The function handle_ldf_stq() deals with no-fault ASI
loads and stores, but restricts fp registers to quad
word regs (ie, %f0, %f4 etc). This is valid for the
STQ case, but unnecessarily restricts loads, which
may be single precision, double, or quad. This results
in SIGFPE being raised for this instruction when the
source address is invalid:
	ldda [%g1] ASI_PNF, %f2
but not for this one:
	ldda [%g1] ASI_PNF, %f4
The validation check for quad register is moved to
within the STQ block so that loads are not affected
by the check.

An additional problem is that the calculation for freg
is incorrect when a single precision load is being
handled. This causes %f1 to be seen as %f32 etc,
and the incorrect register ends up being overwritten.
This code sequence demonstrates the problem:
	ldd [%g1], %f32		! g1 = valid address
	lda [%i3] ASI_PNF, %f1  ! i3 = invalid address
	std %f32, [%g1]
This is corrected by basing the freg calculation on
the load size.
Signed-off-by: NRob Gardner <rob.gardner@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The value returned from iommu_tbl_range_alloc() (and the one passed
in as a fourth argument to iommu_tbl_range_free) is not a DMA address,
it is rather an index into the IOMMU page table.

Therefore using DMA_ERROR_CODE is not appropriate.

Use a more type matching error code define, IOMMU_ERROR_CODE, and
update all users of this interface.
Reported-by: NAndre Przywara <andre.przywara@arm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From 7d8a508d74e6cacf0f2438286a959c3195a35a37 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Fri, 7 Aug 2015 20:26:12 +0200
Subject: [PATCH] sparc64: use ENTRY/ENDPROC in VISsave

Commit 44922150
("sparc64: Fix userspace FPU register corruptions") left a
stale globl symbol which was not used.

Fix this and introduce use of ENTRY/ENDPROC
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ASI_ST_BLKINIT_MRU_S is incorrectly defined as 0xf2 when it
should be 0xf3 according to section 10.3.1 of the Sparc
Architecture manual.
Signed-off-by: NRob Gardner <rob.gardner@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull sparc fix from David Miller:
 "FPU register corruption bug fix"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix userspace FPU register corruptions.

Merge fixes from Andrew Morton:
 "21 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits)
  writeback: fix initial dirty limit
  mm/memory-failure: set PageHWPoison before migrate_pages()
  mm: check __PG_HWPOISON separately from PAGE_FLAGS_CHECK_AT_*
  mm/memory-failure: give up error handling for non-tail-refcounted thp
  mm/memory-failure: fix race in counting num_poisoned_pages
  mm/memory-failure: unlock_page before put_page
  ipc: use private shmem or hugetlbfs inodes for shm segments.
  mm: initialize hotplugged pages as reserved
  ocfs2: fix shift left overflow
  kthread: export kthread functions
  fsnotify: fix oops in fsnotify_clear_marks_by_group_flags()
  lib/iommu-common.c: do not use 0xffffffffffffffffl for computing align_mask
  mm/slub: allow merging when SLAB_DEBUG_FREE is set
  signalfd: fix information leak in signalfd_copyinfo
  signal: fix information leak in copy_siginfo_to_user
  signal: fix information leak in copy_siginfo_from_user32
  ocfs2: fix BUG in ocfs2_downconvert_thread_do_work()
  fs, file table: reinit files_stat.max_files after deferred memory initialisation
  mm, meminit: replace rwsem with completion
  mm, meminit: allow early_pfn_to_nid to be used during runtime
  ...

If we have a series of events from userpsace, with %fprs=FPRS_FEF,
like follows:

ETRAP
	ETRAP
		VIS_ENTRY(fprs=0x4)
		VIS_EXIT
		RTRAP (kernel FPU restore with fpu_saved=0x4)
	RTRAP

We will not restore the user registers that were clobbered by the FPU
using kernel code in the inner-most trap.

Traps allocate FPU save slots in the thread struct, and FPU using
sequences save the "dirty" FPU registers only.

