Fold intel_pipe_set_base() in the update primary plane path merging
pieces of code that are common to both paths.

Basically the the pin/unpin procedures are the same for both paths
and some checks can also be shared (some of the were moved to the
check() stage)

v2: take Ville's comments:
	- remove unnecessary plane check
	- move mutex lock to inside the conditional
	- make the pin fail message a debug one
	- add a fixme for the fastboot hack
	- call intel_frontbuffer_flip() after FBC update

v3: take more Ville's comments:
	- fold update code under if (intel_crtc->active), and do the
	visible/!visible split inside.
	- check ret inside the same conditional we assign it

v4: don't use intel_enable_primary_hw_plane(), the primary_enabled
check inside will break page flips

v5: take more Ville's comments:
	- set primary_enabled to true and add BDW hack
	- unify if (old_fb) and if (old_fb != fb)

v6: take more Ville's comments:
	- make was_primary bool and fix its check
	- add the BDW vblank wait comment
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As stated in the few previous commits, IS_ULT/ULX() is better
per-platform as it has different consequences depending on the platform.

We now can get rid of it.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

IS_ULT() wasn't taking into account SKL so we had a warn with SPT-LP.

We don't realy need those checks here, and as we don't need to introduce
IS_SKL_ULT/ULX() at the moment, let's just drop them.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

hsw_get_cdclk_freq() is really just HSW, so we can use IS_HSW_ULT()
instead of IS_ULT() there.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The quality of being a ULT or ULX package doesn't tell anything across
generations and so a global IS_ULT() macro doesn't make much sense, esp.
as we're adding new products.

So, spell out which ULT/ULX SKUs we are talking about here, namely HSW
and BDW.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

HAS_IPS() has a '|| IS_BROADWELL()', no need to check for IS_BDW_ULT().
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

No need to add the BDW pci ULT/ULX checks inside a if (IS_HASWELL(dev))
code path.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Fix spelling fail.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

This simplifies the code in the vlv irq handler. Also this now
means that we correctly filter underruns on gen2-4.

And as the real upshot I need to document one less function for
the fifo underrun code.

v2: Shorten one long line.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Way too much copypasta all over. And this also clarifies a bit what's
going on since it separates the "do we have an underrun irq" from the
"should we report the underrun" check.

v2: Fix excessively long lines.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

It's the new rule!
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Prep work for some nice documentation. Requires that we export the
display irq enable/disable functions on ilk/ibx. But we already export
them for vlv/i915. So not more inconsistency.

v2: Rebase on top of skl stage 1.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

This reverts commit 8c50f10d.

It's not yet solid and Dave objected to pulling the tree in its
current state.

Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
References: http://mid.mail-archive.com/CAPM=9ty2r1MLE=wzC-_vNSUzXVqAyXiGgocpSV9qOp0gzpK3xA@mail.gmail.com
References: http://lists.freedesktop.org/archives/intel-gfx/2014-October/053926.htmlAcked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Fix short vs. long hpd detection for non-g4x and non-pch split
platforms.

Broken since introduction in
commit 13cf5504
Author: Dave Airlie <airlied@redhat.com>
Date:   Wed Jun 18 11:29:35 2014 +1000

    drm/i915: rework digital port IRQ handling (v2)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83175Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

On CHV the display DDC pins may be muxed to an alternate function if
there's no need for DDC on a specific port, which is the case for eDP
ports since there's no way to plug in a DP++ HDMI dongle.

This causes problems when trying to determine if the port is present
since the the DP_DETECTED bit is the latched state of the DDC SDA pin
at boot. If the DDC pins are muxed to an alternate function the bit
may indicate that the port isn't present.

To work around this look at the VBT as well as the DP_DETECTED bit
to determine if we should attempt registering an eDP port. Do this
only for ports B and C since port D doesn't support eDP (no PPS/BLC).

