In response to "usbip detach -p [port_number]" user command,vhci_shutdown_connection() gets
executed which kills tcp_tx,tcp_rx kernel threads but doesn't set thread pointers to NULL.
so, at the time of vhci_hcd removal vhci_shutdown_connection() again tries to kill kernel
threads which are already killed.

[  312.220259] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  312.220313] IP: [<ffffffff8108186f>] exit_creds+0x1f/0x70
[  312.220349] PGD 5b7be067 PUD 5b7dc067 PMD 0
[  312.220388] Oops: 0000 [#1] SMP
[  312.220415] Modules linked in: vhci_hcd(O-) usbip_host(O) usbip_core(O) uas usb_storage joydev parport_pc bnep rfcomm ppdev binfmt_misc
snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi arc4 snd_rawmidi snd_seq_midi_event snd_seq
ath9k mac80211 ath9k_common ath9k_hw snd_timer snd_seq_device snd ath i915 drm_kms_helper drm psmouse cfg80211 coretemp soundcore lpc_ich i2c_algo_bit
snd_page_alloc video intel_ips wmi btusb mac_hid bluetooth ideapad_laptop lp sparse_keymap serio_raw mei microcode parport r8169
[  312.220862] CPU 0
[  312.220882] Pid: 2095, comm: usbip_eh Tainted: G           O 3.6.0-rc3+ #2 LENOVO 20042                           /Base Board Product Name
[  312.220938] RIP: 0010:[<ffffffff8108186f>]  [<ffffffff8108186f>] exit_creds+0x1f/0x70
[  312.220979] RSP: 0018:ffff88004d6ebdb0  EFLAGS: 00010282
[  312.221008] RAX: 0000000000000000 RBX: ffff880041c4db40 RCX: ffff88005ad52230
[  312.221041] RDX: 0000000000000034 RSI: 0000000000000286 RDI: 0000000000000000
[  312.221074] RBP: ffff88004d6ebdc0 R08: ffff88004d6ea000 R09: 0000000000000000
[  312.221107] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
[  312.221144] R13: 0000000000000000 R14: ffff88005ad521d8 R15: ffff88004d6ebea0
[  312.221177] FS:  0000000000000000(0000) GS:ffff880077400000(0000) knlGS:0000000000000000
[  312.221214] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  312.221241] CR2: 0000000000000000 CR3: 000000005b7b9000 CR4: 00000000000007f0
[  312.221277] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  312.221309] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  312.221342] Process usbip_eh (pid: 2095, threadinfo ffff88004d6ea000, task ffff88004d44db40)
[  312.221384] Stack:
[  312.221396]  ffff88004d6ebdc0 ffff880041c4db40 ffff88004d6ebde0 ffffffff81052aaa
[  312.221442]  ffff880041c4db40 0000000000000000 ffff88004d6ebe10 ffffffff8107a148
[  312.221487]  ffff88005ad521f0 ffff88005ad52228 ffff88004d44db40 ffff88005ad521d8
[  312.221536] Call Trace:
[  312.221556]  [<ffffffff81052aaa>] __put_task_struct+0x4a/0x140
[  312.221587]  [<ffffffff8107a148>] kthread_stop+0x108/0x110
[  312.221616]  [<ffffffffa0412569>] vhci_shutdown_connection+0x49/0x2b4 [vhci_hcd]
[  312.221657]  [<ffffffffa0139920>] event_handler_loop+0x70/0x140 [usbip_core]
[  312.221692]  [<ffffffff8107ad30>] ? add_wait_queue+0x60/0x60
[  312.221721]  [<ffffffffa01398b0>] ? usbip_stop_eh+0x30/0x30 [usbip_core]
[  312.221754]  [<ffffffff8107a453>] kthread+0x93/0xa0
[  312.221784]  [<ffffffff81670e84>] kernel_thread_helper+0x4/0x10
[  312.221814]  [<ffffffff8107a3c0>] ? flush_kthread_worker+0xb0/0xb0
[  312.223589]  [<ffffffff81670e80>] ? gs_change+0x13/0x13
[  312.225360] Code: 0b 0f 0b 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 48 8b 87 58 04 00 00 48 89 fb 48 8b bf 50 04 00 00
<8b> 00 48 c7 83 50 04 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0
[  312.229663] RIP  [<ffffffff8108186f>] exit_creds+0x1f/0x70
[  312.231696]  RSP <ffff88004d6ebdb0>
[  312.233648] CR2: 0000000000000000
[  312.256464] ---[ end trace 1971ce612a167279 ]---
Signed-off-by: Nnavin patidar <navinp@cdac.in>
Acked-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

stub_shutdown_connection() should set kernel thread pointers to NULL after killing them.
so that at the time of usbip_host removal stub_shutdown_connection() doesn't try to kill kernel threads
which are already killed.