This works at the initial trap level because all of the registers
get recorded into the top-level FPU save area, and we'll return
to userspace with the FPU disabled so that any FPU use by the user
will take an FPU disabled trap wherein we'll load the registers
back up properly.

But this is not how trap returns from kernel to kernel operate.

The simplest fix for this bug is to always save all FPU register state
for anything other than the top-most FPU save area.

Getting rid of the optimized inner-slot FPU saving code ends up
making VISEntryHalf degenerate into plain VISEntry.

Longer term we need to do something smarter to reinstate the partial
save optimizations.  Perhaps the fundament error is having trap entry
and exit allocate FPU save slots and restore register state.  Instead,
the VISEntry et al. calls should be doing that work.

This bug is about two decades old.
Reported-by: NJames Y Knight <jyknight@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull amdgpu fixes from Alex Deucher:
 "Just a few amdgpu fixes to make sure we report the proper firmware
  information and number of render buffers to userspace and a typo in a
  debugging function"

[ Pulling directly from Alex since Dave Airlie is on vacation  - Linus ]

* 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: set fw_version and feature_version for smu fw loading
  drm/amdgpu: add feature version for SDMA ucode
  drm/amdgpu: add feature version for RLC and MEC v2
  drm/amdgpu: increment queue when iterating on this variable.
  drm/amdgpu: fix rb setting for CZ

Pull TDA998x i2c driver fixes from Russell King:
 "This fixes the double-checksumming of the AVI infoframe which was
  resulting in the checksum always being zero.  It went unnoticed as
  none of my HDMI devices had a problem with this"

[ Pulling directly from rmk since Dave Airlie is on vacation  - Linus ]

* 'drm-tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  drm/i2c: tda998x: fix bad checksum of the HDMI AVI infoframe

The initial value of global_wb_domain.dirty_limit set by
writeback_set_ratelimit() is zeroed out by the memset in
wb_domain_init().
Signed-off-by: NRabin Vincent <rabin.vincent@axis.com>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now page freeing code doesn't consider PageHWPoison as a bad page, so by
setting it before completing the page containment, we can prevent the
error page from being reused just after successful page migration.

I added TTU_IGNORE_HWPOISON for try_to_unmap() to make sure that the
page table entry is transformed into migration entry, not to hwpoison
entry.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dean Nelson <dnelson@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The race condition addressed in commit add05cec ("mm: soft-offline:
don't free target page in successful page migration") was not closed
completely, because that can happen not only for soft-offline, but also
for hard-offline.  Consider that a slab page is about to be freed into
buddy pool, and then an uncorrected memory error hits the page just
after entering __free_one_page(), then VM_BUG_ON_PAGE(page->flags &
PAGE_FLAGS_CHECK_AT_PREP) is triggered, despite the fact that it's not
necessary because the data on the affected page is not consumed.

To solve it, this patch drops __PG_HWPOISON from page flag checks at
allocation/free time.  I think it's justified because __PG_HWPOISON
flags is defined to prevent the page from being reused, and setting it
outside the page's alloc-free cycle is a designed behavior (not a bug.)

For recent months, I was annoyed about BUG_ON when soft-offlined page
remains on lru cache list for a while, which is avoided by calling
put_page() instead of putback_lru_page() in page migration's success
path.  This means that this patch reverts a major change from commit
add05cec about the new refcounting rule of soft-offlined pages, so
"reuse window" revives.  This will be closed by a subsequent patch.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dean Nelson <dnelson@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"non anonymous thp" case is still racy with freeing thp, which causes
panic due to put_page() for refcount-0 page.  It seems that closing up
this race might be hard (and/or not worth doing,) so let's give up the
error handling for this case.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dean Nelson <dnelson@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When memory_failure() is called on a page which are just freed after
page migration from soft offlining, the counter num_poisoned_pages is
raised twi= ce.  So let's fix it with using TestSetPageHWPoison.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dean Nelson <dnelson@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recently I addressed a few of hwpoison race problems and the patches are
merged on v4.2-rc1.  It made progress, but unfortunately some problems
still remain due to less coverage of my testing.  So I'm trying to fix
or avoid them in this series.

