- 07 8月, 2019 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Masahiro Yamada 提交于
commit 5241ab4cf42d3a93b933b55d3d53f43049081fa1 upstream. CLANG_FLAGS is initialized by the following line: CLANG_FLAGS := --target=$(notdir $(CROSS_COMPILE:%-=%)) ..., which is run only when CROSS_COMPILE is set. Some build targets (bindeb-pkg etc.) recurse to the top Makefile. When you build the kernel with Clang but without CROSS_COMPILE, the same compiler flags such as -no-integrated-as are accumulated into CLANG_FLAGS. If you run 'make CC=clang' and then 'make CC=clang bindeb-pkg', Kbuild will recompile everything needlessly due to the build command change. Fix this by correctly initializing CLANG_FLAGS. Fixes: 238bcbc4e07f ("kbuild: consolidate Clang compiler flags") Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NNathan Chancellor <natechancellor@gmail.com> Acked-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 8月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 31 7月, 2019 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Nathan Chancellor 提交于
[ Upstream commit 589834b3a0097a4908f4112eac0ca2feb486fa32 ] In commit ebcc5928c5d9 ("arm64: Silence gcc warnings about arch ABI drift"), the arm64 Makefile added -Wno-psabi to KBUILD_CFLAGS, which is a GCC only option so clang rightfully complains: warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option] https://clang.llvm.org/docs/DiagnosticsReference.html#wunknown-warning-option However, by default, this is merely a warning so the build happily goes on with a slew of these warnings in the process. Commit c3f0d0bc ("kbuild, LLVMLinux: Add -Werror to cc-option to support clang") worked around this behavior in cc-option by adding -Werror so that unknown flags cause an error. However, this all happens silently and when an unknown flag is added to the build unconditionally like -Wno-psabi, cc-option will always fail because there is always an unknown flag in the list of flags. This manifested as link time failures in the arm64 libstub because -fno-stack-protector didn't get added to KBUILD_CFLAGS. To avoid these weird cryptic failures in the future, make clang behave like gcc and immediately error when it encounters an unknown flag by adding -Werror=unknown-warning-option to CLANG_FLAGS. This can be added unconditionally for clang because it is supported by at least 3.0.0, according to godbolt [1] and 4.0.0, according to its documentation [2], which is far earlier than we typically support. [1]: https://godbolt.org/z/7F7rm3 [2]: https://releases.llvm.org/4.0.0/tools/clang/docs/DiagnosticsReference.html#wunknown-warning-option Link: https://github.com/ClangBuiltLinux/linux/issues/511 Link: https://github.com/ClangBuiltLinux/linux/issues/517Suggested-by: NPeter Smith <peter.smith@linaro.org> Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Tested-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
- 28 7月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 26 7月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 21 7月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 14 7月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 10 7月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 03 7月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 25 6月, 2019 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Linus Torvalds 提交于
commit 6f303d60534c46aa1a239f29c321f95c83dda748 upstream. We already did this for clang, but now gcc has that warning too. Yes, yes, the address may be unaligned. And that's kind of the point. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 6月, 2019 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Greg Kroah-Hartman 提交于
-
- 19 6月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 18 6月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 15 6月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 11 6月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 09 6月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 04 6月, 2019 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Masahiro Yamada 提交于
commit e9666d10a5677a494260d60d1fa0b73cc7646eb3 upstream. Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label". The jump label is controlled by HAVE_JUMP_LABEL, which is defined like this: #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL) # define HAVE_JUMP_LABEL #endif We can improve this by testing 'asm goto' support in Kconfig, then make JUMP_LABEL depend on CC_HAS_ASM_GOTO. Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will match to the real kernel capability. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: NSedat Dilek <sedat.dilek@gmail.com> [nc: Fix trivial conflicts in 4.19 arch/xtensa/kernel/jump_label.c doesn't exist yet Ensured CC_HAVE_ASM_GOTO and HAVE_JUMP_LABEL were sufficiently eliminated] Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 31 5月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 26 5月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 22 5月, 2019 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Masahiro Yamada 提交于
