Kernel threads don't call syscalls using the sysenter/sysexit
path. Instead they directly call the sys_* or do_* functions
that implement the syscalls inside the kernel.

The current syscall tracepoints only bind the sysenter/sysexit
path, then it has no effect to trace the kernel thread calls
to syscalls in that path.
Setting the TIF_SYSCALL_TRACEPOINT flag is then useless for these.

Actually there is only one case when a kernel thread can reach the
usual syscall exit tracing path: when we create a kernel thread, the
child comes to ret_from_fork and is the fork() return is then traced.
But this information alone is useless, then we don't want to set the
TIF flags for these threads.

Kernel threads have task_struct->mm set to NULL.
(Thanks to Heiko for that hint ;-)
The idea is then to check the mm field in syscall_regfunc() and
set the flag accordingly.
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
LKML-Reference: <20090825160237.GG4639@cetus.boeblingen.de.ibm.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Most arch syscall_get_nr() implementations returns -1 if the syscall
number is not valid.  Accessing the bit field without a check might
result in a kernel oops (at least I saw it on s390 for ftrace selftest).

Before this change, this problem did not occur, because the invalid
syscall number (-1) caused syscall_nr_to_meta() to return NULL.

There are at least two scenarios where syscall_get_nr() can return -1:

1. For example, ptrace stores an invalid syscall number, and thus,
   tracing code resets it.
   (see do_syscall_trace_enter in arch/s390/kernel/ptrace.c)

2. The syscall_regfunc() (kernel/tracepoint.c) sets the
   TIF_SYSCALL_FTRACE (now: TIF_SYSCALL_TRACEPOINT) flag for all threads
   which include kernel threads.
   However, the ftrace selftest triggers a kernel oops when testing
   syscall trace points:
      - The kernel thread is started as ususal (do_fork()),
      - tracing code sets TIF_SYSCALL_FTRACE,
      - the ret_from_fork() function is triggered and starts
	ftrace_syscall_exit() with an invalid syscall number.

To avoid these scenarios, I suggest to check the syscall_nr.

For instance, the ftrace selftest fails for s390 (with config option
CONFIG_FTRACE_SYSCALLS set) and produces the following kernel oops.

Unable to handle kernel pointer dereference at virtual kernel address 2000000000

Oops: 0038 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 Not tainted 2.6.31-rc6-next-20090819-dirty #18
Process kthreadd (pid: 818, task: 000000003ea207e8, ksp: 000000003e813eb8)
Krnl PSW : 0704100180000000 00000000000ea54c (ftrace_syscall_exit+0x58/0xdc)
           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 EA:3
Krnl GPRS: 0000000000000000 00000000000e0000 ffffffffffffffff 20000000008c2650
           0000000000000007 0000000000000000 0000000000000000 0000000000000000
           0000000000000000 0000000000000000 ffffffffffffffff 000000003e813d78
           000000003e813f58 0000000000505ba8 000000003e813e18 000000003e813d78
Krnl Code: 00000000000ea540: e330d0000008       ag      %r3,0(%r13)
           00000000000ea546: a7480007           lhi     %r4,7
           00000000000ea54a: 1442               nr      %r4,%r2
          >00000000000ea54c: e31030000090       llgc    %r1,0(%r3)
           00000000000ea552: 5410d008           n       %r1,8(%r13)
           00000000000ea556: 8a104000           sra     %r1,0(%r4)
           00000000000ea55a: 5410d00c           n       %r1,12(%r13)
           00000000000ea55e: 1211               ltr     %r1,%r1
Call Trace:
([<0000000000000000>] 0x0)
 [<000000000001fa22>] do_syscall_trace_exit+0x132/0x18c
 [<000000000002d0c4>] sysc_return+0x0/0x8
 [<000000000001c738>] kernel_thread_starter+0x0/0xc
Last Breaking-Event-Address:
 [<00000000000ea51e>] ftrace_syscall_exit+0x2a/0xdc
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
LKML-Reference: <20090825125027.GE4639@cetus.boeblingen.de.ibm.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

This patch includes s390 arch updates to synchronize with latest
core changes in the syscalls tracing area.

