When registering a new thermal_device, the thermal framework
will always add a hwmon sysfs interface.

This patch adds a flag to make this behavior optional. Now
when registering a new thermal device, the caller can
optionally inform if hwmon interface is desirable. This can
be done by means of passing a thermal_zone_params.no_hwmon == true.

In order to keep same behavior as of today, all current
calls will by default create the hwmon interface.

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: Zhang Rui <rui.zhang@intel.com>
Suggested-by: NWei Ni <wni@nvidia.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

In order to improve code organization, this patch
moves the hwmon sysfs support to a file named
thermal_hwmon. This helps to add extra support
for hwmon without scrambling the code.

In order to do this move, the hwmon list head is now
using its own locking. Before, the list used
the global thermal locking. Also, some minor changes
in the code were required, as recommended by checkpatch.pl.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>

In case emulated temperature is in use, using the trend
provided by driver layer can lead to bogus situation.
In this case, debugger user would set a temperature value,
but the trend would be from driver computation.

To avoid this situation, this patch changes the get_tz_trend()
to consider the emulated temperature whenever that is in use.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch adds a requirement needing .get_trip_temp() callback
function for registering thermal zone device. This function is
used when thermal zone is updated and essential where thermal core
handles thermal trip based only polling way not hw interrupt.
Signed-off-by: NJonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

Setting policy results in invalid value error.
	% echo "step_wise" > policy
	% echo: write error: Invalid argument

Need clean up of the buffer which "echo" may add based on the arguments, before
comparing aganist list of governor names.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Tested-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch changes the driver to avoid the usage of IS_ERR_OR_NULL()
macro. This macro can lead to dangerous results, like returning
success (0) during a failure scenario (NULL pointer handling).

The case present in this patch has simply be translated to
normal check for NULL and if the pointer has an error code.
The later case is needed because functions like
thermal_zone_get_zone_by_name() could return an ERR_PTR().

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch updates the documentation for thermal_zone_device_register
and removes the warnings generated by scripts/kernel-doc -v.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch updates the documentation for create_trip_attrs
and removes the warnings generated by scripts/kernel-doc -v.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch updates the documentation for thermal_cooling_device_register
and removes the warnings generated by scripts/kernel-doc -v.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch updates the documentation for thermal_zone_unbind_cooling_device
and removes the warnings generated by scripts/kernel-doc -v.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch updates the documentation for thermal_zone_bind_cooling_device
and removes the warnings generated by scripts/kernel-doc -v.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

Restrict usage of GPL modules.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

To follow the prefix names used by the thermal functions,
this patch renames notify_thermal_framework to thermal_notify_framework.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

As per the comment at the top of this file, this is a GPLv2 driver.
This patch updates the driver license accordingly.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

For memory boundaries safety, use strlcpy instead of strcpy.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch exports the thermal_zone_get_temp API so that driver
writers can fetch temperature of thermal zones managed by other
drivers.
Acked-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch adds a helper function to get a reference of
a thermal zone, based on the zone type name.

It will perform a zone name lookup and return a reference
to a thermal zone device that matches the name requested.
In case the zone is not found or when several zones match
same name or if the required parameters are invalid, it will return
the corresponding error code (ERR_PTR).

Cc: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Acked-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

The thermal governors are part of the thermal framework,
rather than a seperate feature/module.
Because the generic thermal layer can not work without
thermal governors, and it must load the thermal governors
during its initialization.

Build them into one module in this patch.

This also fix a problem that the generic thermal layer does not
work when CONFIG_THERMAL=m and CONFIG_THERMAL_GOV_XXX=y.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Acked-by: NDurgadoss R <durgadoss.r@intel.com>

this is the preparation work to build all the thermal core framework
source file, like governors, cpu cooling, etc, into one module.

No functional change in this patch.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Acked-by: NDurgadoss R <durgadoss.r@intel.com>

Convert to the much saner new idr interface.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The return code from the registration of the thermal class is used to
unallocate resources, but this failure isn't passed back to the caller of
thermal_init.  Return this failure back to the caller.

This bug was introduced in changeset 4cb18728 which overwrote the return code
when the variable was re-used to catch the return code of the registration of
the genetlink thermal socket family.
Signed-off-by: NRichard Guy Briggs <rbriggs@redhat.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch adds support to set the emulated temperature method in
thermal zone (sensor). After setting this feature thermal zone may
report this temperature and not the actual temperature. The emulation
implementation may be based on sensor capability through platform
specific handler or pure software emulation if no platform handler defined.