One point I'm expecting to discuss is that patch 4/5 changes the page
flag set to be checked on free time.  In current behavior, __PG_HWPOISON
is not supposed to be set when the page is freed.  I think that there is
no strong reason for this behavior, and it causes a problem hard to fix
only in error handler side (because __PG_HWPOISON could be set at
arbitrary timing.) So I suggest to change it.

With this patchset, hwpoison stress testing in official mce-test
testsuite (which previously failed) passes.

This patch (of 5):

In "just unpoisoned" path, we do put_page and then unlock_page, which is
a wrong order and causes "freeing locked page" bug.  So let's fix it.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dean Nelson <dnelson@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The shm implementation internally uses shmem or hugetlbfs inodes for shm
segments.  As these inodes are never directly exposed to userspace and
only accessed through the shm operations which are already hooked by
security modules, mark the inodes with the S_PRIVATE flag so that inode
security initialization and permission checking is skipped.

This was motivated by the following lockdep warning:

  ======================================================
   [ INFO: possible circular locking dependency detected ]
   4.2.0-0.rc3.git0.1.fc24.x86_64+debug #1 Tainted: G        W
  -------------------------------------------------------
   httpd/1597 is trying to acquire lock:
   (&ids->rwsem){+++++.}, at: shm_close+0x34/0x130
   but task is already holding lock:
   (&mm->mmap_sem){++++++}, at: SyS_shmdt+0x4b/0x180
   which lock already depends on the new lock.
   the existing dependency chain (in reverse order) is:
   -> #3 (&mm->mmap_sem){++++++}:
        lock_acquire+0xc7/0x270
        __might_fault+0x7a/0xa0
        filldir+0x9e/0x130
        xfs_dir2_block_getdents.isra.12+0x198/0x1c0 [xfs]
        xfs_readdir+0x1b4/0x330 [xfs]
        xfs_file_readdir+0x2b/0x30 [xfs]
        iterate_dir+0x97/0x130
        SyS_getdents+0x91/0x120
        entry_SYSCALL_64_fastpath+0x12/0x76
   -> #2 (&xfs_dir_ilock_class){++++.+}:
        lock_acquire+0xc7/0x270
        down_read_nested+0x57/0xa0
        xfs_ilock+0x167/0x350 [xfs]
        xfs_ilock_attr_map_shared+0x38/0x50 [xfs]
        xfs_attr_get+0xbd/0x190 [xfs]
        xfs_xattr_get+0x3d/0x70 [xfs]
        generic_getxattr+0x4f/0x70
        inode_doinit_with_dentry+0x162/0x670
        sb_finish_set_opts+0xd9/0x230
        selinux_set_mnt_opts+0x35c/0x660
        superblock_doinit+0x77/0xf0
        delayed_superblock_init+0x10/0x20
        iterate_supers+0xb3/0x110
        selinux_complete_init+0x2f/0x40
        security_load_policy+0x103/0x600
        sel_write_load+0xc1/0x750
        __vfs_write+0x37/0x100
        vfs_write+0xa9/0x1a0
        SyS_write+0x58/0xd0
        entry_SYSCALL_64_fastpath+0x12/0x76
  ...
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Reported-by: NMorten Stevens <mstevens@fedoraproject.org>
Acked-by: NHugh Dickins <hughd@google.com>
Acked-by: NPaul Moore <paul@paul-moore.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 92923ca3 ("mm: meminit: only set page reserved in the
memblock region") broke memory hotplug which expects the memmap for
newly added sections to be reserved until onlined by
online_pages_range().  This patch marks hotplugged pages as reserved
when adding new zones.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NDavid Vrabel <david.vrabel@citrix.com>
Tested-by: NDavid Vrabel <david.vrabel@citrix.com>
Cc: Nathan Zimmer <nzimmer@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When using a large volume, for example 9T volume with 2T already used,
frequent creation of small files with O_DIRECT when the IO is not
cluster aligned may clear sectors in the wrong place.  This will cause
filesystem corruption.