- tracing: Map syscall name to number (syscall_name_to_nr())
- tracing: Call arch_init_ftrace_syscalls at boot
- tracing: add support tracepoint ids (set_syscall_{enter,exit}_id())
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
LKML-Reference: <20090825123111.GD4639@cetus.boeblingen.de.ibm.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Merge branch 'tracing/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into tracing/core

Conflicts:
	include/linux/tracepoint.h
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The commit:
  commit 5ac35daa
  Author: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
  tracing/events: fix the include file dependencies

Moved the TRACE_EVENT out of the ifdef protection of tracepoints.h
but uses the define of TRACE_EVENT itself as protection. This patch
adds comments to explain why.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The TRACE_EVENT depends on the include/linux/tracepoint.h first
and include/trace/ftrace.h later, if we include the ftrace.h early,
a building error will occur.

Both define TRACE_EVENT in trace_a.h and trace_b.h, if we include
those in .c file, like this:

#define CREATE_TRACE_POINTS
include <trace/events/trace_a.h>
include <trace/events/trace_b.h>

The above will not work, because the TRACE_EVENT was re-defined by
the previous .h file.
Reported-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
LKML-Reference: <4A937F5E.3020802@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There are many clock sources for the tracing system but we can only
enable/disable one at a time with the trace/options file.
We can move the setting of clock-source out of options and add a separate
file for it:
 # cat trace_clock
 [local] global
 # echo global > trace_clock
 # cat trace_clock
 local [global]
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
LKML-Reference: <4A939D08.6050604@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Usually, char * entries are dangerous in traces because the string
can be released whereas a pointer to it can still wait to be read from
the ring buffer.

But sometimes we can assume it's safe, like in case of RO data
(eg: __file__ or __line__, used in bkl trace event). If these RO data
are in a module and so is the call to the trace event, then it's safe,
because the ring buffer will be flushed once this module get unloaded.

To allow char * to be treated as a string:

	TRACE_EVENT(...,

		TP_STRUCT__entry(
			__field_ext(const char *, name, FILTER_PTR_STRING)
			...
		)

		...
	);

The filtering will not dereference "char *" unless the developer
explicitly sets FILTER_PTR_STR in __field_ext.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A7B9287.90205@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add __field_ext(), so a field can be assigned to a specific
filter_type, which matches a corresponding filter function.

For example, a later patch will allow this:
	__field_ext(const char *, str, FILTER_PTR_STR);
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A7B9272.60507095@cn.fujitsu.com>

[
  Fixed a -1 to FILTER_OTHER
  Forward ported to latest kernel.
]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The type of a field is stored as a string in @type, and here
we add @filter_type which is an enum value.

This prepares for later patches, so we can specifically assign
different @filter_type for the same @type.

For example normally a "char *" field is treated as a ptr,
but we may want it to be treated as a string when doing filting.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A7B925E.9030605@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

function_graph traces look like nested function calls, complete with
braces denoting the start and end of functions.  function-graph-fold.vim
teaches vim how to fold these functions, to make it more convenient to
browse them.

To use, :source function-graph-fold.vim while viewing a function_graph
trace, or use "view -S function-graph-fold.vim some-trace" to load it
from the command-line together with a trace.  You can then use the usual
vim fold commands, such as "za", to open and close nested functions.
While closed, a fold will show the total time taken for a call, as would
normally appear on the line with the closing brace.  Folded functions
will not include finish_task_switch(), so folding should remain
relatively sane even through a context switch.

Note that this will almost certainly only work well with a single-CPU
trace (e.g. trace-cmd report --cpu 1).  It also takes some time to run
(a few seconds for a large trace on my laptop).  Nevertheless, I found
it very handy to get an overview of a trace and then drill down on
problematic calls.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
LKML-Reference: <20090806145701.GB7661@feather>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

While debugging the scheduler push / pull algorithm, I found
it very annoying that the sched wake up events did not show
the CPU that the task was waking on. In order to analyze the
scheduler, I needed that information.