In theory someone could also wire up a normal DP port w/o DDC lines.
That would just mean that simple DP++ HDMI dongles wouldn't work
on such a port. With this change we would still fail to register
such DP ports. But let's hope no one wires their board in such a way,
and if they do we can extend the VBT checks to cover normal DP ports
as well.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84265Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We were missing the pipe B/C vblank bits! Take a look at
gen8_de_irq_postinstall for a comparison.

This should fix a bunch of IGT tests.

There are a few more things we could improve on this code, but this
should be the minimal fix to unblock us.

v2: s/extra_iir/extra_ier/ because IIR doesn't make sense (Ville)

Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=83640
Testcase: igt/*
Cc: stable@vger.kernel.org
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Move the duplicated DIV_ROUND_CLOSEST_ULL macro into the intel_drv.h
header file so that it can be shared between intel_display.c
and intel_panel.c.
Signed-off-by: NU. Artie Eoff <ullysses.a.eoff@intel.com>
Reviewed-By: NJoe Konno <joe.konno@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Improper truncated integer division in the scale() function causes
actual_brightness != brightness. This (partial) work-around should be
sufficient for a majority of use-cases, but it is by no means a complete
solution.

TODO: Determine how best to scale "user" values to "hw" values, and
vice-versa, when the ranges are of different sizes. That would be a
buggy scenario even with this work-around.

The issue was introduced in the following (v3.17-rc1) commit:

    6dda730e drm/i915: respect the VBT minimum backlight brightness

Note that for easier backporting this commit adds a duplicated macro.
A follow-up cleanup patch rectifies this for 3.18+

v2: (thanks to Chris Wilson) clarify commit message, use rounded division
macro

v3: -DIV_ROUND_CLOSEST() fails to build with CONFIG_X86_32=y. (Jani)
    -Use DIV_ROUND_CLOSEST_ULL() instead. (Damien)
    -v1 and v2 originally authored by Joe Konno.
Signed-off-by: NU. Artie Eoff <ullysses.a.eoff@intel.com>
Cc: stable@vger.kernel.org
Reviewed-By: NJoe Konno <joe.konno@intel.com>
[danvet: Add backporting note.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We can use the same logic to walk the different bound/unbound lists
during shrinker (as the unbound list is a degenerate case of the bound
list), slightly compacting the code.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just start with the basics for now.

Since there's a lot of different functionality in i915_irq.c I've
decided to split it into different sections and pull in just the
relevant functions. Splitting into different files looks like a lot
more work since the interrupt handlers do an awful lot of reuse all
over.

v2: Rebase onto changed function names.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's the new world order!

Not going full monty on these here and rolling this out throughout the
subsequent call chains since this is just for the kerneldoc. Later on
we can go more crazy, especially once we've embedded drm_device
correctly.

v2: Also frob the runtime_pm functions ...
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Double negations just parse harder. Also this allows us to ditch some
init code since clearing to 0 dtrt. Also ditch the assignment in
intel_pm_setup, that's not redundant since we do the assignement now
while setting up interrupts.

While at it do engage in a bit of OCD and wrap up the few lines of
setup/teardown code into little helper functions: intel_irq_fini for
cleanup and intel_irq_init_hw for hw setup.

v2: Use _install/_uninstall for the new wrapper function names as
Paulo suggested.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Clear the override bits to make sure the hardware manages
the TX FIFO reset master on its own.

v2: Squash with the earlier attempt at forcing the override bits
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The register can house two different swing marging/deemph settings at
once. However only one gets used based on some other bits. Make sure we
set those bits correctly to make the hardware use the settings we
provided.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Even though it's unliky, we should check each aux transaction not just
the first one. Also

commit ce31d9f4
Author: Rodrigo Vivi <rodrigo.vivi@intel.com>
Date:   Mon Sep 29 18:29:52 2014 -0400

    drm/i915: preserve other DP_TEST_SINK bits.

added a new aux transaction before the one which was checked. Fix
this.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Todd Previte <tprevite@gmail.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Inspired by Ville constifying the send buffer for pach_aux.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Use pack_aux() to construct the PSR exit DPMS D0 AUX message,
and use the defines from dp_dp_helper.h to populate the message
contents.

