- 20 5月, 2011 30 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, gart: Rename pci-gart_64.c to amd_gart_64.c x86/amd-iommu: Use threaded interupt handler arch/x86/kernel/pci-iommu_table.c: Convert sprintf_symbol to %pS x86/amd-iommu: Add support for invalidate_all command x86/amd-iommu: Add extended feature detection x86/amd-iommu: Add ATS enable/disable code x86/amd-iommu: Add flag to indicate IOTLB support x86/amd-iommu: Flush device IOTLB if ATS is enabled x86/amd-iommu: Select PCI_IOV with AMD IOMMU driver PCI: Move ATS declarations in seperate header file dma-debug: print information about leaked entry x86/amd-iommu: Flush all internal TLBs when IOMMUs are enabled x86/amd-iommu: Rename iommu_flush_device x86/amd-iommu: Improve handling of full command buffer x86/amd-iommu: Rename iommu_flush* to domain_flush* x86/amd-iommu: Remove command buffer resetting logic x86/amd-iommu: Cleanup completion-wait handling x86/amd-iommu: Cleanup inv_pages command handling x86/amd-iommu: Move inv-dte command building to own function x86/amd-iommu: Move compl-wait command building to own function
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (34 commits) PM: Introduce generic prepare and complete callbacks for subsystems PM: Allow drivers to allocate memory from .prepare() callbacks safely PM: Remove CONFIG_PM_VERBOSE Revert "PM / Hibernate: Reduce autotuned default image size" PM / Hibernate: Add sysfs knob to control size of memory for drivers PM / Wakeup: Remove useless synchronize_rcu() call kmod: always provide usermodehelper_disable() PM / ACPI: Remove acpi_sleep=s4_nonvs PM / Wakeup: Fix build warning related to the "wakeup" sysfs file PM: Print a warning if firmware is requested when tasks are frozen PM / Runtime: Rework runtime PM handling during driver removal Freezer: Use SMP barriers PM / Suspend: Do not ignore error codes returned by suspend_enter() PM: Fix build issue in clock_ops.c for CONFIG_PM_RUNTIME unset PM: Revert "driver core: platform_bus: allow runtime override of dev_pm_ops" OMAP1 / PM: Use generic clock manipulation routines for runtime PM PM: Remove sysdev suspend, resume and shutdown operations PM / PowerPC: Use struct syscore_ops instead of sysdevs for PM PM / UNICORE32: Use struct syscore_ops instead of sysdevs for PM PM / AVR32: Use struct syscore_ops instead of sysdevs for PM ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Use pci_dev->revision RDMA/iwcm: Get rid of enum iw_cm_event_status IB/ipath: Use pci_dev->revision, again IB/qib: Prevent driver hang with unprogrammed boards RDMA/cxgb4: EEH errors can hang the driver RDMA/cxgb4: Reset wait condition atomically RDMA/cxgb4: Fix missing parentheses RDMA/cxgb4: Initialization errors can cause crash RDMA/cxgb4: Don't change QP state outside EP lock RDMA/cma: Add an ID_REUSEADDR option RDMA/cma: Fix handling of IPv6 addressing in cma_use_port
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm: kmemleak: Initialise kmemleak after debug_objects_mem_init() kmemleak: Select DEBUG_FS unconditionally in DEBUG_KMEMLEAK kmemleak: Do not return a pointer to an object that kmemleak did not get
-
git://git.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (48 commits) MIPS: Move arch_get_unmapped_area and gang to new file. MIPS: Cleanup arch_get_unmapped_area MIPS: Octeon: Don't request interrupts for unused IPI mailbox bits. Octeon: Fix interrupt irq settings for performance counters. MIPS: Fix build warnings on defconfigs MIPS: Lemote 2F, Malta: Fix build warning MIPS: Set ELF AT_PLATFORM string for Loongson2 processors MIPS: Set ELF AT_PLATFORM string for BMIPS processors MIPS: Introduce set_elf_platform() helper function MIPS: JZ4740: setup: Autodetect physical memory. MIPS: BCM47xx: Fix MAC address parsing. MIPS: BCM47xx: Extend the filling of SPROM from NVRAM MIPS: BCM47xx: Register SSB fallback sprom callback MIPS: BCM47xx: Extend bcm47xx_fill_sprom with prefix. SSB: Change fallback sprom to callback mechanism. MIPS: Alchemy: Clean up GPIO registers and accessors MIPS: Alchemy: Cleanup DMA addresses MIPS: Alchemy: Rewrite ethernet platform setup MIPS: Alchemy: Rewrite UART setup and constants. MIPS: Alchemy: Convert dbdma.c to syscore_ops ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: input/atari: Fix mouse movement and button mapping input/atari: Fix atarimouse init input/atari: Use the correct mouse interrupt hook m68k/atari: Do not use "/" in interrupt names m68k: unistd - Comment out definitions for unimplemented syscalls m68k: Really wire up sys_pselect6 and sys_ppoll m68k: Merge mmu and non-mmu versions of sys_call_table MAINTAINERS: Roman Zippel has been MIA for several years. m68k: bitops - Never step beyond the end of the bitmap m68k: bitops - offset == ((long)p - (long)vaddr) * 8
