The order-based approach is not only less efficient (requiring a shift
and a compare, typical generated code looking like this

	mov	eax, [machine_to_phys_order]
	mov	ecx, eax
	shr	ebx, cl
	test	ebx, ebx
	jnz	...

whereas a direct check requires just a compare, like in

	cmp	ebx, [machine_to_phys_nr]
	jae	...

), but also slightly dangerous in the 32-on-64 case - the element
address calculation can wrap if the next power of two boundary is
sufficiently far away from the actual upper limit of the table, and
hence can result in user space addresses being accessed (with it being
unknown what may actually be mapped there).

Additionally, the elimination of the mistaken use of fls() here (should
have been __fls()) fixes a latent issue on x86-64 that would trigger
if the code was run on a system with memory extending beyond the 44-bit
boundary.

CC: stable@kernel.org
Signed-off-by: NJan Beulich <jbeulich@novell.com>
[v1: Based on Jeremy's feedback]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Fix build errors (found when CONFIG_SYSFS is not enabled):

drivers/xen/xen-selfballoon.c:446: warning: data definition has no type or storage class
drivers/xen/xen-selfballoon.c:446: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
drivers/xen/xen-selfballoon.c:446: warning: parameter names (without types) in function declaration
drivers/xen/xen-selfballoon.c:485: error: expected declaration specifiers or '...' before string constant
drivers/xen/xen-selfballoon.c:485: warning: data definition has no type or storage class
drivers/xen/xen-selfballoon.c:485: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'
drivers/xen/xen-selfballoon.c:485: warning: function declaration isn't a prototype
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

with CONFIG_XEN and CONFIG_FTRACE set we get this:

arch/x86/xen/trace.c:22: error: ‘__HYPERVISOR_console_io’ undeclared here (not in a function)
arch/x86/xen/trace.c:22: error: array index in initializer not of integer type
arch/x86/xen/trace.c:22: error: (near initialization for ‘xen_hypercall_names’)
arch/x86/xen/trace.c:23: error: ‘__HYPERVISOR_physdev_op_compat’ undeclared here (not in a function)

Issue was that the definitions of __HYPERVISOR were not pulled
if CONFIG_XEN_PRIVILEGED_GUEST was not set.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

WARN message should not complain
 "Failed to release memory %lx-%lx err=%d\n"
                           ^^^^^^^
about range when it fails to release just one page,
instead it should say what pfn is not freed.

In addition line:
 printk(KERN_INFO "xen_release_chunk: looking at area pfn %lx-%lx: "
 ...
 printk(KERN_CONT "%lu pages freed\n", len);
will be broken if WARN in between this line is fired. So fix it
by using a single printk for this.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Use correct format specifier for unsigned long.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Apparently we wanted CONFIG_FTRACE rather the CONFIG_FUNCTION_TRACER.
Reported-by: NSander Eikelenboom <linux@eikelenboom.it>
Tested-by: NSander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Without enabling CONFIG_XEN_TMEM we get this:

drivers/xen/xen-selfballoon.c:461: undefined reference to `tmem_enabled'
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

With a specific enough .config file compile errors show
for missing workqueue declarations.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

drivers/xen/grant-table.c:85: warning: ‘rc’ may be used uninitialized in this function
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Remove duplicated #include('s) in
  drivers/xen/xen-pciback/xenbus.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

* 'upstream/xen-tracing2' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen/tracing: fix compile errors when tracing is disabled.

* 'at91/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc:
  at91: add arch specific ioremap support
  at91: factorize sram init
  at91: move register clocks to soc generic init
  at91: move clock subsystem init to soc generic init
  at91: use structure to store the current soc
  at91: remove AT91_DBGU offset from dbgu register macro
  at91: factorize at91 interrupts init to soc
  at91: introduce commom AT91_BASE_SYS

* 'next/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (21 commits)
  arm/dt: tegra devicetree support
  arm/versatile: Add device tree support
  dt/irq: add irq_domain_generate_simple() helper
  irq: add irq_domain translation infrastructure
  dmaengine: imx-sdma: add device tree probe support
  dmaengine: imx-sdma: sdma_get_firmware does not need to copy fw_name
  dmaengine: imx-sdma: use platform_device_id to identify sdma version
  mmc: sdhci-esdhc-imx: add device tree probe support
  mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host
  mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()
  mmc: sdhci-esdhc-imx: do not reference platform data after probe
  mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  net/fec: add device tree probe support
  net: ibm_newemac: convert it to use of_get_phy_mode
  dt/net: add helper function of_get_phy_mode
  net/fec: gasket needs to be enabled for some i.mx
  serial/imx: add device tree probe support
  serial/imx: get rid of the uses of cpu_is_mx1()
  arm/dt: Add dtb make rule
  arm/dt: Add skeleton dtsi file
  ...

