We introduce a new helper that creates and inserts a new redistributor
region into the rdist region list. This helper both handles the case
where the redistributor region size is known at registration time
and the legacy case where it is not (eventually depending on the number
of online vcpus). Depending on pfns, we perform all the possible checks
that we can do:

- end of memory crossing
- incorrect alignment of the base address
- collision with distributor region if already defined
- collision with already registered rdist regions
- check of the new index

Rdist regions must be inserted by increasing order of indices. Indices
must be contiguous.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

vgic_v3_check_base() currently only handles the case of a unique
legacy redistributor region whose size is not explicitly set but
inferred, instead, from the number of online vcpus.

We adapt it to handle the case of multiple redistributor regions
with explicitly defined size. We rely on two new helpers:
- vgic_v3_rdist_overlap() is used to detect overlap with the dist
  region if defined
- vgic_v3_rd_region_size computes the size of the redist region,
  would it be a legacy unique region or a new explicitly sized
  region.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The TYPER of an redistributor reflects whether the rdist is
the last one of the redistributor region. Let's compare the TYPER
GPA against the address of the last occupied slot within the
redistributor region.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We introduce vgic_v3_rdist_free_slot to help identifying
where we can place a new 2x64KB redistributor.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

At the moment KVM supports a single rdist region. We want to
support several separate rdist regions so let's introduce a list
of them. This patch currently only cares about a single
entry in this list as the functionality to register several redist
regions is not yet there. So this only translates the existing code
into something functionally similar using that new data struct.

The redistributor region handle is stored in the vgic_cpu structure
to allow later computation of the TYPER last bit.
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

in case kvm_vgic_map_resources() fails, typically if the vgic
distributor is not defined, __kvm_vgic_destroy will be called
several times. Indeed kvm_vgic_map_resources() is called on
first vcpu run. As a result dist->spis is freeed more than once
and on the second time it causes a "kernel BUG at mm/slub.c:3912!"

Set dist->spis to NULL to avoid the crash.

Fixes: ad275b8b ("KVM: arm/arm64: vgic-new: vgic_init: implement
vgic_init")
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Now that the host SVE context can be saved on demand from Hyp,
there is no longer any need to save this state in advance before
entering the guest.

This patch removes the relevant call to
kvm_fpsimd_flush_cpu_state().

Since the problem that function was intended to solve now no longer
exists, the function and its dependencies are also deleted.
Signed-off-by: NDave Martin <Dave.Martin@arm.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

This patch adds SVE context saving to the hyp FPSIMD context switch
path.  This means that it is no longer necessary to save the host
SVE state in advance of entering the guest, when in use.

In order to avoid adding pointless complexity to the code, VHE is
assumed if SVE is in use.  VHE is an architectural prerequisite for
SVE, so there is no good reason to turn CONFIG_ARM64_VHE off in
kernels that support both SVE and KVM.

Historically, software models exist that can expose the
architecturally invalid configuration of SVE without VHE, so if
this situation is detected at kvm_init() time then KVM will be
disabled.
Signed-off-by: NDave Martin <Dave.Martin@arm.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

This patch refactors KVM to align the host and guest FPSIMD
save/restore logic with each other for arm64.  This reduces the
number of redundant save/restore operations that must occur, and
reduces the common-case IRQ blackout time during guest exit storms
by saving the host state lazily and optimising away the need to
restore the host state before returning to the run loop.

Four hooks are defined in order to enable this:

 * kvm_arch_vcpu_run_map_fp():
   Called on PID change to map necessary bits of current to Hyp.

 * kvm_arch_vcpu_load_fp():
   Set up FP/SIMD for entering the KVM run loop (parse as
   "vcpu_load fp").

 * kvm_arch_vcpu_ctxsync_fp():
   Get FP/SIMD into a safe state for re-enabling interrupts after a
   guest exit back to the run loop.

   For arm64 specifically, this involves updating the host kernel's
   FPSIMD context tracking metadata so that kernel-mode NEON use
   will cause the vcpu's FPSIMD state to be saved back correctly
   into the vcpu struct.  This must be done before re-enabling
   interrupts because kernel-mode NEON may be used by softirqs.

 * kvm_arch_vcpu_put_fp():
   Save guest FP/SIMD state back to memory and dissociate from the
   CPU ("vcpu_put fp").