-
由 Linus Torvalds 提交于
Merge branches 'stable/irq', 'stable/p2m.bugfixes', 'stable/e820.bugfixes' and 'stable/mmu.bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/irq' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: do not clear and mask evtchns in __xen_evtchn_do_upcall * 'stable/p2m.bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/p2m: Create entries in the P2M_MFN trees's to track 1-1 mappings * 'stable/e820.bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/setup: Fix for incorrect xen_extra_mem_start initialization under 32-bit xen/setup: Ignore E820_UNUSABLE when setting 1-1 mappings. * 'stable/mmu.bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen mmu: fix a race window causing leave_mm BUG()
-
由 Linus Torvalds 提交于
Merge branches 'stable/balloon.cleanup' and 'stable/general.cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/balloon.cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/balloon: Move dec_totalhigh_pages() from __balloon_append() to balloon_append() xen/balloon: Clarify credit calculation xen/balloon: Simplify HVM integration xen/balloon: Use PageHighMem() for high memory page detection * 'stable/general.cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: drivers/xen/sys-hypervisor: Cleanup code/data sections definitions arch/x86/xen/smp: Cleanup code/data sections definitions arch/x86/xen/time: Cleanup code/data sections definitions arch/x86/xen/xen-ops: Cleanup code/data sections definitions arch/x86/xen/mmu: Cleanup code/data sections definitions arch/x86/xen/setup: Cleanup code/data sections definitions arch/x86/xen/enlighten: Cleanup code/data sections definitions arch/x86/xen/irq: Cleanup code/data sections definitions xen: tidy up whitespace in drivers/xen/Makefile
-
由 Linus Torvalds 提交于
Merge branches 'stable/backend.base.v3' and 'stable/gntalloc.v7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/backend.base.v3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: Fix compiler error when CONFIG_XEN_PRIVILEGED_GUEST is not set. xen/p2m: Add EXPORT_SYMBOL_GPL to the M2P override functions. xen/p2m/m2p/gnttab: Support GNTMAP_host_map in the M2P override. xen/irq: The Xen hypervisor cleans up the PIRQs if the other domain forgot. xen/irq: Export 'xen_pirq_from_irq' function. xen/irq: Add support to check if IRQ line is shared with other domains. xen/irq: Check if the PCI device is owned by a domain different than DOMID_SELF. xen/pci: Add xen_[find|register|unregister]_device_domain_owner functions. * 'stable/gntalloc.v7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/gntdev,gntalloc: Remove unneeded VM flags
-
由 Linus Torvalds 提交于
Merge branch 'stable/broadcom.ibft' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6 * 'stable/broadcom.ibft' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6: iscsi_ibft: search for broadcom specific ibft sign (v2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'move-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Move x86 drivers to drivers/cpufreq/
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] remove redundant sprintf from request_module call. [CPUFREQ] cpufreq_stats.c: Fixed brace coding style issue [CPUFREQ] Fix memory leak in cpufreq_stat [CPUFREQ] cpufreq.h: Fix some checkpatch.pl coding style issues. [CPUFREQ] use dynamic debug instead of custom infrastructure [CPUFREQ] CPU hotplug, re-create sysfs directory and symlinks [CPUFREQ] Fix _OSC UUID in pcc-cpufreq
-
由 Dave Jones 提交于
Signed-off-by: NDave Jones <davej@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: params.c: Use new strtobool function to process boolean inputs debugfs: move to new strtobool Add a strtobool function matching semantics of existing in kernel equivalents modpost: Update 64k section support for binutils 2.18.50 module: Use binary search in lookup_symbol() module: Use the binary search for symbols resolution lib: Add generic binary search function to the kernel. module: Sort exported symbols module: each_symbol_section instead of each_symbol module: split unset_section_ro_nx function. module: undo module RONX protection correctly. module: zero mod->init_ro_size after init is freed. minor ANSI prototype sparse fix module: reorder kparam_array to remove alignment padding on 64 bit builds module: remove 64 bit alignment padding from struct module with CONFIG_TRACE* module: do not hide __modver_version_show declaration behind ifdef module: deal with alignment issues in built-in module versions
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs由 Linus Torvalds 提交于
