- 17 1月, 2010 17 次提交
-
-
由 Roland Dreier 提交于
Add BUILD_BUG_ON_NOT_POWER_OF_2() When code relies on a constant being a power of 2: #define FOO 512 /* must be a power of 2 */ it would be nice to be able to do: BUILD_BUG_ON(!is_power_of_2(FOO)); However applying an inline function does not result in a compile-time constant that can be used with BUILD_BUG_ON(), so trying that gives results in: error: bit-field '<anonymous>' width not an integer constant As suggested by akpm, rather than monkeying around with is_power_of_2() and risking gcc warts about constant expressions, just create a macro BUILD_BUG_ON_NOT_POWER_OF_2() to encapsulate this common requirement. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: David Dillow <dave@thedillows.org> Cc: "Robert P. J. Day" <rpjday@crashcourse.ca> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kazuhisa Ichikawa 提交于
The current check for 'backward merging' within add_active_range() does not seem correct. start_pfn must be compared against early_node_map[i].start_pfn (and NOT against .end_pfn) to find out whether the new region is backward-mergeable with the existing range. Signed-off-by: NKazuhisa Ichikawa <ki@epsilou.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
On my first try using them I missed that the fifos need to be power of two, resulting in a runtime bug. Document that requirement everywhere (and fix one grammar bug) Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NStefani Seibold <stefani@seibold.net> Cc: Roland Dreier <rdreier@cisco.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Walls <awalls@radix.net> Cc: Vikram Dhillon <dhillonv10@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Simple inline that checks if kfifo_init() has been executed on a fifo. This is useful for walking all per CPU fifos, when some of them might not have been brought up yet. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NStefani Seibold <stefani@seibold.net> Cc: Roland Dreier <rdreier@cisco.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Walls <awalls@radix.net> Cc: Vikram Dhillon <dhillonv10@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
In some upcoming code it's useful to peek into a FIFO without permanentely removing data. This patch implements a new kfifo_out_peek() to do this. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NStefani Seibold <stefani@seibold.net> Cc: Roland Dreier <rdreier@cisco.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Walls <awalls@radix.net> Cc: Vikram Dhillon <dhillonv10@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Right now for kfifo_*_user it's not easily possible to distingush between a user copy failing and the FIFO not containing enough data. The problem is that both conditions are multiplexed into the same return code. Avoid this by moving the "copy length" into a separate output parameter and only return 0/-EFAULT in the main return value. I didn't fully adapt the weird "record" variants, those seem to be unused anyways and were rather messy (should they be just removed?) I would appreciate some double checking if I did all the conversions correctly. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Stefani Seibold <stefani@seibold.net> Cc: Roland Dreier <rdreier@cisco.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Walls <awalls@radix.net> Cc: Vikram Dhillon <dhillonv10@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
The pointers to user buffers are currently unsigned char *, which requires a lot of casting in the caller for any non-char typed buffers. Use void * instead. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NStefani Seibold <stefani@seibold.net> Cc: Roland Dreier <rdreier@cisco.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Walls <awalls@radix.net> Cc: Vikram Dhillon <dhillonv10@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
I get a few dozen of these warnings when using gcc (GCC) 4.4.1 20090725 (Red Hat 4.4.1-2): In file included from mmotm-2010-0113-1217/init/do_mounts.c:5: mmotm-2010-0113-1217/include/linux/tty.h: In function 'tty_port_get': mmotm-2010-0113-1217/include/linux/tty.h:469: warning: '______f' is static but declared in inline function 'tty_port_get' which is not static so make the function static inline. [akpm@linux-foundation.org: may as well convert tty_port_users() also] Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tamas Vincze 提交于
EDAC MC0: INTERNAL ERROR: channel-b out of range (4 >= 4) Kernel panic - not syncing: EDAC MC0: Uncorrected Error (XEN) Domain 0 crashed: 'noreboot' set - not rebooting. This happens because FERR_NF_FBD bit 28 is not updated on i5000. Due to that, both bits 28 and 29 may be equal to one, returning channel = 3. As this value is invalid, EDAC core generates the panic. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14568Signed-off-by: NTamas Vincze <tom@vincze.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NDoug Thompson <dougthompson@xmission.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 john stultz 提交于