[ 1504.312158] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 1504.315833] IP: [<ffffffff8108186f>] exit_creds+0x1f/0x70
[ 1504.317688] PGD 41f1c067 PUD 41d0f067 PMD 0
[ 1504.319611] Oops: 0000 [#2] SMP
[ 1504.321480] Modules linked in: vhci_hcd(O) usbip_host(O-) usbip_core(O) uas usb_storage joydev parport_pc bnep rfcomm ppdev binfmt_misc
snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi arc4 snd_rawmidi snd_seq_midi_event
snd_seq ath9k mac80211 ath9k_common ath9k_hw snd_timer snd_seq_device snd ath i915 drm_kms_helper drm psmouse cfg80211 coretemp soundcore
lpc_ich i2c_algo_bit snd_page_alloc video intel_ips wmi btusb mac_hid bluetooth ideapad_laptop lp sparse_keymap serio_raw mei microcode parport r8169
[ 1504.329666] CPU 1
[ 1504.329687] Pid: 2434, comm: usbip_eh Tainted: G      D    O 3.6.0-rc31+ #2 LENOVO 20042                           /Base Board Product Name
[ 1504.333502] RIP: 0010:[<ffffffff8108186f>]  [<ffffffff8108186f>] exit_creds+0x1f/0x70
[ 1504.335371] RSP: 0018:ffff880041c7fdd0  EFLAGS: 00010282
[ 1504.337226] RAX: 0000000000000000 RBX: ffff880041c2db40 RCX: ffff880041e4ae50
[ 1504.339101] RDX: 0000000000000044 RSI: 0000000000000286 RDI: 0000000000000000
[ 1504.341027] RBP: ffff880041c7fde0 R08: ffff880041c7e000 R09: 0000000000000000
[ 1504.342934] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
[ 1504.344840] R13: 0000000000000000 R14: ffff88004d448000 R15: ffff880041c7fea0
[ 1504.346743] FS:  0000000000000000(0000) GS:ffff880077440000(0000) knlGS:0000000000000000
[ 1504.348671] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1504.350612] CR2: 0000000000000000 CR3: 0000000041d0d000 CR4: 00000000000007e0
[ 1504.352723] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1504.354734] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1504.356737] Process usbip_eh (pid: 2434, threadinfo ffff880041c7e000, task ffff88004d448000)
[ 1504.358711] Stack:
[ 1504.360635]  ffff880041c7fde0 ffff880041c2db40 ffff880041c7fe00 ffffffff81052aaa
[ 1504.362589]  ffff880041c2db40 0000000000000000 ffff880041c7fe30 ffffffff8107a148
[ 1504.364539]  ffff880041e4ae10 ffff880041e4ae00 ffff88004d448000 ffff88004d448000
[ 1504.366470] Call Trace:
[ 1504.368368]  [<ffffffff81052aaa>] __put_task_struct+0x4a/0x140
[ 1504.370307]  [<ffffffff8107a148>] kthread_stop+0x108/0x110
[ 1504.370312]  [<ffffffffa040da4e>] stub_shutdown_connection+0x3e/0x1b0 [usbip_host]
[ 1504.370315]  [<ffffffffa03fd920>] event_handler_loop+0x70/0x140 [usbip_core]
[ 1504.370318]  [<ffffffff8107ad30>] ? add_wait_queue+0x60/0x60
[ 1504.370320]  [<ffffffffa03fd8b0>] ? usbip_stop_eh+0x30/0x30 [usbip_core]
[ 1504.370322]  [<ffffffff8107a453>] kthread+0x93/0xa0
[ 1504.370327]  [<ffffffff81670e84>] kernel_thread_helper+0x4/0x10
[ 1504.370330]  [<ffffffff8107a3c0>] ? flush_kthread_worker+0xb0/0xb0
[ 1504.370332]  [<ffffffff81670e80>] ? gs_change+0x13/0x13
[ 1504.370351] Code: 0b 0f 0b 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 48 8b 87 58 04 00 00 48 89 fb 48 8b bf 50 04 00 00
<8b> 00 48 c7 83 50 04 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0
[ 1504.370353] RIP  [<ffffffff8108186f>] exit_creds+0x1f/0x70
[ 1504.370353]  RSP <ffff880041c7fdd0>
[ 1504.370354] CR2: 0000000000000000
[ 1504.401376] ---[ end trace 1971ce612a16727a ]---
Signed-off-by: Nnavin patidar <navinp@cdac.in>
Acked-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

`parse_insn()` is dereferencing the user-space pointer `insn->data`
directly when handling the `INSN_INTTRIG` comedi instruction.  It
shouldn't be using `insn->data` at all; it should be using the separate
`data` pointer passed to the function.  Fix it.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

`insn_rw_emulate_bits()` is used to emulate the `INSN_READ` and
`INSN_WRITE` comedi instructions for subdevices that don't have an
`insn_read()` or `insn_write()` handler but do have an `insn_bits()`
handler.

