- 07 6月, 2007 9 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
* O32 fadvise64() pass long long arguments by register pairs. Add sys32 version for 64 bit kernel. * N32 readahead() can pass a long long argument by one register. No need to use sys32_readahead. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
sys_fadvise64() is not used on MIPS. The libc can implement both posix_fadvise() and posix_fadvise64() using sys_fadvise64_64(). Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
... by setting DRAM config to 2MB (SNI always used that size). This also fixes video dram size detection in cirrusfb. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Get rid of the cross-arch KGDB specific code which shouldn't have been there in the first place... Signed-off-by: NSergey Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Use common code from hazards.h instead. Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Aside of being handy for debugging this has never been a particularly good idea but is now getting in the way of dyntick / tickless kernels and general cleanups. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 05 6月, 2007 10 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.infradead.org/mtd-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/mtd-2.6: [JFFS2] Fix obsoletion of metadata nodes in jffs2_add_tn_to_tree() [MTD] Fix error checking after get_mtd_device() in get_sb_mtd functions [JFFS2] Fix buffer length calculations in jffs2_get_inode_nodes() [JFFS2] Fix potential memory leak of dead xattrs on unmount. [JFFS2] Fix BUG() caused by failing to discard xattrs on deleted files. [MTD] generalise the handling of MTD-specific superblocks [MTD] [MAPS] don't force uclinux mtd map to be root dev
-
由 Tejun Heo 提交于
Several people have reported LITE-ON LTR-48246S detection failed because SETXFER fails. It seems the device raises IRQ too early after SETXFER. This is controller independent. The same problem has been reported for different controllers. So, now we have pata_via where the controller raises IRQ before it's ready after SETXFER and a device which does similar thing. This patch makes libata always execute SETXFER via polling. As this only happens during EH, performance impact is nil. Setting ATA_TFLAG_POLLING is also moved from issue hot path to ata_dev_set_xfermode() - the only place where SETXFER can be issued. Note that ATA_TFLAG_POLLING applies only to drivers which implement SFF TF interface and use libata HSM. More advanced controllers ignore the flag. This doesn't matter for this fix as SFF TF controllers are the problematic ones. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] JAZZ ESP and SUN ESP need SPI_ATTRS [SCSI] atari_NCR5380: update_timeout removal [SCSI] aacraid: fix shutdown handler to also disable interrupts. [SCSI] qla2xxx: fix timeout in qla2x00_down_timeout [SCSI] fix CONFIG_SCSI_WAIT_SCAN=m
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: reduce raciness when input handlers disconnect Input: ucb1x00 - do not access input_dev->private directly Input: logips2pp - fix typo in Kconfig Input: db9 - do not ignore dev2 module parameter
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [ICMP]: Fix icmp_errors_use_inbound_ifaddr sysctl [IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP [NET] gso: Fix GSO feature mask in sk_setup_caps [TCP]: Fix GSO ignorance of pkts_acked arg (cong.cntrl modules) [NET]: Fix comparisons of unsigned < 0. [NET]: Make net watchdog timers 1 sec jiffy aligned. [ATM]: Fix warning. [TCP]: Use default 32768-61000 outgoing port range in all cases. [AF_UNIX]: Fix datagram connect race causing an OOPS. [TG3]: Fix link problem on Dell's onboard 5906. [AF_UNIX]: Make socket locking much less confusing.
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [ATA]: Don't allow to enable this for SPARC64 without PCI. [VIDEO]: XVR500 and XVR2500 require FB=y
-
由 Andrew Morton 提交于
We've had several reoprts of the CPU jumping to 0x00000000 is do_ioctl(). I assume that there's a race and someone is zeroing out the ioctl handler while this CPU waits for the lock_kernel(). The patch adds code to detect this, then emits stuff which will hopefuly lead us to the culprit. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Rafael gets this on an SMP box with kernel preemption enabled, during hibernation and restore (100% of the time): Enabling non-boot CPUs ... BUG: using smp_processor_id() in preemptible [00000001] code: bash/4514 caller is mtrr_save_state+0x9/0x40 Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Fix SPI dynamic bus ID assignment to start at 2^15-1 rather than a negative number. Valid bus ids are supposed to be positive, and are (now) stored in an 's16' value. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 6月, 2007 20 次提交
-
-
由 David S. Miller 提交于
Reported by Meelis Roos. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Michael Schmitz 提交于
Atari SCSI driver fixes: remove update_timeout kludge Signed-off-by: NMichael Schmitz <schmitz@debian.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Dmitry Torokhov 提交于
There is a race between input handler's release() and disconnect() methods: when input handler disconnects it wakes up all regular users and then process to walk user list to wake up async. users. While disconnect() walks the list release() removes elements of the same list causing oopses. While this is not a substibute for proper locking we can reduce odds of getting an oops if we wake up normal readers after walking the list. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Use input_get_drvdata() and input_set_drvdata() helpers to do that. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Acked-by: NPavel Machek <pavel@ucw.cz>
-
由 David S. Miller 提交于
Based upon a report from Meelis Roos. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Currently when icmp_errors_use_inbound_ifaddr is set and an ICMP error is sent after the packet passed through ip_output(), an address from the outgoing interface is chosen as ICMP source address since skb->dev doesn't point to the incoming interface anymore. Fix this by doing an interface lookup on rt->dst.iif and using that device. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Dong 提交于
