commit f61c5ba2885eabc7bc4b0b2f5232f475216ba446 upstream.

With the range check it is possible to do a quick verification that the
current mapping is correct vs. the static protection areas.

In case a incorrect mapping is detected a warning is emitted and the large
page is split up. If the large page is a 2M page, then the split code is
forced to check the static protections for the PTE entries to fix up the
incorrectness. For 1G pages this can't be done easily because that would
require to either find the offending 2M areas before the split or
afterwards. For now just warn about that case and revisit it when reported.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143546.331408643@linutronix.deSigned-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 69c31e69df3d2efc4ad7f53d500fdd920d3865a4 upstream.

If the new pgprot has the PRESENT bit cleared, then conflicts vs. RW/NX are
completely irrelevant.

Before:

 1G pages checked:                    2
 1G pages sameprot:                   0
 1G pages preserved:                  0
 2M pages checked:                  540
 2M pages sameprot:                 466
 2M pages preserved:                 47
 4K pages checked:               800770
 4K pages set-checked:             7668

After:

 1G pages checked:                    2
 1G pages sameprot:                   0
 1G pages preserved:                  0
 2M pages checked:                  540
 2M pages sameprot:                 466
 2M pages preserved:                 47
 4K pages checked:               800709
 4K pages set-checked:             7668
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143546.245849757@linutronix.deSigned-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 5c280cf6081ff99078e28b51172d78359f194fd9 upstream.

The large page preservation mechanism is just magic and provides no
information at all. Add optional statistic output in debugfs so the magic can
be evaluated. Defaults is off.

Output:

 1G pages checked:                    2
 1G pages sameprot:                   0
 1G pages preserved:                  0
 2M pages checked:                  540
 2M pages sameprot:                 466
 2M pages preserved:                 47
 4K pages checked:               800770
 4K pages set-checked:             7668
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143546.160867778@linutronix.deSigned-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 4046460b867f8b041c81c26c09d3bcad6d6e814e upstream.

The whole static protection magic is silently fixing up anything which is
handed in. That's just wrong. The offending call sites need to be fixed.

Add a debug mechanism which emits a warning if a requested mapping needs to be
fixed up. The DETECT debug mechanism is really not meant to be enabled except
for developers, so limit the output hard to the protection fixups.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143546.078998733@linutronix.deSigned-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 91ee8f5c1f50a1f4096c178a93a8da46ce3f6cc8 upstream.

Checking static protections only page by page is slow especially for huge
pages. To allow quick checks over a complete range, add the ability to do
that.

Make the checks inclusive so the ranges can be directly used for debug output
later.

No functional change.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143545.995734490@linutronix.deSigned-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit afd7969a99e072e6aa0d88511176d4d2f3009fd9 upstream.

static_protections() is pretty unreadable. Split it up into separate checks
for each protection area.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143545.913005317@linutronix.deSigned-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 8679de0959e65ee7f78db6405a8d23e61665751d upstream.

Avoid the extra variable and gotos by splitting the function into the
actual algorithm and a callable function which contains the lock
protection.

Rename it to should_split_large_page() while at it so the return values make
actually sense.

Clean up the code flow, comments and general whitespace damage while at it. No
functional change.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143545.830507216@linutronix.deSigned-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 2a25dc7c79c92c6cba45c6218c49395173be80bf upstream.

The sequence of marking text and rodata read-only in 32bit init is:

  set_ro(text);
  kernel_set_to_readonly = 1;
  set_ro(rodata);

When kernel_set_to_readonly is 1 it enables the protection mechanism in CPA
for the read only regions. With the upcoming checks for existing mappings
this consequently triggers the warning about an existing mapping being
incorrect vs. static protections because rodata has not been converted yet.

There is no technical reason to split the two, so just combine the RO
protection to convert text and rodata in one go.

Convert the printks to pr_info while at it.
Reported-by: Nkernel test robot <rong.a.chen@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDave Hansen <dave.hansen@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Bin Yang <bin.yang@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Link: https://lkml.kernel.org/r/20180917143545.731701535@linutronix.deSigned-off-by: NShile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 0be0bfd2de9dfdd2098a9c5b14bdd8f739c9165d upstream.