The function fills in a temporary `struct comedi_insn` called `new_insn`
to pass to the subdevice's `insn_bits()` handler.  In doing so, it sets
the `new_insn.data` pointer to point to a temporary data array.  This
results in a warning from "sparse" because the `data` pointer in `struct
comedi_insn` has the `__user` tag.  The subdevice's `insn_bits()`
handler ignores it anyway as it gets passed a pointer to the temporary
data array in a separate parameter.  Don't bother setting
`new_insn.data`; just leave it set to `NULL` (done by an earlier
`memset()`).
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For the COMEDI_DEVCONFIG ioctl, the user application may embed a pointer
to firmware data within a designated element (or two elements for 64-bit
pointers) of the `options[]` array in the `struct comedi_devconfig`.
`do_devconfig_ioctl()` calls `comedi_aux_data()` to extract the pointer
value.  It needs to be treated as a `__user` pointer so the firmware
data can be copied into kernel memory, so cast the result of
`comedi_aux_data()` to avoid a "sparse" warning.  This is not ideal but
`comedi_aux_data()` is called elsewhere in a wholly kernel memory
context so we can't just change its return type to include the `__user`
tag.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'pci_base' variable is only used to hold the pci_resource_start()
value used to ioremap the pci bars. Remove the local variable and just
use pci_resource_start() directly in the ioremap.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use pci_resource_len() when doing the ioremap instead of assuming
the resource size.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

After a successful attach, output a simple dev_info message.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the dev->driver->driver_name instead of the literal string
for the reqource name passed to comedi_pci_enable().
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver no longer uses comedi_config to attach so this comment
does not apply.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These kernel messages are just noise and should be removed in
the final driver.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

DEBUG_EEPROM is not defined anywhere and these messages are just
noise. Remove them.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

They are commented out and are are just noise anyway.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the whitespace of the range table to avoid the > 80 char
lines and the ugly line breaks. Convert the RANGE() values into
the appropriate {BIP,UNI}_RANGE().
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This comedi_lrange is the same as the global range_bipolar10
exported by the comedi core. Use that range instead.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an 'attach_pci' callback function. Since the
driver does not require any external configuration options. and
the legacy 'attach' callback is now optional, remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver requires loading a firmware file for the cpld. This
is currently being done by passing the firmware data using the
COMEDI_DEVCONFIG ioctl through the attach() hook in the driver.
This does not work for auto-configured PCI devices due to the
firmware loading options not being set in the comedi_devconfig
parameter passed to the driver.

Change the driver so it gets the firmware using request_firmware()
and ignore any firmware options passed in the comedi_devconfig.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These macros rely on a local variable having a specific name.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In this driver the PCI bar 2 resource is being ioremap'ed to a
void * in the private data. This void * is then being cast to a
struct daqboard2000_hw * that defines all the registers used by
the driver.

This is causing a number of sparse warnings similar to:

  warning: incorrect type in argument 1 (different address space)
     expected void const volatile [noderef] <asn:2>*addr
     got void *

Change the type in the private data to void __iomem * to correctly
store the ioremap'ed address.

Remove struct daqboard2000_hw and change the contents to #define's
for the register memory map.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename 'chanlist_saver' to 'user_chanlist' to avoid confusion that
it's actually a __user *.

The chanlist pointer in comedi_cmd is still a user space pointer when
the comedi_cmd is copied with copy_from_user() in do_cmd_ioctl() and
do_cmdtest_ioctl(). This pointer needs to be cast when it is saved in
user_chanlist in order to preserve its address space.

The copy_from_user() call to copy the chanlist to the kernel space
comedi_command requires the second parameter to be a __user pointer.
Use the correctly cast user_chanlist instead of cmd->chanlist.

Before the comedi_cmd is copied back to user space, the saved
user_chanlist pointer is restored. Cast the user_chanlist again so
that the address space matches the comedi_cmd.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Acked-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This local variable is used to hold the comedi_cmd that is passed
to the kernel as the argument to the COMEDI_CMDTEST ioctl. Its filled
in with a copy_from_user() call. The name 'user_cmd' is a bit
confusing since it's actually kernel data.