Also, the arm64 FPSIMD context switch code is updated to enable it
to save back FPSIMD state for a vcpu, not just current.  A few
helpers drive this:

 * fpsimd_bind_state_to_cpu(struct user_fpsimd_state *fp):
   mark this CPU as having context fp (which may belong to a vcpu)
   currently loaded in its registers.  This is the non-task
   equivalent of the static function fpsimd_bind_to_cpu() in
   fpsimd.c.

 * task_fpsimd_save():
   exported to allow KVM to save the guest's FPSIMD state back to
   memory on exit from the run loop.

 * fpsimd_flush_state():
   invalidate any context's FPSIMD state that is currently loaded.
   Used to disassociate the vcpu from the CPU regs on run loop exit.

These changes allow the run loop to enable interrupts (and thus
softirqs that may use kernel-mode NEON) without having to save the
guest's FPSIMD state eagerly.

Some new vcpu_arch fields are added to make all this work.  Because
host FPSIMD state can now be saved back directly into current's
thread_struct as appropriate, host_cpu_context is no longer used
for preserving the FPSIMD state.  However, it is still needed for
preserving other things such as the host's system registers.  To
avoid ABI churn, the redundant storage space in host_cpu_context is
not removed for now.

arch/arm is not addressed by this patch and continues to use its
current save/restore logic.  It could provide implementations of
the helpers later if desired.
Signed-off-by: NDave Martin <Dave.Martin@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

KVM/ARM differs from other architectures in having to maintain an
additional virtual address space from that of the host and the
guest, because we split the execution of KVM across both EL1 and
EL2.

This results in a need to explicitly map data structures into EL2
(hyp) which are accessed from the hyp code.  As we are about to be
more clever with our FPSIMD handling on arm64, which stores data in
the task struct and uses thread_info flags, we will have to map
parts of the currently executing task struct into the EL2 virtual
address space.

However, we don't want to do this on every KVM_RUN, because it is a
fairly expensive operation to walk the page tables, and the common
execution mode is to map a single thread to a VCPU.  By introducing
a hook that architectures can select with
HAVE_KVM_VCPU_RUN_PID_CHANGE, we do not introduce overhead for
other architectures, but have a simple way to only map the data we
need when required for arm64.

This patch introduces the framework only, and wires it up in the
arm/arm64 KVM common code.

No functional change.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NDave Martin <Dave.Martin@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

One comment still mentioned process_maintenance operations after
commit af061499 ("KVM: arm/arm64: vgic: Get rid of unnecessary
process_maintenance operation")

Update the comment to point to vgic_fold_lr_state instead, which
is where maintenance interrupts are taken care of.
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NValentin Schneider <valentin.schneider@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Now that we make sure we don't inject multiple instances of the
same GICv2 SGI at the same time, we've made another bug more
obvious:

If we exit with an active SGI, we completely lose track of which
vcpu it came from. On the next entry, we restore it with 0 as a
source, and if that wasn't the right one, too bad. While this
doesn't seem to trouble GIC-400, the architectural model gets
offended and doesn't deactivate the interrupt on EOI.

Another connected issue is that we will happilly make pending
an interrupt from another vcpu, overriding the above zero with
something that is just as inconsistent. Don't do that.

The final issue is that we signal a maintenance interrupt when
no pending interrupts are present in the LR. Assuming we've fixed
the two issues above, we end-up in a situation where we keep
exiting as soon as we've reached the active state, and not be
able to inject the following pending.

The fix comes in 3 parts:
- GICv2 SGIs have their source vcpu saved if they are active on
  exit, and restored on entry
- Multi-SGIs cannot go via the Pending+Active state, as this would
  corrupt the source field
- Multi-SGIs are converted to using MI on EOI instead of NPIE

Fixes: 16ca6a60 ("KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid")
Reported-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

It's possible for userspace to control n. Sanitize n when using it as an
array index.

Note that while it appears that n must be bound to the interval [0,3]
due to the way it is extracted from addr, we cannot guarantee that
compiler transformations (and/or future refactoring) will ensure this is
the case, and given this is a slow path it's better to always perform
the masking.

Found by smatch.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: NWill Deacon <will.deacon@arm.com>

It's possible for userspace to control intid. Sanitize intid when using
it as an array index.

At the same time, sort the includes when adding <linux/nospec.h>.

