- 29 11月, 2017 1 次提交
-
-
由 Wolfram Sang 提交于
Platform data is not the right place for such declarations, use devices.h in the mach-directory where the rest is located. Note that the some board files needed an additional include for this to work. Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
-
- 29 8月, 2016 1 次提交
-
-
由 Russell King 提交于
Commit b70661c7 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c7 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 12月, 2015 1 次提交
-
-
由 Arnd Bergmann 提交于
Lots of header files are never included outside of a mach-pxa directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 25 12月, 2012 1 次提交
-
-
由 Stephen Warren 提交于
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NStephen Warren <swarren@nvidia.com>
-
- 26 1月, 2012 1 次提交
-
-
由 Rob Herring 提交于
Remove NR_IRQS and add a per machine .nr_irqs setting. Signed-off-by: NRob Herring <rob.herring@calxeda.com>
-
- 05 1月, 2012 1 次提交
-
-
由 Russell King 提交于
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: NRichard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 28 9月, 2011 1 次提交
-
-
由 Paul Bolle 提交于
There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 22 8月, 2011 1 次提交
-
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 12 7月, 2011 2 次提交
-
-
由 Eric Miao 提交于
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Eric Miao 提交于
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
- 21 3月, 2011 1 次提交
-
-
This patch moves the platform data definition from arch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so it can be accessed from x86 the same way as on ARM. This change should make no functional change to the PXA code. The move is verified by building the following defconfigs: cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig pxa910_defconfig Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 16 12月, 2010 2 次提交
-
-
由 Marek Vasut 提交于
This is important because on PXA3xx, the physical mapping of SMEMC registers differs from the one on PXA2xx. In order to get PCMCIA working on both PXA2xx and PXA320, the PCMCIA driver was adjusted accordingly as well. Also, various places in the kernel had to be patched to use __raw_read/__raw_write. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Marek Vasut 提交于
This patch introduces pxa2xx_map_io() and pxa3xx_map_io() to distinguish between PXA25x/PXA27x and PXA3xx memory mapping. Also, fixup for platforms broken after introducing pxa{25x,27x}_map_io() and pxa3xx_map_io() is included. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
- 20 10月, 2010 1 次提交
-
-
由 Nicolas Pitre 提交于
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
-
- 01 12月, 2009 1 次提交
-
-
由 Russell King 提交于
For some platforms, it is inappropriate to register all PXA UARTs. In some cases, the UARTs may not be used, and in others we may want to avoid registering the UARTs to allow other drivers (eg, FICP) to make use of the UART. In addition, a while back there was a request to be able to pass platform data to the UART driver. This patch enables all of this by providing functions platforms can call to register each individual UART. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NMike Rapoport <mike@compulab.co.il> Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
- 10 9月, 2009 1 次提交
-
-
由 Matej Kenda 提交于
Added support for the Iskratel XCEP single board computer, embedded in instruments used in particle accelerators. The patch contains the platform specific code, Makefile and Kconfig changes for platform arm-pxa. Signed-off-by: NAleš Bardorfer <ales.bardorfer@i-tech.si> Signed-off-by: NMichael Abbott <michael.abbott@diamond.ac.uk> Signed-off-by: NMatej Kenda <matej.kenda@i-tech.si> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-