Historically drm lacked fb refcounting, so the updating of crtc->fb
was done by the lower levels at a point convenient to get their own
refcounting (e.g. refcounts for the underlying gem bo, pinning
refcounts) right. With the introduction of refcounted fbs the drm core
handled the fb refcounts, but still relied on drivers to update the
crtc->fb pointer (this approach required the least invasive changes in
drivers).

Enforce this contract with a WARN_ON.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Atm the crtc helper implementation of set_config has really
inconsisten semantics: If just an fb update is good enough, dpms state
will be left as-is, but if we do a full modeset we force everything to
dpms on.

This change has already been applied to the i915 modeset code in

commit e3de42b6
Author: Imre Deak <imre.deak@intel.com>
Date:   Fri May 3 19:44:07 2013 +0200

    drm/i915: force full modeset if the connector is in DPMS OFF mode

which according to Greg KH seems to aim for a new record in most
Bugzilla: links in a commit message.

The history of this dpms forcing is pretty interesting. This patch
here is an almost-revert of

commit 811aaa55
Author: Keith Packard <keithp@keithp.com>
Date:   Thu Feb 3 16:57:28 2011 -0800

    drm: Only set DPMS ON when actually configuring a mode

which fixed the bug of trying to dpms on disabled outputs, but
introduced the new discrepancy between an fb update only and full
modesets. The actual introduction of this goes back to

commit bf9dc102
Author: Keith Packard <keithp@keithp.com>
Date:   Fri Nov 26 10:45:58 2010 -0800

    drm: Set connector DPMS status to ON in drm_crtc_helper_set_config

And if you'd dig around in the i915 driver code there's even more fun
around forcing dpms on and losing our heads and temper of the
resulting inconsistencies. Especially the DP re-training code had tons
of funny stuff in it.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

... since we already check for fb->pixel_format, which encodes all
this. The other two fields are only for backwards compat of older
drivers (and we might want to look into eventually just killing them).
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

There's no point in trying to clean up after driver-bugs, so just blow
up. Furthermore it's an interface abuse to set no mode but have an fb
and aslo to try to set an fb without enough connectors. These two
spefici cases of interface abuse have been committed by the fb helper,
but that's been fixed meanwhile in

commit 7e53f3a4
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Jan 21 10:52:17 2013 +0100

    drm/fb-helper: fixup set_config semantics

The i915 driver has been shipping since a while with these BUGs with
no reports, so should be save.

Note that this drops an ugly case where we clear crtc->fb behind the
upper levels back and so cause a refcounting mayhem, which Russell
Kins spotted while trying to hunt down a drm framebuffer leak.
Reported-by: NRussell King <linux@arm.linux.org.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

io_remap_pfn_range already sets this internally.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The preferred_bpp value in currently hard-coded to 16.
This causes color corruption on the am335x-evm lcd panel which
requires 32 bpp instead. This changes attempts to use the configured
bpp value from the DT or built-in panel-info struct.
Signed-off-by: NBenoit Parrot <bparrot@ti.com>
Acked-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The enabled field has been removed from struct drm_plane. Don't use it
in the driver.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Running mgag200_driver_unload when the driver init fails early on
causes functions like drm_mode_config_cleanup to be called. The
problem is, drm_mode_config_cleanup crashes because the corresponding
init hasn't happend yet. There really isn't anything to cleanup after
mgag200_device_init, so we can just pass the error code upwards.
Acked-by: NJulia Lemire <jlemire@matrox.com>
Signed-off-by: NChristopher Harvey <charvey@matrox.com>
Acked-by: NPaul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: NDave Airlie <airlied@gmail.com>

G200 cards support, at best, 16 colour palleted images for the cursor
so we do a conversion in the cursor_set function, and reject cursors
with more than 16 colours, or cursors with partial transparency. Xorg
falls back gracefully to software cursors in this case.

We can't disable/enable the cursor hardware without causing momentary
corruption around the cursor. Instead, once the cursor is on we leave
it on, and simulate turning the cursor off by moving it
offscreen. This works well.

Since we can't disable -> update -> enable the cursors, we double
buffer cursor icons, then just move the base address that points to
the old cursor, to the new. This also works well, but uses an extra
page of memory.

The cursor buffers are lazily-allocated on first cursor_set. This is
to make sure they don't take priority over any framebuffers in case of
limited memory.