Found by smatch.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NChristoffer Dall <christoffer.dall@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Although we've implemented PSCI 0.1, 0.2 and 1.0, we expose either 0.1
or 1.0 to a guest, defaulting to the latest version of the PSCI
implementation that is compatible with the requested version. This is
no different from doing a firmware upgrade on KVM.

But in order to give a chance to hypothetical badly implemented guests
that would have a fit by discovering something other than PSCI 0.2,
let's provide a new API that allows userspace to pick one particular
version of the API.

This is implemented as a new class of "firmware" registers, where
we expose the PSCI version. This allows the PSCI version to be
save/restored as part of a guest migration, and also set to
any supported version if the guest requires it.

Cc: stable@vger.kernel.org #4.16
Reviewed-by: NChristoffer Dall <cdall@kernel.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

When vgic_prune_ap_list() finds an interrupt that needs to be migrated
to a new VCPU, we should notify this VCPU of the pending interrupt,
since it requires immediate action.
Kick this VCPU once we have added the new IRQ to the list, but only
after dropping the locks.
Reported-by: NStefano Stabellini <sstabellini@kernel.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@arm.com>
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Before entering the guest, we check whether our VMID is still
part of the current generation. In order to avoid taking a lock,
we start with checking that the generation is still current, and
only if not current do we take the lock, recheck, and update the
generation and VMID.

This leaves open a small race: A vcpu can bump up the global
generation number as well as the VM's, but has not updated
the VMID itself yet.

At that point another vcpu from the same VM comes in, checks
the generation (and finds it not needing anything), and jumps
into the guest. At this point, we end-up with two vcpus belonging
to the same VM running with two different VMIDs. Eventually, the
VMID used by the second vcpu will get reassigned, and things will
really go wrong...

A simple solution would be to drop this initial check, and always take
the lock. This is likely to cause performance issues. A middle ground
is to convert the spinlock to a rwlock, and only take the read lock
on the fast path. If the check fails at that point, drop it and
acquire the write lock, rechecking the condition.

This ensures that the above scenario doesn't occur.

Cc: stable@vger.kernel.org
Reported-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

vgic_copy_lpi_list() parses the LPI list and picks LPIs targeting
a given vcpu. We allocate the array containing the intids before taking
the lpi_list_lock, which means we can have an array size that is not
equal to the number of LPIs.

This is particularly obvious when looking at the path coming from
vgic_enable_lpis, which is not a command, and thus can run in parallel
with commands:

vcpu 0:                                        vcpu 1:
vgic_enable_lpis
  its_sync_lpi_pending_table
    vgic_copy_lpi_list
      intids = kmalloc_array(irq_count)
                                               MAPI(lpi targeting vcpu 0)
      list_for_each_entry(lpi_list_head)
        intids[i++] = irq->intid;

At that stage, we will happily overrun the intids array. Boo. An easy
fix is is to break once the array is full. The MAPI command will update
the config anyway, and we won't miss a thing. We also make sure that
lpi_list_count is read exactly once, so that further updates of that
value will not affect the array bound check.

Cc: stable@vger.kernel.org
Fixes: ccb1d791 ("KVM: arm64: vgic-its: Fix pending table sync")
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

It was recently reported that VFIO mediated devices, and anything
that VFIO exposes as level interrupts, do no strictly follow the
expected logic of such interrupts as it only lowers the input
line when the guest has EOId the interrupt at the GIC level, rather
than when it Acked the interrupt at the device level.

THe GIC's Active+Pending state is fundamentally incompatible with
this behaviour, as it prevents KVM from observing the EOI, and in
turn results in VFIO never dropping the line. This results in an
interrupt storm in the guest, which it really never expected.

As we cannot really change VFIO to follow the strict rules of level
signalling, let's forbid the A+P state altogether, as it is in the
end only an optimization. It ensures that we will transition via
an invalid state, which we can use to notify VFIO of the EOI.
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Tested-by: NEric Auger <eric.auger@redhat.com>
Tested-by: NShunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Until now, all EL2 executable mappings were derived from their
EL1 VA. Since we want to decouple the vectors mapping from
the rest of the hypervisor, we need to be able to map some
text somewhere else.

The "idmap" region (for lack of a better name) is ideally suited
for this, as we have a huge range that hardly has anything in it.

Let's extend the IO allocator to also deal with executable mappings,
thus providing the required feature.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The main idea behind randomising the EL2 VA is that we usually have
a few spare bits between the most significant bit of the VA mask
and the most significant bit of the linear mapping.