Once upon a time, commit 2cac0c00 ("ovl: get exclusive ownership on
upper/work dirs") in v4.13 added some sanity checks on overlayfs layers.
This change caused a docker regression. The root cause was mount leaks
by docker, which as far as I know, still exist.

To mitigate the regression, commit 85fdee1e ("ovl: fix regression
caused by exclusive upper/work dir protection") in v4.14 turned the
mount errors into warnings for the default index=off configuration.

Recently, commit 146d62e5a586 ("ovl: detect overlapping layers") in
v5.2, re-introduced exclusive upper/work dir checks regardless of
index=off configuration.

This changes the status quo and mount leak related bug reports have
started to re-surface. Restore the status quo to fix the regressions.
To clarify, index=off does NOT relax overlapping layers check for this
ovelayfs mount. index=off only relaxes exclusive upper/work dir checks
with another overlayfs mount.

To cover the part of overlapping layers detection that used the
exclusive upper/work dir checks to detect overlap with self upper/work
dir, add a trap also on the work base dir.

Link: https://github.com/moby/moby/issues/34672
Link: https://lore.kernel.org/linux-fsdevel/20171006121405.GA32700@veci.piliscsaba.szeredi.hu/
Link: https://github.com/containers/libpod/issues/3540
Fixes: 146d62e5a586 ("ovl: detect overlapping layers")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Tested-by: NColin Walters <walters@verbum.org>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 86d333a8cc7f66c2314ab1e147834a1cd95ec2de upstream

Expose base_frequency to user space via cpufreq sysfs when HWP is in
use.

This HWP base frequency is read from the ACPI _CPC object if present,
or from the HWP Capabilities MSR otherwise.

On the majority of the HWP platforms the _CPC object will point to
the HWP Capabilities MSR using the "Functional Fixed Hardware"
address space type.  The address space type also can simply be
ACPI_TYPE_INTEGER, however, in which case the platform firmware
can set its value at the initialization time based on the system
constraints.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog ]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 29523f095397637edca60c627bc3e5c25a02c40f upstream

The Continuous Performance Control package may contain an optional
guaranteed performance field.

Add support to read guaranteed performance from _CPC.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 0b774629512057b4becc705e2495220844e6e795 upstream.

AVX512 BFLOAT16 instructions support 16-bit BFLOAT16 floating-point
format (BF16) for deep learning optimization.

Intel adds AVX512 BFLOAT16 feature in CooperLake, which is CPUID.7.1.EAX[5].

Detailed information of the CPUID bit can be found here,
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf.
Signed-off-by: NJing Liu <jing2.liu@linux.intel.com>
[Fix type mismatch in min, changing constant "1" to "1u". - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLin Wang <lin.x.wang@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 60cec433c485564bd7caac38a9df5c1ed79ee560 upstream.

The has_leaf_count member was originally added for KVM's paravirtualization
CPUID leaves.  However, since then the leaf count _has_ been added to those
leaves as well, so we can drop that special case.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLin Wang <lin.x.wang@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 50a9e1a4b1dece60fd79ecdee25db01274a7f291 upstream.

do_cpuid_1_ent does not do the entire processing for a CPUID entry, it
only retrieves the host's values.  Rename it to match reality.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLin Wang <lin.x.wang@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit d9aadaf689928ba896529cb684729923b21c2de5 upstream.

do_cpuid_1_ent is typically called in two places by __do_cpuid_func
for CPUID functions that have subleafs.  Both places have to set
the KVM_CPUID_FLAG_SIGNIFCANT_INDEX.  Set that flag, and
KVM_CPUID_FLAG_STATEFUL_FUNC as well, directly in do_cpuid_1_ent.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLin Wang <lin.x.wang@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 54d360d41211006437bebf97513394693bd32623 upstream.

CPUID function 7 has multiple subleafs.  Instead of having nested
switch statements, move the logic to filter supported features to
a separate function, and call it for each subleaf.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLin Wang <lin.x.wang@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit ab8bcf64971180e1344ce2c7e70c49b0f24f6b0d upstream.

Rename it as well as __do_cpuid_ent and __do_cpuid_ent_emulated to have
"func" in its name, and drop the index parameter which is always 0.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLin Wang <lin.x.wang@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit b302e4b176d00e1cbc80148c5d0aee36751f7480 upstream.

