- 19 10月, 2005 22 次提交
-
-
由 Trond Myklebust 提交于
-
由 Trond Myklebust 提交于
If someone tries to rename a directory onto an empty directory, we currently fail and return EBUSY. This patch ensures that we try the rename if both source and target are directories, and that we fail with a correct error of EISDIR if the source is not a directory. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We currently fail Connectathon test 6.10 in the case of 32-bit locks due to incorrect error checking. Also add support for l->l_len < 0 to 64-bit locks. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If the server is in the unconfirmed OPEN state for a given open owner and receives a second OPEN for the same open owner, it will cancel the state of the first request and set up an OPEN_CONFIRM for the second. This can cause a race that is discussed in rfc3530 on page 181. The following patch allows the client to recover by retrying the original open request. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Unless of course the open fails due to permission issues. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This will allow nfs_permission() to perform additional optimizations when walking the path, by folding the ACCESS(MAY_EXEC) call on the directory into the lookup revalidation. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Since it appears that some servers don't... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Make NFSv4 return the fully initialized file pointer with the stateid that it created in the lookup w/intent. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This is needed by NFSv4 for atomicity reasons: our open command is in fact a lookup+open, so we need to be able to propagate open context information from lookup() into the resulting struct file's private_data field. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
...and fix a memory corruption bug due to improper use of memcpy() on a struct file_lock. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Currently we fail to do so if the process was signalled. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We no longer need to worry about collisions between close() and the state recovery code, since the new close will automatically recheck the file state once it is done waiting on its sequence slot. Ditto for the nfs4_proc_locku() procedure. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
OPEN, CLOSE, etc no longer need these semaphores to ensure ordering of requests. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Once the state_owner and lock_owner semaphores get removed, it will be possible for other OPEN requests to reopen the same file if they have lower sequence ids than our CLOSE call. This patch ensures that we recheck the file state once nfs_wait_on_sequence() has completed waiting. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
NFSv4 file state-changing functions such as OPEN, CLOSE, LOCK,... are all labelled with "sequence identifiers" in order to prevent the server from reordering RPC requests, as this could cause its file state to become out of sync with the client. Currently the NFS client code enforces this ordering locally using semaphores to restrict access to structures until the RPC call is done. This, of course, only works with synchronous RPC calls, since the user process must first grab the semaphore. By dropping semaphores, and instead teaching the RPC engine to hold the RPC calls until they are ready to be sent, we can extend this process to work nicely with asynchronous RPC calls too. This patch adds a new list called "rpc_sequence" that defines the order of the RPC calls to be sent. We add one such list for each state_owner. When an RPC call is ready to be sent, it checks if it is top of the rpc_sequence list. If so, it proceeds. If not, it goes back to sleep, and loops until it hits top of the list. Once the RPC call has completed, it can then bump the sequence id counter, and remove itself from the rpc_sequence list, and then wake up the next sleeper. Note that the state_owner sequence ids and lock_owner sequence ids are all indexed to the same rpc_sequence list, so OPEN, LOCK,... requests are all ordered w.r.t. each other. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Currently, call_encode will cause the entire RPC call to abort if it returns an error. This is unnecessarily rigid, and gets in the way of attempts to allow the NFSv4 layer to order RPC calls that carry sequence ids. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
After a server crash/reboot, rebinding should always retry, otherwise requests on "hard" mounts will fail when they shouldn't. Test plan: Run a lock-intensive workload against a server while rebooting the server repeatedly. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
-
- 18 10月, 2005 18 次提交
-
-
由 Antonino A. Daplas 提交于