Those bits could be a bunch of zeroes, and could be useful
to move things around a bit. Of course, the more memory you have,
the less randomisation you get...

Alternatively, these bits could be the result of KASLR, in which
case they are already random. But it would be nice to have a
*different* randomization, just to make the job of a potential
attacker a bit more difficult.

Inserting these random bits is a bit involved. We don't have a spare
register (short of rewriting all the kern_hyp_va call sites), and
the immediate we want to insert is too random to be used with the
ORR instruction. The best option I could come up with is the following
sequence:

	and x0, x0, #va_mask
	ror x0, x0, #first_random_bit
	add x0, x0, #(random & 0xfff)
	add x0, x0, #(random >> 12), lsl #12
	ror x0, x0, #(63 - first_random_bit)

making it a fairly long sequence, but one that a decent CPU should
be able to execute without breaking a sweat. It is of course NOPed
out on VHE. The last 4 instructions can also be turned into NOPs
if it appears that there is no free bits to use.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We so far mapped our HYP IO (which is essentially the GICv2 control
registers) using the same method as for memory. It recently appeared
that is a bit unsafe:

We compute the HYP VA using the kern_hyp_va helper, but that helper
is only designed to deal with kernel VAs coming from the linear map,
and not from the vmalloc region... This could in turn cause some bad
aliasing between the two, amplified by the upcoming VA randomisation.

A solution is to come up with our very own basic VA allocator for
MMIO. Since half of the HYP address space only contains a single
page (the idmap), we have plenty to borrow from. Let's use the idmap
as a base, and allocate downwards from it. GICv2 now lives on the
other side of the great VA barrier.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Unmapping the idmap range using 52bit PA is quite broken, as we
don't take into account the right number of PGD entries, and rely
on PTRS_PER_PGD. The result is that pgd_index() truncates the
address, and we end-up in the weed.

Let's introduce a new unmap_hyp_idmap_range() that knows about this,
together with a kvm_pgd_index() helper, which hides a bit of the
complexity of the issue.

Fixes: 98732d1b ("KVM: arm/arm64: fix HYP ID map extension to 52 bits")
Reported-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Although the idmap section of KVM can only be at most 4kB and
must be aligned on a 4kB boundary, the rest of the code expects
it to be page aligned. Things get messy when tearing down the
HYP page tables when PAGE_SIZE is 64K, and the idmap section isn't
64K aligned.

Let's fix this by computing aligned boundaries that the HYP code
will use.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reported-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

As we're about to change the way we map devices at HYP, we need
to move away from kern_hyp_va on an IO address.

One way of achieving this is to store the VAs in kvm_vgic_global_state,
and use that directly from the HYP code. This requires a small change
to create_hyp_io_mappings so that it can also return a HYP VA.

We take this opportunity to nuke the vctrl_base field in the emulated
distributor, as it is not used anymore.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Both HYP io mappings call ioremap, followed by create_hyp_io_mappings.
Let's move the ioremap call into create_hyp_io_mappings itself, which
simplifies the code a bit and allows for further refactoring.
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Displaying the HYP VA information is slightly counterproductive when
using VA randomization. Turn it into a debug feature only, and adjust
the last displayed value to reflect the top of RAM instead of ~0.
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We can finally get completely rid of any calls to the VGICv3
save/restore functions when the AP lists are empty on VHE systems.  This
requires carefully factoring out trap configuration from saving and
restoring state, and carefully choosing what to do on the VHE and
non-VHE path.

One of the challenges is that we cannot save/restore the VMCR lazily
because we can only write the VMCR when ICC_SRE_EL1.SRE is cleared when
emulating a GICv2-on-GICv3, since otherwise all Group-0 interrupts end
up being delivered as FIQ.

To solve this problem, and still provide fast performance in the fast
path of exiting a VM when no interrupts are pending (which also
optimized the latency for actually delivering virtual interrupts coming
from physical interrupts), we orchestrate a dance of only doing the
activate/deactivate traps in vgic load/put for VHE systems (which can
have ICC_SRE_EL1.SRE cleared when running in the host), and doing the
configuration on every round-trip on non-VHE systems.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The APRs can only have bits set when the guest acknowledges an interrupt
in the LR and can only have a bit cleared when the guest EOIs an
interrupt in the LR.  Therefore, if we have no LRs with any
pending/active interrupts, the APR cannot change value and there is no
need to clear it on every exit from the VM (hint: it will have already
been cleared when we exited the guest the last time with the LRs all
EOIed).