This is useful in debugging different temperature threshold and its
associated cooling action. Critical threshold's cannot be emulated.
Writing 0 on this node should disable emulation.
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch adds an extra check in the data structure while registering
a thermal device. The check is to avoid registering zones with a number
of trips greater than zero, but with no .get_trip_temp nor .get_trip_type
callbacks. Receiving such data structure may end in wrong data access.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

Change the logging messages to used dev_* helper functions.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

No need for spinlocks in this file, then removing its header.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch changes the function thermal_generate_netlink_event
to receive a thermal zone device instead of a originator id.

This way, the messages will always be bound to a thermal zone.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

[   12.761956] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
[   12.762016] IP: [<ffffffffa0005277>] handle_thermal_trip+0x47/0x130 [thermal_sys]
[   12.762060] PGD 1fec74067 PUD 1fee5b067 PMD 0
[   12.762127] Oops: 0000 [#1] SMP
[   12.762177] Modules linked in: hid_generic crc32c_intel usbhid hid firewire_ohci(+) e1000e(+) firewire_core crc_itu_t xhci_hcd(+) thermal(+) fan thermal_sys hwmon
[   12.762423] CPU 1
[   12.762443] Pid: 187, comm: modprobe Tainted: G       A     3.7.0-thermal-module+ #25                  /DH77DF
[   12.762496] RIP: 0010:[<ffffffffa0005277>]  [<ffffffffa0005277>] handle_thermal_trip+0x47/0x130 [thermal_sys]
[   12.762682] RSP: 0018:ffff8801fe7ddc18  EFLAGS: 00010282
[   12.762704] RAX: 0000000000000000 RBX: ffff8801ff3e9c00 RCX: ffff8801fdc39800
[   12.762728] RDX: ffff8801fe7ddc24 RSI: 0000000000000001 RDI: ffff8801ff3e9c00
[   12.762764] RBP: ffff8801fe7ddc48 R08: 0000000004000000 R09: ffffffffa001f568
[   12.762797] R10: ffffffff81363083 R11: 0000000000000001 R12: 0000000000000001
[   12.762832] R13: 0000000000000000 R14: 0000000000000001 R15: ffff8801fde73e68
[   12.762866] FS:  00007f5548516700(0000) GS:ffff88021f240000(0000) knlGS:0000000000000000
[   12.762912] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   12.762946] CR2: 0000000000000018 CR3: 00000001fefe2000 CR4: 00000000001407e0
[   12.762979] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   12.763014] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   12.763048] Process modprobe (pid: 187, threadinfo ffff8801fe7dc000, task ffff8801fe5bdb40)
[   12.763095] Stack:
[   12.763122]  0000000000019640 00000000fdc39800 ffff8801fe7ddc48 ffff8801ff3e9c00
[   12.763225]  0000000000000002 0000000000000000 ffff8801fe7ddc78 ffffffffa00053e7
[   12.763338]  ffff8801ff3e9c00 0000000000006c98 ffffffffa0007480 ffff8801ff3e9c00
[   12.763440] Call Trace:
[   12.763470]  [<ffffffffa00053e7>] thermal_zone_device_update+0x77/0xa0 [thermal_sys]
[   12.763515]  [<ffffffffa0006d38>] thermal_zone_device_register+0x788/0xa88 [thermal_sys]
[   12.763562]  [<ffffffffa001f394>] acpi_thermal_add+0x360/0x4c8 [thermal]
[   12.763598]  [<ffffffff8133902a>] acpi_device_probe+0x50/0x190
[   12.763632]  [<ffffffff811bd793>] ? sysfs_create_link+0x13/0x20
[   12.763666]  [<ffffffff813cc41b>] driver_probe_device+0x7b/0x240
[   12.763699]  [<ffffffff813cc68b>] __driver_attach+0xab/0xb0
[   12.763732]  [<ffffffff813cc5e0>] ? driver_probe_device+0x240/0x240
[   12.763766]  [<ffffffff813ca836>] bus_for_each_dev+0x56/0x90
[   12.763799]  [<ffffffff813cbf4e>] driver_attach+0x1e/0x20
[   12.763831]  [<ffffffff813cbac0>] bus_add_driver+0x190/0x290
[   12.763864]  [<ffffffffa0022000>] ? 0xffffffffa0021fff
[   12.763896]  [<ffffffff813ccbea>] driver_register+0x7a/0x160
[   12.763928]  [<ffffffffa0022000>] ? 0xffffffffa0021fff
[   12.763960]  [<ffffffff813399fb>] acpi_bus_register_driver+0x43/0x45
[   12.763995]  [<ffffffffa002203a>] acpi_thermal_init+0x3a/0x42 [thermal]
[   12.764029]  [<ffffffff8100207f>] do_one_initcall+0x3f/0x170
[   12.764063]  [<ffffffff810b1a5f>] sys_init_module+0x8f/0x200
[   12.764097]  [<ffffffff815ff259>] system_call_fastpath+0x16/0x1b
[   12.764129] Code: 48 8b 87 c8 02 00 00 41 89 f4 48 8d 55 dc ff 50 28 44 8b 6d dc 41 8d 45 fe 83 f8 01 76 5e 48 8b 83 d8 02 00 00 44 89 e6 48 89 df <ff> 50 18 4c 8d a3 10 03 00 00 4c 89 e7 e8 87 f1 5e e1 8b 83 bc
[   12.765164] RIP  [<ffffffffa0005277>] handle_thermal_trip+0x47/0x130 [thermal_sys]
[   12.765223]  RSP <ffff8801fe7ddc18>
[   12.765252] CR2: 0000000000000018
[   12.765284] ---[ end trace 7723294cdfb00d2a ]---