This patch adds recording of the CPU that a task is waking up
on.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This converts the syscall_enter/exit tracepoints into TRACE_EVENTs, so
you can have generic ftrace events that capture all system calls with
arguments and return values.  These generic events are also renamed to
sys_enter/exit, so they're more closely aligned to the specific
sys_enter_foo events.
Signed-off-by: NJosh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <1251150194-1713-5-git-send-email-jistone@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

It's not strictly correct for the tracepoint reg/unreg callbacks to
occur when a client is hooking up, because the actual tracepoint may not
be present yet.  This happens to be fine for syscall, since that's in
the core kernel, but it would cause problems for tracepoints defined in
a module that hasn't been loaded yet.  It also means the reg/unreg has
to be EXPORTed for any modules to use the tracepoint (as in SystemTap).

This patch removes DECLARE_TRACE_WITH_CALLBACK, and instead introduces
DEFINE_TRACE_FN which stores the callbacks in struct tracepoint.  The
callbacks are used now when the active state of the tracepoint changes
in set_tracepoint & disable_tracepoint.

This also introduces TRACE_EVENT_FN, so ftrace events can also provide
registration callbacks if needed.
Signed-off-by: NJosh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <1251150194-1713-4-git-send-email-jistone@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The syscall enter/exit tracepoints are only supported on archs that
HAVE_SYSCALL_TRACEPOINTS, so the declarations should be #ifdef'ed.
Also, the definition of syscall_regfunc and syscall_unregfunc should
depend on this same config, rather than the ftrace-specific one.
Signed-off-by: NJosh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1251150194-1713-3-git-send-email-jistone@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

s/HAVE_FTRACE_SYSCALLS/HAVE_SYSCALL_TRACEPOINTS/g
s/TIF_SYSCALL_FTRACE/TIF_SYSCALL_TRACEPOINT/g

The syscall enter/exit tracing is no longer specific to just ftrace, so
they now have names that reflect their tie to tracepoints instead.
Signed-off-by: NJosh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <1251150194-1713-2-git-send-email-jistone@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Signed-off-by: NAnirban Sinha <asinha@zeugmasystems.com>
Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: "Oleg Nesterov" <oleg@tv-sign.ru>
LKML-Reference: <DDFD17CC94A9BD49A82147DDF7D545C501EA9047@exchange.ZeugmaSystems.local>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Before:

  # echo 1 > events/syscalls/sys_enter_sync/enable
  # cat events/syscalls/sys_enter_sync/format
  ...
        field:int nr;   offset:12;      size:4;

  print fmt: "# sync
  # cat trace
  ...
            sync-8950  [000]  2366.087670: sys_sync(

After:

  # echo 1 > events/syscalls/sys_enter_sync/enable
  # cat events/syscalls/sys_enter_sync/format
  ...
        field:int nr;   offset:12;      size:4;

  print fmt: ""
  # sync
  # cat trace
            sync-2134  [001]   136.780735: sys_sync()
Reported-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <4A8D05AF.20103@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add filtering support for syscall events:

 # echo 'mode == 0666' > events/syscalls/sys_enter_open
 # echo 'ret == 0' > events/syscalls/sys_exit_open
 # echo 1 > events/syscalls/sys_enter_open
 # echo 1 > events/syscalls/sys_exit_open
 # cat trace
 ...
   modprobe-3084 [001] 117.463140: sys_open(filename: 917d3e8, flags: 0, mode: 1b6)
   modprobe-3084 [001] 117.463176: sys_open -> 0x0
       less-3086 [001] 117.510455: sys_open(filename: 9c6bdb8, flags: 8000, mode: 1b6)
   sendmail-2574 [001] 122.145840: sys_open(filename: b807a365, flags: 0, mode: 1b6)
 ...
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A8BAFCB.1040006@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Extract duplicate code. Also prepare for the later patch.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A8BAFB8.1010304@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This parameter is needed by syscall events to add define_fields()
handler.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A8BAF90.6060801@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add "format" file for syscall exit events:

