To make it clear that it may be called from contexts that may not have
any knowledge of L2CAP, we change the connection parameter, to receive
a hci_conn.

This also makes it clear that it is checking the security of the link.
Signed-off-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

If SMP fails, we should always cancel security_timer delayed work.
Otherwise, security_timer function may run after l2cap_conn object
has been freed.

This patch fixes the following warning reported by ODEBUG:

WARNING: at lib/debugobjects.c:261 debug_print_object+0x7c/0x8d()
Hardware name: Bochs
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x27
Modules linked in: btusb bluetooth
Pid: 440, comm: kworker/u:2 Not tainted 3.5.0-rc1+ #4
Call Trace:
 [<ffffffff81174600>] ? free_obj_work+0x4a/0x7f
 [<ffffffff81023eb8>] warn_slowpath_common+0x7e/0x97
 [<ffffffff81023f65>] warn_slowpath_fmt+0x41/0x43
 [<ffffffff811746b1>] debug_print_object+0x7c/0x8d
 [<ffffffff810394f0>] ? __queue_work+0x241/0x241
 [<ffffffff81174fdd>] debug_check_no_obj_freed+0x92/0x159
 [<ffffffff810ac08e>] slab_free_hook+0x6f/0x77
 [<ffffffffa0019145>] ? l2cap_conn_del+0x148/0x157 [bluetooth]
 [<ffffffff810ae408>] kfree+0x59/0xac
 [<ffffffffa0019145>] l2cap_conn_del+0x148/0x157 [bluetooth]
 [<ffffffffa001b9a2>] l2cap_recv_frame+0xa77/0xfa4 [bluetooth]
 [<ffffffff810592f9>] ? trace_hardirqs_on_caller+0x112/0x1ad
 [<ffffffffa001c86c>] l2cap_recv_acldata+0xe2/0x264 [bluetooth]
 [<ffffffffa0002b2f>] hci_rx_work+0x235/0x33c [bluetooth]
 [<ffffffff81038dc3>] ? process_one_work+0x126/0x2fe
 [<ffffffff81038e22>] process_one_work+0x185/0x2fe
 [<ffffffff81038dc3>] ? process_one_work+0x126/0x2fe
 [<ffffffff81059f2e>] ? lock_acquired+0x1b5/0x1cf
 [<ffffffffa00028fa>] ? le_scan_work+0x11d/0x11d [bluetooth]
 [<ffffffff81036fb6>] ? spin_lock_irq+0x9/0xb
 [<ffffffff81039209>] worker_thread+0xcf/0x175
 [<ffffffff8103913a>] ? rescuer_thread+0x175/0x175
 [<ffffffff8103cfe0>] kthread+0x95/0x9d
 [<ffffffff812c5054>] kernel_threadi_helper+0x4/0x10
 [<ffffffff812c36b0>] ? retint_restore_args+0x13/0x13
 [<ffffffff8103cf4b>] ? flush_kthread_worker+0xdb/0xdb
 [<ffffffff812c5050>] ? gs_change+0x13/0x13

This bug can be reproduced using hctool lecc or l2test tools and
bluetoothd not running.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

If l2cap_chan_create() fails then it will return from l2cap_sock_kill
since zapped flag of sk is reset.
Signed-off-by: NJaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

smp_chan_create might return NULL so we need to check before
dereferencing smp.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

When the name of the given entry is empty , the state needs to be
updated accordingly.

Cc: stable@vger.kernel.org
Signed-off-by: NRam Malovany <ramm@ti.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

If the device was not found in a list of found devices names of which
are pending.This may happen in a case when HCI Remote Name Request
was sent as a part of incoming connection establishment procedure.
Hence there is no need to continue resolving a next name as it will
be done upon receiving another Remote Name Request Complete Event.
This will fix a kernel crash when trying to use this entry to resolve
the next name.

Cc: stable@vger.kernel.org
Signed-off-by: NRam Malovany <ramm@ti.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

If entry wasn't found in the hci_inquiry_cache_lookup_resolve do not
resolve the name.This will fix a kernel crash when trying to use NULL
pointer.