This is because p_cpos is a u32.  When calculating the corresponding
sector it should be converted to u64 first, otherwise it may overflow.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>	[4.0+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The s-Par visornic driver, currently in staging, processes a queue being
serviced by the an s-Par service partition.  We can get a message that
something has happened with the Service Partition, when that happens, we
must not access the channel until we get a message that the service
partition is back again.

The visornic driver has a thread for processing the channel, when we get
the message, we need to be able to park the thread and then resume it
when the problem clears.

We can do this with kthread_park and unpark but they are not exported
from the kernel, this patch exports the needed functions.
Signed-off-by: NDavid Kershner <david.kershner@unisys.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fsnotify_clear_marks_by_group_flags() can race with
fsnotify_destroy_marks() so that when fsnotify_destroy_mark_locked()
drops mark_mutex, a mark from the list iterated by
fsnotify_clear_marks_by_group_flags() can be freed and thus the next
entry pointer we have cached may become stale and we dereference free
memory.

Fix the problem by first moving marks to free to a special private list
and then always free the first entry in the special list.  This method
is safe even when entries from the list can disappear once we drop the
lock.
Signed-off-by: NJan Kara <jack@suse.com>
Reported-by: NAshish Sangwan <a.sangwan@samsung.com>
Reviewed-by: NAshish Sangwan <a.sangwan@samsung.com>
Cc: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using a 64 bit constant generates "warning: integer constant is too
large for 'long' type" on 32 bit platforms.  Instead use ~0ul and
BITS_PER_LONG.

Detected by Andrew Morton on ARMD.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes creation of new kmem-caches after enabling
sanity_checks for existing mergeable kmem-caches in runtime: before that
patch creation fails because unique name in sysfs already taken by
existing kmem-cache.

Unlike other debug options this doesn't change object layout and could
be enabled and disabled at any time.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This function may copy the si_addr_lsb field to user mode when it hasn't
been initialized, which can leak kernel stack data to user mode.

Just checking the value of si_code is insufficient because the same
si_code value is shared between multiple signals.  This is solved by
checking the value of si_signo in addition to si_code.
Signed-off-by: NAmanieu d'Antras <amanieu@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This function may copy the si_addr_lsb, si_lower and si_upper fields to
user mode when they haven't been initialized, which can leak kernel
stack data to user mode.

Just checking the value of si_code is insufficient because the same
si_code value is shared between multiple signals.  This is solved by
checking the value of si_signo in addition to si_code.
Signed-off-by: NAmanieu d'Antras <amanieu@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This function can leak kernel stack data when the user siginfo_t has a
positive si_code value.  The top 16 bits of si_code descibe which fields
in the siginfo_t union are active, but they are treated inconsistently
between copy_siginfo_from_user32, copy_siginfo_to_user32 and
copy_siginfo_to_user.

copy_siginfo_from_user32 is called from rt_sigqueueinfo and
rt_tgsigqueueinfo in which the user has full control overthe top 16 bits
of si_code.

This fixes the following information leaks:
x86:   8 bytes leaked when sending a signal from a 32-bit process to
       itself. This leak grows to 16 bytes if the process uses x32.
       (si_code = __SI_CHLD)
x86:   100 bytes leaked when sending a signal from a 32-bit process to
       a 64-bit process. (si_code = -1)
sparc: 4 bytes leaked when sending a signal from a 32-bit process to a
       64-bit process. (si_code = any)

parsic and s390 have similar bugs, but they are not vulnerable because
rt_[tg]sigqueueinfo have checks that prevent sending a positive si_code
to a different process.  These bugs are also fixed for consistency.
Signed-off-by: NAmanieu d'Antras <amanieu@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The "BUG_ON(list_empty(&osb->blocked_lock_list))" in
ocfs2_downconvert_thread_do_work can be triggered in the following case:

ocfs2dc has firstly saved osb->blocked_lock_count to local varibale
processed, and then processes the dentry lockres.  During the dentry
put, it calls iput and then deletes rw, inode and open lockres from
blocked list in ocfs2_mark_lockres_freeing.  And this causes the
variable `processed' to not reflect the number of blocked lockres to be
processed, which triggers the BUG.
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Dave Hansen reported the following;

