Improve the help() output by adding the single character
tokens (e.g -a).
Signed-off-by: NNathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Sort the command line arguments output of help() in
alphabetical order in line with other linux tools.
Signed-off-by: NNathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Running turbostat on machines that don't expose nodes
in sysfs (no /sys/bus/node) causes a segfault or a -nan
value diesplayed in the log. This is caused by
physical_node_id being reported as -1 and logical_node_id
being calculated as a negative number resulting in the new
GET_THREAD/GET_CORE returning an incorrect address.
Signed-off-by: NNathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Add APIC and X2APIC columns to the topology section.

They are disabled-by-default -- enable like so:
--debug
or
--enable APIC,X2APIC
Signed-off-by: NLen Brown <len.brown@intel.com>

eg. the "HT" here:
CPUID(1): SSE3 MONITOR - EIST TM2 TSC MSR ACPI-TM HT TM
Signed-off-by: NLen Brown <len.brown@intel.com>

The --show and --hide options failed on "Node", which was listed as "Node%".
The --show and --hide options were generally fouled-up do due to come
content merges that scrambled the list of column name indexes.
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

Output a Node column if there is more than one node/socket.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The previous patches have added node information to turbostat, but the
counters code does not take it into account.

Add node information from cpu_topology calculations to turbostat
counters.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Cleanup, remove num_ from num_nodes_per_pkg, num_cores_per_node, and
num_threads_per_node.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

turbostat incorrectly assumes that there is one node per package.  As a
result num_cores_per_pkg is not correctly named and is actually
num_cores_per_node.

Rename num_cores_per_pkg to num_cores_per_node.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The code can be simplified if the cpu_topology *cpus tracks the thread
IDs.  This removes an additional file lookup and simplifies the counter
initialization code.

Add thread ID to cpu_topology information and cleanup the counter
initialization code.

v2: prevent thread_id from being overwritten
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The code currently assumes each package has exactly one node.  This is not
the case for AMD systems and Intel systems with COD.  AMD systems also
may re-enumerate each node's core IDs starting at 0 (for example, an AMD
processor may have two nodes, each with core IDs from 0 to 7).  In order
to properly enumerate the cores we need to track both the physical and
logical node IDs.

Add physical_node_id to track the node ID assigned by the kernel, and
logical_node_id used by turbostat to track the nodes per package ie) a
0-based count within the package.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The turbostat code only looks at thread_siblings_list to determine if
processing units/threads are on the same the core.  This works well on
Intel systems which have a shared L1 instruction and data cache.  This
does not work on AMD systems which have shared L1 instruction cache but
separate L1 data caches.  Other utilities also check sibling's core ID
to determine if the processing unit shares the same core.

Additionally, the cpu_topology *cpus list used in topology_probe() can
be used elsewhere in the code to simplify things.

Export *cpus to the entire turbostat code, and add Processing Unit/Thread
IDs information to each cpu_topology struct.  Confirm that the thread
is on the same core as indicated by thread_siblings_list.

[v2]: Fixup CPU_* usage that caused gcc malloc error.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Future fixes will use sysfs files that contain cpumask output.  The code
needs to know the length of the cpumask in order to determine which cpus
are set in a cpumask.  Currently topo.max_cpu_num is the maximum cpu
number.  It can be increased the the maximum value of cpus represented in
cpumasks.

Set max_num_cpus to the length of a cpumask.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

There's a use case during test to only print specific round of iterations
if --num_iterations is specified, for example, with this patch applied:

turbostat -i 5 -n 4
will capture 4 samples with 5 seconds interval.

[lenb: renamed to --num_iterations from --iterations]
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NChen Yu <yu.c.chen@intel.com>
Reviewed-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

All MSRs related to turbostat are same as Kabylake.
Even though SDM claims that core C3 residency can be read from MSR 0x662,
the read on this MSR fails on CNL platform. Hence disabled C3 MSR read
and display.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The SNB_C1_AUTO_UNDEMOTE definition should have been deleted once
it was copied into msr-index.h.  One copy of the truth is better --
particularly when Matt needs to fix it:-)
Signed-off-by: NLen Brown <len.brown@intel.com>

According to the Intel Software Developers' Manual, Vol. 4, Order No.
335592, these macros have been reversed since they were added.

Fixes: 889facbe ("tools/power turbostat: v3.0: monitor Watts and Temperature")
Signed-off-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Like the "C1" and "C1%" column, the new POLL and POLL% columns
show invocations and residency% during the measurement interval.

While it didn't seem important to track in the past,
we've recently found some Linux cpuidle bugs related to POLL%.
Signed-off-by: NLen Brown <len.brown@intel.com>

The column header for PC10 residency is "Pk%pc10"
This is missing the 'g' that others have, eg Pkg%pc6,
to allow tab-delimited columns to fit into 8-columns.

However, --hide Pk%pc10 did not work, it was still looking for the 'g'.
This was confusing, because --list shows the correct "Pk%pc10"
Reported-by: NWendy Wang <wendy.wang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Linux 4.15 exports the ACPI Low Power Idle Table's
counters in /sys/devices/system/cpu/cpuidle/

low_power_idle_cpu_residency_us

	Show this in the "CPU%LPI" column.

	Today this reflects the "North Complex"
	residency in PC10, so expect it to
	closely follow "Pk%pc10".

low_power_idle_system_residency_us

	Show this in the "SYS%LPI" column.

