Instead of repeatedly locking and unlocking css_set_rwsem inside
cgroup_task_migrate(), update cgroup_attach_task() to grab it outside
of the loop and update cgroup_task_migrate() to use
put_css_set_locked().
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

put_css_set() is performed in two steps - it first tries to put
without grabbing css_set_rwsem if such put wouldn't make the count
zero.  If that fails, it puts after write-locking css_set_rwsem.  This
patch separates out the second phase into put_css_set_locked() which
should be called with css_set_rwsem locked.

Also, put_css_set_taskexit() is droped and put_css_set() is made to
take @taskexit.  There are only a handful users of these functions.
No point in providing different variants.

put_css_locked() will be used by later changes.  This patch doesn't
introduce any functional changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

css_scan_tasks() doesn't have any user left.  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Now that css_task_iter_start/next_end() supports blocking while
iterating, there's no reason to use css_scan_tasks() which is more
cumbersome to use and scheduled to be removed.

Convert all css_scan_tasks() usages in cpuset to
css_task_iter_start/next/end().  This simplifies the code by removing
heap allocation and callbacks.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently there are two ways to walk tasks of a cgroup -
css_task_iter_start/next/end() and css_scan_tasks().  The latter
builds on the former but allows blocking while iterating.
Unfortunately, the way css_scan_tasks() is implemented is rather
nasty, it uses a priority heap of pointers to extract some number of
tasks in task creation order and loops over them invoking the callback
and repeats that until it reaches the end.  It requires either
preallocated heap or may fail under memory pressure, while unlikely to
be problematic, the complexity is O(N^2), and in general just nasty.

We're gonna convert all css_scan_users() to
css_task_iter_start/next/end() and remove css_scan_users().  As
css_scan_tasks() users may block, let's convert css_set_lock to a
rwsem so that tasks can block during css_task_iter_*() is in progress.

While this does increase the chance of possible deadlock scenarios,
given the current usage, the probability is relatively low, and even
if that happens, the right thing to do is updating the iteration in
the similar way to css iterators so that it can handle blocking.

Most conversions are trivial; however, task_cgroup_path() now expects
to be called with css_set_rwsem locked instead of locking itself.
This is because the function is called with RCU read lock held and
rwsem locking should nest outside RCU read lock.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Reimplement cgroup_transfer_tasks() so that it repeatedly fetches the
first task in the cgroup and then tranfers it.  This achieves the same
result without using css_scan_tasks() which is scheduled to be
removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup_task_count() read-locks css_set_lock and walks all tasks to
count them and then returns the result.  The only thing all the users
want is determining whether the cgroup is empty or not.  This patch
implements cgroup_has_tasks() which tests whether cgroup->cset_links
is empty, replaces all cgroup_task_count() usages and unexports it.

Note that the test isn't synchronized.  This is the same as before.
The test has always been racy.

This will help planned css_set locking update.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>

Move it above so that prototype isn't necessary.  Let's also move the
definition of use_task_css_set_links next to it.

This is purely cosmetic.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Tasks are not linked on their css_sets until cgroup task iteration is
actually used.  This is to avoid incurring overhead on the fork and
exit paths for systems which have cgroup compiled in but don't use it.
     
This lazy binding also affects the task migration path.  It has to be
careful so that it doesn't link tasks to css_sets when task_cg_lists
linking is not enabled yet.  Unfortunately, this conditional linking
in the migration path interferes with planned migration updates.

This patch moves the lazy binding a bit earlier, to the first cgroup
mount.  It's a clear indication that cgroup is being used on the
system and task_cg_lists linking is highly likely to be enabled soon
anyway through "tasks" and "cgroup.procs" files.

This allows cgroup_task_migrate() to always link @tsk->cg_list.  Note
that it may still race with cgroup_post_fork() but who wins that race
is inconsequential.

While at it, make use_task_css_set_links a bool, add sanity checks in
cgroup_enable_task_cg_lists() and css_task_iter_start(), and update
the former so that it's guaranteed and assumes to run only once.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Before kernfs conversion, due to the way super_block lookup works,
cgroup roots were created and made visible before being fully
initialized.  This in turn required a special flag to mark that the
root hasn't been fully initialized so that the destruction path can
tell fully bound ones from half initialized.