* 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs: Correct occurrences of - Documentation/kvm/ to Documentation/virtual/kvm - Documentation/uml/ to Documentation/virtual/uml - Documentation/lguest/ to Documentation/virtual/lguest throughout the kernel source tree. Add a 00-INDEX file to Documentation/virtual Remove uml from the top level 00-INDEX file. Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:
-
由 Linus Torvalds 提交于
This is removes the use of software prefetching from the regular list iterators. We don't want it. If you do want to prefetch in some iterator of yours, go right ahead. Just don't expect the iterator to do it, since normally the downsides are bigger than the upsides. It also replaces <linux/prefetch.h> with <linux/const.h>, because the use of LIST_POISON ends up needing it. <linux/poison.h> is sadly not self-contained, and including prefetch.h just happened to hide that. Suggested by David Miller (networking has a lot of regular lists that are often empty or a single entry, and prefetching is not going to do anything but add useless instructions). Acked-by: NIngo Molnar <mingo@elte.hu> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: linux-arch@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
They not only increase the code footprint, they actually make things slower rather than faster. On internationally acclaimed benchmarks ("make -j16" on an already fully built kernel source tree) the hlist prefetching slows down the build by up to 1%. (Almost all of it comes from hlist_for_each_entry_rcu() as used by avc_has_perm_noaudit(), which is very hot due to all the pathname lookups to see if there is anything to do). The cause seems to be two-fold: - on at least some Intel cores, prefetch(NULL) ends up with some microarchitectural stall due to the TLB miss that it incurs. The hlist case triggers this very commonly, since the NULL pointer is the last entry in the list. - the prefetch appears to cause more D$ activity, probably because it prefetches hash list entries that are never actually used (because we ended the search early due to a hit). Regardless, the numbers clearly say that the implicit prefetching is simply a bad idea. If some _particular_ user of the hlist iterators wants to prefetch the next list entry, they can do so themselves explicitly, rather than depend on all list iterators doing so implicitly. Acked-by: NIngo Molnar <mingo@elte.hu> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: linux-arch@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
Kmemleak frees objects via RCU and when CONFIG_DEBUG_OBJECTS_RCU_HEAD is enabled, the RCU callback triggers a call to free_object() in lib/debugobjects.c. Since kmemleak is initialised before debug objects initialisation, it may result in a kernel panic during booting. This patch moves the kmemleak_init() call after debug_objects_mem_init(). Reported-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Tested-by: NTejun Heo <tj@kernel.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: <stable@kernel.org>
-
由 Catalin Marinas 提交于
In the past DEBUG_FS used to depend on SYSFS and DEBUG_KMEMLEAK selected it conditionally. This is no longer the case, so always select DEBUG_FS via DEBUG_KMEMLEAK. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
The kmemleak_seq_next() function tries to get an object (and increment its use count) before returning it. If it could not get the last object during list traversal (because it may have been freed), the function should return NULL rather than a pointer to such object that it did not get. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Reported-by: NPhil Carmody <ext-phil.2.carmody@nokia.com> Acked-by: NPhil Carmody <ext-phil.2.carmody@nokia.com> Cc: <stable@kernel.org>
-
由 Geert Uytterhoeven 提交于
Up and down movements were reversed, left and right buttons were swapped. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Michael Schmitz 提交于
Atarimouse fails to load as a module (with ENODEV), due to a brown paper bag bug, misinterpreting the semantics of atari_keyb_init(). [geert] Propagate the return value of atari_keyb_init() everywhere Signed-off-by: NMichael Schmitz <schmitz@debian.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Michael Schmitz 提交于
The Atari keyboard driver calls atari_mouse_interrupt_hook if it's set, not atari_input_mouse_interrupt_hook. Fix below. [geert] Killed off atari_mouse_interrupt_hook completely, after fixing another incorrect assignment in atarimouse.c. Signed-off-by: NMichael Schmitz <schmitz@debian.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