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc:
  ARM: zynq: remove incorrectly deleted file
  ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdog: (25 commits)
  watchdog: WatchDog Timer Driver Core - Add minimum and max timeout
  watchdog: WatchDog Timer Driver Core - Add ioctl call
  watchdog: WatchDog Timer Driver Core - Add nowayout feature
  watchdog: WatchDog Timer Driver Core - Add Magic Close feature
  watchdog: WatchDog Timer Driver Core - Add WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl
  watchdog: WatchDog Timer Driver Core - Add WDIOC_SETOPTIONS ioctl
  watchdog: WatchDog Timer Driver Core - Add WDIOC_KEEPALIVE ioctl
  watchdog: WatchDog Timer Driver Core - Add basic ioctl functionality
  watchdog: WatchDog Timer Driver Core - Add basic framework
  watchdog: hpwdt: add next gen HP servers
  watchdog: it8712f_wdt.c: improve includes
  watchdog: at91sam9/wdt: move register header to drivers
  watchdog: Add Xilinx watchdog timer driver
  watchdog: remove empty pm-functions
  watchdog: sp805: Flush posted writes in enable/disable.
  watchdog: sp805: Don't write 0 to the load value register.
  watchdog: imx2_wdt: add device tree probe support
  watchdog: s3c2410: Add support for device tree based probe
  watchdog: mpcore_wdt: Add suspend/resume support.
  watchdog: mtx1-wdt: use dev_{err,info} instead of printk()
  ...

When commit 4e34e719 ("fs: take the ACL checks to common code")
changed the xyz_check_acl() functions into the more natural
xyz_get_acl() interface, we grew two copies of the

  #define ext2_get_acl	NULL

define for the non-acl case.

Remove the extra one.
Reported-by: NMarco Stornelli <marco.stornelli@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

My previous commit left the file empty and present in the
Makefile, which is a bit dirty and caused problems with
'make distclean', as pointed out by David Howells.
This hopefully cleans it up the right way.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NJohn Linn <john.linn@xilinx.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

instead of reading the registers everytime

the current implementation respect the following constrain:
 - allow 1 to n soc to be enabled
 - allow to have a virtual cpu type and subtype
 - always detect the cpu type and subtype and report it
 - detect if the soc support is enabled
 - prepare for sysfs export support
 - drop soc specific code via compiler when the soc not enabled
   (via cpu_is_xxx)

Today if we read the exid we will have the same value for 9g35 and 9m11
and we will need to check the cidr too

with the new implementation we just need to check the soc subtype

this will also allow to have specific virtual subtype for rm9200 which the
board will have to specify via at91rm9200_set_type(int) as we have no way to
detect it.

this implementation is inspired by the SH cpu detection support
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

to make the soc base specified at runtime instead of compiled time
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

they are the same except the default priority
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

On all at91 except rm9200 and x40 have the System Controller starts
at address 0xffffc000 and has a size of 16KiB.

On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting
at 0xfffff000

This patch removes the individual definitions of AT91_BASE_SYS and
replaces them with a common version at base 0xfffffc000 and size 16KiB
and map the same memory space
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  n2_crypto: Attach on Niagara-T3.
  n2rng: Attach on Niagara-T3.
  sparc: Detect and handle UltraSPARC-T3 cpu types.
  sparc: Don't do expensive hypervisor PCR write unless necessary.
  sparc: Add T3 sun4v cpu type and hypervisor group defines.
  sparc: Don't leave sparc_pmu_type NULL on sun4v.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits)
  tg3: Remove 5719 jumbo frames and TSO blocks
  tg3: Break larger frags into 4k chunks for 5719
  tg3: Add tx BD budgeting code
  tg3: Consolidate code that calls tg3_tx_set_bd()
  tg3: Add partial fragment unmapping code
  tg3: Generalize tg3_skb_error_unmap()
  tg3: Remove short DMA check for 1st fragment
  tg3: Simplify tx bd assignments
  tg3: Reintroduce tg3_tx_ring_info
  ASIX: Use only 11 bits of header for data size
  ASIX: Simplify condition in rx_fixup()
  Fix cdc-phonet build
  bonding: reduce noise during init
  bonding: fix string comparison errors
  net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared
  net: add IFF_SKB_TX_SHARED flag to priv_flags
  net: sock_sendmsg_nosec() is static
  forcedeth: fix vlans
  gianfar: fix bug caused by 87c288c6
  gro: Only reset frag0 when skb can be pulled
  ...