Reported by: Bob Tracy <rct@gherkin.frus.com> "...I've got a Toshiba notebook (730XCDT -- Pentium 150MMX) for which I'm using the Vesa FB driver. When the machine has been idle for some time and the driver attempts to powerdown the display, rather than the display going blank, it goes gray with several strange lines. When I hit the "shift" key or other-wise wake up the display, the old video state is not fully restored..." vesafb recently added a blank method which has only 2 states, powerup and powerdown. The powerdown state is used for all blanking levels, but in his case, powerdown does not work correctly for higher levels of display powersaving. Thus, for intermediate power levels, use software blanking, and use only hardware blanking for an explicit powerdown. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
This still leaves driver and architecture-specific subdirectories alone, but gets rid of the bulk of the "generic" generated files that we should ignore. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kenneth Tan 提交于
Patch from Kenneth Tan The get_irqnr_and_base subroutine of ixp4xx does not take interrupt 0 condition into account properly. We should not perform "subs" here. The Z flag will be set when interrupt 0 occur, which resulting "movne r1, sp" in the caller routine (irq_handler) not being executed. When interrupt 0 occur: o if CONFIG_CPU_IXP46X is not set, "subs" will set the Z flag and return o if CONFIG_CPU_IXP46X is set, codes in upper interrupt handling will be trigerred. But since this is not supper interrupt, the "cmp" in the upper interrupt handling portion will set the Z flag and return Signed-off-by: NKenneth Tan <chong.yin.tan@intel.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Kenneth Tan 提交于
Patch from Kenneth Tan The cpu_is_ixp465 macro in include/asm-arm/arch-ixp4xx/hardware.h is always returning 0 because #ifdef CONFIG_CPU_IXP465 is always false. Signed-off-by: NKenneth Tan <chong.yin.tan@intel.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Check that the device we are looking at is really a platform device before trying to cast it to one to find out the platform bus number. Thanks to RMK for pointing this out. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mark Rustad 提交于
The following build error happens with 2.6.14-rc4 when CONFIG_KALLSYMS is not defined. The error message in a fragment of the output was: CC arch/i386/lib/usercopy.o AR arch/i386/lib/lib.a /bin/sh: line 1: +@: command not found make[3]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. CHK include/linux/compile.h Signed-off-by: NMark Rustad <mrustad@mac.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Zach Brown 提交于
lock_kiocb() was introduced to serialize retrying and cancellation. In the process of doing so it tried to sleep waiting for KIF_LOCKED while holding the ctx_lock spinlock. Recent fixes have ensured that multiple concurrent retries won't be attempted for a given iocb. Cancel has other problems and has no significant in-tree users that have been complaining about it. So for the immediate future we'll revert sleeping with the lock held and will address proper cancellation and retry serialization in the future. Signed-off-by: NZach Brown <zach.brown@oracle.com> Acked-by: NBenjamin LaHaise <bcrl@kvack.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dmitry Torokhov 提交于
Only signal completion after marking request slot as free, otherwise other processor can free request structure before we finish using it. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
Fix -EIO on /proc/acpi/events after suspends. This actually breaks suspending by power button in many setups. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Stephan Brodkorb 提交于
Since Revision 1.10 was released the n_r3964 module wasn't able to receive any data. The reason for that behavior is because there were some wrong calls of mod_timer(...) in the function receive_char (...). This patch should fix this problem and was successfully tested with talking to some kuka industrial robots. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David McCullough 提交于
Currently you do not get all the map entries on nommu systems because the start function doesn't index into the list using the value of "pos". Signed-off-by: NDavid McCullough <davidm@snapgear.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric Dumazet 提交于
This makes call_rcu() keep track of how many events there are on the RCU list, and cause a reschedule event when the list gets too long. This helps keep RCU event lists down. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Garzik 提交于
This change makes quirk_intel_ide_combined() dependent on the precise conditions under which it is needed: * IDE is built in * IDE SATA option is not set * ata_piix or ahci drivers are enabled This fixes an issue where some modular configurations would not cause the quirk to be enabled. Signed-off-by: NJeff Garzik <jgarzik@pobox.com> Signed-off-by: NLinus torvalds <torvalds@osdl.org>
-
由 Oleg Nesterov 提交于
Make sure we release the task struct properly when releasing pending timers. release_task() does write_lock_irq(&tasklist_lock), so it can't race with run_posix_cpu_timers() on any cpu. Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Trond Myklebust 提交于
Oopsable since nfs_wait_on_inode() can get called as part of iput_final(). Unnecessary since the caller had better be damned sure that the inode won't disappear from underneath it anyway. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-