AVX512 BFLOAT16 instructions support 16-bit BFLOAT16 floating-point
format (BF16) for deep learning optimization.

BF16 is a short version of 32-bit single-precision floating-point
format (FP32) and has several advantages over 16-bit half-precision
floating-point format (FP16). BF16 keeps FP32 accumulation after
multiplication without loss of precision, offers more than enough
range for deep learning training tasks, and doesn't need to handle
hardware exception.

AVX512 BFLOAT16 instructions are enumerated in CPUID.7.1:EAX[bit 5]
AVX512_BF16.

CPUID.7.1:EAX contains only feature bits. Reuse the currently empty
word 12 as a pure features word to hold the feature bits including
AVX512_BF16.

Detailed information of the CPUID bit and AVX512 BFLOAT16 instructions
can be found in the latest Intel Architecture Instruction Set Extensions
and Future Features Programming Reference.

 [ bp: Check CPUID(7) subleaf validity before accessing subleaf 1. ]
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: "Chang S. Bae" <chang.seok.bae@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <namit@vmware.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: "Ravi V Shankar" <ravi.v.shankar@intel.com>
Cc: Robert Hoo <robert.hu@linux.intel.com>
Cc: "Sean J Christopherson" <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: x86 <x86@kernel.org>
Link: https://lkml.kernel.org/r/1560794416-217638-3-git-send-email-fenghua.yu@intel.comSigned-off-by: NLin Wang <lin.x.wang@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 6b476662b09c393936e0f62c97ad9988d410fd36 upstream

It took me a while to notice the bug where the adiantum template left
crypto_spawn::inst == NULL, because this only caused problems in certain
cases where algorithms are dynamically loaded/unloaded.

More improvements are needed, but for now make crypto_init_spawn()
reject this case and WARN(), so this type of bug will be noticed
immediately in the future.

Note: I checked all callers and the adiantum template was the only place
that had this wrong.  So this WARN shouldn't trigger anymore.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: Nluanshi <zhangliguang@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 80424b02d42bb22f8ff8839cb93a84ade53b39c0 upstream

The current implementation of efi_mem_reserve_persistent() is rather
naive, in the sense that for each invocation, it creates a separate
linked list entry to describe the reservation. Since the linked list
entries themselves need to persist across subsequent kexec reboots,
every reservation created this way results in two memblock_reserve()
calls at the next boot.

On arm64 systems with 100s of CPUs, this may result in a excessive
number of memblock reservations, and needless fragmentation.

So instead, make use of the newly updated struct linux_efi_memreserve
layout to put multiple reservations into a single linked list entry.
This should get rid of the numerous tiny memblock reservations, and
effectively cut the total number of reservations in half on arm64
systems with many CPUs.

 [ mingo: build warning fix. ]
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-11-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 5f0b0ecf043a5319e729c11a53bc8294df12dab3 upstream

In preparation of updating efi_mem_reserve_persistent() to cause less
fragmentation when dealing with many persistent reservations, update
the struct definition and the code that handles it currently so it
can describe an arbitrary number of reservations using a single linked
list entry. The actual optimization will be implemented in a subsequent
patch.
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-10-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 976b489120cdab2b1b3a41ffa14661db43d58190 upstream

Mapping the MEMRESERVE EFI configuration table from an early initcall
is too late: the GICv3 ITS code that creates persistent reservations
for the boot CPU's LPI tables is invoked from init_IRQ(), which runs
much earlier than the handling of the initcalls. This results in a
WARN() splat because the LPI tables cannot be reserved persistently,
which will result in silent memory corruption after a kexec reboot.

So instead, invoke the initialization performed by the initcall from
efi_mem_reserve_persistent() itself as well, but keep the initcall so
that the init is guaranteed to have been called before SMP boot.
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NJan Glauber <jglauber@cavium.com>
Tested-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 63eb322d89c8 ("efi: Permit calling efi_mem_reserve_persistent() ...")
Link: http://lkml.kernel.org/r/20181123215132.7951-2-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 63eb322d89c8505af9b4a3d703e85e42281ebaa0 upstream

Currently, efi_mem_reserve_persistent() may not be called from atomic
context, since both the kmalloc() call and the memremap() call may
sleep.