	My laptop has been behaving strangely with 4.2-rc2.  Once I log
	in to my X session, I start getting all kinds of strange errors
	from applications and see this in my dmesg:

        	VFS: file-max limit 8192 reached

The problem is that the file-max is calculated before memory is fully
initialised and miscalculates how much memory the kernel is using.  This
patch recalculates file-max after deferred memory initialisation.  Note
that using memory hotplug infrastructure would not have avoided this
problem as the value is not recalculated after memory hot-add.

4.1:             files_stat.max_files = 6582781
4.2-rc2:         files_stat.max_files = 8192
4.2-rc2 patched: files_stat.max_files = 6562467

Small differences with the patch applied and 4.1 but not enough to matter.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NDave Hansen <dave.hansen@intel.com>
Cc: Nicolai Stange <nicstange@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Alex Ng <alexng@microsoft.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 0e1cc95b ("mm: meminit: finish initialisation of struct pages
before basic setup") introduced a rwsem to signal completion of the
initialization workers.

Lockdep complains about possible recursive locking:
  =============================================
  [ INFO: possible recursive locking detected ]
  4.1.0-12802-g1dc51b82 #3 Not tainted
  ---------------------------------------------
  swapper/0/1 is trying to acquire lock:
  (pgdat_init_rwsem){++++.+},
    at: [<ffffffff8424c7fb>] page_alloc_init_late+0xc7/0xe6

  but task is already holding lock:
  (pgdat_init_rwsem){++++.+},
    at: [<ffffffff8424c772>] page_alloc_init_late+0x3e/0xe6

Replace the rwsem by a completion together with an atomic
"outstanding work counter".

[peterz@infradead.org: Barrier removal on the grounds of being pointless]
[mgorman@suse.de: Applied review feedback]
Signed-off-by: NNicolai Stange <nicstange@gmail.com>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Alex Ng <alexng@microsoft.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

early_pfn_to_nid() historically was inherently not SMP safe but only
used during boot which is inherently single threaded or during hotplug
which is protected by a giant mutex.

With deferred memory initialisation there was a thread-safe version
introduced and the early_pfn_to_nid would trigger a BUG_ON if used
unsafely.  Memory hotplug hit that check.  This patch makes
early_pfn_to_nid introduces a lock to make it safe to use during
hotplug.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NAlex Ng <alexng@microsoft.com>
Tested-by: NAlex Ng <alexng@microsoft.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Nicolai Stange <nicstange@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A while back, the message queue implementation in the kernel was
improved to use btrees to speed up retrieval of messages, in commit
d6629859 ("ipc/mqueue: improve performance of send/recv").

That patch introducing the improved kernel handling of message queues
(using btrees) has, as a by-product, changed the meaning of the QSIZE
field in the pseudo-file created for the queue.  Before, this field
reflected the size of the user-data in the queue.  Since, it also takes
kernel data structures into account.  For example, if 13 bytes of user
data are in the queue, on my machine the file reports a size of 61
bytes.

There was some discussion on this topic before (for example
https://lkml.org/lkml/2014/10/1/115).  Commenting on a th lkml, Michael
Kerrisk gave the following background
(https://lkml.org/lkml/2015/6/16/74):

    The pseudofiles in the mqueue filesystem (usually mounted at
    /dev/mqueue) expose fields with metadata describing a message
    queue. One of these fields, QSIZE, as originally implemented,
    showed the total number of bytes of user data in all messages in
    the message queue, and this feature was documented from the
    beginning in the mq_overview(7) page. In 3.5, some other (useful)
    work happened to break the user-space API in a couple of places,
    including the value exposed via QSIZE, which now includes a measure
    of kernel overhead bytes for the queue, a figure that renders QSIZE
    useless for its original purpose, since there's no way to deduce
    the number of overhead bytes consumed by the implementation.
    (The other user-space breakage was subsequently fixed.)