Cc: stable@vger.kernel.org
Signed-off-by: NRam Malovany <ramm@ti.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Some devices e.g. some Android based phones don't do SDP search before
pairing and cancel legacy pairing when ACL is disconnected.

PIN Code Request event which changes ACL timeout to HCI_PAIRING_TIMEOUT
is only received after remote user entered PIN.

In that case no L2CAP is connected so default HCI_DISCONN_TIMEOUT
(2 seconds) is being used to timeout ACL connection. This results in
problems with legacy pairing as remote user has only few seconds to
enter PIN before ACL is disconnected.

Increase disconnect timeout for incomming connection to
HCI_PAIRING_TIMEOUT if SSP is disabled and no linkey exists.

To avoid keeping ACL alive for too long after SDP search set ACL
timeout back to HCI_DISCONN_TIMEOUT when L2CAP is connected.

2012-07-19 13:24:43.413521 < HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:02:72:D6:6A:3F ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2012-07-19 13:24:43.425224 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
2012-07-19 13:24:43.885222 > HCI Event: Role Change (0x12) plen 8
    status 0x00 bdaddr 00:02:72:D6:6A:3F role 0x01
    Role: Slave
2012-07-19 13:24:44.054221 > HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 42 bdaddr 00:02:72:D6:6A:3F type ACL encrypt 0x00
2012-07-19 13:24:44.054313 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
    handle 42
2012-07-19 13:24:44.055176 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
    bdaddr 00:02:72:D6:6A:3F mode 0
2012-07-19 13:24:44.056217 > HCI Event: Max Slots Change (0x1b) plen 3
    handle 42 slots 5
2012-07-19 13:24:44.059218 > HCI Event: Command Status (0x0f) plen 4
    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
2012-07-19 13:24:44.062192 > HCI Event: Command Status (0x0f) plen 4
    Unknown (0x00|0x0000) status 0x00 ncmd 1
2012-07-19 13:24:44.067219 > HCI Event: Read Remote Supported Features (0x0b) plen 11
    status 0x00 handle 42
    Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
2012-07-19 13:24:44.067248 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
    handle 42 page 1
2012-07-19 13:24:44.071217 > HCI Event: Command Status (0x0f) plen 4
    Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
2012-07-19 13:24:44.076218 > HCI Event: Read Remote Extended Features (0x23) plen 13
    status 0x00 handle 42 page 1 max 1
    Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
2012-07-19 13:24:44.076249 < HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr 00:02:72:D6:6A:3F mode 2 clkoffset 0x0000
2012-07-19 13:24:44.081218 > HCI Event: Command Status (0x0f) plen 4
    Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
2012-07-19 13:24:44.105214 > HCI Event: Remote Name Req Complete (0x07) plen 255
    status 0x00 bdaddr 00:02:72:D6:6A:3F name 'uw000951-0'
2012-07-19 13:24:44.105284 < HCI Command: Authentication Requested (0x01|0x0011) plen 2
    handle 42
2012-07-19 13:24:44.111207 > HCI Event: Command Status (0x0f) plen 4
    Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
2012-07-19 13:24:44.112220 > HCI Event: Link Key Request (0x17) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.112249 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.115215 > HCI Event: Command Complete (0x0e) plen 10
    Link Key Request Negative Reply (0x01|0x000c) ncmd 1
    status 0x00 bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.116215 > HCI Event: PIN Code Request (0x16) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:48.099184 > HCI Event: Auth Complete (0x06) plen 3
    status 0x13 handle 42
    Error: Remote User Terminated Connection
2012-07-19 13:24:48.179182 > HCI Event: Disconn Complete (0x05) plen 4
    status 0x00 handle 42 reason 0x13
    Reason: Remote User Terminated Connection

Cc: stable@vger.kernel.org
Signed-off-by: NSzymon Janc <szymon.janc@tieto.com>
Acked-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

sco_chan_del() only has conn != NULL when called from sco_conn_del() so
just move the code from it that deal with conn to sco_conn_del().

