[   89.237347] BUG: unable to handle kernel paging request at ffff880096326000
[   89.237369] IP: [<ffffffff81347227>] gen6_ppgtt_insert_entries+0x117/0x170
[   89.237382] PGD 2272067 PUD 25df0e067 PMD 25de5c067 PTE 8000000096326060
[   89.237394] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[   89.237404] CPU: 1 PID: 1981 Comm: gem_concurrent_ Not tainted 3.13.0-rc4+ #639
[   89.237411] Hardware name: Intel Corporation 2012 Client Platform/Emerald Lake 2, BIOS ACRVMBY1.86C.0078.P00.1201161002 01/16/2012
[   89.237420] task: ffff88024c038030 ti: ffff88024b130000 task.ti: ffff88024b130000
[   89.237425] RIP: 0010:[<ffffffff81347227>]  [<ffffffff81347227>] gen6_ppgtt_insert_entries+0x117/0x170
[   89.237435] RSP: 0018:ffff88024b131ae0  EFLAGS: 00010286
[   89.237440] RAX: ffff880096325000 RBX: 0000000000000400 RCX: 0000000000001000
[   89.237445] RDX: 0000000000000200 RSI: 0000000000000001 RDI: 0000000000000010
[   89.237451] RBP: ffff88024b131b30 R08: ffff88024cc3aef0 R09: 0000000000000000
[   89.237456] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88024cc3ae00
[   89.237462] R13: ffff88024a578000 R14: 0000000000000001 R15: ffff88024a578ffc
[   89.237469] FS:  00007ff5475d8900(0000) GS:ffff88025d020000(0000) knlGS:0000000000000000
[   89.237475] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   89.237480] CR2: ffff880096326000 CR3: 000000024d531000 CR4: 00000000001407e0
[   89.237485] Stack:
[   89.237488]  ffff880000000000 0000020000000000 ffff88024b23f2c0 0000000100000000
[   89.237499]  0000000000000001 000000000007ffff ffff8801e7bf5ac0 ffff8801e7bf5ac0
[   89.237510]  ffff88024cc3ae00 ffff880248a2ee40 ffff88024b131b58 ffffffff813455ed
[   89.237521] Call Trace:
[   89.237528]  [<ffffffff813455ed>] ppgtt_bind_vma+0x3d/0x60
[   89.237534]  [<ffffffff8133d8dc>] i915_gem_object_pin+0x55c/0x6a0
[   89.237541]  [<ffffffff8134275b>] i915_gem_execbuffer_reserve_vma.isra.14+0x5b/0x110
[   89.237548]  [<ffffffff81342a88>] i915_gem_execbuffer_reserve+0x278/0x2c0
[   89.237555]  [<ffffffff81343d29>] i915_gem_do_execbuffer.isra.22+0x699/0x1250
[   89.237562]  [<ffffffff81344d91>] ? i915_gem_execbuffer2+0x51/0x290
[   89.237569]  [<ffffffff81344de6>] i915_gem_execbuffer2+0xa6/0x290
[   89.237575]  [<ffffffff813014f2>] drm_ioctl+0x4d2/0x610
[   89.237582]  [<ffffffff81080bf1>] ? cpuacct_account_field+0xa1/0xc0
[   89.237588]  [<ffffffff81080b55>] ? cpuacct_account_field+0x5/0xc0
[   89.237597]  [<ffffffff811371c0>] do_vfs_ioctl+0x300/0x520
[   89.237603]  [<ffffffff810757a1>] ? vtime_account_user+0x91/0xa0
[   89.237610]  [<ffffffff810e40eb>] ?  context_tracking_user_exit+0x9b/0xe0
[   89.237617]  [<ffffffff81083d7d>] ? trace_hardirqs_on+0xd/0x10
[   89.237623]  [<ffffffff81137425>] SyS_ioctl+0x45/0x80
[   89.237630]  [<ffffffff815afffa>] tracesys+0xd4/0xd9
[   89.237634] Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 0f 1f 84 00 00 00 00 00 83 45 bc 01 49 8b 84 24 78 01 00 00 65 ff 0c 25 e0 b8 00 00 8b 55 bc <4c> 8b 2c d0 65 ff 04 25 e0 b8 00 00 49 8b 45 00 48 c1 e8 2d 48
[   89.237741] RIP  [<ffffffff81347227>] gen6_ppgtt_insert_entries+0x117/0x170
[   89.237749]  RSP <ffff88024b131ae0>
[   89.237753] CR2: ffff880096326000
[   89.237758] ---[ end trace 27416ba8b18d496c ]---