The only case we need to take care of is when we migrate the VCPU away
from a CPU or migrate a new VCPU onto a CPU, or when we return to
userspace to capture the state of the VCPU for migration.  To make sure
this works, factor out the APR save/restore functionality into separate
functions called from the VCPU (and by extension VGIC) put/load hooks.
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Just like we can program the GICv2 hypervisor control interface directly
from the core vgic code, we can do the same for the GICv3 hypervisor
control interface on VHE systems.

We do this by simply calling the save/restore functions when we have VHE
and we can then get rid of the save/restore function calls from the VHE
world switch function.

One caveat is that we now write GICv3 system register state before the
potential early exit path in the run loop, and because we sync back
state in the early exit path, we have to ensure that we read a
consistent GIC state from the sync path, even though we have never
actually run the guest with the newly written GIC state.  We solve this
by inserting an ISB in the early exit path.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The vgic-v2-sr.c file now only contains the logic to replay unaligned
accesses to the virtual CPU interface on 16K and 64K page systems, which
is only relevant on 64-bit platforms.  Therefore move this file to the
arm64 KVM tree, remove the compile directive from the 32-bit side
makefile, and remove the ifdef in the C file.

Since this file also no longer saves/restores anything, rename the file
to vgic-v2-cpuif-proxy.c to more accurately describe the logic in this
file.
Reviewed-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We can program the GICv2 hypervisor control interface logic directly
from the core vgic code and can instead do the save/restore directly
from the flush/sync functions, which can lead to a number of future
optimizations.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

There is really no need to store the vgic_elrsr on the VGIC data
structures as the only need we have for the elrsr is to figure out if an
LR is inactive when we save the VGIC state upon returning from the
guest.  We can might as well store this in a temporary local variable.
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

SPSR_EL1 is not used by a VHE host kernel and can be deferred, but we
need to rework the accesses to this register to access the latest value
depending on whether or not guest system registers are loaded on the CPU
or only reside in memory.

The handling of accessing the various banked SPSRs for 32-bit VMs is a
bit clunky, but this will be improved in following patches which will
first prepare and subsequently implement deferred save/restore of the
32-bit registers, including the 32-bit SPSRs.
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Currently we access the system registers array via the vcpu_sys_reg()
macro.  However, we are about to change the behavior to some times
modify the register file directly, so let's change this to two
primitives:

 * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg()
 * Direct array access macro __vcpu_sys_reg()

The accessor macros should be used in places where the code needs to
access the currently loaded VCPU's state as observed by the guest.  For
example, when trapping on cache related registers, a write to a system
register should go directly to the VCPU version of the register.

The direct array access macro can be used in places where the VCPU is
known to never be running (for example userspace access) or for
registers which are never context switched (for example all the PMU
system registers).

This rewrites all users of vcpu_sys_regs to one of the macros described
above.

No functional change.
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NChristoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The VHE switch function calls __timer_enable_traps and
__timer_disable_traps which don't do anything on VHE systems.
Therefore, simply remove these calls from the VHE switch function and
make the functions non-conditional as they are now only called from the
non-VHE switch path.
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

So far this is mostly (see below) a copy of the legacy non-VHE switch
function, but we will start reworking these functions in separate
directions to work on VHE and non-VHE in the most optimal way in later
patches.

The only difference after this patch between the VHE and non-VHE run
functions is that we omit the branch-predictor variant-2 hardening for
QC Falkor CPUs, because this workaround is specific to a series of
non-VHE ARMv8.0 CPUs.
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

As we are about to move a bunch of save/restore logic for VHE kernels to
the load and put functions, we need some infrastructure to do this.
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

We currently have a separate read-modify-write of the HCR_EL2 on entry
to the guest for the sole purpose of setting the VF and VI bits, if set.
Since this is most rarely the case (only when using userspace IRQ chip
and interrupts are in flight), let's get rid of this operation and
instead modify the bits in the vcpu->arch.hcr[_el2] directly when
needed.
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NJulien Thierry <julien.thierry@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Moving the call to vcpu_load() in kvm_arch_vcpu_ioctl_run() to after
we've called kvm_vcpu_first_run_init() simplifies some of the vgic and
there is also no need to do vcpu_load() for things such as handling the
immediate_exit flag.
Reviewed-by: NJulien Grall <julien.grall@arm.com>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>