[  120.765529]
[  120.765529] ======================================================
[  120.766529] [ INFO: possible circular locking dependency detected ]
[  120.766529] 3.5.0-rc1-10292-g3701f944-dirty #70 Tainted: G        W
[  120.766529] -------------------------------------------------------
[  120.766529] kworker/u:3/1497 is trying to acquire lock:
[  120.766529]  (&(&conn->lock)->rlock#2){+.+...}, at:
[<ffffffffa00b7ecc>] sco_chan_del+0x4c/0x170 [bluetooth]
[  120.766529]
[  120.766529] but task is already holding lock:
[  120.766529]  (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}, at:
[<ffffffffa00b8401>] sco_conn_del+0x61/0xe0 [bluetooth]
[  120.766529]
[  120.766529] which lock already depends on the new lock.
[  120.766529]
[  120.766529]
[  120.766529] the existing dependency chain (in reverse order) is:
[  120.766529]
[  120.766529] -> #1 (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}:
[  120.766529]        [<ffffffff8107980e>] lock_acquire+0x8e/0xb0
[  120.766529]        [<ffffffff813c19e0>] _raw_spin_lock+0x40/0x80
[  120.766529]        [<ffffffffa00b85e9>] sco_connect_cfm+0x79/0x300
[bluetooth]
[  120.766529]        [<ffffffffa0094b13>]
hci_sync_conn_complete_evt.isra.90+0x343/0x400 [bluetooth]
[  120.766529]        [<ffffffffa009d447>] hci_event_packet+0x317/0xfb0
[bluetooth]
[  120.766529]        [<ffffffffa008aa68>] hci_rx_work+0x2c8/0x890
[bluetooth]
[  120.766529]        [<ffffffff81047db7>] process_one_work+0x197/0x460
[  120.766529]        [<ffffffff810489d6>] worker_thread+0x126/0x2d0
[  120.766529]        [<ffffffff8104ee4d>] kthread+0x9d/0xb0
[  120.766529]        [<ffffffff813c4294>] kernel_thread_helper+0x4/0x10
[  120.766529]
[  120.766529] -> #0 (&(&conn->lock)->rlock#2){+.+...}:
[  120.766529]        [<ffffffff81078a8a>] __lock_acquire+0x154a/0x1d30
[  120.766529]        [<ffffffff8107980e>] lock_acquire+0x8e/0xb0
[  120.766529]        [<ffffffff813c19e0>] _raw_spin_lock+0x40/0x80
[  120.766529]        [<ffffffffa00b7ecc>] sco_chan_del+0x4c/0x170
[bluetooth]
[  120.766529]        [<ffffffffa00b8414>] sco_conn_del+0x74/0xe0
[bluetooth]
[  120.766529]        [<ffffffffa00b88a2>] sco_disconn_cfm+0x32/0x60
[bluetooth]
[  120.766529]        [<ffffffffa0093a82>]
hci_disconn_complete_evt.isra.53+0x242/0x390 [bluetooth]
[  120.766529]        [<ffffffffa009d747>] hci_event_packet+0x617/0xfb0
[bluetooth]
[  120.766529]        [<ffffffffa008aa68>] hci_rx_work+0x2c8/0x890
[bluetooth]
[  120.766529]        [<ffffffff81047db7>] process_one_work+0x197/0x460
[  120.766529]        [<ffffffff810489d6>] worker_thread+0x126/0x2d0
[  120.766529]        [<ffffffff8104ee4d>] kthread+0x9d/0xb0
[  120.766529]        [<ffffffff813c4294>] kernel_thread_helper+0x4/0x10
[  120.766529]
[  120.766529] other info that might help us debug this:
[  120.766529]
[  120.766529]  Possible unsafe locking scenario:
[  120.766529]
[  120.766529]        CPU0                    CPU1
[  120.766529]        ----                    ----
[  120.766529]   lock(slock-AF_BLUETOOTH-BTPROTO_SCO);
[  120.766529]
lock(&(&conn->lock)->rlock#2);
[  120.766529]
lock(slock-AF_BLUETOOTH-BTPROTO_SCO);
[  120.766529]   lock(&(&conn->lock)->rlock#2);
[  120.766529]
[  120.766529]  *** DEADLOCK ***
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch is based on a user space (hciops) patch which never made it
upstream but does make sense to include in the mgmt part of the kernel.