Here is a representation of how the bitmap for the cursor is mapped in G200 memory :

  Each line of color cursor use 6 Slices of 8 bytes. Slices 0 to 3
  are used for the 4bpp bitmap, slice 4 for XOR mask and slice 5 for
  AND mask. Each line has the following format:

      //      Byte 0  Byte 1  Byte 2  Byte 3  Byte 4  Byte 5  Byte 6 Byte 7
      //
      // S0:  P00-01  P02-03  P04-05  P06-07  P08-09  P10-11  P12-13 P14-15
      // S1:  P16-17  P18-19  P20-21  P22-23  P24-25  P26-27  P28-29 P30-31
      // S2:  P32-33  P34-35  P36-37  P38-39  P40-41  P42-43  P44-45 P46-47
      // S3:  P48-49  P50-51  P52-53  P54-55  P56-57  P58-59  P60-61 P62-63
      // S4:  X63-56  X55-48  X47-40  X39-32  X31-24  X23-16  X15-08 X07-00
      // S5:  A63-56  A55-48  A47-40  A39-32  A31-24  A23-16  A15-08 A07-00
      //
      //       S0 to S5      = Slices 0 to 5
      //       P00 to P63    = Bitmap - pixels 0 to 63
      //       X00 to X63    = always 0 - pixels 0 to 63
      //       A00 to A63    = transparent markers - pixels 0 to 63
      //                       1 means colour, 0 means transparent
Signed-off-by: NChristopher Harvey <charvey@matrox.com>
Signed-off-by: NMathieu Larouche <mathieu.larouche@matrox.com>
Acked-by: NJulia Lemire <jlemire@matrox.com>
Tested-by: NJulia Lemire <jlemire@matrox.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

Many of the drivers didn't implement palette/gamma handling, but were forced
to provide stubs for the hooks to avoid drm_fb_helper from oopsing. Now that
the hooks are optional, we can eliminate all the stubs.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@gmail.com>

Check whether the crtc provides the load_lut callback before calling it.
This allows the driver to provide the hook only for those CRTCs that
actually have the hardware support for it.

Also check whether the driver provided the fb_helper gamma_set/gamma_get
hooks. It's a driver bug if it allows non-truecolor fbdev visuals w/o
these hooks, but auditing all the drivers is too tedious. So just slap
a big WARN_ON() there and bail out before things start to explode.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@gmail.com>

Perform the drm_fb_helper_is_bound() check to avoid clobbering the
display palette of some other KMS client.

While at it, fix up the locking by grabbing all modeset locks for the
duration of the fb_setcmap operation.

v2: Make a note of the locking changes in the commit message
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

There's a bunch of unused members inside drm_plane, bloating the size of
the structure needlessly. Eliminate them.

v2: Remove all of it from kernel-doc too
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

plane->enabled is never set, so this code didn't do anything.

Also drm_fb_helper_restore_fbdev_mode() will now disable all cursors
and sprites for us, so we don't have to bother anymore.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

v2: Follow the drm_crtc documentation fixes
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

Cursors and plane can obscure whatever fbdev wants to show the user.
Disable them all in drm_fb_helper_restore_fbdev_mode.

After the cursors and planes have been disabled, user space needs to
explicitly re-enable them to make them visible again.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@gmail.com>

drm_plane_force_disable() will forcibly disable the plane even if user
had previously requested the plane to be enabled.

This can be used to force planes to be off when restoring the fbdev
mode.

The code was simply pulled from drm_framebuffer_remove(), which now
calls the new function as well.

v2: Check plane->fb in drm_plane_force_disable(), drop bogus comment
    about disabling crtc
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@gmail.com>

Having both modes can be beneficial for video playback cases. If you can
match the video framerate exactly, and the audio and video clocks come
from the same source, you should be able to avoid dropped/repeated
frames without expensive operations such as resampling the audio to
match video output rate.

Rather than add both variants based on the CEA extension short video
descriptors in do_cea_modes(), add only one variant there. Once all
the EDID has been fully probed, do a loop over the entire probed mode
list, during which we add the other variants for all modes that match
CEA modes. This allows us to match modes that didn't come via the CEA
short video descriptors. For example one Samsung TV here doesn't have
the 640x480-60 mode as a SVD, but instead it's specified via a detailed
timing descriptor.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We want to disable the cursor by calling ->cursor_set() with handle=0
from places where we don't have a file_priv, so don't try to access it
unless necessary.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-next-2013-06-01' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Daniel writes:
Another round of drm-intel-next for 3.11. Highlights:
- Haswell IPS support (Paulo Zanoni)
- VECS support on Haswell (Ben Widawsky, Xiang Haihao, ...)
- Haswell watermark fixes (Paulo Zanoni)
- "Make the gun bigger again" multithread fence fix from Chris.
- i915_error_state finnally no longer fails with -ENOMEM! Big thanks to
  Mika for tackling this.
- vlv sideband locking fixes from Jani
- Hangcheck prep work for arb_robustness support (Mika&Chris)
- edp vs cpu port confusion clean-up from Imre
- pile of smaller fixes and cleanups all over.

