 次提交
-
-
由 Saqeb Akhter 提交于
The set_voltage function in cx24123.c was corrected to match how it is described in the CX24123 specs, producing the correct behaviour for cards that require it. Acked-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NSaqeb Akhter <johoja@gmail.com> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 25 6月, 2006 3 次提交
-
-
由 Patrick Boettcher 提交于
V4L/DVB (4028): Change dvb_frontend_ops to be a real field instead of a pointer field inside dvb_frontend The dvb_frontend_ops is a pointer inside dvb_frontend. That's why every demod-driver is having a field of dvb_frontend_ops in its private-state-struct and using the reference for filling the pointer-field in dvb_frontend. - It saves at least two lines of code per demod-driver, - reduces object size (one less dereference per frontend_ops-access), - be coherent with dvb_tuner_ops, - makes it a little bit easier for newbies to understand how it works and - avoids stupid mistakes because you would have to copy the dvb_frontend_ops always, before you could assign the static pointer directly, which was dangerous. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andrew de Quincey 提交于
Rework diseqc support to be more in line with the other demod drivers. Fix Nova-S-Plus/Nova-SE2 diseqc. Cleanup API. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andrew de Quincey 提交于
Convert to tuner_ops calls. Remove pll function pointers from structure. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 13 5月, 2006 5 次提交
-
-
由 Yeasah Pell 提交于
*) Allow forcing the bandselect value with a module parameter to facilitate determining the correct bandselect frequencies. *) Changes the bandselect frequency thresholds based on experiments with the above parameter in conjunction with the values in the spec. Signed-off-by: Yeasah Pell <yeasah at schwide.net> Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Yeasah Pell 提交于
*) Sets an additional tuner parameter (demodulator sample gain) that wasn't being set before. *) Removes the low symbol rate tuner parameter tweaks in the previous patch -- it appears those tweaks are not necessary with the demodulator sample gain set correctly. *) Cleanup and document the demodulator register initialization sequence. *) Change set_fec routine to disable FEC auto scan when a specific code rate is selected. *) Remove error message when reported FEC is invalid (which happens sometimes when the card has no signal) Signed-off-by: Yeasah Pell <yeasah at schwide.net> Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Yeasah Pell 提交于
The previous DISEQC code didn't wait, so it was unreliable Signed-off-by: Yeasah Pell <yeasah at schwide.net> Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Current debug messages at cx24123 are next to useless, since they don't print the values sent/read to registers. With this patch, debug=1 will show comprehensive messages. debug=2 will show also read/write operations at I2C bus. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
-
由 Vadim Catana 提交于
- fixed the reception of channels with low symbol rates. ( The VGA1 and VGA2 offsets recommended by cx24109 docs for symbol rates from 1 to 5 MSps do not work. I changed them to values found experimentally. The charge pump current and FILTUNE voltage are now set to values recommended in the docs. This improves reception for symbol rates < 15 MSps. The values written in the SYSSymbolRate registers are calculated with better precision. ) - fixed the cx24123_get_fec() function. It was returning the values for DCII mode. - removed some unused variables Signed-off-by: Vadim Catana <skystar at moldova.cc> Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 1月, 2006 4 次提交
-
-
由 Steven Toth 提交于
- Cleanup timeout handling in cx24123_pll_writereg(), and use a reasonable value for the timeout. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Vadim Catana 提交于
- Add support for KWorld DVB-S 100, based on the same chips as Hauppauge Nova-S Plus (CX23883/CX24123/CX24109), without the Intersil ISL6421, which is used for LNB control. - LNB voltage and tone are controled by LNBDC and LNBTone bits from register 0x29 of the CX24123 demodulator. - The MO_GP0_IO register from CX23883 is used to turn LNB power on and off. Signed-off-by: NVadim Catana <skystar@moldova.cc> Acked-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Johannes Stezenbach 提交于
- Minor cleanups. Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steve Toth 提交于
- Added demodulator driver for Nova-S-Plus and Nova-SE2 DVB-S support. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-