That flag is CGRP_ROOT_SUBSYS_BOUND and no longer necessary after the
kernfs conversion as the lookup and creation of new root are atomic
w.r.t. cgroup_mutex.  This patch removes the flag and passes the
requests subsystem mask to cgroup_setup_root() so that it can set the
respective mask bits as subsystems are bound.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Disallow more mount options if sane_behavior.  Note that xattr used to
generate warning.

While at it, simplify option check in cgroup_mount() and update
sane_behavior comment in cgroup.h.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

This was being included implicitly via cgroup.h's inclusion of xattr.h
(which has now been removed).
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NTejun Heo <tj@kernel.org>

Currently, cgroupfs_root and its ->top_cgroup are separated reference
counted and the latter's is ignored.  There's no reason to do this
separately.  This patch removes cgroupfs_root->refcnt and destroys
cgroupfs_root when the top_cgroup is released.

* cgroup_put() updated to ignore cgroup_is_dead() test for top
  cgroups.  cgroup_free_fn() updated to handle root destruction when
  releasing a top cgroup.

* As root destruction is now bounced through cgroup destruction, it is
  asynchronous.  Update cgroup_mount() so that it waits for pending
  release which is currently implemented using msleep().  Converting
  this to proper wait_queue isn't hard but likely unnecessary.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

root->number_of_cgroups is currently an integer protected with
cgroup_mutex.  Except for sanity checks and proc reporting, the only
place it's used is to check whether the root has any child during
remount; however, this is a bit flawed as the counter is not
decremented when the cgroup is unlinked but when it's released,
meaning that there could be an extended period where all cgroups are
removed but remount is still not allowed because some internal objects
are lingering.  While not perfect either, it'd be better to use
emptiness test on root->top_cgroup.children.

This patch updates cgroup_remount() to test top_cgroup's children
instead, which makes number_of_cgroups only actual usage statistics
printing in proc implemented in proc_cgroupstats_show().  Let's
shorten its name and make it an atomic_t so that we don't have to
worry about its synchronization.  It's purely auxiliary at this point.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup->name handling became quite complicated over time involving
dedicated struct cgroup_name for RCU protection.  Now that cgroup is
on kernfs, we can drop all of it and simply use kernfs_name/path() and
friends.  Replace cgroup->name and all related code with kernfs
name/path constructs.

* Reimplement cgroup_name() and cgroup_path() as thin wrappers on top
  of kernfs counterparts, which involves semantic changes.
  pr_cont_cgroup_name() and pr_cont_cgroup_path() added.

* cgroup->name handling dropped from cgroup_rename().

* All users of cgroup_name/path() updated to the new semantics.  Users
  which were formatting the string just to printk them are converted
  to use pr_cont_cgroup_name/path() instead, which simplifies things
  quite a bit.  As cgroup_name() no longer requires RCU read lock
  around it, RCU lockings which were protecting only cgroup_name() are
  removed.

v2: Comment above oom_info_lock updated as suggested by Michal.

v3: dummy_top doesn't have a kn associated and
    pr_cont_cgroup_name/path() ended up calling the matching kernfs
    functions with NULL kn leading to oops.  Test for NULL kn and
    print "/" if so.  This issue was reported by Fengguang Wu.

v4: Rebased on top of 0ab02ca8 ("cgroup: protect modifications to
    cgroup_idr with cgroup_mutex").
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>

cgroup currently releases its kernfs_node when it gets removed.  While
not buggy, this makes cgroup->kn access rules complicated than
necessary and leads to things like get/put protection around
kernfs_remove() in cgroup_destroy_locked().  In addition, we want to
use kernfs_name/path() and friends but also want to be able to
determine a cgroup's name between removal and release.

This patch makes cgroup hold onto its kernfs_node until freed so that
cgroup->kn is always accessible.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Dynamic cftype addition and removal using cgroup_add/rm_cftypes()
respectively has been quite hairy due to vfs i_mutex.  As i_mutex
nests outside cgroup_mutex, cgroup_mutex has to be released and
regrabbed on each iteration through the hierarchy complicating the
process.  Now that i_mutex is no longer in play, it can be simplified.

* Just holding cgroup_tree_mutex is enough.  No need to meddle with
  cgroup_mutex.

* No reason to play the unlock - relock - check serial_nr dancing.
  Everything can be atomically while holding cgroup_tree_mutex.

* cgroup_cfts_prepare() is replaced with direct locking of
  cgroup_tree_mutex.