This bug dates back to the original introduction of the
gen6_ppgtt_insert_entries()
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
[danvet: Dropped cc: stable since without full ppgtt there's no way
we'll access the last page directory with this function since that
range is occupied (only in the allocator) with the ppgtt pdes. Without
aliasing we can start to use that range and blow up.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The iommu and gfx on Ironlake do not like each other and require a
big hammer to prevent hard machine hangs. In

commit 5c042287
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Mon Oct 17 15:51:55 2011 -0700

    drm/i915: ILK + VT-d workaround

we added the workaround, but never emitted any debug message that it was
active. Doing so should help identify known performance regressions.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since get_pid_task() grabs a reference on the task_struct, we have to drop the
refcount after reading that task's comm name. Use pid_task() with RCU instead.

Also, avoid directly reading like pid_task()->comm because
pid_task() will return NULL if the task have already exit()ed.

This patch fixes both problems.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

But only when we indeed set up a gtt mapping. We need this since the
vma also holds a pages_pin_count, on top of the unconditional
pages_pin_count we grab for all stolen objects (to avoid swap-out).

This should avoid a pages_pin_count underrun when cleaning up
framebuffers objects taken over from the BIOS.

Chris mentioned in his review that this bug even predates the vma
conversion.
Reported-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We use this hook starting from ILK onwards, so change the prefix
accordingly. Also rename functions/struct names used from
haswell_update_wm that are relevant to ILK already.

No functional change.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

No functional change.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Apparently always enabling the sprite scaler magically made
sprites work on ILK in the past.

I think the real reason for the failure was missing sprite
watermark programming, and enabling the scaler effectively
disabled LP1+ watermarks, which was enough to keep things going.
Or it might be that the hardware more or less ignores watermarks
for scaled sprites since things seem to work even if I leave
sprite watermarks at 0 and disable all other planes except the
sprite.

In any case, we left the scaler always on but then failed to
check whether we might be exceeding the scaler's source size
limits. That caused the sprite to fail when a sufficiently
large unscaled image was being displayed.

Now that we're getting proper watermark programming for ILK, we
can keep the scaler disabled unless we need to do actual scaling.

This reverts commit 8aaa81a1.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As the watermark registers aren't double bufferd, clearing the
watermarks immediately after writing the sprite registers can be
hazardous.

Until we have something better, add a wait for vblank between the
two steps to make sure the sprite no longer needs the watermark
levels before we clear them.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When color keying is used, the primary may not be invisible even though
the sprite fully covers it. So check for color keying before deciding to
disable the primary plane.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We now have a very clear method of disabling LP1+ wartermarks,
and we can actually detect if we actually did disable them, or
if they were already disabled. Use that to clean up the
WaCxSRDisabledForSpriteScaling:ivb handling.

I was hoping to apply the workaround in a way that wouldn't
require a blocking wait, but sadly IVB really does appear to
require LP1+ watermarks to be off for an entire frame before
enabling sprite scaling. Simply disabling LP1+ watermarks
during the previous frame is not enough, no matter how early
in the frame we do it :(
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The new HSW watermark code can now handle ILK/SNB/IVB as well, so
switch them over. Kill the old code.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

ILK doesn't like if we just write the LP1+ watermarks registers with 0.
We need to just disable the watermarks by clearing the enable bit. Use
that method also when disabling LP1+ watermarks in init_clock_gating.

It looks like disabling the sprite LP1 watermarks can cause underruns
even if we just toggle the WM1S_LP_EN bit. So treat that bit like the
actual watermark numbers and avoid setting it to 0 immediately.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Linetime watermarks don't exist on ILK/SNB/IVB, so don't compute them
except on HSW.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

ILK has a bunch of issues with FBC. First of all, BSpec tells us that
FBC WM should never be enabled. Secondly when FBC is enabled
with FBC WM disabled, LP2+ watermarks must be disabled.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Multi-pipe LP1+ watermarks are a HSW+ feature, so let's not do it on
earlier generations.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On ILK disabling LP1+ watermarks must be done carefully to avoid
underruns. If we just write 0 to the register in the middle of the scan
cycle we often get an underrun. So instead we have to leave the actual
watermark levels in the register intact, and just toggle the enable bit.