The m68knommu coldfire pit clocksource looks like it was incorrectly marked as a continuous clocksource. Running with it marked as a continuous clocksource could cause hangs when the system switches to highres mode or enables nohz. This patch removes the CLOCK_SOURCE_IS_CONTINUOUS flag on the coldfire pit clocksource. This will disallow systems using this clocksource from entering oneshot mode (disabling highres timers and nohz). Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Acked-by: NGreg Ungerer <gerg@snapgear.com> Cc: Steven King <sfking@fdwdc.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ping 提交于
This is a new two finger touch Fujitsu Wacom Tablet PC. Signed-off-by: NPing Cheng <pingc@wacom.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hui Zhu 提交于
When I try to use markup_oops.pl in x86, I always get: cat 1 | perl markup_oops.pl ./vmlinux objdump: --start-address: bad number: NaN No matching code found This is because in line: if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/[a-f0-9]/) { $function = $1; $func_offset = $2; } $func_offset will get a number like "0x2" But in follow code: my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset"); It add other ox to ox2. Then this value will be set to NaN. So I made a small patch to fix it. Signed-off-by: NHui Zhu <teawater@gmail.com> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Erik-Jan Post 提交于
Fix a regression in hardware acceleration which made the accelerated framebuffer unusable on some chips. These need extra initialization and an extra flag which is no longer needed/available on current chips. Signed-off-by: NErik-Jan Post <ej.lfs@xs4all.nl> Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Erik-Jan Post 提交于
Reorder viafb_set_par to allow using the updated variables in viafb_setmode. This fixes a regression that prevented proper runtime mode changes. Signed-off-by: NErik-Jan Post <ej.lfs@xs4all.nl> Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
Although I'd consider this a hardware bug, as there is hardware out that for whatever reason does not support hardware cursors on LCD output we have to care about it in the driver. This fixes a regression (invisible cursor) introduced by: viafb: cleanup viafb_cursor Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de> Reported-by: NJulian Wollrath <jwollrath@web.de> Tested-by: NJulian Wollrath <jwollrath@web.de> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stefani Seibold 提交于
Fix a wrong optimization in include/linux/kfifo.h which could cause a race in kfifo_out_locked. Signed-off-by: NStefani Seibold <stefani@seibold.net> Reported-by: NJohan Hovold <jhovold@gmail.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: enable 36bit physical address for hardware status page drm/i915: fix eDP pipe mask drm/i915: fix pixel color depth setting on eDP drm/i915: parse eDP panel color depth from VBT block drm/i915: disable LVDS downclock by default drm/i915: Fix the incorrect cursor A bit definition in DSPFW2 register drm/i915: Remove chatty execbuf failure message. drm/i915: remove loop in Ironlake interrupt handler drm/i915: Don't wait interruptible for possible plane buffer flush drm/i915: try another possible DDC bus for the SDVO device with multiple outputs drm/i915: Read the response after issuing DDC bus switch command drm/i915: Don't use the child device parsed from VBT to setup HDMI/DP drm/i915: Fix resume regression on MSI Wind U100 w/o KMS drm/i915: Fix Ironlake M/N/P ranges to match the spec drm/i915: Use find_pll function to calculate DPLL setting for LVDS downclock drm/i915: Add HP nx9020/SamsungSX20S to ACPI LID quirk list drm/i915: disable TV hotplug status check Trivial conflicts in drivers/gpu/drm/i915/i915_drv.c due to i915 non-modeset suspend fix with different comment.
-
- 16 1月, 2010 15 次提交
-
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux: ARM: MINI2440: Fixup __initdata usage ARM: MINI2440: Fix crash on boot due to improper __initdata qualifier ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulator ARM: S3C: NAND: Check the existence of nr_map before copying
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Ensure index stays within bounds in amd64_get_scrub_rate
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sentelic - fix left/right horizontal scroll mapping Input: pmouse - move Sentelic probe down the list Input: add compat support for sysfs and /proc capabilities output Input: i8042 - add Dritek quirk for Acer Aspire 5610. Input: xbox - do not use GFP_KERNEL under spinlock Input: psmouse - fix Synaptics detection when protocol is disabled Input: bcm5974 - report ABS_MT events Input: davinci_keyscan - add device_enable method to platform data Input: evdev - be less aggressive about sending SIGIO notifies Input: atkbd - fix canceling event_work in disconnect Input: serio - fix potential deadlock when unbinding drivers Input: gf2k - fix &&/|| confusion in gf2k_connect()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: cpumask_of_node() should handle -1 as a node alpha: add myself as a maintainer, and drop mention of 2.4
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: using correct fifo size for SCIF and SCIFA ports. sh: mach-ecovec24: Add motion sensor driver support.