 # cat events/syscalls/sys_exit_open/format
 name: sys_exit_open
 ID: 344
 format:
         field:unsigned short common_type;       offset:0;       size:2;
         field:unsigned char common_flags;       offset:2;       size:1;
         field:unsigned char common_preempt_count;       offset:3;       size:1;
         field:int common_pid;   offset:4;       size:4;
         field:int common_tgid;  offset:8;       size:4;

         field:int nr;   offset:12;      size:4;
         field:unsigned long ret;        offset:16;      size:4;
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A8BAF61.3060307@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The "format" file of a trace event is originally for parsers to
parse ftrace binary output.

But the "format" file of a syscall event can only be used by
perfcounter, because it describes the format of struct
syscall_enter_record not struct syscall_trace_enter.

To fix this, we remove struct syscall_enter_record, and then
struct syscall_trace_enter will be used by both perf profile
and ftrace.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A8BAF39.1030404@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Commit fb34a08c ("tracing: Add trace events for each syscall
entry/exit") changed the lowlevel API to ftrace syscall tracing
but did not update s390 which started making use of it recently.

This broke the s390 build, as reported by Paul Mundt.

Update the callbacks with the syscall number and the syscall
return code values. This allows per syscall tracepoints,
syscall argument enumeration /debug/tracing/events/syscalls/
and perfcounters support and integration on s390 too.
Reported-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <tip-fb34a08c@git.kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use seq_release_private().
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A891AAB.8090701@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Extract duplicate code in t_start() and t_next().
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A891A91.4030602@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

One entry is missing in the output of a stat file.

The cause is, when stat_seq_start() is called the 2nd time, we
should start from the (pos-1)th elem in the rbtree but not pos,
because pos == 0 is the header.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A891A65.70009@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When syscall tracing was implemented as a tracer,
"syscall_arg_type" trace option could be set to enable the
display of syscall parameter types.

Now this option is gone since it's no longer a tracer, but the
code is still there but dead.

So we remove dead code and re-enable the printing of paramete
types via the verbose option:

  # echo verbose > trace_options
  # echo syscalls > set_event
  # cat trace
	...
        bash-3331  [000]    95.348937: sys_fcntl64 -> 0x1
        bash-3331  [000]    95.348942: sys_close(unsigned int fd: a)
	...
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <4A891AF6.5050102@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add trace points to trace module_load, module_free, module_get,
module_put and module_request, and use trace_event facility to
get the trace output.

Here's the sample output:

     TASK-PID    CPU#    TIMESTAMP  FUNCTION
        | |       |          |         |
    <...>-42    [000]     1.758380: module_request: fb0 wait=1 call_site=fb_open
    ...
    <...>-60    [000]     3.269403: module_load: scsi_wait_scan
    <...>-60    [000]     3.269432: module_put: scsi_wait_scan call_site=sys_init_module refcnt=0
    <...>-61    [001]     3.273168: module_free: scsi_wait_scan
    ...
    <...>-1021  [000]    13.836081: module_load: sunrpc
    <...>-1021  [000]    13.840589: module_put: sunrpc call_site=sys_init_module refcnt=-1
    <...>-1027  [000]    13.848098: module_get: sunrpc call_site=try_module_get refcnt=0
    <...>-1027  [000]    13.848308: module_get: sunrpc call_site=get_filesystem refcnt=1
    <...>-1027  [000]    13.848692: module_put: sunrpc call_site=put_filesystem refcnt=0
    ...
 modprobe-2587  [001]  1088.437213: module_load: trace_events_sample F
 modprobe-2587  [001]  1088.437786: module_put: trace_events_sample call_site=sys_init_module refcnt=0

Note:

- the taints flag can be 'F', 'C' and/or 'P' if mod->taints != 0

- the module refcnt is percpu, so it can be negative in a
  specific cpu
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <4A891B3C.5030608@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The new syscall_regfunc()/unregfunc() functions rely on
the existence of TIF_SYSCALL_FTRACE - but that TIF flag
is only offered by HAVE_FTRACE_SYSCALLS.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This bring the support for raw syscall events in perfcounters.
The arguments or exit value are saved as a raw sample using
the PERF_SAMPLE_RAW attribute in a perf counter.