Presumably the hardware takes a while to get out of low power mode, and
so the watermark level need to stay valid until that time.

We also have to be careful with the WM1S_LP_EN bit. It seems the
hardware more or less treats it like the actual watermarks numbers, and
so we must not toggle it too soon. Just leave it alone when disabling
the LP1+ watermarks.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

ILK/SNB don't have LP2+ watermarks for sprites. Also the LP1 sprite
watermark register has its own enable bit. Take these differences
into account when programming the LP1+ registers.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On ILK/SNB only LP0/1 watermarks can be enabled when sprites are
enabled, and on ILK/SNB/IVB sprite scaling is limited to LP0 only.

So we can avoid computing the extra levels we're never going to use.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add a new function  ilk_wm_lp_latency() which will tell us what to write
into the WM_LPx register latency field. HSW is different from erlier
gens in this regard.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On IVB the display data buffer partitioning control lives in the
DISP_ARB_CTL2 register. Add the relevant defines/code for it.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise we don't kick out firmware framebuffers like vesafb and
efifb when CONFIG_DRM_I915_FBDEV=n but CONFIG_FB=y.

There's still the pesky issue with vgacon which we should somehow
replace with the dummy console at least. We have a similar issue at
module un/reload, since vgacon state is terminally botched after
i915.ko has loaded in modeset mode. But this gets us a step further at
least.

v2: Use IS_ENABLED - I always get this wrong for tristates. Spotted by
Jani.
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Noticed while reviewing a patch and couldn't resist the OCD.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Aside from the fact that it leaves confusing dumps on error capture, it
is entirely unnecessary, and potentially harmful in cases like BDW,
where the instruction has changed.

In reality (seemingly), this will have no behavioral impact.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

A few command were out of numerical order and had different spacing. Put
them back in numerical order, with proper spacing.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We only need to init the reg offset for DPIO once, but we need to reset
DPIO at resume time and at init time.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just add an early init since we may need to access DPIO regs early on.
The init call in modeset_init_hw is also needed for the resume case,
when we need to reset DPIO to keep things happy.

v2: split reset and reg init
v3: split patches (Daniel)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The whole file is wrapped around in #if defined(CONFIG_DEBUG_FS) anyway,
so skip the file at the build level already.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In case of error, the function debugfs_create_file() returns NULL
pointer not ERR_PTR() if debugfs is enabled. The IS_ERR() test in
the return value check should be replaced with NULL test.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We don't actually do anything with the information yet, but parse and
log what's in the VBT.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that all the infrastructure is in place and all the tests from
pm_pc8 pass, we can finally enable the feature.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

So we'll get a fault when someone tries to access the mmap, then we'll
wake up from D3.

v2: - Rebase
v3: - Use gtt active/inactive

Testcase: igt/pm_pc8/gem-mmap-gtt
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Add comment + WARN as discussed with Paulo on irc.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The hangcheck function requires the hardware to be working, and if
we're suspending we're going to put the HW in D3 state.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

WaVSRefCountFullforceMissDisable and
WaDSRefCountFullforceMissDisable

VS is a carry-over from HSW, and DS is likely not used by anyone yet.

Cc: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
[danvet: Line of 106 chars is too long. Really.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I stumbled on to some unimplemented errata. To be honest, I am not
really sure of the impact, just that the docs say to do.

No w/a name for this one.

v2: v1 was a stale thing which should have never seen the light of day.
(Haihao)

Cc: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Not all registers need forcewake even if they're not shadowed.
Add the missing check to gen8_writeX() to avoid needless forcewake
usage when writing eg. display registers.

v2: Use straight up <0x40000 check instead of NEEDS_FORCE_WAKE()
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The BIOS or someone else might have done something bad and there
might be old GT FIFO erros reported in GTFIFODBG. Clear those out
in intel_uncore_early_sanitize() to make sure we don't mistake them
for our problems.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If test is running, irq_get was not called so we should gain
balance by not doing irq_put

"So the rule is: if you access unlocked values, you use ACCESS_ONCE().
You don't say "but it can't matter". Because you simply don't know."
-- Linus

v2: use local variable so it can't change during test (Chris)

v3: update commit msg and use ACCESS_ONCE (Ville)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Don't touch DPFC_RECOMP_CTL on FBC2, use RMW to update
the FBC_CONTROL on FBC1 to make it easier for people to
experiment with different numbers. Also fix the interval
mask for FBC1.

v2: Rebased
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>