v2: Use sizeof() for message size (Jani)
    Use a generic loop to write EDP_PSR_AUX_DATA registers

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This seems to have been accidentally lost in

commit be62acb4
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date:   Fri Aug 30 16:19:28 2013 +0300

    drm/i915: ban badly behaving contexts

Without this real gpu hangs only log output at info level, which gets
filtered away by piglit's testrunner.

v2: Tune down to notice level. Note that we need to add drm/i915 so
that at least the automatic igt dmesg filtering still picks it up.

v3: git add and lack of coffee don't mix well.

v4: Message is in between hw and sw reset, so switch verb to
continuous form.

v5: Use i915_stop_rings_allow_warn for consistency. For Chris' case of
injecting lots of hangs I guess we need to revamp this all anyway when
merging. For now this should plug the regression for piglit testing
mesa.

v6: Make it compile (Mika).

Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reported-by: NKenneth Graunke <kenneth@whitecape.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

I've decided not to document the functions exported to the audio
driver since really, they shouldn't exist ...

v2: Improvements from Imre's review plus a few more spelling fixes
I've spotted.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Allows us to mark it static and so forgoe the kerneldoc for it.

Note that intel_power_domains_fini is also called from failure paths
in the driver load sequence. But the call to runtime_pm_disable for
that is harmless since by default runtime pm is already disabled.

v2: Augment the commit message as discussed with Imre on irc.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I've decided to not move intel_display_port_power_domain because
that's just a hack in our design ...
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

- fini goes with init, so call it intel_power_domains_fini. While
  at it shovel some of the fini code that leaked out of it back in.

- give power_enabled functions the verb _is_ to make the meaning clearer.
  Also use a __ prefix instead of _unlocked to really discourage users.

- rename runtime_pm_init/fini to enable/disable since that's what they do.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Geez is the audio hack ugly.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
[danvet: Rebased on top of the skl patches.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Another layer of indirection for just an lpt-only w/a is a bit
excessive. Reduce it.

This was added in

commit 7d708ee4
Author: Imre Deak <imre.deak@intel.com>
Date:   Wed Apr 17 14:04:50 2013 +0300

    drm/i915: HSW: allow PCH clock gating for suspend

Cc: Imre Deak <imre.deak@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Oh well.

v2: Fix one more spelling fail Paulo spotted.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

So I think I've spotted a small gap in the frontbuffer tracking
while discussing the logic with Paulo on irc:

1. Userspace schedules gpu rendering to the current frontbuffer.
This gets tracked in dev_priv->fb_tracking.busy_bits.

2. We pageflip a fully rendered buffer before the frontbuffer
rendering completes.

3. The request retiring will never clear busy_bits (since at retire
time the old frontbuffer won't have obj->frontbuffer_bits set), so
these bits now are stuck until someone again does a bit of frontbuffer
tracking.

If we clear stale busy_bits in flip_prepare this gap is closed.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Haswell and later silicon has added a new pixel replication register
to the pipe timings for each transcoder. Now in addition to the
DPLL_A_MD register for the pixel clock double, we also need to write
to the TRANS_MULT_n (0x6002c) register to double the pixel data. Writing
to the DPLL only double the pixel clock.

ver2: Macro name change from MULTIPLY to PIPE_MULTI. (Daniel)
ver3: Do not set pixel multiplier if transcoder is eDP (Ville)
ver4: Macro name change to PIPE_MULT and default else pixel_multiplier

Cc: Ville =?iso-8859-1?Q?Syrj=E4l=E4?= <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NClint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Appease checkpatch and move one hunk back into the right
place that git am misplace!?]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Sink crc was implemented based on dp 1.1 spec that had all TEST_SINK bits
reserved reading all 0s. But when reviewing my latest changes on sink crc
Todd warned me that on new specs we have other valid bits on this reg that we
might want to preserve.

Cc: Todd Previte <tprevite@gmail.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NTodd Previte <tprevite@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This WA affect BDW GT3 pre-production steppings.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
[danvet: Don't mention steppings ...]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>