* cgroup_cfts_commit() no longer fiddles with locking.  It just
  applies the cftypes change to the existing cgroups in the hierarchy.
  Renamed to cgroup_cfts_apply().
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cftype_set was added primarily to allow registering the same cftype
array more than once for different subsystems.  Nobody uses or needs
such thing and it's already broken because each cftype has ->ss
pointer which is initialized during registration.

Let's add list_head ->node to cftype and use the first cftype entry in
the array to link them instead of allocating separate cftype_set.
While at it, trigger WARN if cft seems previously initialized during
registration.

This simplifies cftype handling a bit.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cftype handling is about to be revamped.  Relocate cgroup_rm_cftypes()
above cgroup_add_cftypes() in preparation.  This is pure relocation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Mount option "xattr" is no longer necessary as it's enabled by default
on kernfs.  Warn if "xattr" is specified with "sane_behavior" so that
the option can be removed in the future.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup filesystem code was derived from the original sysfs
implementation which was heavily intertwined with vfs objects and
locking with the goal of re-using the existing vfs infrastructure.
That experiment turned out rather disastrous and sysfs switched, a
long time ago, to distributed filesystem model where a separate
representation is maintained which is queried by vfs.  Unfortunately,
cgroup stuck with the failed experiment all these years and
accumulated even more problems over time.

Locking and object lifetime management being entangled with vfs is
probably the most egregious.  vfs is never designed to be misused like
this and cgroup ends up jumping through various convoluted dancing to
make things work.  Even then, operations across multiple cgroups can't
be done safely as it'll deadlock with rename locking.

Recently, kernfs is separated out from sysfs so that it can be used by
users other than sysfs.  This patch converts cgroup to use kernfs,
which will bring the following benefits.

* Separation from vfs internals.  Locking and object lifetime
  management is contained in cgroup proper making things a lot
  simpler.  This removes significant amount of locking convolutions,
  hairy object lifetime rules and the restriction on multi-cgroup
  operations.

* Can drop a lot of code to implement filesystem interface as most are
  provided by kernfs.

* Proper "severing" semantics, which allows controllers to not worry
  about lingering file accesses after offline.

While the preceding patches did as much as possible to make the
transition less painful, large part of the conversion has to be one
discrete step making this patch rather large.  The rest of the commit
message lists notable changes in different areas.

Overall
-------

* vfs constructs replaced with kernfs ones.  cgroup->dentry w/ ->kn,
  cgroupfs_root->sb w/ ->kf_root.

* All dentry accessors are removed.  Helpers to map from kernfs
  constructs are added.

* All vfs plumbing around dentry, inode and bdi removed.

* cgroup_mount() now directly looks for matching root and then
  proceeds to create a new one if not found.

Synchronization and object lifetime
-----------------------------------

* vfs inode locking removed.  Among other things, this removes the
  need for the convolution in cgroup_cfts_commit().  Future patches
  will further simplify it.

* vfs refcnting replaced with cgroup internal ones.  cgroup->refcnt,
  cgroupfs_root->refcnt added.  cgroup_put_root() now directly puts
  root->refcnt and when it reaches zero proceeds to destroy it thus
  merging cgroup_put_root() and the former cgroup_kill_sb().
  Simliarly, cgroup_put() now directly schedules cgroup_free_rcu()
  when refcnt reaches zero.

* Unlike before, kernfs objects don't hold onto cgroup objects.  When
  cgroup destroys a kernfs node, all existing operations are drained
  and the association is broken immediately.  The same for
  cgroupfs_roots and mounts.

* All operations which come through kernfs guarantee that the
  associated cgroup is and stays valid for the duration of operation;
  however, there are two paths which need to find out the associated
  cgroup from dentry without going through kernfs -
  css_tryget_from_dir() and cgroupstats_build().  For these two,
  kernfs_node->priv is RCU managed so that they can dereference it
  under RCU read lock.

File and directory handling
---------------------------

* File and directory operations converted to kernfs_ops and
  kernfs_syscall_ops.

* xattrs is implicitly supported by kernfs.  No need to worry about it
  from cgroup.  This means that "xattr" mount option is no longer
  necessary.  A future patch will add a deprecated warning message
  when sane_behavior.

* When cftype->max_write_len > PAGE_SIZE, it's necessary to make a
  private copy of one of the kernfs_ops to set its atomic_write_len.
  cftype->kf_ops is added and cgroup_init/exit_cftypes() are updated
  to handle it.