* tag 'drm-intel-next-2013-06-01' of git://people.freedesktop.org/~danvet/drm-intel: (70 commits)
  drm/i915: add i915_ips_status debugfs entry
  drm/i915: add enable_ips module option
  drm/i915: implement IPS feature
  drm/i915: fix up the edp power well check
  drm/i915: add I915_PARAM_HAS_VEBOX to i915_getparam
  drm/i915: add I915_EXEC_VEBOX to i915_gem_do_execbuffer()
  drm/i915: add VEBOX into debugfs
  drm/i915: Enable vebox interrupts
  drm/i915: vebox interrupt get/put
  drm/i915: consolidate interrupt naming scheme
  drm/i915: Convert irq_refounct to struct
  drm/i915: make PM interrupt writes non-destructive
  drm/i915: Add PM regs to pre/post install
  drm/i915: Create an ivybridge_irq_preinstall
  drm/i915: Create a more generic pm handler for hsw+
  drm/i915: add support for 5/6 data buffer partitioning on Haswell
  drm/i915: properly set HSW WM_LP watermarks
  drm/i915: properly set HSW WM_PIPE registers
  drm/i915: fix pch_nop support
  drm/i915: Vebox ringbuffer init
  ...

Keeping the modes sorted by vrefresh before the pixel clock makes the
mode list somehow more pleasing to the eye.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Keeping the modes in the same order as we probe them makes it a bit
easier to track what's happening.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Preserve the destination mode's list head in drm_mode_copy. Just
in case someone decides that it's a good idea to overwrite a mode which
happens to be on some list,
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

GEM CMA PRIME support from Laurent.

* 'drm/next' of git://linuxtv.org/pinchartl/fbdev:
  drm: GEM CMA: Add DRM PRIME support
  drm: GEM CMA: Split object mapping into GEM mapping and CMA mapping
  drm: GEM CMA: Split object creation into object alloc and DMA memory alloc
  drm/omap: Use drm_gem_mmap_obj() to implement dma-buf mmap
  drm/gem: Split drm_gem_mmap() into object search and object mapping

The structures and strings involved with various pretty-print functions
aren't meant to be modified, so make them all const. The exception is
drm_connector_enum_list which does get modified in drm_connector_init().

While at it move the drm_get_connector_status_name() prototype from
drmP.h to drm_crtc.h where it belongs.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use drm_get_format_name to print more readable pixel format names
in debug output.

Also unify the debug messages to say "unsupported pixel format",
which better describes what is going on.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Rather than just printing the pixel format as a hex number, decode the
fourcc into human readable form, and also decode the LE vs. BE flag.

Keep printing the raw hex number too in case it contains non-printable
characters.

Some examples what the new drm_get_format_name() produces:
DRM_FORMAT_XRGB8888: "XR24 little-endian (0x34325258)"
DRM_FORMAT_YUYV: "YUYV little-endian (0x56595559)"
DRM_FORMAT_RGB565|DRM_FORMAT_BIG_ENDIAN: "RG16 big-endian (0xb6314752)"
Unprintable characters: "D??? big-endian (0xff7f0244)"

v2: Fix patch author
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This allows importing bo's to own device to work without requiring that the buffer is pinned in GART.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Prevents buffers from being pinned forever.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

The CMA-specific mapping code will be used to implement dma-buf mmap
support.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>

This allows creating a GEM CMA object without an associated DMA memory
buffer, and will be used to implement DRM PRIME support.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

The dma-buf mmap code was copied from the GEM mmap implementation.
Replace it with the new drm_gem_mmap_obj() function.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

The drm_gem_mmap() function first finds the GEM object to be mapped
based on the fake mmap offset and then maps the object. Split the object
mapping code into a standalone drm_gem_mmap_obj() function that can be
used to implement dma-buf mmap() operations.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>