The kmalloc() call is easy enough to fix, but the memremap() call
needs to be moved into an init hook since we cannot control the
memory allocation behavior of memremap() at the call site.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181114175544.12860-6-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit b844470f22061e8cd646cb355e85d2f518b2c913 upstream

Installing UEFI configuration tables can only be done before calling
ExitBootServices(), so if we want to use the new MEMRESRVE config table
from the kernel proper, we need to install a dummy entry from the stub.
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit a23d3bb05ccbd815c79293d2207fedede0b3515d upstream

Add kernel plumbing to reserve memory regions persistently on a EFI
system by adding entries to the MEMRESERVE linked list.
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 71e0940d52e107748b270213a01d3b1546657d74 upstream

In order to allow the OS to reserve memory persistently across a
kexec, introduce a Linux-specific UEFI configuration table that
points to the head of a linked list in memory, allowing each kernel
to add list items describing memory regions that the next kernel
should treat as reserved.

This is useful, e.g., for GICv3 based ARM systems that cannot disable
DMA access to the LPI tables, forcing them to reuse the same memory
region again after a kexec reboot.
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

It is wrong for using stack variable to store the current code sets an
affinity hint, it will cause a panic or returning corrupt data.

So this patch moves the mask local variable into hinic_rq struct
to avoid this situation.

Backtrace:
Internal error: Oops: 96000007 [#1] SMP
Process irqbalance (pid: 1464, stack limit = 0x000000009bc2bec4)
CPU: 35 PID: 1464 Comm: irqbalance Tainted: G        W
pstate: 00400089 (nzcv daIf +PAN -UAO)
pc : __memcpy+0x44/0x180
lr : irq_affinity_hint_proc_show+0x9c/0x100
sp : ffff00002cb7bb60
x29: ffff00002cb7bb60 x28: 0000ffff9f6d9000
x27: ffff803f27cef9c0 x26: ffff00002cb7be30
x25: 0000000000000400 x24: ffff803f290e7000
x23: 0000000000000000 x22: ffff803f27cef980
x21: ffff000009009000 x20: ffff802fb9f01000
x19: ffff00002cb7bba8 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000
x9 : 0000000000000000 x8 : 0000000000000000
x7 : 0000000000000000 x6 : ffff00002cb7bba8
x5 : ffff802fb9f01000 x4 : 0000000000000008
x3 : ffff802fb9f01194 x2 : 0000000000000078
x1 : ffff000027d2b8b8 x0 : ffff00002cb7bba8
Call trace:
	__memcpy+0x44/0x180
	seq_read+0x1b4/0x45c
	proc_reg_read+0x7c/0xb8
	__vfs_read+0x58/0x190
	vfs_read+0x94/0x154
	ksys_read+0x68/0xd8
	__arm64_sys_read+0x28/0x34
	el0_svc_common+0xe8/0x19c
	el0_svc_handler+0x78/0x94
	el0_svc+0x8/0xc
Code: 36100064 b8404423 b80044c3 36180064 (f8408423)

---[ end trace b2cae62a9c2d153f ]---
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 56131d6d8638b7cb6feee67a8794b3dfa626396e upstream

The SPI clock frequency of Designware IP for Hisilicon Hip08 is 250M.

The ACPI ID used is "HISI0173".
Signed-off-by: NJay Fang <f.fangjian@huawei.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 58bf437ff64eac8aca606e42d7e4623e40b61fa1 upstream

The commit 539aee0e ("KVM: arm64: Share the parts of
get/set events useful to 32bit") shares the get/set events
helper for arm64 and arm32, but forgot to share the cap
extension code.

User space will check whether KVM supports vcpu events by
checking the KVM_CAP_VCPU_EVENTS extension
Acked-by: NJames Morse <james.morse@arm.com>
Reviewed-by : Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NDongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 32215a6c6beb8dcda4bb0759b04ce3c30927963b upstream

The Hisilicon Hip08 platform, that uses ACPI, has this controller.
Let's add ACPI support for DW SPI MMIO-based host.