Example (for now you must explicitly set the PERF_SAMPLE_RAW flag
in perf record):

perf record -e syscalls:sys_enter_open -f -F 1 -a
perf report -D

	0x2cbb8 [0x50]: event: 9
	.
	. ... raw event: size 80 bytes
	.  0000:  09 00 00 00 02 00 50 00 20 e9 39 ab 0a 7f 00 00  ......P. .9....
	.  0010:  bc 14 00 00 bc 14 00 00 01 00 00 00 00 00 00 00  ...............
	.  0020:  2c 00 00 00 15 01 01 00 bc 14 00 00 bc 14 00 00  ,..............
                  ^  ^  ^  ^  ^  ^  ^  ..........................
                  Event Size  struct trace_entry

	.  0030:  00 00 00 00 46 98 43 02 00 00 00 00 80 08 00 00  ....F.C........
                  ^  ^  ^  ^  ^  ^  ^  ^  ^  ^  ^  ^  ^  ^  ^  ^
                  ptr to file name        open flags

	.  0040:  00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00  ...............
                  ^  ^  ^  ^  ^  ^  ^  ^  ^  ^  ^  ^  ^  ^  ^  ^
	.         open mode               padding

	0x2cbb8 [0x50]: PERF_EVENT_SAMPLE (IP, 2): 5308: 0x7f0aab39e920 period: 1
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>

Define the format of the syscall trace fields to parse the binary
values from a raw trace using the syscall events "format" file.

This is defined dynamically using the syscalls metadata.
It prepares the export of syscall event raw records to perf
counters.

Example:

$ cat /debug/tracing/events/syscalls/sys_enter_sched_getparam/format
name: sys_enter_sched_getparam
ID: 39
format:
	field:unsigned short common_type;	offset:0;	size:2;
	field:unsigned char common_flags;	offset:2;	size:1;
	field:unsigned char common_preempt_count;	offset:3;	size:1;
	field:int common_pid;	offset:4;	size:4;
	field:int common_tgid;	offset:8;	size:4;

	field:pid_t pid;	offset:12;	size:8;
	field:struct sched_param * param;	offset:20;	size:8;

print fmt: "pid: 0x%08lx, param: 0x%08lx", ((unsigned long)(REC->pid)), ((unsigned long)(REC->param))
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>

Add the struct ftrace_event_call as a parameter of its show_format()
callback. This way we can use it from the syscall trace events to
retrieve the syscall name from the ftrace event call parameter and
describe its fields using the syscalls metadata.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>

A number of syscalls are not using 'DEFINE_SYSCALL'. I'm not sure why.
Convert x86_64 uname and mmap to use DEFINE_SYSCALL.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The new syscall tracepoints names can be too long for the 'perf list'
output.
Add a few more characters.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The perf counter support is automated for usual trace events. But we
have to define specific callbacks for this to handle syscalls trace
events

Make 'perf stat -e syscalls:sys_enter_blah' work with syscall style
tracepoints.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The current state of syscalls tracepoints generates only one event id
for every syscall events.

This patch associates an id with each syscall trace event, so that we
can identify each syscall trace event using the 'perf' tool.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Layer Frederic's syscall tracer on tracepoints. We create trace events
via hooking into the SYSCALL_DEFINE macros. This allows us to
individually toggle syscall entry and exit points on/off.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

add an optional void * pointer to 'ftrace_event_call' that is
passed in for regfunc and unregfunc.

This prepares for syscall tracepoints creation by passing the name of
the syscall we want to trace and then retrieve its number through our
arch syscall table.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Allow the return value of raw_init() trace event callback to bail us out
of creating a trace event file, in case we fail to register our
event.

Also, we plan to return -ENOSYS for syscall events that don't match any
syscalls listed in our arch tracing syscall table, we don't want to warn
in that case, we just want this event to be invisible in debugfs and
ignored.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>