Signed-off-by: NWei Dong <weidong@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This isn't a bug just yet as only TCP uses sk_setup_caps for GSO. However, if and when UDP or something else starts using it this is likely to cause a problem if we forget to add software emulation for it at the same time. The problem is that right now we translate GSO emulation to the bitmask NETIF_F_GSO_MASK, which includes every protocol, even ones that we cannot emulate. This patch makes it provide only the ones that we can emulate. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
The code used to ignore GSO completely, passing either way too small or zero pkts_acked when GSO skb or part of it got ACKed. In addition, there is no need to calculate the value in the loop but simple arithmetics after the loop is sufficient. There is no need to handle SYN case specially because congestion control modules are not yet initialized when FLAG_SYN_ACKED is set. Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bill Nottingham 提交于
Recent gcc versions emit warnings when unsigned variables are compared < 0 or >= 0. Signed-off-by: NBill Nottingham <notting@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Venkatesh Pallipadi 提交于
round_jiffies for net dev watchdog timer. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Garzik 提交于
The compiler warning drivers/atm/firestream.c: In function ‘top_off_fp’: drivers/atm/firestream.c:1505: warning: cast to pointer from integer of different size does indicate a bug, albeit a minor one. Fixed, by using a 32-bit temporary prior to the call to bus_to_virt(). The larger bug is still present: the entire driver assumes that machine pointers are 32-bit, as it stores pointers in 32-bit hardware registers. This is obvious to anyone who knows the driver well, but for the casual readers it is helpfully noted with FIXME. Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mark Glines 提交于
This diff changes the default port range used for outgoing connections, from "use 32768-61000 in most cases, but use N-4999 on small boxes (where N is a multiple of 1024, depending on just *how* small the box is)" to just "use 32768-61000 in all cases". I don't believe there are any drawbacks to this change, and it keeps outgoing connection ports farther away from the mess of IANA-registered ports. Signed-off-by: NMark Glines <mark@glines.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Based upon an excellent bug report and initial patch by Frederik Deweerdt. The UNIX datagram connect code blindly dereferences other->sk_socket via the call down to the security_unix_may_send() function. Without locking 'other' that pointer can go NULL via unix_release_sock() which does sock_orphan() which also marks the socket SOCK_DEAD. So we have to lock both 'sk' and 'other' yet avoid all kinds of potential deadlocks (connect to self is OK for datagram sockets and it is possible for two datagram sockets to perform a simultaneous connect to each other). So what we do is have a "double lock" function similar to how we handle this situation in other areas of the kernel. We take the lock of the socket pointer with the smallest address first in order to avoid ABBA style deadlocks. Once we have them both locked, we check to see if SOCK_DEAD is set for 'other' and if so, drop everything and retry the lookup. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The bug is caused by code that always set (TG3_FLAG_USE_MI_INTERRUPT | TG3_FLAG_USE_LINKCHG_REG) on all Dell's onboard devices. With these 2 flags set, the link status is polled by tg3_timer() and will only work when the PHY is set up to interrupt the MAC on link changes. This breaks 5906 because the 5906 PHY does not support TG3_FLAG_USE_MI_INTERRUPT the same as other PHYs. For correctness, only Dell's onboard 5701 needs these 2 flags to be set. This change will fix the 5906 problem and will change other Dell devices except 5700 and 5701 to use the more efficient interrupt-driven link changes. Update version to 3.77. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The unix_state_*() locking macros imply that there is some rwlock kind of thing going on, but the implementation is actually a spinlock which makes the code more confusing than it needs to be. So use plain unix_state_lock and unix_state_unlock. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: NET: add MAINTAINERS entry for ucc_geth driver myri10ge: report link up/down in standard ethtool way NetXen: Removal of extra free_irq call Update tulip maintainer email address smc91x: sh solution engine fixes. e1000: disable polling before registering netdevice network drivers: eliminate unneeded kill_vid code atl1: eliminate unneeded kill_vid code 8139cp: fix VLAN unregistration sky2: Fix VLAN unregistration VLAN: kill_vid is only useful for VLAN filtering devices qla3xxx: device doesnt do hardware checksumming.
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] clean-up watchdog documentation [WATCHDOG] ks8695_wdt.c - new KS8695 watchdog driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix zImage.coff generation for 32-bit pmac [POWERPC] Fix compile breakage for IBM/AMCC 4xx arch/ppc platforms [POWERPC] Don't allow PMAC_APM_EMU for 64-bit [POWERPC] Compare irq numbers with NO_IRQ not IRQ_NONE [POWERPC] Fix return from pte_alloc_one() in out-of-memory case [POWERPC] Fix compile warning in pseries xics code [POWERPC] Don't use HOSTCFLAGS in BOOTCFLAGS [POWERPC] Create a zImage for legacy iSeries [POWERPC] pasemi idle uses hard_smp_processor_id [POWERPC] ps3/interrupt.c uses get_hard_smp_processor_id [POWERPC] Fix possible access to free pages [POWERPC] Fix compiler/assembler flags for Ebony platform boot files [POWERPC] Fix ppc32 single-stepping out of syscalls [POWERPC] Update documentation for of_find_node_by_type()
-
- 03 6月, 2007 1 次提交
-
-
由 Li Yang 提交于
Signed-off-by: NLi Yang <leoli@freescale.com> Acked-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-