* 'for-linus' of git://neil.brown.name/md: (75 commits)
  md/raid10: handle further errors during fix_read_error better.
  md/raid10: Handle read errors during recovery better.
  md/raid10: simplify read error handling during recovery.
  md/raid10: record bad blocks due to write errors during resync/recovery.
  md/raid10:  attempt to fix read errors during resync/check
  md/raid10:  Handle write errors by updating badblock log.
  md/raid10: clear bad-block record when write succeeds.
  md/raid10: avoid writing to known bad blocks on known bad drives.
  md/raid10 record bad blocks as needed during recovery.
  md/raid10: avoid reading known bad blocks during resync/recovery.
  md/raid10 - avoid reading from known bad blocks - part 3
  md/raid10: avoid reading from known bad blocks - part 2
  md/raid10: avoid reading from known bad blocks - part 1
  md/raid10: Split handle_read_error out from raid10d.
  md/raid10: simplify/reindent some loops.
  md/raid5: Clear bad blocks on successful write.
  md/raid5.  Don't write to known bad block on doubtful devices.
  md/raid5: write errors should be recorded as bad blocks if possible.
  md/raid5: use bad-block log to improve handling of uncorrectable read errors.
  md/raid5: avoid reading from known bad blocks.
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  sound: oss: rename local change_bits to avoid powerpc bitsops.h definition
  ALSA: hda - Fix duplicated DAC assignments for Realtek
  ALSA: asihpi - off by one in asihpi_hpi_ioctl()
  ALSA: hda - Fix Oops with Realtek quirks with NULL adc_nids
  ALSA: asihpi - bug fix pa use before init.
  ALSA: hda - Add support for vref-out based mute LED control on IDT codecs

A small modification was necessary since in the machine description
for 'n2cp' and 'ncp' nodes, there no longer is an 'intr' property.

That's OK because this property was always nothing more than an
array of integers '1' ... 'nr_inos + 1' so we can just compute it
in-place.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And stop referring to Victoria Falls, as the attribute we're
talking about is whether the rng is multi-unit capable which
applies to several chip variants now.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add min_timeout (minimum timeout) and max_timeout
values so that the framework can check if the new
timeout value is between the minimum and maximum
timeout values. If both values are 0, then the
framework will leave the check for the watchdog
device driver itself.
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>

Add support for extra ioctl calls by adding a
ioctl watchdog operation. This operation will be
called before we do our own handling of ioctl
commands. This way we can override the internal
ioctl command handling and we can also add
extra ioctl commands. The ioctl watchdog operation
should return the appropriate error codes or
-ENOIOCTLCMD if the ioctl command should be handled
through the internal ioctl handling of the framework.
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>

Add support for the nowayout feature to the
WatchDog Timer Driver Core framework.
This feature prevents the watchdog timer from being
stopped.
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>

Add support for the Magic Close feature to the
WatchDog Timer Driver Core framework.
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>

This part add's the WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl
functionality to the WatchDog Timer Driver Core framework.
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>

This part add's the WDIOC_SETOPTIONS ioctl functionality
to the WatchDog Timer Driver Core framework.
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>

This part add's the WDIOC_KEEPALIVE ioctl functionality to the
WatchDog Timer Driver Core framework. Please note that the
WDIOF_KEEPALIVEPING bit has to be set in the watchdog_info
options field.
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>

This part add's the basic ioctl functionality to the
WatchDog Timer Driver Core framework. The supported
ioctl call's are:
	WDIOC_GETSUPPORT
	WDIOC_GETSTATUS
	WDIOC_GETBOOTSTATUS
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>