* cftype->lockdep_key added so that kernfs lockdep annotation can be
  per cftype.

* Inidividual file entries and open states are now managed by kernfs.
  No need to worry about them from cgroup.  cfent, cgroup_open_file
  and their friends are removed.

* kernfs_nodes are created deactivated and kernfs_activate()
  invocations added to places where creation of new nodes are
  committed.

* cgroup_rmdir() uses kernfs_[un]break_active_protection() for
  self-removal.

v2: - Li pointed out in an earlier patch that specifying "name="
      during mount without subsystem specification should succeed if
      there's an existing hierarchy with a matching name although it
      should fail with -EINVAL if a new hierarchy should be created.
      Prior to the conversion, this used by handled by deferring
      failure from NULL return from cgroup_root_from_opts(), which was
      necessary because root was being created before checking for
      existing ones.  Note that cgroup_root_from_opts() returned an
      ERR_PTR() value for error conditions which require immediate
      mount failure.

      As we now have separate search and creation steps, deferring
      failure from cgroup_root_from_opts() is no longer necessary.
      cgroup_root_from_opts() is updated to always return ERR_PTR()
      value on failure.

    - The logic to match existing roots is updated so that a mount
      attempt with a matching name but different subsys_mask are
      rejected.  This was handled by a separate matching loop under
      the comment "Check for name clashes with existing mounts" but
      got lost during conversion.  Merge the check into the main
      search loop.

    - Add __rcu __force casting in RCU_INIT_POINTER() in
      cgroup_destroy_locked() to avoid the sparse address space
      warning reported by kbuild test bot.  Maybe we want an explicit
      interface to use kn->priv as RCU protected pointer?

v3: Make CONFIG_CGROUPS select CONFIG_KERNFS.

v4: Rebased on top of 0ab02ca8 ("cgroup: protect modifications to
    cgroup_idr with cgroup_mutex").
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: kbuild test robot fengguang.wu@intel.com>

Relocate cgroup_init/exit_root_id(), cgroup_free_root(),
cgroup_kill_sb() and cgroup_file_name() in preparation of kernfs
conversion.

These are pure relocations to make kernfs conversion easier to follow.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

* Un-inline seq_css().  After kernfs conversion, the function will
  need to dereference internal data structures.

* Add cgroup_get/put_root() and replace direct super_block->s_active
  manipulatinos with them.  These will be converted to kernfs_root
  refcnting.

* Add cgroup_get/put() and replace dget/put() on cgrp->dentry with
  them.  These will be converted to kernfs refcnting.

* Update current_css_set_cg_links_read() to use cgroup_name() instead
  of reaching into the dentry name.  The end result is the same.

These changes don't make functional differences but will make
transition to kernfs easier.

v2: Rebased on top of 0ab02ca8 ("cgroup: protect modifications to
    cgroup_idr with cgroup_mutex").
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

mm/memory-failure.c::hwpoison_filter_task() has been reaching into
cgroup to extract the associated ino to be used as a filtering
criterion.  This is an implementation detail which shouldn't be
depended upon from outside cgroup proper and is about to change with
the scheduled kernfs conversion.

This patch introduces a proper interface to determine the associated
ino, cgroup_ino(), and updates hwpoison_filter_task() to use it
instead of reaching directly into cgroup.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>

Factor out cft->ss initialization into cgroup_init_cftypes() from
cgroup_add_cftypes() and add cft->ss clearing to cgroup_rm_cftypes()
through cgroup_exit_cftypes().

This doesn't make any meaningful difference now but the two new
functions will be expanded during kernfs transition.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cftype->max_write_len is used to extend the maximum size of writes.
It's interpreted in such a way that the actual maximum size is one
less than the specified value.  The default size is defined by
CGROUP_LOCAL_BUFFER_SIZE.  Its interpretation is quite confusing - its
value is decremented by 1 and then compared for equality with max
size, which means that the actual default size is
CGROUP_LOCAL_BUFFER_SIZE - 2, which is 62 chars.

There's no point in having a limit that low.  Update its definition so
that it means the actual string length sans termination and anything
below PAGE_SIZE-1 is treated as PAGE_SIZE-1.