	Today, this reflects the North is in PC10,
	plus the PCH is sufficiently quiescent
	to save additional power via the "S0ix"
	system state, as measured by the
	PCH SLP_S0 counter.
Signed-off-by: NLen Brown <len.brown@intel.com>

When the user reuests to collect and show columns
that are not present on every row (eg. for every CPU)
turbostat still prints an (empty) line for every CPU.
Update so no blank lines are printed.

old:
	# turbostat --quiet --show Pkg%pc6
	Pkg%pc6
	9.12
	9.12

	Pkg%pc6
	9.12
	9.12

new:
	# turbostat --quiet --show Pkg%pc6
	Pkg%pc6
	9.12
	9.12
	Pkg%pc6
	9.12
	9.12
Reported-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Improve readability a little bit by changing this output:

 MSR_PKG_CST_CONFIG_CONTROL: 0x00008407 (locked: pkg-cstate-limit=7: unlimited, automatic-c-state-conversion=off)

with this output:

 MSR_PKG_CST_CONFIG_CONTROL: 0x00008407 (locked, pkg-cstate-limit=7 (unlimited), automatic-c-state-conversion=off)
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

BDX and SKX have a bit that tells them to PROMOTE shallow
C-states requests to MWAIT(C6).  It is generally a BIOS bug
if this bit is set.  As we have encountered that BIOS bug,
let's print this bit in turbostat debug output.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Some SKX use a 24 MHz crystal, so do not hard code 25 MHz.

Also, SKX crystal is not exact, because SKX uses an EMI reduction
circuit that costs a fraction of a percent.
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

MSR_IA32_MISC_ENABLE[18] is the MWAIT ENABLE bit, not DISABLE bit...

so

MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST No-MWAIT PREFETCH TURBO)

should print as:

MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST MWAIT PREFETCH TURBO)
Signed-off-by: NLen Brown <len.brown@intel.com>

The recent patch that implements table printing on a keypress introduced a
regression - turbostat prints the table almost continuously if it is run from a
daemon program.

The problem is also easy to reproduce like this:

echo | turbostat

The reason is that we cannot assume that stdin is always a TTY. It can be many
things.

This patch adds fixes the problem by limiting the new keypress functionality to
TTYs only. If stdin is not a TTY, we just sleep for the full interval time.

While on it, clean-up 'do_sleep()' to return no value, as callers do not expect
that anyway.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

In turbostat interval mode, a newline typed on standard input
will now conclude the current interval.  Data will immediately
be collected and printed for that interval, and the next interval
will be started.

This is similar to the recently added SIGUSR1 feature.
But that is for use by programs, while this is for interactive use.
Signed-off-by: NLen Brown <len.brown@intel.com>

Interval-mode turbostat now catches and discards SIGUSR1.

Thus, SIGUSR1 can be used to tell turbostat to cut short
the current measurement interval.  Turbostat will then start
the next measurement interval using the regular interval length.

This can be used to give turbostat variable intervals.
Invoke turbostat with --interval LARGE_NUMBER_SEC
and have a program that has permission to send it a SIGUSR1
always before LARGE_NUMBER_SEC expires.

It may also be useful to use "--enable Time_Of_Day_Seconds"
to observe the actual interval length.
Signed-off-by: NLen Brown <len.brown@intel.com>

When running in interval-mode, catch interrupts
and print a final data record before exiting.
Signed-off-by: NLen Brown <len.brown@intel.com>

Add a Time_Of_Day_Seconds column showing when measurement
for each row was completed.  Units are [sec.subsec] since Epoch,
as reported by gettimeofday(2).

While useful to correlate turbostat output with other tools,
this built-in column is disabled, by default.

Add the "--enable" option to enable such disabled-by-default
built-in columns:

"--enable Time_Of_Day_Seconds"
"--enable usec"

"--enable all", will enable all disabled-by-defauilt built-in counters.

When "--debug" is used, all disabled-by-default columns are enabled,
unless explicitly skipped using "--hide"
Signed-off-by: NLen Brown <len.brown@intel.com>

Turbostat neglects to display all package C-states for some Skylake Xeon BIOS configurations.

This is due to a typo in the table decoding MSR_PKG_CST_CONFIG_CONTROL (0x000000e2)

Here we fix that typo, according to Intel SDM, vol 4, Table 2-41 -
"MSRs Supported by Intel® Xeon® Processor Scalable Family with DisplayFamily_DisplayModel 06_55H".
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This reverts commit c91fc851.

That change caused a C6 and PC6 residency regression on large idle systems.

Users also complained about new output indicating jitter:

turbostat: cpu6 jitter 3794 9142
Signed-off-by: NLen Brown <len.brown@intel.com>
Cc: 4.13+ <stable@vger.kernel.org> # v4.13+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

otherwise, turbostat bails on on AMD Opteron boxes:

turbostat: cpu26: msr offset 0x1a0 read failed: Input/output error
Reported-by: NKamil Kolakowski <kkolakow@redhat.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Turbostat has the capability to set its own affinity to
each CPU so that its MSR accesses are on the local CPU.

However, using the in-kernel cross-call in  the msr driver
tends to be less invasive, so do that -- by-default.
'-m' remains to get the old behaviour.
Signed-off-by: NLen Brown <len.brown@intel.com>

The --debug option now pre-pends each row with
the number  of micro-seconds [usec] to collect
the finishing snapshot for that row.
Signed-off-by: NLen Brown <len.brown@intel.com>

Skylake has some new counters, and they were erroneously
exempt  from --show and --hide

eg.

turbostat  --quiet --show CPU
CPU	Totl%C0	Any%C0	GFX%C0	CPUGFX%
-	116.73	90.56	85.69	79.00
0	117.78	91.38	86.47	79.71
2
1
3

is now

CPU
-
0
2
1
3
Signed-off-by: NLen Brown <len.brown@intel.com>