The ACPI ID used is "HISI0173" for the Designware SPI controller of
Hisilicon Hip08 platform.
Signed-off-by: NJay Fang <f.fangjian@huawei.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 375bdd3b5d4f7cf146f0df1488b4671b141dd799 upstream

Rename kvm_arch_dev_ioctl_check_extension() to
kvm_arch_vm_ioctl_check_extension(), because it does
not have any relationship with device.

Renaming this function can make code readable.

Cc: James Morse <james.morse@arm.com>
Reviewed-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NDongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 1757d05f3112acc5c0cdbcccad3afdee99655bf9 upstream

This patch add a helper to get the value of desired performance
register.
Signed-off-by: NXiongfeng Wang <wangxiongfeng2@huawei.com>
[ rjw: More white space ]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 6c8d750f9784cef32a8cffdad74c8a351b4ca3a6 upstream

Hisilicon chips do not support delivered performance counter register
and reference performance counter register. But the platform can
calculate the real performance using its own method. We reuse the
desired performance register to store the real performance calculated by
the platform. After the platform finished the frequency adjust, it gets
the real performance and writes it into desired performance register. Os
can use it to calculate the real frequency.
Signed-off-by: NXiongfeng Wang <wangxiongfeng2@huawei.com>
[ rjw: Drop unnecessary braces ]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 5e2c9f9a627772672accd80fa15359c0de6aa894 upstream

If the LPI tables have been reserved with the EFI reservation
mechanism, we assume that these tables are safe to use even
when we find the redistributors to have LPIs enabled at
boot time, meaning that kexec can now work with GICv3.

You're welcome.
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Tested-by: NBhupesh Sharma <bhsharma@redhat.com>
Tested-by: NLei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 3fb68faee8676900f896d1615442aeca36e5f940 upstream

Upon enabling a redistributor, let's register the allocated tables
with the EFI table that tracks the memory reservations.
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Tested-by: NBhupesh Sharma <bhsharma@redhat.com>
Tested-by: NLei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit f842ca8e9c8a80d07f5589536311250d7d6018f9 upstream

If booting with LPIs enabled, all the redistributors must have the
exact same property table. No ifs, no buts.
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Tested-by: NBhupesh Sharma <bhsharma@redhat.com>
Tested-by: NLei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit c6e2ccb66d0c3b4fffc59932585e9f709ad59003 upstream

If using a kdump kernel, and that we cannot disable LPIs to install
our own tables, let's switch to using the already allocated tables.

This means that we'll change some of the initial kernel's memory,
but at least we'll be able to have LPIs in this secondary kernel.
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Tested-by: NBhupesh Sharma <bhsharma@redhat.com>
Tested-by: NLei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit c440a9d9d113b9b3cd99bb5096c4aa47d515e463 upstream

In order to cope with kexec and GICv3, let's try and spot when
we're booting with LPIs already enabled, and the tables already
programmed into the redistributors.

This code is currently guarded by a predicate that is always false,
meaning this is not functionnal just yet.
Reviewed-by: NJulien Thierry <julien.thierry@arm.com>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Tested-by: NBhupesh Sharma <bhsharma@redhat.com>
Tested-by: NLei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit e1a2e2010ba9d3c765b2e37a7ae8b332564716f1 upstream

We're currently only tracking the page allocated to contain the
property table by its struct page. In the future, it is going to
be convenient to track both PA and VA for that page instead. Let's
do that.
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Tested-by: NBhupesh Sharma <bhsharma@redhat.com>
Tested-by: NLei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>

commit 11e37d357f6ba7a9af850a872396082cc0a0001f upstream

Pending tables for the redistributors are currently allocated
one at a time as each CPU boots. This is causing some grief
for Linux/RT (allocation from within a CPU hotplug notifier is
frown upon).

Let's move this allocation to take place at init time, when we
only have a single CPU. It means we're allocating memory for CPUs
that are not online yet, but most system will boot all of their
CPUs anyway, so that's not completely wasted.
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Tested-by: NBhupesh Sharma <bhsharma@redhat.com>
Tested-by: NLei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NZou Cao <zoucao@linux.alibaba.com>
Reviewed-by: NBaoyou Xie <xie.baoyou@linux.alibaba.com>