.max_write_len for "release_agent" is updated to PATH_MAX-1 and
cgroup_release_agent_write() is updated so that the redundant strlen()
check is removed and it uses strlcpy() instead of strcpy().
.max_write_len initializations in blk-throttle.c and cfq-iosched.c are
no longer necessary and removed.  The one in cpuset is kept unchanged
as it's an approximated value to begin with.

This will also make transition to kernfs smoother.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, cgroup_subsys->base_cftypes registration is different from
dynamic cftypes registartion.  Instead of going through
cgroup_add_cftypes(), cgroup_init_subsys() invokes
cgroup_init_cftsets() which makes use of cgroup_subsys->base_cftset
which doesn't involve dynamic allocation.

While avoiding dynamic allocation is somewhat nice, having two
separate paths for cftypes registration is nasty, especially as we're
planning to add more operations during cftypes registration.

This patch drops cgroup_init_cftsets() and cgroup_subsys->base_cftset
and registers base_cftypes using cgroup_add_cftypes().  This is done
as a separate step in cgroup_init() instead of a part of
cgroup_init_subsys().  This is because cgroup_init_subsys() can be
called very early during boot when kmalloc() isn't available yet.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Straightforward updates to cgroup name handling in preparation of
kernfs conversion.

* cgroup_alloc_name() is updated to take const char * isntead of
  dentry * for name source.

* cgroup name formatting is separated out into cgroup_file_name().
  While at it, buffer length protection is added.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Factor out new root initialization into cgroup_setup_root() from
cgroup_mount().  This makes it easier to follow and will ease kernfs
conversion.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup is scheduled to be converted to kernfs.  After conversion,
cgroup_mount() won't use the sget() machinery for finding out existing
super_blocks but instead would do that directly.  It'll search the
existing cgroupfs_roots for a matching one and create a new one iff a
match doesn't exist.  To ease such conversion, this patch restructures
locking and error handling of the function.

cgroup_tree_mutex and cgroup_mutex are grabbed from the get-go and
held until return.  For now, due to the way vfs locks nest outside
cgroup mutexes, the two cgroup mutexes are temporarily dropped across
sget() and inode mutex locking, which looks quite ridiculous; however,
these will be removed through kernfs conversion and structuring the
code this way makes the conversion less painful.

The error goto labels are consolidated to two.  This looks unwieldy
now but the next patch will factor out creation of new root into a
separate function with accompanying error handling and it'll look a
lot better.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Now that cftypes and all tree modification operations are protected by
cgroup_tree_mutex, we can drop cgroup_mutex while deleting files and
directories.  Drop cgroup_mutex over removals.

This doesn't make any noticeable difference now but is to help kernfs
conversion.  In kernfs, removals are sync points which drain in-flight
operations as those operations would grab cgroup_mutex, trying to
delete under cgroup_mutex would deadlock.  This can be resolved by
just holding the outer cgroup_tree_mutex which nests outside both
kernfs active reference and cgroup_mutex.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently cgroup uses combination of inode->i_mutex'es and
cgroup_mutex for synchronization.  With the scheduled kernfs
conversion, i_mutex'es will be removed.  Unfortunately, just using
cgroup_mutex isn't possible.  All kernfs file and syscall operations,
most of which require grabbing cgroup_mutex, will be called with
kernfs active ref held and, if we try to perform kernfs removals under
cgroup_mutex, it can deadlock as kernfs_remove() tries to drain the
target node.

Let's introduce a new outer mutex, cgroup_tree_mutex, which protects
stuff used during hierarchy changing operations - cftypes and all the
operations which may affect the cgroupfs.  It also covers css
association and iteration.  This allows cgroup_css(), for_each_css()
and other css iterators to be called under cgroup_tree_mutex.  The new
mutex will nest above both kernfs's active ref protection and
cgroup_mutex.  By protecting tree modifications with a separate outer
mutex, we can get rid of the forementioned deadlock condition.

Actual file additions and removals now require cgroup_tree_mutex
instead of cgroup_mutex.  Currently, cgroup_tree_mutex is never used
without cgroup_mutex; however, we'll soon add hierarchy modification
sections which are only protected by cgroup_tree_mutex.  In the
future, we might want to make the locking more granular by better
splitting the coverages of the two mutexes.  For now, this should do.

v2: Rebased on top of 0ab02ca8 ("cgroup: protect modifications to
    cgroup_idr with cgroup_mutex").
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

css_from_dir() returns the matching css (cgroup_subsys_state) given a
dentry and subsystem.  The function doesn't pin the css before
returning and requires the caller to be holding RCU read lock or
cgroup_mutex and handling pinning on the caller side.

