- 24 10月, 2010 40 次提交
-
-
由 Alexander Graf 提交于
This is the guest side of the mtsr acceleration. Using this a guest can now call mtsrin with almost no overhead as long as it ensures that it only uses it with (MSR_IR|MSR_DR) == 0. Linux does that, so we're good. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Now that the actual mtsr doesn't do anything anymore, we can move the sr contents over to the shared page, so a guest can directly read and write its sr contents from guest context. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Right now we're examining the contents of Book3s_32's segment registers when the register is written and put the interpreted contents into a struct. There are two reasons this is bad. For starters, the struct has worse real-time performance, as it occupies more ram. But the more important part is that with segment registers being interpreted from their raw values, we can put them in the shared page, allowing guests to mess with them directly. This patch makes the internal representation of SRs be u32s. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The current approach duplicates the spr->bat finding logic and makes it harder to reuse the actually used variables. So let's move everything down to the spr handler. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
We will soon add SR PV support to the shared page, so we need some infrastructure that allows the guest to query for features KVM exports. This patch adds a second return value to the magic mapping that indicated to the guest which features are available. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The define VSID_ALL is unused. Let's remove it. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
It turns out the in-kernel hash function is sub-optimal for our subtle hash inputs where every bit is significant. So let's revert to the original hash functions. This reverts commit 05340ab4f9a6626f7a2e8f9fe5397c61d494f445. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
This patch moves debugging printks for shadow SLB debugging over to tracepoints. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
There is a race condition in the pte invalidation code path where we can't be sure if a pte was invalidated already. So let's move the spin lock around to get rid of the race. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
When hitting a no-execute or read-only data/inst storage interrupt we were flushing the respective PTE so we're sure it gets properly overwritten next. According to the spec, this is unnecessary though. The guest issues a tlbie anyways, so we're safe to just keep the PTE around and have it manually removed from the guest, saving us a flush. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
When the guest jumps into kernel mode and has the magic page mapped, theres a very high chance that it will also use it. So let's detect that scenario and map the segment accordingly. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The different ways of flusing shadow ptes have their own debug prints which use stupid old printk. Let's move them to tracepoints, making them easier available, faster and possible to activate on demand Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
After a flush the sid map contained lots of entries with 0 for their gvsid and hvsid value. Unfortunately, 0 can be a real value the guest searches for when looking up a vsid so it would incorrectly find the host's 0 hvsid mapping which doesn't belong to our sid space. So let's also check for the valid bit that indicated that the sid we're looking at actually contains useful data. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
This patch moves the SPTE flush debug printk over to tracepoints. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
This patch moves the generic mmu map debugging over to tracepoints. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
This patch moves Book3s MMU debugging over to tracepoints. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
We have a debug printk on every exit that is usually #ifdef'ed out. Using tracepoints makes a lot more sense here though, as they can be dynamically enabled. This patch converts the most commonly used debug printks of EXIT_DEBUG to tracepoints. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Takuya Yoshikawa 提交于
The following patch commit 57ce1659316f4ca298919649f9b1b55862ac3826 KVM: x86: In DM_LOWEST, only deliver interrupts to vcpus with enabled LAPIC's ignored the fact that kvm_irq_delivery_to_apic() was also used by ia64. We define kvm_lapic_enabled() to fix a compile error caused by this. This will have the same effect as reverting the problematic patch for ia64. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
The audit is very high overhead, so we need lower the frequency to assure the guest is running. Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Both audit_mappings() and audit_sptes_have_rmaps() need to walk vcpu's page table, so we can do these checking in a spte walking Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Both audit_rmap() and audit_write_protection() need to walk all active sp, so we can do these checking in a sp walking Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Move the audit code from arch/x86/kvm/mmu.c to arch/x86/kvm/mmu_audit.c Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Add a r/w module parameter named 'mmu_audit', it can control audit enable/disable: enable: echo 1 > /sys/module/kvm/parameters/mmu_audit disable: echo 0 > /sys/module/kvm/parameters/mmu_audit This patch not change the logic Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jes Sorensen 提交于
MSR_K7_CLK_CTL is a no longer documented MSR, which is only relevant on said old AMD CPU models. This change returns the expected value, which the Linux kernel is expecting to avoid writing back the MSR, plus it ignores all writes to the MSR. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
ICW is not a full reset, instead it resets a limited number of registers in the PIC. Change ICW1 emulation to only reset those registers. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
x86_emulate_insn() is full of things like if (rc != X86EMUL_CONTINUE) goto done; break; consolidate all of those at the end of the switch statement. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
These are all undefined. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
It is read/only; restoring it only results in annoying messages. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Otherwise EFER_LMA bit is retained across a SIPI reset. Fixes guest cpu onlining. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
Since commit aad82703 no mmu reinitialization is performed via init_vmcb. Zero vcpu->arch.cr0 and pass the reset value as a parameter to kvm_set_cr0. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
out = write, in = read, not the other way round. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Nothing is checked in count_rmaps(), so remove it Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
There is a bugs in this function, we call gfn_to_pfn() and kvm_mmu_gva_to_gpa_read() in atomic context(kvm_mmu_audit() is called under the spinlock(mmu_lock)'s protection). This patch fix it by: - introduce gfn_to_pfn_atomic instead of gfn_to_pfn - get the mapping gfn from kvm_mmu_page_get_gfn() And it adds 'notrap' ptes check in unsync/direct sps Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
The audit code reports some sp not write protected in current code, it's just the bug in audit_write_protection(), since: - the invalid sp not need write protected - using uninitialize local variable('gfn') - call kvm_mmu_audit() out of mmu_lock's protection Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
The read-only spte also has reverse mapping, so fix the code to check them, also modify the function name to fit its doing Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
fix: arch/x86/kvm/mmu.c: In function ‘kvm_mmu_unprotect_page’: arch/x86/kvm/mmu.c:1741: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’ arch/x86/kvm/mmu.c:1745: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’ arch/x86/kvm/mmu.c: In function ‘mmu_unshadow’: arch/x86/kvm/mmu.c:1761: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’ arch/x86/kvm/mmu.c: In function ‘set_spte’: arch/x86/kvm/mmu.c:2005: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’ arch/x86/kvm/mmu.c: In function ‘mmu_set_spte’: arch/x86/kvm/mmu.c:2033: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 7 has type ‘gfn_t’ Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jason Wang 提交于
Pit interrupt injection was done by workqueue, so no need to check pending pit timer in vcpu thread which could lead unnecessary unblocking of vcpu. Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Alexander Graf 提交于
When CONFIG_KVM_GUEST is selected, but CONFIG_KVM is not, we were missing some defines in asm-offsets.c and included too many headers at other places. This patch makes above configuration work. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
The ALU opcode block is very regular; introduce D6ALU() to define decode flags for 6 instructions at a time. Suggested by Paolo Bonzini. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-