commit d2f8ae0e4c5c754f1b2a7b8388d19a1a977e698a upstream. syncconfig is responsible for keeping auto.conf up-to-date, so if it fails for any reason, the build must be terminated immediately. However, since commit 9390dff66a52 ("kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing"), Kbuild continues running even after syncconfig fails. You can confirm this by intentionally making syncconfig error out: # diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c # index 08ba146..307b9de 100644 # --- a/scripts/kconfig/confdata.c # +++ b/scripts/kconfig/confdata.c # @@ -1023,6 +1023,9 @@ int conf_write_autoconf(int overwrite) # FILE *out, *tristate, *out_h; # int i; # # + if (overwrite) # + return 1; # + # if (!overwrite && is_present(autoconf_name)) # return 0; Then, syncconfig fails, but Make would not stop: $ make -s mrproper allyesconfig defconfig $ make scripts/kconfig/conf --syncconfig Kconfig *** Error during sync of the configuration. make[2]: *** [scripts/kconfig/Makefile;69: syncconfig] Error 1 make[1]: *** [Makefile;557: syncconfig] Error 2 make: *** [include/config/auto.conf.cmd] Deleting file 'include/config/tristate.conf' make: Failed to remake makefile 'include/config/auto.conf'. SYSTBL arch/x86/include/generated/asm/syscalls_32.h SYSHDR arch/x86/include/generated/asm/unistd_32_ia32.h SYSHDR arch/x86/include/generated/asm/unistd_64_x32.h SYSTBL arch/x86/include/generated/asm/syscalls_64.h [ continue running ... ] The reason is in the behavior of a pattern rule with multi-targets. %/auto.conf %/auto.conf.cmd %/tristate.conf: $(KCONFIG_CONFIG) $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig GNU Make knows this rule is responsible for making all the three files simultaneously. As far as examined, auto.conf.cmd is the target in question when this rule is invoked. It is probably because auto.conf.cmd is included below the inclusion of auto.conf. The inclusion of auto.conf is mandatory, while that of auto.conf.cmd is optional. GNU Make does not care about the failure in the process of updating optional include files. I filed this issue (https://savannah.gnu.org/bugs/?56301) in case this behavior could be improved somehow in future releases of GNU Make. Anyway, it is quite easy to fix our Makefile. Given that auto.conf is already a mandatory include file, there is no reason to stick auto.conf.cmd optional. Make it mandatory as well. Cc: linux-stable <stable@vger.kernel.org> # 5.0+ Fixes: 9390dff66a52 ("kbuild: invoke syncconfig if include/config/auto.conf.cmd is missing") Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> [commented out diff above to keep patch happy - gregkh] Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 17 5月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 15 5月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 10 5月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 08 5月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 05 5月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 04 5月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 02 5月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 27 4月, 2019 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Matthias Kaehlcke 提交于
commit a75bb4eb9e565b9f5115e2e8c07377ce32cbe69a upstream. The clang option -Oz enables *aggressive* optimization for size, which doesn't necessarily result in smaller images, but can have negative impact on performance. Switch back to the less aggressive -Os. This reverts commit 6748cb3c. Suggested-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NMatthias Kaehlcke <mka@chromium.org> Reviewed-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
- 20 4月, 2019 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
- 17 4月, 2019 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Nick Desaulniers 提交于
commit ad15006cc78459d059af56729c4d9bed7c7fd860 upstream. This causes an issue when trying to build with `make LD=ld.lld` if ld.lld and the rest of your cross tools aren't in the same directory (ex. /usr/local/bin) (as is the case for Android's build system), as the GCC_TOOLCHAIN_DIR then gets set based on `which $(LD)` which will point where LLVM tools are, not GCC/binutils tools are located. Instead, select the GCC_TOOLCHAIN_DIR based on another tool provided by binutils for which LLVM does not provide a substitute for, such as elfedit. Fixes: 785f11aa ("kbuild: Add better clang cross build support") Link: https://github.com/ClangBuiltLinux/linux/issues/341Suggested-by: NNathan Chancellor <natechancellor@gmail.com> Reviewed-by: NNathan Chancellor <natechancellor@gmail.com> Tested-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
- 06 4月, 2019 2 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Masahiro Yamada 提交于
[ Upstream commit 9390dff66a52d1a60c6e517d8fa6cdbdffc83cb1 ] If include/config/auto.conf.cmd is lost for some reasons, it is not self-healing, so the top Makefile misses to run syncconfig. Move include/config/auto.conf.cmd to the target side. I used a pattern rule instead of a normal rule here although it is a bit gross. If the rule were written with a normal rule like this, include/config/auto.conf \ include/config/auto.conf.cmd \ include/config/tristate.conf: $(KCONFIG_CONFIG) $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig ... syncconfig would be executed per target. Using a pattern rule makes sure that syncconfig is executed just once because Make assumes the recipe will create all of the targets. Here is a quote from the GNU Make manual [1]: "Pattern rules may have more than one target. Unlike normal rules, this does not act as many different rules with the same prerequisites and recipe. If a pattern rule has multiple targets, make knows that the rule's recipe is responsible for making all of the targets. The recipe is executed only once to make all the targets. When searching for a pattern rule to match a target, the target patterns of a rule other than the one that matches the target in need of a rule are incidental: make worries only about giving a recipe and prerequisites to the file presently in question. However, when this file's recipe is run, the other targets are marked as having been updated themselves." [1]: https://www.gnu.org/software/make/manual/html_node/Pattern-Intro.htmlSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NSasha Levin <sashal@kernel.org>
-