This is because thermal_zone_device_update() is invoked before
any thermal governors being registered.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch fixes the following mutex and NULL pointer
problems in thermal_sys.c:

 * mutex_unlock fix in update_temperature function
 * mutex_unlock fix in bind_cdev function
 * Correct early return to continue in bind_cdev function
 * NULL check fix in bind_cdev function
 * NULL check fix in bind_tz function
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Reported-by: NSedat Dilek <sedat.dilek@gmail.com>
Reported-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch adds a notification API which the sensor drivers'
can use to notify the framework. The framework then takes
care of the throttling according to the configured policy.
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch removes the throttling logic out of
thermal_sys.c; also refactors the code into smaller
functions so that are easy to read/maintain.
 * Seperates the handling of critical and non-critical trips
 * Re-arranges the set_polling and device_check methods, so
   that all related functions are arranged in one place.
 * Removes the 'do_update' and 'trip_update' method, as part
   of moving the throttling logic out of thermal_sys.c
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch makes the thermal_cdev_update function as a
global one, so that other files can use it. This function
serves as a single arbitrator to set the state of a cooling
device.
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch updates the binding logic in thermal_sys.c
It uses the platform layer data to bind a thermal zone
to a cdev for a particular trip point.

 * If we do not have platform data and do not have
   .bind defined, do not bind.
 * If we do not have platform data but .bind is
   defined, then use tz->ops->bind.
 * If we have platform data, use it to create binding.

The same logic sequence is followed for unbind also.
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch adds a policy sysfs attribute to a thermal zone.
This attribute denotes the throttling governor used for the
zone. This is a RW attribute.
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch creates a structure to hold platform
thermal governor information, and provides APIs
for individual thermal governors to register/unregister
with the Thermal framework.
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch adds the thermal zone parameter as an argument to
the tzd_register() function call; and updates other drivers
using this function.
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch adds the following API's to thermal_sys.c, that
can be used by other Thermal drivers.
 * get_tz_trend: obtain the trend of the given thermal zone
 * get_thermal_instance: obtain the instance corresponding
   to the given tz, cdev and the trip point.
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch creates a thermal_core.h file which can contain
all defines used by the core thermal framework files. For
now, move the thermal_instance structure to thermal_core.h
This structure is used by files under drivers/thermal/.
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

To avoid name conflicts:

  drivers/video/riva/fbdev.c:281:9: sparse: preprocessor token MAX_LEVEL redefined

While at it, also make the other names more consistent and add
parentheses.

[akpm@linux-foundation.org: repair fallout]
[sfr@canb.auug.org.au: IB/mlx4: fix for MAX_ID_MASK to MAX_IDR_MASK name change]
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: walter harms <wharms@bfs.de>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The type parameter in thermal_zone_device_register and
thermal_cooling_device_register can be NULL, indicating that no sysfs attribute
for the type should be created. Only call strlen() and strcpy() on type if it is
not NULL.

This patch addresses Coverity #102180 and #102182: Dereference before null check
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>