Given that users of the function are likely to want to pin the
returned css (both existing users do) and that getting and putting
css's are very cheap, there's no reason for the interface to be tricky
like this.

Rename css_from_dir() to css_tryget_from_dir() and make it try to pin
the found css and return it only if pinning succeeded.  The callers
are updated so that they no longer do RCU locking and pinning around
the function and just use the returned css.

This will also ease converting cgroup to kernfs.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>

Pull for-3.14-fixes to receive 0ab02ca8 ("cgroup: protect
modifications to cgroup_idr with cgroup_mutex") prior to kernfs
conversion series to avoid non-trivial conflicts.
Signed-off-by: NTejun Heo <tj@kernel.org>

Setup cgroupfs like this:
  # mount -t cgroup -o cpuacct xxx /cgroup
  # mkdir /cgroup/sub1
  # mkdir /cgroup/sub2

Then run these two commands:
  # for ((; ;)) { mkdir /cgroup/sub1/tmp && rmdir /mnt/sub1/tmp; } &
  # for ((; ;)) { mkdir /cgroup/sub2/tmp && rmdir /mnt/sub2/tmp; } &

After seconds you may see this warning:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 25243 at lib/idr.c:527 sub_remove+0x87/0x1b0()
idr_remove called for id=6 which is not allocated.
...
Call Trace:
 [<ffffffff8156063c>] dump_stack+0x7a/0x96
 [<ffffffff810591ac>] warn_slowpath_common+0x8c/0xc0
 [<ffffffff81059296>] warn_slowpath_fmt+0x46/0x50
 [<ffffffff81300aa7>] sub_remove+0x87/0x1b0
 [<ffffffff810f3f02>] ? css_killed_work_fn+0x32/0x1b0
 [<ffffffff81300bf5>] idr_remove+0x25/0xd0
 [<ffffffff810f2bab>] cgroup_destroy_css_killed+0x5b/0xc0
 [<ffffffff810f4000>] css_killed_work_fn+0x130/0x1b0
 [<ffffffff8107cdbc>] process_one_work+0x26c/0x550
 [<ffffffff8107eefe>] worker_thread+0x12e/0x3b0
 [<ffffffff81085f96>] kthread+0xe6/0xf0
 [<ffffffff81570bac>] ret_from_fork+0x7c/0xb0
---[ end trace 2d1577ec10cf80d0 ]---

It's because allocating/removing cgroup ID is not properly synchronized.

The bug was introduced when we converted cgroup_ida to cgroup_idr.
While synchronization is already done inside ida_simple_{get,remove}(),
users are responsible for concurrent calls to idr_{alloc,remove}().

tj: Refreshed on top of b58c8998 ("cgroup: fix error return from
cgroup_create()").

Fixes: 4e96ee8e ("cgroup: convert cgroup_ida to cgroup_idr")
Cc: <stable@vger.kernel.org> #3.12+
Reported-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Pending kernfs conversion depends on kernfs improvements in
driver-core-next.  Pull it into for-3.15.
Signed-off-by: NTejun Heo <tj@kernel.org>

Pending kernfs conversion depends on fixes in for-3.14-fixes.  Pull it
into for-3.15.
Signed-off-by: NTejun Heo <tj@kernel.org>

cgroup_root_mutex was added to avoid deadlock involving namespace_sem
via cgroup_show_options().  It added a lot of overhead for the small
purpose of it and, because it's nested under cgroup_mutex, it has very
limited usefulness.  The previous patch made cgroup_show_options() not
use cgroup_root_mutex, so nobody needs it anymore.  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup_show_options() grabs cgroup_root_mutex to protect the options
changing while printing; however, holding root_mutex or not doesn't
really make much difference for the function.  subsys_mask can be
atomically tested and most of the options aren't allowed to change
anyway once mounted.

The only field which needs synchronization is ->release_agent_path.
This patch introduces a dedicated spinlock to synchronize accesses to
the field and drops cgroup_root_mutex locking from
cgroup_show_options().  The next patch will remove cgroup_root_mutex.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

It's no longer referenced outside cgroup core, so renaming is easy.
Let's rename it for consistency & brevity.

This patch is pure rename.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>