(User space) commit message from Dmitriy Paliy:
"
Page scan interval in fast connectable mode is changed from 22.5 msec to
160 msec to perform less aggressive page scanning. This is done
accordingly to controller vendor recommendation.

Primary concern is that current parameters 22.5 interval, 11.25 window,
and interleaved scanning occupy whole radio bandwidth. Changing interval
to 160 msec should be sufficient for both speeding up connection
establishment and leaving space for other activities, like inquiry scan,
e.g.
"
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This change addresses an L2CAP ERTM throughput problem when a remote
device does not fully utilize the available transmit window.

The L2CAP ERTM transmit window size determines the maximum number of
unacked frames that may be outstanding at any time. It is configured
separately for each direction of an ERTM connection. Each side sends a
configuration request with a tx_win field indicating how many unacked
frames it is capable of receiving before sending an ack. The
configuration response's tx_win field shows how many frames the
transmitter will actually send before waiting for an ack.

It's important to trace both the actual transmit window (to check for
validity of incoming frames) and the number of frames that the
transmitter will send before waiting (to send acks at the appropriate
time). Now there are separate tx_win and ack_win values. ack_win is
updated based on configuration responses, and is used to determine
when acks are sent.
Signed-off-by: NMat Martineau <mathewm@codeaurora.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Improve debug output.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

To help debugging printed hex object use standard bluetooth
specifiers in hci_event. The patch changes format from 0x%04x to 0x%4.4x;
print manufacturer id and handle in hex instead of int; print opcode
always in 0x%4.4x format; status in 0x%2.2x.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Correct places where CID and PSM were printed as int. For CID: 0x%4.4x
is used and for PSM: 0x%2.2x.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Avoid unneeded type conversion by correcting type specifiers in debug
statements for L2CAP.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Reuse user_pairing_resp() to send PIN code negative reply
Signed-off-by: NJaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Since AMP controller is not managed by user space do not shut it down.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

If AMP controller is first in the list then Bluetooth traffic might
be routed through it (if source is not specified). The patch
prevents this case and also checks that source is BR/EDR.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Improve debugging of hci_conn objects by: adding print to hci_conn
refcounting, adding object spcifier when missing, change conn to hcon
since conn is heavily used for l2cap_conn objects and this is misleading.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

The generic HID driver is obviously not a special driver, so move it
outside of the special drivers menu. Explain the usage and make the
default follow the HID setting. This should simplify migration from
older kernels. While at it, remove the redundant HID_SUPPORT option
and modify the HID and USB_HID entries to better explain the bus
structure.
Reported-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

cmd_status, cmd_complete and mgmt_event functions are executed in
process context and they are not called inside atomic sections. Thus,
they should use GFP_KERNEL for memory allocation instead of GFP_ATOMIC.
Signed-off-by: NAndre Guedes <aguedespe@gmail.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

We are allowed to sleep in mgmt_pending_add, so we should use
GFP_KERNEL for memory allocations instead of GFP_ATOMIC.
Signed-off-by: NAndre Guedes <aguedespe@gmail.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

add_uuid and get_connections mgmt_handlers are executed by user
threads running in kernel-mode.
Signed-off-by: NAndre Guedes <aguedespe@gmail.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Move AUTO_OFF_TIMEOUT to other constants changing name to
HCI_AUTO_OFF_TIMEOUT and convert to jiffies.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Commit af7985bf introduced regression
resulting in complie warnings:

...
net/bluetooth/mgmt.c:3568:27: warning: invalid assignment: |=
net/bluetooth/mgmt.c:3568:27:    left side has type restricted __le32
net/bluetooth/mgmt.c:3568:27:    right side has type int
net/bluetooth/mgmt.c:3570:27: warning: invalid assignment: |=
net/bluetooth/mgmt.c:3570:27:    left side has type restricted __le32
net/bluetooth/mgmt.c:3570:27:    right side has type int
net/bluetooth/mgmt.c:3580:21: warning: cast from restricted __le32
...
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

HCI_Disconnect should only be sent after connection is established.
If connection is not yet established and HCI_Disconnect is called
then disconnection complete will be received with a handle which
does not exist and hence this event will be ignored.
But as mgmt.c will not receive this event, its variable for pending
command is not cleared.This will result in future Disconnect commands
for that BD Address to be blocked with error busy.
Signed-off-by: NVishal Agarwal <vishal.agarwal@stericsson.com>
Acked-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch replaces the magic value of variable 'reason' by the
proper macro.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Change flags field to matches userspace structure.
This field needs to be converted to little endian before forward it.
Signed-off-by: NJefferson Delfes <jefferson.delfes@openbossa.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Move reset function to common initialization section fixing
not setting HCI_RESET flag for amp_init.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Some functions print u16 objects as "0xc03" others as "0x0c03". Patch
ensures that opcodes printed are the in the same format and consistent
with bluetooth code.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Sometimes HCI command sending timeouts and gives error message without
specifying which command causes error. Patch makes sure that opcode
is printed to help debugging.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

The HCI constants are always used in form of jiffies. So just
include the conversion from msecs in the define itself. This has the
advantage of making the code where the timeout is used more readable
and avoiding unnecessary conversions.

The patch is similar to commit ba13ccd9 doing the same job for L2CAP
Reported-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Remove magic and use standard HCI cmd timeout
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

If remote device sends bogus RFC option with invalid length,
undefined options values are used. Fix this by using defaults when
remote misbehaves.

This also fixes the following warning reported by gcc 4.7.0:

net/bluetooth/l2cap_core.c: In function 'l2cap_config_rsp':
net/bluetooth/l2cap_core.c:3302:13: warning: 'rfc.max_pdu_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.max_pdu_size' was declared here
net/bluetooth/l2cap_core.c:3298:25: warning: 'rfc.monitor_timeout' may be used uninitialized in this function [-Wmaybe-uninitialized]
net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.monitor_timeout' was declared here
net/bluetooth/l2cap_core.c:3297:25: warning: 'rfc.retrans_timeout' may be used uninitialized in this function [-Wmaybe-uninitialized]
net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.retrans_timeout' was declared here
net/bluetooth/l2cap_core.c:3295:2: warning: 'rfc.mode' may be used uninitialized in this function [-Wmaybe-uninitialized]
net/bluetooth/l2cap_core.c:3266:24: note: 'rfc.mode' was declared here
Signed-off-by: NSzymon Janc <szymon.janc@tieto.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

Follow the net rules.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

With LE/SMP the completion of a security level elavation from medium to
high is indicated by a HCI Encryption Key Refresh Complete event. The
necessary behavior upon receiving this event is a mix of what's done for
auth_complete and encryption_change, which is also where most of the
event handling code has been copied from.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

If we have an unauthenticated key it is not sufficient to acheive high
security. Therefore, when deciding whether to encrypt the link or
request pairing, it is essential to in addition to checking the
existence of a key to also check whether it is authenticated or not.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

The l2cap_conn_del function tries to cancel_sync the security timer, but
when it's called from the timeout function itself a deadlock occurs.
Subsequently the "hcon->l2cap_data = NULL" that's supposed to protect
multiple calls to l2cap_conn_del never gets cleared and when the
connection finally drops we double free's etc which will crash the
kernel.

This patch fixes the issue by using the HCI_CONN_LE_SMP_PEND for
protecting against this. The same flag is also used for the same purpose
in other places in the SMP code.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>