-
由 Zhenyu Wang 提交于
This enables possible 36bit address mask on 965G that use physical address for hw status page. Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Eric Paris 提交于
inotify will WARN() if it finds that the idr and the fsnotify internals somehow got out of sync. It was only supposed to do this once but due to this stupid bug it would warn every single time a problem was detected. Signed-off-by: NEric Paris <eparis@redhat.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Paris 提交于
Since commit 7e790dd5 ("inotify: fix error paths in inotify_update_watch") inotify changed the manor in which it gave watch descriptors back to userspace. Previous to this commit inotify acted like the following: inotify_add_watch(X, Y, Z) = 1 inotify_rm_watch(X, 1); inotify_add_watch(X, Y, Z) = 2 but after this patch inotify would return watch descriptors like so: inotify_add_watch(X, Y, Z) = 1 inotify_rm_watch(X, 1); inotify_add_watch(X, Y, Z) = 1 which I saw as equivalent to opening an fd where open(file) = 1; close(1); open(file) = 1; seemed perfectly reasonable. The issue is that quite a bit of userspace apparently relies on the behavior in which watch descriptors will not be quickly reused. KDE relies on it, I know some selinux packages rely on it, and I have heard complaints from other random sources such as debian bug 558981. Although the man page implies what we do is ok, we broke userspace so this patch almost reverts us to the old behavior. It is still slightly racey and I have patches that would fix that, but they are rather large and this will fix it for all real world cases. The race is as follows: - task1 creates a watch and blocks in idr_new_watch() before it updates the hint. - task2 creates a watch and updates the hint. - task1 updates the hint with it's older wd - task removes the watch created by task2 - task adds a new watch and will reuse the wd originally given to task2 it requires moving some locking around the hint (last_wd) but this should solve it for the real world and be -stable safe. As a side effect this patch papers over a bug in the lib/idr code which is causing a large number WARN's to pop on people's system and many reports in kerneloops.org. I'm working on the root cause of that idr bug seperately but this should make inotify immune to that issue. Signed-off-by: NEric Paris <eparis@redhat.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhenyu Wang 提交于
eDP could be on pipe A or B. Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Zhenyu Wang 提交于
Original DP mode_valid check didn't take pixel color depth into account, which made one 1600x900 eDP panel's mode check invalid because of overclock, but actually this 6bpc panel does can work with x1 lane at 2.7G. This one trys to take bpp value properly both in mode validation and mode setting. Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Zhenyu Wang 提交于
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Jesse Barnes 提交于
Many platform support this feature, and it can provide significant power savings when the reduced refresh rate is low. However, on some platforms a secondary (reduced) timing is provided but not actually supported by the hardware. This results in undesirable flicker at runtime. So disable the feature by default, but allow users to opt-in to the reduced clock behavior with a new module parameter, lvds_downclock, that can be set to 1 to enable the feature. Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Zhao Yakui 提交于
Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Reviewed-by: NEric Anholt <eric@anholt.net> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Eric Anholt 提交于
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> (in principle) Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Zou Nan hai 提交于
On Ironlake, there is an interrupt master control bit. With the bit disabled before clearing IIR, we do not need to handle extra interrupt in a loop. This patch removes the loop in Ironlake interrupt handler. It fixed irq lost issue on some Ironlake platforms. Cc: Stable Team <stable@kernel.org> Signed-off-by: NZou Nan hai <Nanhai.zou@intel.com> Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
- 15 1月, 2010 8 次提交
-
-
由 Roel Kluin 提交于
Add a missing iterator variable thus fixing the conditional of the for-loop in amd64_get_scrub_rate(). Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
由 Ben Dooks 提交于
Remove some of the __initdata tags which are currently inappropriate for platform_device and some of the platform data. These can be returned once support for copying platform devices and data is added. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Uri Yosef 提交于
This patch fix mini2440 crash on boot due to improper __initdata qualifier on mini2440_led1_pdata. Signed-off-by: NUri Yosef <uri.yosef@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Mark Brown 提交于
Since the fixed voltage regulator grew support for GPIO based enables and GPIO 0 is valid on some systems we need to specify that there is no valid GPIO enable control. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Markus Pietrek 提交于
The sh-sci driver used the wrong fifosize for PORT_SCIFA and PORT_SCIF ports. If an incorrect size is used, the serial core will enforce an early shutdown on the port, especially with baudrates < 9600. Signed-off-by: NMarkus Pietrek <Markus.Pietrek@emtrion.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 NISHIMOTO Hiroki 提交于
This patch adds support for the lis3lv02d motion sensor connected via i2c on the Ecovec board. Tested with evtest. Signed-off-by: NNISHIMOTO Hiroki <nishimoto.hiroki@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Anton Blanchard 提交于
CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NMatt Turner <mattst88@gmail.com> CC: linux-alpha@vger.kernel.org CC: Rusty Russell <rusty@rustcorp.com.au> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NAnton Blanchard <anton@samba.org>
-
由 Matt Turner 提交于
CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> CC: linux-alpha@vger.kernel.org Signed-off-by: NMatt Turner <mattst88@gmail.com>
-