Rename the local variable to 'cmd' to avoid the confusion.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Acked-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This local variable is used to hold the comedi_cmd that is passed
to the kernel as the argument to the COMEDI_CMD ioctl. Its filled
in with a copy_from_user() call. The name 'user_cmd' is a bit
confusing since it's actually kernel data.

Rename the local variable to 'cmd' to avoid the confusion.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Acked-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This parameter is actually the unsigned long arg passed in the ioctl.
comedi_unlocked_ioctl() casts it as a (struct comedi_cmd __user *)
when calling do_cmd_ioctl(). Rename the variable to keep this clear.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Acked-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'chanlist' is passed to the kernel from user space with the
COMEDI_CMD and COMEDI_CMDTEST ioctls. The do_cmd_ioctl() and
do_cmdtest_ioctl() functions in comedi_fops.c copy this data
to/from user space to kernel space correctly.

Unfortunately, this data is copied back into a struct comedi_cmd
so when the cmd is passed down to the drivers they still see the
pointer as __user data. This results is a number of sparse errors
such as:

  warning: dereference of noderef expression

  warning: incorrect type in argument 2 (different address spaces)
     expected void const *<noident>
     got unsigned int [noderef] <asn:1>*chanlist

  warning: incorrect type in argument 3 (different address spaces)
     expected unsigned int *chanlist
     got unsigned int [noderef] <asn:1>*chanlist

  warning: incorrect type in assignment (different address spaces)
     expected unsigned int *ai_chanlist
     got unsigned int [noderef] <asn:1>*chanlist

The two functions in comedi_fops are the only ones that need the
__user tag. Remove the tag so that all the drivers see the chanlist
pointer in the correct address space.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Acked-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The extra indents in this file cause git diff to not know the
section where changes are being made. This results in diff outputs
like:

@@ -365,7 +365,10 @@

instead of the more informational:

@@ -365,6 +365,7 @@ struct comedi_cmd {

Remove all the extra indents.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Acked-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Smatch is warning about a dereference before we check for NULL.
This patch moves the dereference to after the NULL check.

Smatch warning:
drivers/staging/wlan-ng/cfg80211.c:345 prism2_scan() warn:
	variable dereferenced before check 'request' (see line 332)
Signed-off-by: NEmil Goode <emilgoode@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Generated by: scripts/coccinelle/null/badzero.cocci
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch cuddles braces as reported
by checkpatch.pl.
Signed-off-by: NKevin McKinney <klmckinney1@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch properly formats comments
as reported by checkpatch.pl.
Signed-off-by: NKevin McKinney <klmckinney1@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes all white space issues
as reported by checkpatch.pl.
Signed-off-by: NKevin McKinney <klmckinney1@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

remove code or change to traditional comments
Signed-off-by: NDaniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix up all the returns to cannonical form, and an ifdef removal
Signed-off-by: NDaniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

As discussed at the kernel summit this year, CONFIG_EXPERIMENTAL means
nothing, so let's get rid of it.

Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Properly check the return value of copy_from/to_user() and handle any
errors that might happen.

This removes a bunch of compiler warnings.

Cc: Alois Schlögl <alois.schloegl@ist.ac.at>
Cc: Greg P. Smith <greg@ced.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A basic Lindent run on the .c files, clean up the .h file by hand.

Cc: Alois Schlögl <alois.schloegl@ist.ac.at>
Cc: Greg P. Smith <greg@ced.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds the ced1401 driver to the build system.

Yes, there are a lot of warning messages, but it does compile, so it
should be good to get going.

Cc: Alois Schlögl <alois.schloegl@ist.ac.at>
Cc: Greg P. Smith <greg@ced.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds a first cut of a TODO file to get this driver out of the
staging directory.

Cc: Alois Schlögl <alois.schloegl@ist.ac.at>
Cc: Greg P. Smith <greg@ced.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes up the usb1401.c file to remove the usage of err() (which is
gone), and the two-argument kmap_atomic() call, and the compat_ioctl
pointer warning.

The code now builds properly, there are lots of warnings still, but it's
a start.

Cc: Alois Schlögl <alois.schloegl@ist.ac.at>
Cc: Greg P. Smith <greg@ced.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This was imported from the
http://pub.ist.ac.at/~schloegl/src/ced1401/.git git repo at the request
of Alois.  The driver originally came from Cambridge Electronic Design
Ltd and was authored by Greg P Smith and others, but Alois did the
maintance work to get it into a semi-building state and pushed to get it
into the main kernel tree here.

Cc: Alois Schlögl <alois.schloegl@ist.ac.at>
Cc: Greg P. Smith <greg@ced.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Quiet some sparse warnings about:

warning: Using plain integer as NULL pointer
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>