It may trigger a warning in fs/proc/generic.c:__xlate_proc_name() when trying to add an entry for the interrupt handler to sysfs. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Suggested-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
We reserved the numbers a long time ago, but never wired them up in the syscall table as they need TIF_RESTORE_SIGMASK, which we only got last year in commit cb6831d5d3099e772a510eb3e1ed0760ccffb45e ("m68k: Switch to saner sigsuspend()") Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NGreg Ungerer <gerg@uclinux.org> Cc: stable@kernel.org
-
由 Geert Uytterhoeven 提交于
Impact for nommu: - Store table in .rodata instead of .text, - Let kernel/sys_ni.c handle the stubbing of MMU-only syscalls, - Implement sys_mremap and sys_nfsservct, - Remove unused padding at the end of the table. Impact for mmu: - Store table in .rodata instead of .data. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Geert Uytterhoeven 提交于
Hence make AFFS and HFS orphans, and remove him as an m68k maintainer. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
find_next bitops on m68k (find_next_zero_bit, find_next_bit, and find_next_bit_le) may cause out of bounds memory access when the bitmap size in bits % 32 != 0 and offset (the bitnumber to start searching at) is very close to the bitmap size. For example, unsigned long bitmap[2] = { 0, 0 }; find_next_bit(bitmap, 63, 62); 1. find_next_bit() tries to find any set bits in bitmap[1], but no bits set. 2. Then find_first_bit(bimap + 2, -1) 3. Unfortunately find_first_bit() takes unsigned int as the size argument. 4. find_first_bit will access bitmap[2~] until it find any set bits. Add missing tests for stepping beyond the end of the bitmap to all find_{first,next}_*() functions, and make sure they never return a value larger than the bitmap size. Reported-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Hence use "offset" in find_next_{,zero_}bit(), like is already done for find_next_{,zero_}bit_le() Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 19 5月, 2011 10 次提交
-
-
由 Daniel Kiper 提交于
Cleanup code/data sections definitions accordingly to include/linux/init.h. Signed-off-by: NDaniel Kiper <dkiper@net-space.pl> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Daniel Kiper 提交于
Cleanup code/data sections definitions accordingly to include/linux/init.h. Signed-off-by: NDaniel Kiper <dkiper@net-space.pl> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Daniel Kiper 提交于
Cleanup code/data sections definitions accordingly to include/linux/init.h. Signed-off-by: NDaniel Kiper <dkiper@net-space.pl> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Daniel Kiper 提交于
Cleanup code/data sections definitions accordingly to include/linux/init.h. Signed-off-by: NDaniel Kiper <dkiper@net-space.pl> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Daniel Kiper 提交于
Cleanup code/data sections definitions accordingly to include/linux/init.h. Signed-off-by: NDaniel Kiper <dkiper@net-space.pl> [v1: Rebased on top of latest linus's to include fixes in mmu.c] Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Ralf Baechle 提交于
It never really belonged into syscall.c and it's about to become well more complex. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
As noticed by Kevin Cernekee <cernekee@gmail.com> in http://www.linux-mips.org/cgi-bin/extract-mesg.cgi?a=linux-mips&m=2011-05&i=BANLkTikq04wuK%3Dbz%2BLieavmm3oDtoYWKxg%40mail.gmail.com Patchwork: https://patchwork.linux-mips.org/patch/2387/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
We only use the three low-order mailbox bits. Leave the upper bits alone for possible use by drivers and other software. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2090/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chandrakala Chavva 提交于
Octeon uses different interrupt irq for timer and performance counters. Set CvmCtl[IPPCI] to correct irq value very early. Signed-off-by: NChandrakala Chavva <cchavva@caviumnetworks.com> Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Chandrakala Chavva <cchavva@caviumnetworks.com> Patchwork: https://patchwork.linux-mips.org/patch/2085/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wanlong Gao 提交于
Since d45dcef7 ["Bluetooth: Fix BT_L2CAP and BT_SCO in Kconfig"] BT_L2CAP=m and BT_SCO=m are no longer valid so change the settings from m to y. [ralf@linux-mips.org: Merging only the MIPS parts of this patch.] Signed-off-by: NWanlong Gao <wanlong.gao@gmail.com> To: akpm@linux-foundation.org To: manuel.lauss@googlemail.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linuxppc-dev@lists.ozlabs.org Patchwork: https://patchwork.linux-mips.org/patch/2277/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-