Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 24 5月, 2011 12 次提交
    • J
      Btrfs: don't try to allocate from a block group that doesn't have enough space · cca1c81f
      由 Josef Bacik 提交于 
      If we have a very large filesystem, we can spend a lot of time in
find_free_extent just trying to allocate from empty block groups.  So instead
check to see if the block group even has enough space for the allocation, and if
not go on to the next block group.
Signed-off-by: NJosef Bacik <josef@redhat.com>
      cca1c81f
    • J
      Btrfs: don't always do readahead · 026fd317
      由 Josef Bacik 提交于 
      Our readahead is sort of sloppy, and really isn't always needed.  For example if
ls is doing a stating ls (which is the default) it's going to stat in non-disk
order, so if say you have a directory with a stupid amount of files, readahead
is going to do nothing but waste time in the case of doing the stat.  Taking the
unconditional readahead out made my test go from 57 minutes to 36 minutes.  This
means that everywhere we do loop through the tree we want to make sure we do set
path->reada properly, so I went through and found all of the places where we
loop through the path and set reada to 1.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
      026fd317
    • J
      Btrfs: try not to sleep as much when doing slow caching · 589d8ade
      由 Josef Bacik 提交于 
      When the fs is super full and we unmount the fs, we could get stuck in this
thing where unmount is waiting for the caching kthread to make progress and the
caching kthread keeps scheduling because we're in the middle of a commit.  So
instead just let the caching kthread keep going and only yeild if
need_resched().  This makes my horrible umount case go from taking up to 10
minutes to taking less than 20 seconds.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
      589d8ade
    • J
      Btrfs: kill BTRFS_I(inode)->block_group · d82a6f1d
      由 Josef Bacik 提交于 
      Originally this was going to be used as a way to give hints to the allocator,
but frankly we can get much better hints elsewhere and it's not even used at all
for anything usefull.  In addition to be completely useless, when we initialize
an inode we try and find a freeish block group to set as the inodes block group,
and with a completely full 40gb fs this takes _forever_, so I imagine with say
1tb fs this is just unbearable.  So just axe the thing altoghether, we don't
need it and it saves us 8 bytes in the inode and saves us 500 microseconds per
inode lookup in my testcase.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
      d82a6f1d
    • J
      Btrfs: don't look at the extent buffer level 3 times in a row · 7e2355ba
      由 Josef Bacik 提交于 
      We have a bit of debugging in btrfs_search_slot to make sure the level of the
cow block is the same as the original block we were cow'ing.  I don't think I've
ever seen this tripped, so kill it.  This saves us 2 kmap's per level in our
search.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
      7e2355ba
    • J
      Btrfs: map the node block when looking for readahead targets · cb25c2ea
      由 Josef Bacik 提交于 
      If we have particularly full nodes, we could call btrfs_node_blockptr up to 32
times, which is 32 pairs of kmap/kunmap, which _sucks_.  So go ahead and map the
extent buffer while we look for readahead targets.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
      cb25c2ea
    • J
      Btrfs: set range_start to the right start in count_range_bits · af60bed2
      由 Josef Bacik 提交于 
      In count_range_bits we are adjusting total_bytes based on the range we are
searching for, but we don't adjust the range start according to the range we are
searching for, which makes for weird results.  For example, if the range

[0-8192]

is set DELALLOC, but I search for 4096-8192, I will get back 4096 for the number
of bytes found, but the range_start will be 0, which makes it look like the
range is [0-4096].  So instead set range_start = max(cur_start, state->start).
This makes everything come out right.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
      af60bed2
    • J
      Btrfs: fix how we do space reservation for truncate · fcb80c2a
      由 Josef Bacik 提交于 
      The ceph guys keep running into problems where we have space reserved in our
orphan block rsv when freeing it up.  This is because they tend to do snapshots
alot, so their truncates tend to use a bunch of space, so when we go to do
things like update the inode we have to steal reservation space in order to make
the reservation happen.  This happens because truncate can use as much space as
it freaking feels like, but we still have to hold space for removing the orphan
item and updating the inode, which will definitely always happen.  So in order
to fix this we need to split all of the reservation stuf up.  So with this patch
we have

1) The orphan block reserve which only holds the space for deleting our orphan
item when everything is over.

2) The truncate block reserve which gets allocated and used specifically for the
space that the truncate will use on a per truncate basis.

3) The transaction will always have 1 item's worth of data reserved so we can
update the inode normally.

Hopefully this will make the ceph problem go away.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
      fcb80c2a
    • J
      Btrfs: kill trans_mutex · a4abeea4
      由 Josef Bacik 提交于 
      We use trans_mutex for lots of things, here's a basic list

1) To serialize trans_handles joining the currently running transaction
2) To make sure that no new trans handles are started while we are committing
3) To protect the dead_roots list and the transaction lists

Really the serializing trans_handles joining is not too hard, and can really get
bogged down in acquiring a reference to the transaction.  So replace the
trans_mutex with a trans_lock spinlock and use it to do the following

1) Protect fs_info->running_transaction.  All trans handles have to do is check
this, and then take a reference of the transaction and keep on going.
2) Protect the fs_info->trans_list.  This doesn't get used too much, basically
it just holds the current transactions, which will usually just be the currently
committing transaction and the currently running transaction at most.
3) Protect the dead roots list.  This is only ever processed by splicing the
list so this is relatively simple.
4) Protect the fs_info->reloc_ctl stuff.  This is very lightweight and was using
the trans_mutex before, so this is a pretty straightforward change.
5) Protect fs_info->no_trans_join.  Because we don't hold the trans_lock over
the entirety of the commit we need to have a way to block new people from
creating a new transaction while we're doing our work.  So we set no_trans_join
and in join_transaction we test to see if that is set, and if it is we do a
wait_on_commit.
6) Make the transaction use count atomic so we don't need to take locks to
modify it when we're dropping references.
7) Add a commit_lock to the transaction to make sure multiple people trying to
commit the same transaction don't race and commit at the same time.
8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl
trans.

I have tested this with xfstests, but obviously it is a pretty hairy change so
lots of testing is greatly appreciated.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
      a4abeea4
    • J
      Btrfs: if we've already started a trans handle, use that one · 2a1eb461
      由 Josef Bacik 提交于 
      We currently track trans handles in current->journal_info, but we don't actually
use it.  This patch fixes it.  This will cover the case where we have multiple
people starting transactions down the call chain.  This keeps us from having to
allocate a new handle and all of that, we just increase the use count of the
current handle, save the old block_rsv, and return.  I tested this with xfstests
and it worked out fine.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
      2a1eb461
    • J
      Btrfs: take away the num_items argument from btrfs_join_transaction · 7a7eaa40
      由 Josef Bacik 提交于 
      I keep forgetting that btrfs_join_transaction() just ignores the num_items
argument, which leads me to sending pointless patches and looking stupid :).  So
just kill the num_items argument from btrfs_join_transaction and
btrfs_start_ioctl_transaction, since neither of them use it.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
      7a7eaa40
    • J
      Btrfs: make sure to use the delalloc reserve when filling delalloc · 74b21075
      由 Josef Bacik 提交于 
      In the prealloc filling code and compressed code we don't set trans->block_rsv
to the delalloc block reserve properly, which is going to make us use metadata
from the wrong pool, this patch fixes that.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
      74b21075
  3. 19 5月, 2011 6 次提交
  5. 18 5月, 2011 19 次提交
  7. 17 5月, 2011 3 次提交