This patch removes the accounting of kernel data structures in the
queue.  Reporting the size of these data-structures in the QSIZE field
was a breaking change (see Michael's comment above).  Without the QSIZE
field reporting the total size of user-data in the queue, there is no
way to deduce this number.

It should be noted that the resource limit RLIMIT_MSGQUEUE is counted
against the worst-case size of the queue (in both the old and the new
implementation).  Therefore, the kernel overhead accounting in QSIZE is
not necessary to help the user understand the limitations RLIMIT imposes
on the processes.
Signed-off-by: NMarcus Gelderie <redmnic@gmail.com>
Acked-by: NDoug Ledford <dledford@redhat.com>
Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com>
Acked-by: NDavidlohr Bueso <dbueso@suse.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: John Duffy <jb_duffy@btinternet.com>
Cc: Arto Bendiken <arto@bendiken.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The fw_version and feature_verion should be set correctly when the
firmwares are loaded by SMU on Tonga/Carrzio/Iceland
Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Expose feature version to user space for RLC/MEC/MEC2 ucode as well

v2: fix coding style
Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

gfx_v7_0_print_status contains a for loop on variable queue which does
not update this variable between each iteration.  This is bug is
reported by clang while building allmodconfig LLVMLinux on x86_64:

    drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:5126:19: error: variable
    'queue' used in loop condition not modified in loop body
    [-Werror,-Wloop-analysis]
                for (queue = 0; queue < 8; i++) {
                                ^~~~~

Fix this by incrementing variable queue instead of i in this loop.
Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Always set num_rbs to 2 for CZ.  The 1 RB parts are often harvest
configs.  The will get sorted out in mesa when we program
PA_SC_RASTER_CONFIG[_1].
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Pull KVM fixes from Paolo Bonzini:
 "Just two very small & simple patches"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: MTRR: Use default type for non-MTRR-covered gfn before WARN_ON
  KVM: s390: Fix hang VCPU hang/loop regression

The patch was munged on commit to re-order these tests resulting in
excessive warnings when trying to do device assignment.  Return to
original ordering: https://lkml.org/lkml/2015/7/15/769

Fixes: 3e5d2fdc ("KVM: MTRR: simplify kvm_mtrr_get_guest_memory_type")
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The commit 8c7a075d
"drm/i2c: tda998x: use drm_hdmi_avi_infoframe_from_display_mode()"
also uses hdmi_avi_infoframe_pack() to create the AVI infoframe.
This function sets the checksum of the frame and this breaks
the second calculation of the checksum done in tda998x_write_if().

Fixes: 8c7a075d ("drm/i2c: tda998x: use drm_hdmi_avi_infoframe_from_display_mode()")
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Pull md fixes from Neil Brown:
 "Three more fixes for md in 4.2

  Mostly corner-case stuff.

  One of these patches is for a CVE: CVE-2015-5697

  I'm not convinced it is serious (data leak from CAP_SYS_ADMIN ioctl)
  but as people seem to want to back-port it, I've included a minimal
  version here.  The remainder of that patch from Benjamin is
  code-cleanup and will arrive in the 4.3 merge window"

* tag 'md/4.2-rc5-fixes' of git://neil.brown.name/md:
  md/raid5: don't let shrink_slab shrink too far.
  md: use kzalloc() when bitmap is disabled
  md/raid1: extend spinlock to protect raid1_end_read_request against inconsistencies

Pull nfsd fixes from Bruce Fields.

* 'for-4.2' of git://linux-nfs.org/~bfields/linux:
  nfsd: do nfs4_check_fh in nfs4_check_file instead of nfs4_check_olstateid
  nfsd: Fix a file leak on nfsd4_layout_setlease failure
  nfsd: Drop BUG_ON and ignore SECLABEL on absent filesystem